Configuration of the windows updates failed, returning error Exchange

Similar Questions

• Configuration of the windows updates failed; returning from the changes

  Issue started after an automatic update. I was on a flight and had to put the laptop, so I just closed the lid to sleep there.

  Next time, he attempted to restart and was blocked at the infamous 12%. After 15 minutes, he would go to sleep, and the cycle repeated.

  After several cycles, now it just goes right to fail... Configuration page. It has been sitting there for hours.

  It is a HP Pavilion with Windows preinstalled 8 g7. It came not with a boot disk. The security software is Norton package which is preinstalled. No action to produce a response. I have not put it on the desktop by placing the cursor at the bottom left, impossible to open the search menu and power by going up to the right. Drag to the left or right doesn't matter. F8 does nothing. Windows + R does nothing. I can force a shutdown by holding the power button; turn on/off then goes to logo hp briefly and then I'm back where I was.

  2nd question, if I can get in a way the computer to answer, I can install an earlier version of Windows, as W8 does simply not reliable?

  If you want to downgrade to Windows 7, you'll first need to check if the manufacturer of your computer offer native Windows 7 drivers, otherwise you will need to think back to the computer and buy one with Windows 8 Pro to give you downgrade rights, buy a computer with Windows 7 installed (HP is running one day 4 for example on Windows 7 computers portable and desktop computers) , or learn to live with Windows 8. As to your question, try to run an automatic repair, or a refreshment resets the advanced form options. You don't mention your computer so I can not tell you how to access these services. See the manual of your computer or your computer factory support to find out how to access these functions. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• "Configuration of the Windows updates failed. Restoration of the changes

  Configuration of the failure of the updates are happening all the time and takes a long time to restore updates. Please tell us how can I prevent automatic updates.

  To avoid failure, follow these steps:

  "Configuration of the Windows updates failed. Restoration of the changes

• Message loop "the configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. »

  I had to edit this post, because I was the lack of information on my problem...

  Well that's even once...

  I decided to give maintenance to my laptop then I formatted last night then in the morning, I started today with the updates of windows (was the first thing I did, so I haven't installed programs). It started to download as 110 updates, when you're done, asked me to restart, and I did. As at other times, it configures the first 30% before restarting, and when it restarts then got stuck in the message of "Configuration of the Windows updates... failure. It takes like 20-30 minutes to restart, and when he does, still happens once, I mean the restart and the same message. So I can not connect or anything.

  Some features:
  Laptop: Toshiba Qosmio x 875
  Processor: Intel core i7-3630QM CPU 2 .40GHz
  RAM: 12 GB
  System: Windows 8 64-bit
  GPU: Nvidia GTX 670M / 3GB
  2 500 GB HARD drive, don't know the model or brand
  I have not yet installed antivirus, in fact I uninstalled Norton to install Kaspersky later, but I'm stuck with the real problem.
  I bought this laptop as 14 months ago, is the first time the problem appears.

  I have not tried certain steps of the links because some of them need to connect.

  Thank you, hope someone can help me.

  See this thread for assistance:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/failure-configuring-Windows-updates-reverting/9205aaba-BAfD-4760-8cae-26c82695136a

  Added: http://support.microsoft.com/kb/949358/en-us

  Perform a restore of the system (Windows 8, Windows 7 and Windows Vista)

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"- by a loop for hours, unable to get to the start

  Hello.

  First of all, I read this page - http://support.microsoft.com/kb/949358

  It says this - "Note if this problem occurs, it may take 30 minutes to undo changes, and then the system will display the login screen Windows.»

  But this is not true for me, I have nowhere near the logon screen. Earlier the PC rebooted, but is IMMEDIATELY returned to the exact same failure screen. There is a line.

  A few notes:

  (1) it is a G46VW mobile computer ASUS 'Republic of gamers ". I had 3 days. There is no DVD drive so I can't use any kind of boot disk.

  (2) I have no attached removable media.

  (3) I don't know how to get to any screen except that this form of failure, so do not know how to enter in a single command.

