'nvram boot-args' returns error

Similar Questions

• "parser error message returned error 0 x 80070017", any help?

  error message occurs at startup and at random after, reads "error analysis of the C:\WINDOWS\Nicrosoft.NET\Framework\v1.1.4332\config\machine.config Parser returned error 0 x 80070017", any help?

  Hi jacquemerritt,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to repair an installation existing.NET Framework

  http://support.Microsoft.com/kb/306160

• Component returned error code: 0 x 80570015

  Loading Firefox, I get this error

  Component returned error code: 0 x 80570015 (NS_ERROR_XPC_CI_RETURNED_FAILURE) [nsIJSCID.createInstance]

  I click OK and Firefox loads as if nothing is wrong - but it's embarrassing

  Hello OleDad127, this error message is probably triggered by one of your extensions - please disable them one by one (and reboot after each step) to know that could be causing it.

  then please directly contact the developers of extension through the channels of support they provide - they can probably give you more detailed advice and are the only ones who can fix bugs or make necessary adjustments in the addon for new versions of firefox. Thank you...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• HP Mini 1000MiE tranfer files - net usershare returned error 255

  My mini was just delivered. So I try to transfer files from my old Dell Latitude on Ubuntu to the Mini on a Netgear wireless router

  I put the files on the Dell to share. But the Mini does'nt find them well that he does not see a corresponding to the Dell printer Windows workgroup.

  The Mini does none of the files in the working group.

  When I tried to go the otherway to see if the Dell could see files shared on the Mini. I received a request to install 'actions' on the Mini and now when I try to share a file this error message.

  'net usershare' returned error 255: net usershare: cannot open/var/lib/samba/usershares usershare directory. Error Permission denied
  You may not create a usershare. Ask your administrator to grant you permissions to create a share.

  Now, I have two groups of windows work visible on my Linux machines but no files inside.

  How can I transfer files between two computers on Linux via a wireless network? It will not be a big problem.

  I am new to the Mini, but not in Ubuntu. I have not found how to open a command line terminal on this machine yet.

  I would really appreciate help on this issue.

  Transfer files between linux machines using a program called ssh. I found information on the web. It was not very difficult.

  Never got the two machines to connect using the shared windows resources, now I don't have to.

  Error 255 was a matter of a box under 'users' to allow file sharing.

  I also found the command line terminal hidden but available.

  Had a difficult start with the crumb of the Mini, but I am more familiar with linux OS crumbs now.

• LaunchExecutableEx returns error - 43

  I use LaunchExecutableEx in a GUI application to launch telnet.exe. Since the beginning of this application running on Windows 7, we started having a few problems. The LaunchExecutableEx returns error User Interface-43 (the text shows that "the attempted operation cannot be performed so that a group of popup is active").

  Anyone who has the experience of similar problems and how to solve?

  Thank you!

  
  

• Is short boot fail reason (error 1000-0146) Office of glitter and high cpu?

  Dell inspiron 6000. Windows xp professional sp 3. Three weeks ago, my computer started loud beep on startup and sparkle of the desktop icons. The touchpad has stopped working for a while, but most of the time which is fixed. I installed malwarebytes' eliminating about four Trojan horses and tried to update all the drivers. I did a restore of the system about 3 times. When I ran a test drive, there was a failed test short boot 1000-0146 error. When my app icons start to Flash my cpu jumps to 100%. Pressing any key usually stopped for a bit. Is this a compatibility issue with my software or the failure of short boot is the cause. Help!

  Hi Nutmeg30,

  • Did you the latest changes on the computer?
  • You have security software installed on the computer?

  Learn more about the test of startup failures see link below on the Dell site and check if it helps.

  Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_300428&isLegacy=true

  It is possible that some third-party programs installed on the computer is causing the flickering and high CPU utilization issue.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• Configuration of the windows updates failed, returning error Exchange

  I have a laptop windows 8.  Whenever I run windows updates, I get the error message "failed to setup of the windows updates, returning error changes.  I tried the windows update troubleshooting tool and download the updates manually but still no change.   Is there a solution to this?

  Thank you.   Often, when I try to run windows updates I get error like 80242FFF codes; 800703F1.

  Hi Zurkon,

  Thank you for your update on the issue.

  If you receive Windows Update error 80073712 0 x or 80073712, it means that a file needed by Windows Update is corrupted or missing. Windows has tools that can help you solve this problem of troubleshooting. I would suggest trying the following methods and check if the problem persists.

