Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Help, please

Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Code 31 for others and for the PCI device is code 28.

Advertisement

Hi Amit,

Thanks for the reply.

Step 1: Check out the link: http://www.microsoft.com/en-us/download/details.aspx?id=8957

Step 2: See the articles for the problems of driver on the computer:

Update drivers:

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

Automatically get recommended drivers and updates for your hardware

http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

Note: The article applies to Windows Vista too

Tips for solving common driver problems

http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

Step 3: Run the hardware troubleshooter

Open the hardware and devices Troubleshooter

http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

To solve the problems of slow computer performance:

Optimize Windows 7 for better performance

http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss

How to make a computer faster: 6 ways to speed up your PC

http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=97QYdW2XfTc

Ways to improve your computer's performance

http://Windows.Microsoft.com/en-CA/Windows7/ways-to-improve-your-computers-performance

Slow PC? Optimize your computer for peak performance

http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=HVhJmdoAiKy

Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

Please let us know the result. If the problem is still not fixed, we will be happy to help you further.

Tags: Windows

Similar Questions

  • MS ISATAP Adapter display, MS ISATAP ADAPT #2 and TEREDO TUNNELING PSEUDO-INTERFACE with exclamation points in Device Manager windows 7

    I don't feel any ill effect of this observation, but this error is new and I would like to know what it generates. Properties for each a watch that he will not start error 10... For now I have disabled all three without any problem so far. I am using Windows 7 32 bit... Thank you.

    Hello

    Thank you for the update on the issue.

    If your computer works fine after disabling the devices that is not recommended by Microsoft, I suggest you try these steps and see if it works for you.

    Step 1:

    Uninstall the device from Device Manager

    • Open the Device Manager
    • Expand the Device section.
    • Find the driver.
    • Click right on the driver and choose Uninstall.
    • Select the check box delete the driver for this device.
    • Restart the computer after the uninstall is complete.

    Step 2:

    Uninstall the drivers of device from the list of programs in the control panel

    • Click Start, select Control Panel
    • Now, click on programs and select programs and features.
    • Find the device driver.
    • Right-click device driver and select Uninstall.
    • Restart the computer after the uninstall is complete.

    Step 3:

    Download and install the latest drivers for the device on the manufacturer's Web site

    Hope that the information provided is useful. Let us know the status of your issue and we will be happy to help you if necessary.

    Kind regards.

  • Teredo Tunneling Pseudo-Interface - This device cannot start. (Code 10)

    Original title: code10microsoft toledo tunnelling

    We think we've found a driver but we are not sure because he vomits again code.10

    Hello

    1. don't you make changes to your computer before this problem started?

    2. What is the brand and model number?

    If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message: this device cannot start. (Code 10)

    You can try the following steps and check if that helps you solve the problem.

    Method 1:

    Open the Device Manager and the analysis of new hardware and select 'Show hidden devices' in the view menu and check if you find errors.

    a. Open command prompt with administrator credentials (type CMD and right - click Run as administrator).

    b. Type "netsh" and ENTER.

    c. Type "int teredo" and ENTER

    d. type 'set disabled state' and ENTER.

    e. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".

    f. Open command with administrator credentials prompt once more.

    g. type netsh + ENTER.

    h. Type "int ipv6" + ENTRY

    i. type 'set teredo client' + ENTRY

    j open the Device Manager and the analysis of new hardware.

    k. Select 'Show hidden devices' in the view menu. You will see now that she is present without errors.

    Method 2:

    If the steps above do not help, you can try to uninstall the drivers of the computer network and reinstall and check if that helps. Before uninstalling the network drivers, make sure that you download the latest drivers on the site of computer manufacturers. Follow the steps below to uninstall the network adapter.

    Follow the steps below to uninstall and reinstall the network card.

    a. click on start

    b. in the type of search box of start of "devmgmt.msc" and press enter

    (c) in Device Manager, expand network adapters

    d. right-click on the network adapter and uninstall.

    e. restart the computer, and then reinstall the network card.

    Note: When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

    I hope this helps.

  • YOU NEED TO INSTALL TEREDO TUNNELING PSEUDO INTERFACE DRIVER, WHERE CAN I GET THE DOWNLOAD?

    YOU NEED TO INSTALL A TUNNELING PSEUDO INTERFACE DRIVER TOREDO. HOW CAN I GET A? I HAVE A HP2000 LAPTOP, AND I KEEP GETTING WARNINGS IT DOES NOT, AS WIFI DEVICES HAVV YELLOW YIELD SIGN WITH (!) IN THEM. I'M LOST, JOE - HE IS AWINDOWS 8 X 64

    Hello

    Please, do not type in uppercase.  It is difficult to read and is considered rude/scream.  Thank you.

