OAM password policy

Similar Questions

• OAM: password policy coherence between the Server LDAP and OAM

  Customer has an OAM installed using an LDAP server, say MS - AD 2003, as users, policies, and the configuration data store.
  
  The customer has configured their LDAP server, password policies claiming for example that the users passwords expire 60 days after they have been fixed and this departure 5 days before they expire, users, at the opening of the session, should be warned that their passwords are about to expire.
  
  Customer has configured identical policies inside the OAM.
  
  (A) consider the following sequence:
  
  Day X: user connects to the 'User Manager' component of OAM in the identity and, through 'My profile' admin console, changes his password.
  
  Day X + Y (1 < = Y < 55): the user connects to the MS - AD domain and sets its password interfacing directly the LDAP server, outside of OAM (for example: by pressing CTRL-ALT-DEL and invoking 'Change Password' in a field of MS-Windows, MS - AD-controlled).
  
  Question A.1) day X + 56: user tries to access a web resource protected by OAM: OAM made realize that the user has changed the password recently (through the LDAP server), and that should NOT be notified?
  
  Question A.2) day X + 61: user tries to access a web resource protected by OAM: OAM made realize that the user changed the password recently (through the LDAP server), and that should NOT be asked to change his or her password again?
  
  (B) consider the following sequence:
  
  Day X: user connects to the MS - AD domain and sets its password interfacing directly the LDAP server, outside of OAM (for example: by pressing CTRL-ALT-DEL and invoking 'Change Password' in a field of MS-Windows, MS - AD-controlled).
  
  Day X + Y (1 < = Y < 55): the user connects to the 'User Manager' component of OAM in the Administration of identity and through 'My profile' console, changes his password.
  
  Question B.1) day X + 56: the user is trying to connect to the MS - AD domain: MS - AD made realize that the user has changed his password to recently (OAM), and as it should NOT be notified?
  
  Question B.2) day X + 61: the user is trying to connect to the MS - AD domain: MS - AD made realize that the user has changed his password to recently (OAM), and that should NOT be asked to change his or her password again?
  
  
  
  Kind regards
  
  
  Angelo Carugati

  (A) you're done. OAM is not aware of changes in password performed at the entrance to the user if the change does not take place through OAM. There is no good solution because you have two different versions of the truth, even if they are logically equivalent policies with us will tell the expiry of 60 days, apply to the same person. A possible solution is to be synchronized with the attributes that store things password policies in AD (as when the user has changed the password) to the attributes of the political equivalents of associated storage stuff in OAM password (as when the user has changed the password - oblastsomething). I don't know if this synchronization is still possible, but it's an idea. AD and OAM attributes can both live in AD, but they are distinct attributes in separate containers.

  (B) you are ok. AD is aware of the change, and is aware of the change.

• OAM: What identity server is used by the password policy?

  Hello
  
  Setup of the OAM has two identity (ois1, ois2) servers, two webpass (wp1, wp2) on two web servers. WP1 wp2 pointing ois2 is pointing to ois1 only
  
  We have two sets of Policy manager, the server access and WebGate. GT1 is pointing to aaa1 and wg2 points to aaa2.
  
  Now, when a user tries to access a page protected OAM webgate and password policy is applied, make the server identity comes into picture? If so, which identity server is used here, ois1 or ois2?
  
  I want to use ois1 for all requests coming from Web server with GT1. How can I do?
  
  Thanks in advance.

  Hi anon,.

  The process is that when executing the authentication (specifically the validate_password plugin) is the access server that evaluates the password policy. If necessary, OAM then redirects the user to a WebPass for password or challenge/response according to the redirects specified in the password policy.

  Thus, ois is relevant that the user is redirected (as the WebPass connects to the ois) in the case otherwise, it is not used at all - and you can control who access or servers are used by the WebGate on AccessGate configuration screens. I can't imagine a way to OAM to password policy redirect to different WebPasses based on the WebGate is used.

  Kind regards
  Colin

• Creating password policy error: Incorrect domain name

  Hi people,
  
  I am getting rather strange error ('Incorrect domain name") while trying to create a new password policy in OAM to activate the user account locking. I provide a name for the password policy and use the simple field of policy, I created in the 'domain password policy", as well as some fundamental values. I know it is something simple, and yet I can not understand why the domain name would be incorrect.
  
  Any help is greatly appreciated.
  