  Method 1: Run the Windows Update Troubleshooter

  • Run the Windows Update utility, then open Windows Update and try installing the update again.

  Method 2: Run the DISM tool

  1. Enter in the right edge of the screen and then click on search.
     (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click Find.)

  2. Enter command prompt in the search box.

  3. In the list of results, slide down on or right click command prompt, and then press or click Run as administrator.

  4. In the administrator: command prompt window, enter the following commands. Press ENTER after each command:

     DISM.exe / Online/Cleanup-image /Scanhealth

     DISM.exe / Online/Cleanup-image /Restorehealth

  5. To close the administrator: command prompt window, type Exit and press ENTER.

  6. Run Windows Update again.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Reg:GetMatchingArt() returns error (error no = 1146045247) in CS6 Plugin with Panel

  Dear friends,

  
  I am facing a problem, GetMatchingArt() returns error (error no = 1146045247) in CS6 Plugin with Panel.

  I read an earlier discussion on error no 1146045247.Then I try adding PushAppContext() before Create() metod of the Panel and PopAppContext() after Create() metod of the Panel, stil, the problem is not fixed.

  Please give me your suggestions to solve this problem.
  Note: prerequisite: I have to choose an art before calling GetMatchingArt() method.
  Plug type in GetMatchingArt() is kAnyArt.
  The nummatches Argument returns 0 and error (error no = 1146045247).

  
  Thank you friends.

  For CS6 and above the panels, you must call Push/PopAppContext (), but you do it in the procedure for notification of each item in the control panel user interface, not during the creation of the Group of experts.

• Deployment failed due to one or more of the returned errors

  Hi all

  JDev: 12.1.3

  I am getting below error while deploying the application in the Android emulator

  Installation of the platform:

  Location of the SDK: D:\android-sdk-windows

  Location of Android platform: D:\android-sdk-windows\platforms\android-17

  Android built location: D:\android-sdk-windows\build-tools\17.0.0

  Error

  [17: 28:50] copy of the adfmf file - manifest.properties...

  [17: 28:50] start to archive the folder "/ C:/JDeveloper/mywork/CalendarApp/deploy/Android2/java_res/assets / ' to 'assets.zip '...

  [17: 28:54] deployment of Cordova Plugins...

  [17: 28:54] copy the plugin "CalendarPlugin" resources of C:\JDeveloper\mywork\CalendarApp\ApplicationController\src\plugins\CalendarPlugin\Android\res to C:\JDeveloper\mywork\CalendarApp\deploy\Android2\res...

  [17: 28:54] copy the plugin "CalendarPlugin' active C:\JDeveloper\mywork\CalendarApp\ApplicationController\src\plugins\CalendarPlugin\Android\assets to C:\JDeveloper\mywork\CalendarApp\deploy\Android2\java_res\assets...

  [17: 28:54] Creation of unsigned Android application file...

  [17: 28:54] run command line: ["D:\android-sdk-windows\build-tools\17.0.0\aapt", p, - debug mode - f, - m, - J, "C:\JDeveloper\mywork\CalendarApp\deploy\Android2\src", "C:\JDeveloper\mywork\CalendarApp\deploy\Android2\AndroidManifest.xml" -, M, - min-sdk-version, 15-, target-sdk-version, 9, - name version, 1.0, - version-code, 1, - extra-packages, oracle.idm.mobile, - F, 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\CalendarApp.apk', - I, 'D:\android-sdk-windows\platforms\android-17\android.jar', - S, "C:\JDeveloper\mywork\CalendarApp\deploy\Android2\res"] "C:\JDeveloper\mywork\CalendarApp\deploy\Android2\java_res"]

  Invalid resource directory name [17: 28:54]: C:\JDeveloper\mywork\CalendarApp\deploy\Android2\res/readme.txt

  [17: 28:54] command-line execution failed (return code: 1).

  [17: 28:54] run command line: 'D:\android-sdk-windows\build-tools\17.0.0\aapt' p - debug mode - f m-J 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\src' m 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\AndroidManifest.xml' - min-sdk-version 15 - target-sdk-version 9 - name - version 1.0 - version-code 1 - oracle.idm.mobile extra-packages - F 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\CalendarApp.apk'-I 'D:\android-sdk-windows\platforms\android-17\android.jar"s 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\res' 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\java_res '.