    Follow the solutions listed here

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925

  • Could not load the driver for Teredo Tunneling Pseudo-Interface

    Hello

    Does anyone know how to fix this problem (Vista) Business

    Product
    Teredo Tunneling Pseudo-Interface

    Problem
    Could not load driver software

    Description
    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

    Signature of the problem
    Problem event name: PnPDeviceProblemCode
    Architecture: x 86
    Hardware ID: * TUNMP
    Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
    The PnP problem code: 0000000-a
    Driver name: tunmp.sys
    Driver version: 6.0.6000.16386
    Driver date: 02/11/2006
    OS version: 6.0.6000.2.0.0.256.6
    Locale ID: 2057

    Additional information about the problem
    Bucket ID: 12121968

    Concerning
    Dave

    Hi Dave

    Can you please give us more information on your laptop and what is happening exactly?

  • Somehow E changed Teredo Tunneling Pseudo Interface Microsoft Tun Miniport map2, how to change it back please?

    Hi all, I tried to figure out why I got with the Teredo Tunneling Pseudo Interface 10 exclamation point error code and the error code 2 adapter 6to4 31, tried to update driver and somehow changed Teredo to Tun Miniport, can someone help me change to Teredo please?  32-bit Pavilion HP running Vista.

    Is something that does not? These errors can usually be ignored.

    http://support.Microsoft.com/kb/932520/en-us

  • How can I fix adapter Teredo Tunneling Pseudo-Interface of network problem that shows an indication of a problem in the Device Manager?

    I've never seen this problem before.  The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface.  The driver update does not work, and apparently the last and the best driver is already installed for this device.  I tried to disable and searching for the hardware changes.  Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point.  It is said that the device cannot start.  I rebooted the machine to see if something has changed.  There can be no.
    I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category.  I ran diagnostic system provided by HP software, but nothing seems to be defective.

    Hello

     
     
    1. What is the code that you see under the status of the device and the exact error message?
    2 have you made changes on the computer before this problem?
    As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.
    Step 1: first of all, I would say you temporarily disable any security software and then try to install.
    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
    Step 2: Now try to install the drivers
    a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    b. identify the sound card, right-click on it and select Properties .
    c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
    Restart the computer and install the latest driver.
  • [SOLVED] Error 404 Google + card Tunnel Teredo Tunneling Pseudo-Interface disabled in NetBIOS over TCP/IP

    I realize that it is a long title.  It could be useful describe my problem.

    Recently, I downloaded something (not sure if I can't talk about website) and with download received 4 bad files found by Malwarebytes named: PUP. OfferBundle and PUP. ToolbarDownload.  These 4 files were quarantined and then removed, but this does not solve my problem.  I ran Microsoft and other spyware, but nothing more has been discovered.

    I have Norton Internet Security, which extends constantly and I always have these terrible files.

    I can not access Google search engine.  I get this message: error 404 (not FOUND)! 1

    The address bar reads: cgi-bin/redirect.ha.  I have another computer and am able to access Google since the router same use so I know there are still a few malware rootkit on my computer which may be connected to the Teredo Tunneling adapter, I don't understand.

    I'm not sure how to solve this problem.  I don't know where watch, but ran many scans of data collection.  Here is a part of a single test showing wireless and LAN configurations:

    Windows IP configuration

    Name of the host...: StrikingEagle-HP

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    ... DNS suffix search list: att.net

    Wireless Network Connection 2 wireless LAN adapter:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft Virtual WiFi Miniport adapt

    Physical address.... : 20-10-7A-1C-AF-7D

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. : att.net

    Description...: Realtek RTL8188CE 802.11b/g/n WiFi adapt

    Physical address.... : 20-10-7A-1C-AF-7D

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    IPv6 address: 2602:306:cdb8:5300:b5fc:b411:6df0:e722 (Preferred)

    Temporary IPv6 address...: 2602:306:cdb8:5300:b9d4:2772:d89a:3a5f (Preferred)

    Address IPv6 local link...: fe80::b5fc:b411:6df0:e722% 13 (Preferred)

    IPv4 address...: 192.168.1.73 (Preferred)

    ... Subnet mask: 255.255.255.0.

