Similar Questions

• Radius http authentication fails in 12.2.58 and 15.0.1 to 2960

  Hello

  Find here the extraction of the configuration and debugging sysout.

  The works of radius servers very well with all other accesss like ssh, telnet...

  Just the http access failure.

  This Setup works perfectly with the installed 12.2.55 version before.

  Any idea?

  Best regards.

  Ludovic

  AAA new-model

  AAA authentication login default local radius group

  physical space for AAA authentication login

  AAA authentication login HTTPOnly group local RADIUS

  authorization AAA console

  AAA authorization exec default local radius group

  physical space for AAA authorization exec

  AAA authorization exec HTTPOnly group local RADIUS

  IP http server

  IP 8090 http port

  23 class IP http access

  IP http authentication aaa-authentication connection HTTPOnly

  IP http authentication aaa exec-authorization HTTPOnly

  no ip http secure server

  radius of the IP source interface Vlan1

  Server RADIUS RADIUS-BLX-105

  ipv4 10.151.254.105 address auth-port 1812 acct-port 1813

  transmit 3

  button 7 xxxxxxxxxxxxxx

  !

  Server RADIUS RADIUS-BLX-106

  ipv4 10.151.254.106 address auth-port 1812 acct-port 1813

  button 7 xxxxxxxxxxxxxx

  007482: 19 Aug 10:55:15.207 THIS: auth_proxy_interested_http_packet AUTH-PROXY: config auth-proxy not found

  007483: 19 Aug 10:55:15.216 THIS: Friday, August 19, 2011 08:55:15 GMT 10.159.254.105 auth_required

  Protocol = HTTP/1.1 method = GET

  007484: 19 Aug 10:55:15.216 THIS:

  007485: 19 Aug 10:55:22.355 THIS: auth_proxy_interested_http_packet AUTH-PROXY: config auth-proxy not found

  007486: 19 Aug 10:55:22.363 THIS: the connection HTTP AAA authentication list name: HTTPOnly

  007487: 19 Aug 10:55:22.363 THIS: the connection HTTP AAA authentication list name: HTTPOnly

  007488: 19 Aug 10:55:22.363 THIS: AAA/BIND (00000A7E): link i / f

  007489: 19 Aug 10:55:22.363 THIS: HTTP: failed authentication level 15

  007490: 19 Aug 10:55:24.368 THIS: Friday, August 19, 2011 08:55:24 GMT 10.159.254.105 auth_failed

  Here is a link to a similar question:

  https://supportforums.Cisco.com/thread/2100245

  References a bug ID CSCtq94595

• OAM 10 g and 11g coexistence: form Login Cookie exceeds the maximum limit

  Hi all

  I try to configure the existence of OAM 10 g and 11g co

  I followed the doc:

  http://docs.Oracle.com/CD/E27559_01/doc.1112/e28183/co_oam.htm#BABCIFGF

  When I access a resource of 11g, he is redirected to the authentication scheme set up in OAM 10 g successfully but when I present the credentials, I get below error:

  Bad query Oracle Access Manager

  Form Login Cookie in the requested URL is greater than the maximum permitted limit.

  Pointers for the same thing?

  Thank you

  Hi idmuser,

  I don't know why you would get this message (only) in the integrated environment, but you might follow notes 1124614.1 to see if the increase of the parameter formCookieMaxLength changes the behavior (and also if you have different behaviors in different browsers). The regime applicable to this would probably be a /oam/server/obrareq.cgi protection

  Kind regards

  Colin

• How do you get the header of HTTP authentication for our hosted solution?

  How do you get the header of our hosted solution (adobeconnect_admin_httpauth) HTTP authentication? The documentation says find a custom.ini file but I have no idea how access.

  I need to provide only the plugin adobeconnect used with a Moodle instance, screnshot below.

  

  If it helps, when I click "Test connection", I see the following output.

  A series of tests were run to determine if the Adobe Connect Pro Server has been properly configured for this integration to work and also determine if the user credentials provided in the global settings activity has the appropriate permissions to perform the necessary tasks required by the activity module. If none of the tests below have failed, this activity module will not work correctly.

