OAM 11 g access Tester works with 11g WebGates?

Similar Questions

• questions: what I have to have internet access to work with the ambient light and photoshop or is the program downloaded on my computer while I did not need to be online?

  I live in a rural area that does not have consistent internet access.  questions: what I have to have internet access to work with the ambient light and photoshop or is the program downloaded on my computer while I did not need to be online?

  That is, the work programme is located in my computer or is it online?

  Thank you.

  adobe (and perpetual license) subscription programs are installed on your computer.  You need to be online for installation and activation, and then you must be online periodically thereafter.

  with a monthly subscription, one time every 30 days is necessary to maintain your activation.  for an annual subscription, all 91 days once is enough.  These checks online to check your license status.

• Solaris 10 compatibility with 11g Webgates

  We have a customer using Solaris 10, Apache 2.2.13, and we need to install webgates to protect their resources. We use the OAM 11 g (11.1.1.5). We have done in the past, but the matrix certification indicates that only 10g webgates are able to be used with this combination.
  
  Is this still true or are we able to use 11g webgates with this combination?
  
  In a few months, we have will be upgrading to 11.1.1.6... are we going (notice I did not ask if we) have to say about our customer to go to the OHS 11 g instead of Apache?
  
  Any help would be appreciated... and if we can get documentation that directs us precisely on this point-, so we can instill in our customer the need to spend to OHS Apache would be too great!

  OldGuy wrote:
  We have a customer using Solaris 10, Apache 2.2.13, and we need to install webgates to protect their resources. We use the OAM 11 g (11.1.1.5). We have done in the past, but the matrix certification indicates that only 10g webgates are able to be used with this combination.

  It is correct and still the case.

  In a few months, we have will be upgrading to 11.1.1.6... are we going (notice I did not ask if we) have to say about our customer to go to the OHS 11 g instead of Apache?

  There is no 11.1.1.6 for OAM, the next update will go to 11.1.2 and WebGate support remains the same, but Sun OpenSSO agent will build as well.

• I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

  I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

  Check the liquid Indcator of Contact.

  Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

  Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

• I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

  I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

  Well, if you need older versions of firefox you can find them on this site:
  - http://www.oldapps.com/firefox.php

  Best regards, G-Cloud.

• Portege R500 - TrueSuite Access manager does not work with IE 8

  TrueSuite Access Manager does not work with Internet Explorer 8

  Version:
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager 2.1.23.0

  Any idea?

  Thankx
  Robert

  Hello!

  Which laptop computer and operating system you have?
  And what do you mean with it doesn t work? You get an error message or something else?

  You must give us a little more information. Otherwise, we can t help you my friend.

  Good bye

• My Epson printer has stopped working with Firefox today. It test pages works on laptop and works with IE. Until today, he has worked with Firefox. Why can I not print anything from the internet with Firefox?

  Until today, I did everything with Firefox. Then I was on Paypal and went to print a shipping label and the printer will not work. I went to troubleshoot page and printed a test page. I uninstalled my printer and then re-installed. Still would not work from a Web page. I did a system restore. Still did not work. Called Epson. They say that it is a problem of Firefox because it works on the pages of specifications and testing. I installed IE and the printer works. What happened and how can I return to work with Firefox?

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_pr...

• Manager fingerprint access Truesuite do not work with IE8 and Firefox 3.0

  Hello:

  I installed the latest version 2.5.29.0 and does not work with firefox 3.0. If someone has tested with IE8?

  Thank you.

  Post edited by: pedroae

  The old Truesuite doesn t supports or is not compatible with the new IE and Firefox browsers. Wait for a update!
  I read somewhere that the Truesuite 3.0 or higher version would support IE8 and Firefox 3

• Test Panel does not work with the PXI-6541/6542/6551 in PXI-1002

  Ripping my hair out trying to get the Test Panel can work with system as described below:

  1002-PXI chassis with controller PXI-8176.  In the three places available (from left to right) PXI-6551, PXI-6542 and PXI-6541.  They come in NIMAX, they self test, reset and to calibrate.  But when I try to open a Test Panel, I get an error as follows:

  nidmfpan.exe - Application error

  The application failed to initialize properly (0xc0000142). Click OK to close the application.

  I uninstalled, re-installed, modified and repaired everything NIDAQMX (15.0.1) 15.0 HSDIO, NI-VISA (15.0.1), etc.

  Original symptom is that when I pressed the button on the test Panel, nothing would happen.  Then, the next symptom is that MAX has said MFC90.dll (not found) and MSVCP90.dll (not found) and MSVCR90. DLL (not found).

  I can not find help topics or the forum messages that cover this.  Very annoying.

  Hi fully,

  Sorry to hear that!  Nidmfpan.exe is the process that opens MAX test panels and MFC90.dll is a Windows wrapper.  Combinations of driver reinstall or copy other MFC90.dll files in System32 are unlikely to solve the problem.

  You are on XP?  Try to navigate to C:\Windows\System32 and rename the nidmfpan.exe.manifest to nidmfpan.exe.manifest.back and after close/reopen MAX file and try to open a test Panel.  Is it effective?

  Note that the file you want to rename is nidmfpan.exe.manifest and NOT nidmfpan.exe.

  If not immediately successful, close and reopen the MAX and try the test panels a few times more.  If after several attempts it still does not work and the correct manifest file has been changed, it can point to a deeper problem of Windows that requires a reformatting of the OS.

  Really that's hope!