    Lease obtained...: Sunday, April 22, 2012 23:29:35

    End of the lease...: Monday, April 23, 2012 23:29:34

    ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 13

    192.168.1.254

    DHCP server...: 192.168.1.254

    DHCPv6 IOOKING...: 320868474

    DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

    DNS servers...: 192.168.1.254

    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. : att.net

    Description...: Realtek PCIe GBE Family Controller

    Physical address.... : 2C-41-38-5C-76-B6

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    IPv6 address: 2602:306:cdb8:5300:584d:2ddf:6 a 08: f6a7 (Preferred)

    Temporary IPv6 address...: 2602:306:cdb8:5300:575:56e9:298d:9097 (Preferred)

    Address IPv6 local link...: fe80::584d:2ddf:6 a 08: f6a7% 11 (Preferred)

    IPv4 address: 192.168.1.71 (Preferred)

    ... Subnet mask: 255.255.255.0.

    Lease obtained...: Sunday, April 22, 2012 23:29:32

    End of the lease...: Monday, April 23, 2012 23:29:32

    ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 11

    192.168.1.254

    DHCP server...: 192.168.1.254

    DHCPv6 IOOKING...: 237781304

    DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

    DNS servers...: 192.168.1.254

    NetBIOS over TCP/IP...: enabled

    Tunnel adapter isatap. {38655146-6231-4777-AB1C-2DC12E0017FD}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft ISATAP adapter

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 9:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft 6to4 card

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter ISATAP.att.NET:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. : att.net

    ... Description: Adapter Microsoft ISATAP #2

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Teredo Tunneling Pseudo-Interface:

    The connection-specific DNS suffix. :

    ... Description: Teredo Tunneling Pseudo-Interface

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    IPv6 address: 2001:0:4137:9e76:2413:2ee1:3f57:feb8 (Preferred)

    Address IPv6 local link...: fe80::2413:2ee1:3f57:feb8% 14 (Preferred)

    ... Default gateway. :

    NetBIOS over TCP/IP...: disabled

    Server: dsldevice.att.net

    Address: 192.168.1.254

    Name: google.com

    Address: 74.125.227.40

    74.125.227.41

    74.125.227.46

    74.125.227.32

    74.125.227.33

    74.125.227.34

    74.125.227.35

    74.125.227.36

    74.125.227.37

    74.125.227.38

    74.125.227.39

    Please note the last entry.  DHCP is not enabled.  NetBIOS over TCP/IP is disabled.  Now, it's for the Tunnel Teredo Tunneling Pseudo-Interface AND Google map is registered immediately thereafter with a list of IP addresses.

    Would be - why I can't access Google?  How can I fix it?  How can I activate this card Tunnel?  I want to do this?  I did a ping for the Tunnel of the card test and it seemed to work OK.  How do I know if card Tunnel is really on?   Why is the Tcpip BIOS

    people with disabilities in the last list of IP and not on others?  Why are all those Google IP addresses listed?

    Any help is greatly appreciated.  I'm very stuck.  Thank you.

    Edit = Edit

    has run another scan: MicrosoftSecurity Agent (I think) that produced a VERY long report, CBS.  There are a lot of mistakes in this report, and I don't know which ones were repaired my Microsoft or if errors are related to my problem.  Here are some of the errors.  All t errors are repeated throughout the report. I hope this info is helpful:

    2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

    2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

    2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

    0 X 80070057 - E_INVALIDARG]

    2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

    2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

    2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

    0 X 80070057 - E_INVALIDARG]

    2012-04-11 07:29:07, CBS Session info: 30218206_2956451109 initialized by the WindowsUpdateAgent client.

    2012-04-11 07:29:07, info CBS doesn't have the package opened internally. [HRESULT = 0X800F0805 - CBS_E_INVALID_PACKAGE]

    2012-04-11 11:20:30, CBS M² info: could not start the download with pattern file: C:\Windows\servicing\sqm\*_std.sqm, flags: 0 x 2 [HRESULT = 0 x E_FAIL 80004005]

    Hello
     
     
    We are pleased to know that the problem is solved.
    We know in the future if you have problems with Microsoft Windows.
  • TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP

    My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

    Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

    As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

    I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

    This left me confused.  If there is a problem with this device, no solution seems to exist.

    Any help that will allow my laptop to function normally is welcome.

    I understand that you want to know if the teredo adapter can cause performance problems.

    The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

    This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

    If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

    Furthermore, does this happen that the adapter is connected or not?

  • Teredo Tunneling Pseudo-Interface

    In my view, that it is a Trojan horse virus. I updated my computer security, Microsoft Security Essentials both Trend Micro Internet security. None of them was able to remove this from my system cards. I even had to put a wireless adapter on my computer because when I tried to connect for updates when you use an Ethernet cable, it could block the updates. anyone with this problem let me know how you got rid of him. Thanks, Ron

    Hello RonBowen,

    Thanks for your post.  It is not a virus, it is also a part of the Windows operating system.  I understood as well a link that contains information to repair the adapter and a link to turn it off if you want.  Please see:

    How to repair Teredo Tunneling pseudo-interface 6to4 adapt

    How to disable Teredo Tunneling pseudo-interface 6to4 adapt

    I hope this helps.