  To get help and documentation in how to configure your Adobe Connect Pro Server, please see the help page of MoodleDocs for this activity module help page

  Sending call common-info:

  has managed to get the session key: na11breezrirhb4f4ryf5shqy

  connected as user admin

  Test retrevial of shared content, registration, and records of the meeting:

  Error getting the shared content folder

  XML request:

  <? XML version = "1.0" encoding = "UTF-8"? > < params > < param name = 'action' > sco-shortcuts < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  getting error forced archives folder (meeting records)

  XML request:

  <? XML version = "1.0" encoding = "UTF-8"? > < params > < param name = 'action' > sco-shortcuts < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  record of meetings to get error

  XML request:

  <? XML version = "1.0" encoding = "UTF-8"? > < params > < param name = 'action' > sco-shortcuts < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  meeting testmeetingtest file creation error

  XML request:

  <? XML version = "1.0" = "UTF-8 encoding"? > < params > < param name = 'action' > sco-update < / param > < param name = ' type' > meeting < / param > < param name = "name" > testmeetingtest < / param > < param name = 'folder-id' / > < param name = "date-begin" > 2015-03-14T 06: + 00:00 53:39.000 < / param > < param name = 'date-end' > 2015-03-14 T 07: + 00:00 53:39.000 < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < = "invalid" status code > < invalid field = 'folder-id' type = subcode 'id' = 'format' / > < / status > < / results >

  Error creating user testusertest

  XML request:

  <? xml version = "1.0" = 'UTF-8' encoding? > < params > < param name = 'action' > principal-update < / param > < param name = "name" > testusertest < / param > < param name = "name" > testusertest < / param > < param name = "login" > [email protected] < / param > < param name = "password" > 9B396EA828A00203FB3E8E69010FE537 < / param > < param name = "extlogin" > [email protected] < / param > < param name = ' type' > user < / param > < param name = "send email" > false < / param > < param name = "a-kids" > 0 < / param > < param name = "email" > [email protected] < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  What do we lack?

  Thank you!

  Here's the docuementation for loging in there with a Headder HTTP Adobe Connect 9 * log from an application

  Because there may be some changes to the files on the server, you may need to work with Adobe's Support to see if they can be changed in the hosted environment. Acrobat Connect Pro help | Acrobat Connect Pro Support

• http authentication fails on all sites, don't ask for user/pass

  Hello

  After an update of apt - get, sites that use HTTP authentication do not ask for credentials and go directly to HTTP:401. It only affects this browser, others have no problems. I've also updated a FF in Windows, no problem there after the update.

  See https://developer.mozilla.org/en-US/Firefox/Releases/30/Site_Compatibility#Security for details and workaround.

• HTTP authentication

  I'm trying to get authentication for HTTP to use radius AAA and seem to have problems with the privilege level. It works very well with the SSH connection, but does not work with the web management. The model is a WS-CBS3130X-S-F 12.2 (58) SE1 running with version 1.001.002 http...

  Config is:

  AAA new-model

  AAA authentication login VTYSandHTTP local radius group

  AAA authorization exec VTYSandHTTP group local RADIUS

  IP http server

  IP http authentication aaa-authentication of connection VTYSandHTTP

  IP http authentication aaa exec-authorization VTYSandHTTP

  IP http secure server

  RADIUS server

  auth-port 1645 acct-port 1646 ipv4 address

  key

  line vty 0 4

  exec authorization VTYSandHTTP

  authentication of the connection VTYSandHTTP

  entry ssh transport

  line vty 5 15

  exec authorization VTYSandHTTP

  authentication of the connection VTYSandHTTP

  entry ssh transport

  
  

  That's what I get when I try to open an HTTP session

  Name from the list of authentication of the connection HTTP AAA: VTYSandHTTP

  Name from the list of authentication of the connection HTTP AAA: VTYSandHTTP

  HTTP: Level 15 authentication failure

  Joseph,

  Your configuration is quite correct. However, you hit a bug on 12.2 (58) SE train,.

