nxSystemOpen returns without interfaces or devices up to what MAX is started and chassis reset
I'm writing an XNET application. My problem is that I can't detect or connect devices or interfaces until I throw MAX and reset the cDAQ (NI 9191) chassis that contains the module CAN (NI 9862) on hardware powered. Once I do this, the application works. I can unload MAX and the software will continue to work until I cycle power on the chassis. Examples of programs behave the same way. What can I do by program for my users do not have to launch MAX first?
You can use the API of Configuraiton of NOR-system to detect cDAQ/XNET devices and then configure them to use programmatically. Most of the things you can do in MAX can be done programmatically through the API of Configuration of the system. It includes even some examples in specific material input and output-> System Configuration even if they aren't XNET.
Tags: NI Products
Similar Questions
-
The Apple Mobile Device Service service on Local computer started and then stopped.
My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)If your iOS device does not appear in iTunes, try the following:
- Open Control Panel > Device Manager
- Plug in your device
- Locate Bus USB Controllers > Apple Mobile Device USB Driver.
It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB. - Right-click and select software update of the driver...
- Click Browse my computer for driver software
- Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers - Click on let me pick from a list of drivers for devices on my computer
- Click on Apple Mobile Device USB Driver
- Click Next, then close and exit the Device Manager
To step 3 above, open the Device Manager. Expand one of the articles that are listed.
- USB Bus controllers
- Imaging devices
- Portable devices
- Other devices
Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.
Or try If iTunes does not your iPad, iPhone or iPod - Apple Support
If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.
Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.
TT2
-
How to specify "device = true/false" what URL's path and querystring
e.g. http://myserver.com/path/my.php?id=xxxxxx&name=xxxxxxxI have been read many examples on the addition of "device = true/false" or "interface = wifi" based in the current connection service. But all these examples assume that doesn't URL {t have path or from a query string:}
for example http://myserver.com;device=true
I need access to a server where the resources are way and I set up via QueryString
for example http://myserver.com/path/my.php?id=xxxxxx&name=xxxxxxx
I've been adds "device = true" at the end of the URL and at the end of the hostname
for example http://myserver.com/path/my.php?id=xxxxxx&name=xxxxxxx;device=true
for example http://myserver.com;device=true/path/my.php?id=xxxxxx&name=xxxxxxx
and none of these works. Is it possible to specify when the URL path and use querystring
I'm working with JDE Plugin 4.5, Ecliipse 3.4 for Curve 8310 and 9000 "BOLD"
Thank you
f
You always add the connection at the end of the full URL string, regardless of what contains the URL.
The connection string is stripped by the treatment of Blackberry so that your host be confused by it. The connectin string is used by the BlackBerry to determine what BlackBerry connection path will be used for the connection.
BTW, this is '; '. deviceside = true/false", not"peripheral", which could explain part of your problem.
I think this article explains all the possible connection strings:
What - in different ways to establish an HTTP connection or socket
Article number: DB-00396
For more information, I recommend the section required reading of this thread:
-
Hi all
I wanted to create a test oracle RAC environment. I would ask that if it is possible to create a CAR without using SAN device.if yes what are the other options for this. Thanks in advance.Tan wrote:
Thank youone thing more, please, can I use nfs server for storing shared with CARS so don't not using vmware.
Hello
Yes NFS is one of the certified shared storage to run CARS
See you soon
-
Teredo Tunneling Pseudo-Interface - This device cannot start. (Code 10)
Original title: code10microsoft toledo tunnelling
We think we've found a driver but we are not sure because he vomits again code.10
Hello
1. don't you make changes to your computer before this problem started?
2. What is the brand and model number?
If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message: this device cannot start. (Code 10)
You can try the following steps and check if that helps you solve the problem.
Method 1:
Open the Device Manager and the analysis of new hardware and select 'Show hidden devices' in the view menu and check if you find errors.
a. Open command prompt with administrator credentials (type CMD and right - click Run as administrator).
b. Type "netsh" and ENTER.
c. Type "int teredo" and ENTER
d. type 'set disabled state' and ENTER.
e. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".
f. Open command with administrator credentials prompt once more.
g. type netsh + ENTER.
h. Type "int ipv6" + ENTRY
i. type 'set teredo client' + ENTRY
j open the Device Manager and the analysis of new hardware.
k. Select 'Show hidden devices' in the view menu. You will see now that she is present without errors.