    See you soon

  • My Teredo Tunneling pseudo-interface iis does not

    Teredo Tunneling pseudo-interface is not working. It displays an error Code (10). How to solve this problem?

    Cultural12

    You have Zone Alarm installed?

    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.
    To re - install
    1. Click on start.
    2. Type Device Manager in the start search box, and then open it.
    3. Click the Action tab on top and click Add legacy hardware
      then click next and next again, he will then scan and find nothing then click on the screen after that.
      Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
      To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
  • Download driver driver Teredo Tunneling Pseudo-Interface

    How to download the Teredo Tunneling Pseudo-Interface driver?

    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.

    To re - install
    Click Start.
    Type device manager in the start search box, and then open it.
    Click the Action tab on top and click Add legacy hardware
    then click next and next again, he will then scan and find nothing then click on the screen after that.
    Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
    To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
    If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.

  • How to install Teredo Tunneling Pseudo-Interface

    Dummy me... In Device Manager, I uninstalled the Teredo Tunneling pseudo-interface. I need to know how to reinstall this interface. I've seen the other reviews on the web on how to set it up, but all those who assume that the interface is still visible in Device Manager.

    So where can I find the procedure to install this?

    I'm on Windows 7 Professional x 64.

    Thank you

    You have enabled the option - Show hidden devices ?

    Device Manager > view > CHECK show hidden devices.

    Expand the network adapters

    Microsoft Teredo Tunneling adapter is it listed?

    See you soon! "That's all a pension chequer nights and days,"
    Where destiny with men for pieces plays;
    Here and there, mates and kills.

    In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

  • Error message: Teredo Tunneling Pseudo-Interface driver must reinstall

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Original title: Error Message: Teredo Tunneling Pseudo-Interface driver must reinstall .__Not able to find this driver on the Microsoft Web site.

    Hi Tony,.

    ·        When and where exactly you see the error message?

    ·        You did changes to the computer before this problem started?

    You can follow the steps below and try to reinstall the drivers and see if it helps.

    a. Click Start.

    (b) in the search box type Start devmgmt.msc and press to enter.

    c. in the Device Manager, click the action tab, and then click Add legacy hardware.

    d. click next then select install manually in a list, then click Next. In the list select the network adapters.

    e. once everything loaded in the manufacturer column, select Microsoft, and then scroll all the way down in the column for network adapter.

    f. Select turedo tunneling adpter in the list, and then next to the installation.

    Following the steps above should help you to install the drivers.

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem with the HP 430 (bluetooth and teredo tunneling Pseudo-Interface) drivers

    Hello

    recently my bluetooth function cannot to connect to other devices... This is what happens to the Device Manager:

    What is teredo tunneling pseudo-interface is for? is it important?
    If so, how to solve this problem?
    How to solve the problem of the bluetooth?

    Generic Bluetooth adapter:
    USB\VID_03F0 & PID_311D & REV_0001
    USB\VID_03F0 & PID_311D

    Teredo tunneling pseudo-Interface:

    * TEREDO

    Go to Device Manager, right click on the device and select Update driver. Path to the .inf file that you downloaded for use.

Maybe you are looking for

  • After updated recent windows 10 keyboard not work properly in Firefox [and also Chrome but well on board].

    Key press a single key seed to type QWERTY in sequence on each press. The virtual keyboard works very well. The keyboard has no problem in other programs [except Chrome] Upgrade Windows 10 was last week and everything was fine until today when the Tu

  • LaserJet P1102w: Laserjet P1102w access to the wifi configuration

    I just replaced my router and need to set the laserjet to access.  I have not been able to find my way to Setup wifi and have probably made a mess of it.  I removed my printer from the printers and devices.  Still, there is a print job that is stuck

  • How can I cancel

    I have zune to a few recent xbox live monthsfor, but now I feel like im not much use, but pay each month... Can't find a way to cancel the subscription... HELP, financial issues...

  • Windows live id sign-in last update does not install

    update windows live id sign in assistant will not install what it seams it can't locate wllogin.msi, ask for disc or etc. or the location of the file Help, please Journal (14:03:18) MSI properties: REBOOT = "ReallySuppress"(14:10:43) MsgType:16777216

  • How to install applications on windows 8

    If you are wanting to know how to insatll applications (APPS) on your screen here is a video that will help you. Here is the link to the video that NewVideoSource posted. By clicking on the White Star congratulations on the left is a way of saying th