  (4) all that happens is that I see the ASUS logo, then this screen failure immediately.

  I'm panicking, it's all new. It has worked very well. I started it today, it has been updated slowly. I saw him at about 17%. Then I looked at a few hours later and saw that he was stuck in this process.

  What can I do?

  Hi James,

  I appreciate your patience and manual labor.

  You can follow the steps in the link below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. Follow these steps to resume and restore the registry.

  1. Go to Start creen and type regedit.
  2. Select regedit , then right-click on the screen.
  3. Click run as administrator.
  4. Right click on computer , then click export.
  5. In the Save in box, select the location where you want to save the backup copy to, and then type a name for the backup file in the file name box.
  6. Click Save.
  7. If something goes wrong, you can do a right click on the registry backup file and click on Merge.

  Write to us at the State of the question.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Original title: problems with updates

  I tried to install windows updates since the store won't let me update to 8.1 otherwise, but I've been miserably lacking 4 days in a row now. Commissioning Windows Update in Control Panel or the charm of parameters found 133 available updates and informs me that they will install automatically. If I then try to install progress remains at "downloading 0 KB", after a while updates are shown as installation. When the installation is completed I'm prompted to restart my pc. After the reboot if I'm greeted by the "Failure configuring Windows updates" screen for about an hour, then I'm able to reconnect to the desktop computer. I've been searching the forums for similar problems looking for an answer and trying different solutions, such as:

  Stop the update service then renaming or deleting the folder C:\Windows\SoftwareDistribution. No positive results on this one.

  Using SFC and DISM, first came up with my system is clean, the second did find and fix corrupt elements of store, but the problem persists.

  Download the tool for troubleshooting Windows Update from Microsoft page, who reported finding and repairing problens with service, but again without success.

  Reduce the installed updates at a time, in the instance that Windows can't handle most of the many updates at the same time. I tried this and it seemed to go well, but a strange point of interest that is so annoying is that several edits I checked are installing somehow, even if it is the only example that shows the number of updates being installed before restarting. Yet I always comes to the same conclusion. Failure of Windows updates the screen. What should I do?

  Hello

  Please update us with the State of the question. We apologize for the delay in responding

  1. You have a disk to install for Windows 8?
  2. Can you please explain what did you mean by update failed?
  3. Have you an error message when the update failed?

  I propose to perform the refresh once more using the Installation of Windows 8 disc, but before to perform updating please follow the procedure below

  Step 1: Repair of drive

  One of the best ways that you can check the alteration in the hard is to run a check disk on this subject. Please follow the steps below to repair the disk using the disk check.

  1. Open This PC by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), recording this PC in the search box, and then tapping or clicking on This PC.
  2. Press on and hold or click the drive that you want to repairand then tap or click Properties.
  3. Tap or click the Tools tab, and then, under error-checking, tap or click check.   You may be prompted for an administrator password or to confirm your choice.
  4. Follow the instructions. You may have to restart your PC after that error checking is complete.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Step 2: command tool (DISM) deployment image Service and management.

  By running this command, we can retrieve or modify information in an image. To run the DISM command, please follow the steps below:

  1. Go to the Windows Start menu.
  2. Type cmd on the keyboard.
  3. Right-click on the program from the command prompt and choose Run as administrator.
  4. The command prompt dialog box.
  5. Type the command Dism.exe / online/cleanup-image/Restore health and press ENTER.
  6. Wait for the command to run which can take about 30 minutes.
  7. After running the command, please try to make the backup of the system.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Configuration of the windows updates failed - stop restart

  Bought a new laptop and have to restart. Now, I received the message "failure of windows updates changes in recovery. Do not turn off your computer '. It restarts so subsequently and has just the same, I can't return to my laptop computer desktop screen! Help!

  Hello Garble,

  Thank you our writing about Microsoft Community.

  Have you tried the steps of troubleshooting described in the Microsoft Article in the post above?

  In case you have tried the steps of troubleshooting described in the article and which don't you did not help to solve the problem, you can try the steps below.