  [17: 28:54] Server Android Debug bridge closure...

  [17: 28:55] undeployment.

  [17: 28:55] - incomplete deployment.

  [17: 28:55] deployment failed due to one or more errors returned by "D:\android-sdk-windows\build-tools\17.0.0\aapt".  What follows is a summary of the returned error:

  Command-line execution failed (return code: 1).

  Hi Richard, Arun

  Problem has been solved now.

  Question is is that I created a folder for the project of jdev. Created file's readme default text in it.

  Causing the problem while deploying the application

  Once, I deleted all the readme .txt file in default the entire file. Problem solved.

  Thanks for the effort.

  Kind regards

  Krishan

• Boot process Scheduler error

  People,

  Hello. I am running Oracle 11 g database 1 material with Oracle Linux 5 operating system.

  My Internet Architecture of PeopleSoft is WebLogic/Tuxedo/PeopleTools8.53.

  After that I started the application server with 8 process successfully, I start the process scheduler and get the error below:

  
  Starting process of the admin...

  exec BBL - one:
  CMDTUX_CAT:822: ERROR: No. BBL available, cannot start

  tmboot: warn: no available on the site linux.domain BBL.
  Will not attempt to start the process of the server on the site.

  
  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  exec tmshutdown - qy

  
  tmshutdown: internal error: CMDTUX_CAT:764: ERROR: unable to attach to BB

  
  tmboot: CMDTUX_CAT:828: ERROR: could not create the error process - fork() failed

  
  I checked the server log file current SCHDLR_0618.LOG and no message in it.

  I checked the current logfile Tuxedo TUXLOG and its content is below:

  
  Attempt to begin on field HRCS90
  105113.Linux.domain! tmadmin.8296.2885232272.-2: TMADMIN_CAT:1330: INFO: command: start - a
  105118.Linux.domain! BBL.8298.2841136176.0: 18/06/2014: Tuxedo 11.1.1.3.0, 64-bit Version, Patch level (none)
  105118.Linux.domain! BBL.8298.2841136176.0: LIBTUX_CAT:681: ERROR: failed to create the message queue
  105118.Linux.domain! BBL.8298.2841136176.0: LIBTUX_CAT:248: ERROR: function init System failure, Uunixerr =: msgget: no such file or directory
  105118.Linux.domain! BBL.8298.2841136176.0: CMDTUX_CAT:26: INFO: The BBL out of system
  105118.Linux.domain! tmboot.8297.3527355488.-2: 18/06/2014: Tuxedo, Version 11.1.1.3.0, 64-bit
  105118.Linux.domain! tmboot.8297.3527355488.-2: CMDTUX_CAT:825: ERROR: linux.domain BBL process failed with / t tperrno (TPEOS - operating system error)
  105118.Linux.domain! tmboot.8297.3527355488.-2: WARN: BBL No. available on the linux.domain site.
  Will not attempt to start the process of the server on the site.
  105126.Linux.domain! BBL.8304.4191628336.0: 18/06/2014: Tuxedo 11.1.1.3.0, 64-bit Version, Patch level (none)
  105126.Linux.domain! BBL.8304.4191628336.0: LIBTUX_CAT:334: ERROR: no BBL
  105126.Linux.domain! BBL.8304.4191628336.0: LIBTUX_CAT:248: ERROR: function init System failure, Uunixerr =
  105126.Linux.domain! tmboot.8303.4140594864.-2: 18/06/2014: Tuxedo, Version 11.1.1.3.0, 64-bit
  105126.Linux.domain! tmboot.8303.4140594864.-2: WARN: BBL No. available on the linux.domain site.
  Will not attempt to start the process of the server on the site.
  105126.Linux.domain! tmboot.8303.4140594864.-2: tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler
  105126.Linux.domain! tmboot.8303.4140594864.-2: FATAL: CMDTUX_CAT:828: ERROR: could not create the error process - fork() failed

  105126.Linux.domain! PSADMIN.8274: Attempt to end on the HRCS90 field boot

  
  My question is:

  As you can see above, CMDTUX_CAT:825 might be the operating system error or the application has outbound server.

  Can any help folk to resolve boot process scheduler error?

  
  Thanks in advance.

  1. Please check and confirm that you have configured the kernel for enough shared memory segments and sizes.

  2. If you suspect does not connect to DB and then turn on tracing and see where this default.

  3. make sure that variable departure account and environment are configured correctly.