  P.S. you might get more visibility to a problem as it is in the sections "PXI" or "Digital i/o.  VXI and VME are not widely used these days, so this section of the forums is probably not too much traffic.

• Cannot access files on hard disk on windows xp, after I worked with it on win 7.

  Cannot access files on external hard drive on windows xp, after that I worked with him on Victory 7.I can see the file, but he says "is not accessible. access is denied. " Can someone help me?

  As you can guess, this is a permissions problem.  Here, it makes a difference if you have XP Home or Pro you have to safe boot mode to change permissions in the House.

  My crystal ball says that your external drive is formatted with the NTFS file system.  When you connected to Windows 7 (or any other computer besides), the files have been added that this user permissions apparently understood that only Win 7 has access to.  There are several ways to handle this...

  Is to save on all your files and reformat the external hard drive with a FAT32 file system and then support files.  You will have no problems of permissions with FAT32, but you can't have any higher than 4 GB single file either.

  Another way is as an administrator, to 'Ownership' of all the files on the disk
  "How appropriate a file or a folder in Windows XP"
     <>http://support.Microsoft.com/kb/308421 >
  but this could get old if the drive moves back.

  Yet another approach is to give "Everyone" full access to everything on the drive.  This may or may not protect against new folders or files added, but may be worth a try:
  As a user administrator, open a command window:
  Start-> Run-> "cmd".
  Then, enter the command:
  CACLS E:\/t/e/c/g everyone: F
  (where I am assuming that your external drive is mounted as "E:" - change of real player)

  I hope that something more top is useful...
  JW

• Intel WiDi Pro works with Microsoft Direct access?

  Our company deploys a Direct access to avoid using VPN tokens, so the use of laptop with Windows 7 without DA WiDi society construction works without any problems, but when you add DA at this laptop it stops work WiDi. He will see the WiDi adaptor and even ask the PIN code, but once to enter the CONFIDENTIAL code to connect to the screen, it will lose the connection, and then I also have to reset the WiDi dongle (we currently use the dongle Microsoft WiDi)

  For all help and advice on how to the GET WiDi work with the DA would be appreciated

  Thank you

  Wayne

  Hi Wayne,

  Thanks for posting your query on the Microsoft Community.

  That you are connected to a domain network, I suggest you re-post your query on The TechNet Forums as we have experts working on this type of questions and for you to help.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• InDesign test obsolete unable to access the work unable to buy as said buy unavailable

  Hello

  I started working on trial design in the hope of buying it when it expired and continue my work. However, to my horror when I try to buy it, it says not available for purchase in Sri Lanka as I am currently in Sri lanka, although I live in Sydney. Only after the expiry of the test I found that InDesign is not available for purchase in Sri Lanka. I tried for more than a week. I can't access the work that I did and now my deadline is near, I need to present the report. Within this week, can help you pls by extending at least from the trial. It's not my fault if I can't buy it here.

  Help, please! Would really appreciate your help. If I can at least access my folder, it will be ok I can finish it in another application.

  Unfortunately, we can not help you in a public forum. You will need to contact Adobe support by chat or by phone. Make sure that you are connected to your identification code Adobe click on the blue link:

  Contact the customer service

• Cftransactions works with MS Access databases?

  The project I'm working on that accesses its data from a MS Access database. When you create a new person in the database there are several tables where the data is to be inserted and updated.

  I had the problem, that when the second, third... insertion fails, one is already done. Then I wanted to wrap the insertions in a cftransaction, so when a call fails the other ones get restored.

  But now no insertion takes place, even when there is no error. I have not found a reliable information it is possible to use with MS Access dbs cftransactions. Is it a definitive statement if it works with MS Access at all or it will work with what version?

  Hope you can help out me.

  I doubt that cftransaction will do you good with MS Access.  The main objective of the cftransaction tag is to use the functionality of the underlying database transactions.  In general, link operations several query statements together as an atomic unit such as if one of the statements fails, the entire transaction is rolled back and the database is left intact.  Access does not have a transaction log, so there is no way so he could process transactions (and thus to perform restorations).  If you find yourself with incremental updates that you see.

  This is another reason you will see recommendations of other ColdFusion developers DON'T use MS Access in ColdFusion applications.

  -Carl V.

• Unable to Access Manager device and receive an error message saying "MMC will not work with a version of Internet Explorer prior to version 5.5.

  Original title: control Pasnel: Device Manager

  Trying to open Device Manager in Control Panel, I get the following error message:

  "MMC will not work with a version of Internet Explorer prior to version 5.5"

  OS Vista Home Premium 32 bit SP2

  There are conflicting answers on Google

  1 virus Infection. Recommendation: complete the recovery. I ran several anti-virus and anti-malware program that pretend that my system is clean.
  2. added Version 6.0.0.0 for a registry entry will produce a fix.

  The first suggestion that I consider as a last resort, but don't want to mess with my registry without help.

  Does anyone have experience of this 'mistake' and can talk me through a patch.

  Hello

  Please keep us updated.

  Glad to know that you have addressed the issue. Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• The EOM to Oracle 11g works with clients of 9i

  If I install OEM 11 g on a Windows Server, I download emca data to a database in Oracle 9i on a SUN Server?

  Take a look at the Certification Oracle Enterprise Manager Grid Control auditor [ID 412431.1] on My Oracle Support.
  Here you will find all the combinations that have been certified (11, 10.2) WHO works with as agent, database, etc.

  Eric