  Boot from the DVD of Windows 8 by tapping the F12 key permanently at the time of the restart, select your keyboard and language options, select repair your computer, and then select command prompt.  At the prompt, run the following command:

  DISM image:c:------/ Get-Packages

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: Package_for_KB978262 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.0
  Status: installed
  Output type: security update
  Install time: 02-11-2010 13:01

  Find the most recent and then make a note of the identity of the package.

  Then run:

  image:c dism:------/ Remove-Package /PackageName:Package_for_KB978262~31bf3856ad364e35~x86~~6.1.1.0 (name of the update from the previous step)

  Until it is complete, you will get a status of the collection.  Then restart your PC.

  You want to start with the most recent and remove them one at a time to find the update problem.

  Hope the helps of information provided. We know the State of the question.

  Thank you.

• "Configuration of the Windows updates failed. Restoration of the changes. Error in don't turn off your computer. "

  My computer is donloading all updates recommended by Microsoft Windows, but do not set up correctly and that their withdrawal all the time. The problem started on 11/13/2013. I not did something to my computer that can change the setting of my computer either. I'd highly appreciate your advice on what I need to do to take my computer back to the State it was before. I also tried the system restore but failed to solve the problem

  A few suggestions here:

  http://support.Microsoft.com/kb/949358/en-AU

• Error Windows Updates 'configuration of Windows updates fail, returning of the changes.

  Updates to the title: original Windows.

  That means 'configuration of the Windows updates fail, returning from changes '? My laptop has been updated but got stuck on 12%, and would not go further. It is restarted 3 times and only went up to 12%.

  Was actually able to solve this problem through more research. It turns out that his receiver of wireless mouse and a SD card was stalled the installation program. I don't know why but I turned off the machine (long press the button), remove, checked all other ports, block tire and cord then put back the battery and card, turned on and it ran through the installer without problem.

• "Failure of configuration of the windows updates". error: WindowsUpdate_80070003 / 0 x 80070003

  Original title:

  "Failure of configuration of the windows updates".

  Hello

  I use Windows 8 and updated to 8.1 last month after graduating from the messages on HP laptop. As soon as I updated to 8.1 it stopped working correctly. It has become very slow and I was unable to perform any task. I went back to Windows 8, once I had this option. Since then, I get this error message «Failure of configuration updates windows.» Restoration of the changes. Do not turn off your computer. »

  I also tried the clean boot troubleshooting mentioned here: http://support.microsoft.com/kb/929135

  However, I get this error: WindowsUpdate_80070003 / 0 x 80070003

  Please help ASAP!

  Hi John,.

  I will try to help you with this question.

  Thank you for the information provided. Coming to the question I would like you try these steps and check if that helps.

  Method 1:

  Try the steps from the following link and check if that helps.

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  If you still experience the issue after trying the steps in the above link, try the following steps:

  Method 2:

  See the following article try the steps that you have not yet tried and check if that helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358 

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Make sure that you back up the data on the computer before performing all the troubleshooting steps.

  Method 3:

  If the previous step fails then please go ahead and try the following steps:

  I suggest to rename the pending.xml file, and then change the registry.

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting, and then select Advanced Options.

  d. Select the prompt option.

  e. Once you open the command prompt, enter the following command and press ENTER.

  f. type cd C:\windows\winsxs, and then press ENTER.

  g. type ren pending.xml pending.old, and then press ENTER.

  h. system cannot find the specified files

  i. type regedit and press ENTER.

  j. select HKEY_LOCAL_MACHINE.

  k. on the file menu, click on load the hive.

  l. find the following folder:
  C:\windows\system32\config\components

  Mr. When you are prompted for a name, type Offline_Components.

  n. in the registry editor, locate and delete the following registry subkey:

  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HLKM\Components\AdvancedInstallersNeedResolving
  HKLM\Components\PendingXmlIdentifier
  HKLM\Offline Components\PendingXmlIdentifier

  o. quit the registry editor, type exit at the command prompt, and press ENTER.

  p., click on restart.

  
  Note: the steps mentioned below include editing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Please return to the State of the question.

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.