  Thank you
  Roman

  Hello

  "Domain password policy" is usually the domain of the user (for example: or = users, dc = abc, dc = com). You can try on the same day?

  -Aravind Pramod

• error message "Windows cannot remove the password. "Password policy or account require the account has a password.

  original title: remove administrator account or remove password

  I am trying to remove a user administrator account or remove the password and I get the error message below. Also, I can't delete the password as an administrator in Windows 7 32 bit or delete the account. I get this error message "Windows cannot remove the password. "Password policy or account require the account has a password. I tried to create another admin account, but it does however not take away the password or delete the account else

  Someone has put a policy on your machine to enforce some rules for passwords. Best is to ask that person to change these rules for you. Alternatively, you can run gpedit.msc, then follow this path to edit yourself: Local computer policy / Computer Configuration / Windows settings / security settings / account policy / password policy.

  Note also that:
  -You cannot delete the built-in Administrator account.
  -Administrator with a blank password accounts is a big security risk.

• Cisco ASA 5516 - password policy

  Hello

  If I configure life 90 days... before the password expired...

  1. any notification to the course before the password expired?

  2. the password related to the local password so anyconnect VPN?

  AnyConnect user can change his or her password. before 90 days have passed?

  3. password policy feature you haven't to 5,0000 25 firmware?

  password_policy.jpg

  

  1 NO.

  2. Yes - as long as you did not check the box at the bottom of this form.

  3. for the expiration policy alone - Yes-, this feature has been around since ASA 7.1 (1). For the most complete set of features (length, character types etc.) - No. These features were introduced in the version of the Software ASA 9.1 (1).

• Is there an API to change the device password policy?

  As we know, the BES IT policy, we could configure password policy such as:

  1 history of max password

  2. password max attempt

  3 password expire

  4. minimum length of password

  etc...

  I did some research on the internet and I saw no API to get the Java application. I just want to confirm with experts here.

  Thank you.

  That's right, that there is no API for this.

• I got the message "the u of typed password does not meet password policy requirements, check the minimum password, the password complexity and password history requirements" when changing password

  Original title: password problem

  When I try to write a new password on my windows ultimate 7, I received this message.

  "the u of typed password does not meet password policy requirements, check the minimum password length, password complexity and password history requirements"

  What can I do? I can't change my password :(

  Hi MedoXW,

  This means that you must create a password that meets all of the requirements

  1. make sure that the password is at least 6 to 8 characters.

  2. make sure that the password includes at least 1 capital letter, 1 number and a symbol as "!" or "$".

  3. make sure that the password is not one that you have used in the past.

  Follow all these rules and it should work.

  I hope this helps.

• clarification of password policy

  Hello

  We need to change the existing password policy to include characters not allowed = / @&.

  Question:

  (1) will affect cela existing users who have the password set with above characters? can they connect with their old password if it contains the characters above?

  Please suggest

  Thank you

  Yes, it will not affect any of the existing users. They can connect with the old password.

  Password policy comes in the picture during the first generation/setting a password.

  Next time if it exists user will change their password, then they will be forced to follow the new password policy.

  It should be easy for you to test in a smaller environment.

  ~ J

• OAM authorization policy: scenario

  Hi all

  I need your advice to implement a solution as described below (high steps level that I can follow and implement):

  Current architecture:

  I have Siebel, IOM, OAM and OID. Users are provisioned to Siebel by IOM and connection OAM is responsible for the authentication/authorization for Siebel resources.

  Requirement:

  There are many users who are connected to using OAM and I need to make a change, a change for a specific group of users who are actually allowed to access the resource.

  Example:

  The Group has, can access resources abc

  Group B, cannot access resources abc.

  Ask you to help me with the approach without involving the IOM.

  Thank you

  Varun

  You have active LDAPSynch?

  If yes stores the user identity of the OAM is the same as the LDAP directory configured in the IOM LDAPSynch

  In the case of LDAPSynch, ROLE created in IOM translated by LDAP groups. I was referring to these LDAP groups to use in the OAM authorization policy. In a State of identity, you can also add LDAP groups. See screenshot 18-5 on top of link. 'Add users & groups' select option in "State of identity".

  Organization of the IOM is not related to LDAP groups.

  With regard to the UDF

  In the LDAP synchronization scenario if the user UDF is also get stored in the LDAP directory in the profile of the user, then you can use LDAP attribute in the user's profile to set the authorization policy in OAM. This can be done by specifying "Filter Add Search" in the same"identity".