  4. assuming you start CRP on the same machine, I see a bit of conflict - u had started the thread with the process scheduler, but in your second response, application server is referenced.

  5. entire diary will help identify the problem instead of parts of it.

• Still refuses to record a project returns error message "error loading transcode preset internal/Blu-ray NTSC SD Mpeg 2.

  Still refuses to record a project returns error message "error loading transcode preset internal/Blu-ray NTSC SD Mpeg 2.

  Its a new install of CS 4 on a new computer running windows 7 holiday it will save a project with a menu, but when I import a video file as a timeline it will not

  Odd on record.

  Make sure that you still run 'as administrator'.

  Test the installation by creating a new DVD project. Add a menu and nothing else. Record. Does it work?

• error message trying to run a clean boot "an access error was returned while trying to change a service."

  While trying to solve a problem with IE 8, I have a problem trying to run a clean boot.  When I start up I get a message on change in the config file. Click ok and sys config is displayed. Now, if I make a modification, OR not, I get an error message - "an access error was returned while attempting to change a service. You may need to log on using an administrator account to make the specified changes. "First of all I am logged on as administrator, secondly I get this error even when I select"normal start ". I used the clean boot before without problem.  Any ideas?  I am running win xp sp3.  I started having problems after the sp3 upgrade.

  Given that you are not using the standalone SP3 Installer AND since McAfee was working at the time of installation, that's what I'd do (well, I would do it only if I was almost 100% convinced there was no malware on my system):

  1. download the McAfee removal tool.

  2. download the installation file for the free version of Avira AntiVir.

  3. download the standalone SP3 Installer.

  4. download the standalone installer of IE8.

  5. physically disconnect from the Internet.

  6 turn off the automatic updates (temporarily).

  7 uninstall McAfee.

  8 run the McAfee removal tool to make sure that all other loose ends are supported.

  9 Uninstall SP3.

  10. run the system restore, select the before date SP3 has been installed.

  11 uninstall IE8 (and IE7, if necessary). Reason: It is important to be at the level of IE6.

  12 install the SP3. Reset.

  13 Installing IE8. Restart twice.

  14 install AntiVir.

  15 re - connect to the Internet.

  16. download and install the update of AntiVir.

  17 go into Windows Update and install all post-SP3 SECURITY update (stay away from any optional object).

  18 re-rockers automatic updates.

  After the back if you need links to the downloadable.

• Strange boot problem. Error 2102 UltraBay.

  I just added a mainboard renovated my T60 Widescreen (model 8743). Everything works fine except that I can't start with my CD-ROM/DVD-ROM drive in the ultrabay slot.

  The system hangs. I'm trying to get into the BIOS, the screen will not come. After 3-4 minutes, the system gives me the following message: Error initializing 2102 (and slightly more). It is basically a problem of housing Ultrabay. I can then access the BIOS. BTW, the UUID in the BIOS is set to zero. DVD players, I try are produced in 06/07 and are both the kind Multi (DVD-RW/CD-RW).

  Thus, the system boots fine with the DVD player on. Once it is running, I can insert it into the machine, Win7 records and everything works fine.

  I have extensively checked online but don't see any solutions. Any help appreciated woud. If it's a motherboard problem, I need to return it. Thank you.

  I returned the map leading to the seller after knowing that when I can't enter the BIOS with the inserted DVD is basically a hardware error. After receiving a different motherboard it solved the problem.

• Dual Boot Windows 10 error

  Greetings!

  I have a MacBook Early 2015 Pro 13 "i5 2.7 GHz, 16 GB of RAM and 128 GB SSD.

  I decided to dual boot my mac with Windows 64-bit 10 and I downloaded the file ISO 10 64-bit Windows, and when I tried to use the Bootcamp Assistant to install it, it gave me the following error message:

  

  This is clearly an iso version beyond Windows 8, I'm stumped!

  Thanks in advance for all comments and advice!

  Can validate you your ISO for the size and MD5sum as shown, using OS x Terminal?

  OpenSSL md5 Win10_1511_2_English_x64.iso

  MD5 (Win10_1511_2_English_x64. ISO) = 3ca03a2c59ae5b58ca965a345d4f2ae1

  LS - lgh Win10_1511_2_English_x64.iso

  -rw - r - r-@ 1 staff 4.2 G may 7 08:33 Win10_1511_2_English_x64.iso