  CSCtq55319 http IP as aaa authentication does not work

  reproduced by

  CSCtq94595    HTTP AAA authentication doesn't work anymore after upgrade to 12.2.58S

  To resolve this problem, please update to 15.0 (1) SE1.

  Note: You must also make sure the RADIUS server sends the "shell: priv-lvl = 15 ' cisco-av-pair for this work.

  Kind regards

  Dev

• Terms and conditions for applications protected by OAM.

  Hi all

  We must apply the terms for applications protected by OAM.

  Details of the environment:

  OAM: 11.1.2.0

  Application server: Weblogic 10.3.6

  Application 1

  Application 2

  Application 3

  Application 4

  Here's the scenario:

  The user must be able to access the application only once the user has accepted the terms and conditions.

  When the end user accesses any of the above request, after authentication successful OAM must check the terms and indicator of Conditions in the OID and redirect page must be based on the value in the General conditions of the flag.

  1. 1 T & C applies 0 page should be redirected to the TERMS page, where the user can accept or reject the conditions of access to the application.
  2. 2 T & c value is 1 page should be redirected to the home page of the application.

  Any help appreciated.

  Concerning

  A presilia

  Rather than specify the redirect on the success of the authentication url, you can specify on the success of authorization. Redirect on the success of the authentication happens only in the case of authentication and is not if you are already authenticated (case of SINGLE sign-on).

  In permission to answer, you can pass protected resource info (url of the application where T & C page should redirect) as

  ${request.res_host}: ${request.res_port} ${request.res_url} to refer to the political management to protect resources and activate SSO-11 g Release 2 (11.1.2)

  hope this helps

• Informatica Application with OAM 11g Setup

  Hello
  
  
  Could someone help me to protect Informatica application with OAM 11 g.
  
  
  
  
  
  Thank you
  Sony

  -First thing you can do is ask Oracle (support.oracle.com) if they have no documentation for the integration of OAM with Informatica.
  - Alternatively, you can check out the link here, which has steps of OAM integration with various third-party applications
  http://docs.Oracle.com/CD/B28196_01/idmanage.1014/b25347/Siebel.htm#Siebel

  You must have the location of the repository informatica, portnumbers etc. Try configurations by seeing examples in above link.

  Kind regards
  GP

• How can I config multiple basic HTTP authentication in a casting of BPEL

  I read Edwin's blog on SOA suite with HTTP Basic authentication. http://Biemond.blogspot.com/2010/08/HTTP-Basic-authentication-with-SOA.html. I tested as it said and it worked. However, I wonder, if there are several services that need different basic HTTP authentication, how can I do that? I checked the security token, it is not something as a reference or a name that I can put the match in the configuration of the OM credentials. Thank you.

  read the comment just below the post that explains how to proceed by reference. the only thing you need to do is add a reference by the different credentials.

• OAM 11g - Options

  Hello
  
  I had installed OAM 11 g, 11g of OSH and Webgate 11 g OSH. In the OAM administration Console (http:// < hostname >: 7001/oamconsole), under the policy configuration, I have the option of authentication scheme to set up.
  
  I created a new authentication scheme for FORMS based authentication. But I'm not able to find the option to set the 'default' Plugins such as 'Credential_mapping' and 'validate_password '.
  
  Can someone help me to explain the difference of scheme of authentication of 10g and 11g... And also the parameters used for the 11g authentication scheme.
  
  Thanks in advance,
  Sandeep D
  
  Published by: user13476138 on May 13, 2011 12:00 AM
  
  Published by: user13476138 on May 16, 2011 02:06

  Hi Sandeep,

  In the current version of OAM 11g, these authentication scheme plugins (credential_mapping, validate_password, Custom Plugin) is not yet supported. As far as I KNOW, also disclosed that they plan to use these plugins for the configuration of the Modules for authentication of OAM 11 g. In 11g Release, you can use the Modules of authentication with LDAP user identity stores inherited for authenticating access to the resources of Protected OAM 11 g

  Kind regards
  Ajay Babu Pentela

• OAM 10 g in OAM 11g Migration

  Hi Experts,
  
  Will there be a way to migrate the MCO 10 g in OAM 11 g?
  