Method 2:
If the steps above do not help, you can try to uninstall the drivers of the computer network and reinstall and check if that helps. Before uninstalling the network drivers, make sure that you download the latest drivers on the site of computer manufacturers. Follow the steps below to uninstall the network adapter.
Follow the steps below to uninstall and reinstall the network card.
a. click on start
b. in the type of search box of start of "devmgmt.msc" and press enter
(c) in Device Manager, expand network adapters
d. right-click on the network adapter and uninstall.
e. restart the computer, and then reinstall the network card.
Note: When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.
I hope this helps.
-
I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help
1. did you remove Bootcamp using disk utility?
2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.
-
Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Code 31 for others and for the PCI device is code 28.
Hi Amit,
Thanks for the reply.Step 1: Check out the link: http://www.microsoft.com/en-us/download/details.aspx?id=8957
Step 2: See the articles for the problems of driver on the computer:
Update drivers:
Updated a hardware driver that is not working properly
Automatically get recommended drivers and updates for your hardware
Note: The article applies to Windows Vista too
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Step 3: Run the hardware troubleshooter
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
To solve the problems of slow computer performance:
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss
How to make a computer faster: 6 ways to speed up your PC
http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=97QYdW2XfTc
Ways to improve your computer's performance
http://Windows.Microsoft.com/en-CA/Windows7/ways-to-improve-your-computers-performance
Slow PC? Optimize your computer for peak performance
http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=HVhJmdoAiKy
Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Please let us know the result. If the problem is still not fixed, we will be happy to help you further.
-
That means without interface table?
Why we should not change the value in the table?
someone explain to me for example.
Thank a tonPlease visit http://prasanthapps.blogspot.com/2011/04/about-interfaces.html
brief explanation at the top
>
First the source application data are loaded into a database table (called Interface table).
Then the logic of the program provided valid validation records if they are correct or not.
If the validation fails, the errors are transferred to another table (called error Table).
If the validation is successful, the correct records are transferred through a process in the application of the destination table. -
I turned off my phone and I can't return without an itunes but I don't have a computer with itunes
I have my phone disbled and unable to return in. I don't have a computer with itunes and I have access to all the computers can not get iTunes. What should I do?
Take it to an Apple Store.
-
Downloaded both Freeletics seven minutes workout on my iPhone 6s and they work very well on this device. I also have an iWatch and these two
Apps for refuse to open on the iWatch. I tried not paring both devices several times, remove the applications on the iPhone 6 s and re - install and without success.
My partner has an iPhone 6 and an iWatch also and had no problems and everything works fine. Is there a problem with the compatibility between these two apps and the iPhone 6s or the iWatch? very frustrating
Hello
If you have not already done so, it can help to upgrade your Apple Watch to the latest version of the software (in addition to your iPhone, which seems to be up-to-date).
-
What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.
It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund if you can.
Find my iPhone Activation Lock
Check in the future first before you buy second hand: How to check for Activation lock before buying a second hand iPhone.
Find my iPhone Activation Lock
Find my iPhone Activation Lock - remove a device from the account of the previous owner
-
I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.
Hello
Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
1st in the boot order (remember to put it at the time where the fact).Then put in a DVD to boot Windows and see if the driver works.
If it doesn't then it's a hardware problem.
=======================================
If the drive has worked in the test above, that these can help:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
MTP USB device driver failed to install - Galaxy S4 and LG G3 phones.
Original title: ver7 device driver instalation windows error when you try to connect smart phones mini Galaxy S4 and LG G3? Any help please
I updated my system several times and its updates automatic out but I can't post of ASRock ion 330 in interface with my smart phones. My windiws has a rateing of 3.4 access experience. For the mini Galaxy S4, I downloaded Kies\3 and original Kies both refuse to go beyond the connection at your stage deviece of the program before left im watching a dog spinning graphic and nothing happens and im left the peripheral USB MTP dryer failefk message to install. I get the same message for my LG G3 too and ive no special software for this deviece istalled. If someone has a way to work around this problem, I would be forever in dept here otherwise I will be cursed to tear my phone to transfer all the data on my hard drive laptop forever through a box of chip transfer of data via the USB port. Thank you.