  If so, what is the name of the migration tool and what are the settings that will be migrated and what needs to be done manually?
  
  Thanks in advance,
  Sandy.

  You can't get stuff together OAM 10g a OAM 11 GR 1 material because of the changes in the architecture. The GR 11, 1 field upgrade utility upgrades only Access Manager average level for OSSO10g components. But OAM11gR2, you can migrate selected agents, political areas and their associated artifacts as host identifiers, types of resources resources and the Oracle 10 g Access Manager authentication schemes.

  The advantage of this migration is OAM 10 g and OAM 11 g can coexist in an environment until all artifacts are migrated successfully.

  http://docs.Oracle.com/CD/E27559_01/doc.1112/e28183/oam_mig.htm#CHDHFGJH

• Update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Windows 7 to stop working.

  Original title: Updates

  The last update update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Win7 stop working. This includes IE8, MS Office10 and a few others. Whats with THAT! I have updates blocked for now, until the writers get it sorted.

  Hello

  The article mentions that this update cannot be uninstalled. This software update is a prerequisite to install a service pack. In addition, this update improves reliability when you install or remove service packs and updates for Windows Server 2008 R2 and Windows 7.

  http://support.Microsoft.com/kb/976902

  Since you have problems with Internet Explorer 8 and Microsoft Office 2010 after installing the update, I suspect the involvement of a third party software conflict. I would like you to put your machine in aclean boot State in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart the computer as usual.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• What is C:/documents and settings/temp/application data/microsoft/fsx/fsx.cfg txt

  What makes c; / documents and settings/temp/application/data medium txt microsoft/fsx/fsx.cfg

  Hello

  1. what exactly is the problem that you are facing on the computer?

  2. have you installed Flight Simulator X on the computer?

  See the article and check if that helps:

  How to change FSX. CFG to set the maximum amount of autogen objects in a field cell

  http://support.Microsoft.com/kb/555739

  Please provide more information to help you best.

• When I try to run Age Of Empires with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  Former title: Trouble running games CD, post installation under Vista. That is to say 2 AoE, Warrior kings.

  I have vista on my laptop, I installed games like shogun and medieval total war and they both work perfectly, I tried to put it on the age empires and warrior kings: battles who are also on a cd format, I installed the last but they usually run after that. Although the instialltion is over, I get asked if I wanted to leave the program to run as administrator. : s

  DVD/CD drive recognize there is a disc, but does not work automatically. I can't install the program normally when I run the setup.exe for the game. When I try to run the program with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  I tried to run them in compatibility mode, using all variants. and also I tried soome of advice from the help article about the disk drivers. game discs are clean and one striped.

  Why can I install the program and access the drive to use the files it contains, but then not use the disk?

  Hello
   
  
  This problem may occur if one of the following conditions is true:
  a. you do not use the game disc to start the program.
  b. the CD player is not compatible with the program.
  c. using a copy of the program CD.
  d. you are not connected to the computer as an administrator.
  e. the programs interfere with the start of the game which is running but is invisible to you.
  f. the CD-ROM drive uses out-of-date drivers.
   
   
  I would ask you to try the methods listed in the article below:
  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.
  http://support.Microsoft.com/kb/228985/en-us
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm more able to launch a web page, when I click on the URLs in Email, Skype and other internet applications, etc.

  Original title: URLS not clickable links

  WinXP SP3 all updates
  AMD Athlon2 2.7 GHZ
  2 GB 800 mhz SDRAM
  256MB NVIDIA GeForce video

  I'm more able to launch a web page, when I click on the URLs in Email, Skype and other internet applications, etc.

  I downloaded the patch of MR Fixit of MS site that was supposed to solve the problem, but did not.

  Ran the restore of the system (for example successfully MS) in time before the problem started, but did not remedy problem.

  Scanned with Avast A / V & Advanced System Care 5 to remove all malicious software, viruses, registry fixed etc. Did not help.

  Any suggestion would be appreciated. ;-)

  Have you tried what Bruce suggest you try?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/unable-to-click-on-a-link-within-Outlook-Express/df6631b6-67c8-497c-9ED5-8559648eb88a