Hello Dean,
I understand the inconvenience caused to you. I will certainly help you in this matter.
As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.
Let me ask you;
- This already worked for you on this machine?
- You did any hardware/software changes to your computer before the show?
Before you continue troubleshooting, please disconnect all external devices (printers, scanner, USB (Universal Serial Bus) drives, etc.) except the keyboard and mouse and then start.
Follow the steps below and check.
Method 1: Run the hardware and devices troubleshooter.
The hardware and devices Troubleshooter is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.
Open the hardware and devices Troubleshooter
If the problem persists, follow method 2.
Method 2: Uninstall and reinstall all USB controllers.
To remove and reinstall all USB controllers, follow these steps:
- Click Start, click run, type sysdm.cpl in the Open box, and then click OK.
- Click the hardware tab.
- Click the Device Manager button.
- Expand Bus USB controllers.
- Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
- Restart the computer and reinstall the USB controllers.
- Plug in the removable USB storage device and test to make sure that the problem is solved.
Method 3:
Check this resolution provided by stolagt on April 26, 2014.
Let us know if you need more assistance. We will be happy to help you.
____________________
Thank you best regards &,.
Isha Soni
-
of Ethernet interface input queue size/81/80 (max)
Hello
Anyone have the problem that the C1140 - K9W7 (or C1135) Gigabit interface
sometimes "blockages" due to problems of queue (from what I understood it was the problems of queue)?
I got this AP, C1140-K9W7 with IOS 12.4 (21a) JA1 and noticed that it did not
any entry of packets to the interface, Gigabit, County of drop 0 but strangely the entrance queue
information was that he had size 81 and 80 max... seems to me that the treatment of the queue
code hanging somewhere...
The output interface is OK however (the AP sends arp requests..).
I did some research but could not find any information on this subject, also followed the
steps to try to resolve what was causing this, without success [1]. The rating of IP traffic
shows that the interface receives packets, but they are not under treatment and "not".
droped too (at least the number of drop is 0).
If I reboot the AP it works OK Yes... I can still access the console (via serial) and it
in the case where there is no suggestion of procedure, is still in this State.
Thanks for your time.
John Mousinho
[1] http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094791.shtml
Looks like this might be related:
CSCtf27580 Ethernet interface queue entry corner of traffic broadcasting/uniGRE
Y at - it no traffic WILL through this access point?
The workarounds are:
Reboot APs to bring APs back up for time being.
OR
go back to 6.0.188.0 code on WLC.
OR
Route GRE traffic away from AP's.It appears that it definitely exists in your code:
12.4(21a)JHA 12.4(21a)JA01 006.000(196.000)
-
the background behind my pages turned black, how to return to grey? I spent between purge normal, preview, Slug and presentation and closed and open in design and it is always black. I can't imagine layouts with black background please help!
or maybe that the interface has been defined on Dark?
Go to Preferences > Interface tab, choose light color theme dropdown on Apearance section (the upper part of the window)
Maybe you are looking for
-
Adwere on computer - bestonlinebounty
I played one game offline when the thing pops up. I have had no web browsers open at the time. When she appeared it forced the game to reduce to a minimum. This is the first time I saw it. I used the taskbar to close, making sure not not to click
-
Update... 0x8024400a error code
will not be update(turned on). Don't let me. A recent accident and had to reload xp
-
Hello New to the Acer forum so Hello everyone. I upgraded my old laptop to a VN7 - 791 G that came with a 60 GB SSD and 1 TB of"relief". In view of the OS is installed on the SSD with the recovery partition I guess and size growing bone, I'm afraid i
-
Help again...
I never could get the cameras to work wireless, and I just now had time to run the cat5e cable in walls. I plugged the cameras directly to the router (wrt600n) and made sure the cameras worked. Everything is good - set a static ip address. Everything
-
Crash of garbage collection problem!
Hello everyone. I am doing multithreaded in my application. In my new thread, I use two signals and two locations. Task of 1 signal & slot- Given a parameter object in the signal I invoke a member function of that class in the slot. Task of 2nd signa