  Concerning

  Aakash

• password policy vCOPS

  Hi all

  I would change the minimum password length 3. I have enabled the option on the password policy tab, restarted the vCOPS VAPP, but nothing. VCOPS told me that the length of password minimum must be 5.

  Can someone help me?

  Thank you

  Matrix

  Thank you. 5 is the min length as you have seen for local accounts. I can't say that I've had someone want a shorter than 5 char password, but you can still use a LDAP user account for this shorter password.

• How to generate the random password policy password knowing resources

  Hello
  
  Any body tell me how to generate the random password policy password knowing the purpose of resource in OIM11g
  
  Kind regards
  Mireille Nayan

  Hi Pascal,.

  You can try the below code snippet:

  UserRepository your = new DBUserRepository();
  UserInfo user = your.getUserInfo (take);
                 
  ResourceRepository rrepo = new ResourceDBRepository();
  Resource = rrepo.findResource (resourceName);
            
  By PasswordPolicyAssignmentsRepository = new PasswordPolicyAssignmentsDBRepository();
  PasswordPolicyRepository ppr = new DBPasswordPolicyRepository();
  The list of passwordPolicyAssignments = par.getPasswordPolicyAssigments (resource);
  PasswordPolicy passwordPolicy;
                 
  PasswordPolicyAssignment passwordPolicyAssignment = passwordPolicyAssignments.get (0) (PasswordPolicyAssignment);
  If (isApplicable (passwordPolicyAssignment, {getMappedAttributes (userInfo.getAttributes ())})})
  passwordPolicy = ppr.find (passwordPolicyAssignment.getPasswordPolicyID ());
  }
  RPG RandomPasswordGeneratorImpl = new RandomPasswordGeneratorImpl();
  password = rpg.generatePassword (userInfo, passwordPolicy);

  Kind regards
  GYAN

• After the password reset. Able to connect with the old and the new OAM password.

  Hi all
  
  I have it here's the installation program.
  
  OAM - 10.1.4.2.0 (BP08)
  OVD - User store
  Advertising - Store configuration and policy.
  
  Here's the scenario.
  
  I have a user (spokuri) OAM with the password (Oracle123) and im able to connect with these credentials.
  
  But it's when I reset the password for Oracle1234 for spokuri using the administrator credentials.
  
  Next time, when I try to connect with these credentials(spokuri/Oracle123) should not allow me to open a session to the User Manager since I changed the password to Oracle1234. Am I rite?
  
  But, it allows to connect to the User Manager with the old password and the new password.
  
  Please let me know your comments.
  
  Thank you and best regards,
  
  Siva NAKI.

  Hi Siva,

  If the announcement is you user store (even through OVD) then this could be a function of Microsoft:

  http://support.Microsoft.com/kb/906305/en-us

  Kind regards
  Colin

• Apply the password policy when you reset password

  I want to apply password history, age Minimum and age Maximum while resetting the password in Active Directory. There is no way to do before resetting the password being an administrative activity, but it's in the news that we can apply this policy even as the password reset. I just want to know if it's true, how we can do it, or by using the attributes that?

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home

  It will be useful.

• ACS password policy

  My company wishes to replace the existing LDAP servers with Cisco ACS.  A requirement of our VPN security policy is that the user must change his password VPN account before their first newspaper in.  If the user tries to connect to the VPN without changing their password, then they are denied access.

  Is there a rule in ACS which can achieve this?

  Hello Michael,

  Yes, there is a way to change the password, you will need to set the 'password-management' under the Group of the tunnel you have created for this connection with the AAA server that will authenticate users, please consider the following information:

  GBA can be configured to check users in an AD database. Change and at the end of the password is supported when Microsoft Challenge Handshake Authentication Protocol version 2 (MSCHAPv2) is used;

  On a SAA, you can use the password management feature, as described in the next section, in order to force the ASA to use MSCHAPv2. ACS uses the appeal of Common Internet File System (CIFS) Distributed Computing environment/Remote Procedure Call (DCE/RPC) when it comes into contact with the directory of the domain controller (DC) in order to change the password.

  ASA may use both the RADIUS and protocols GANYMEDE + to get in touch with ACS for a password AD change, the command:

  ASA (config) # tunnel - group general attributes

  ASA(config-tunnel-General) # password - management

  For more information about PAP and MSCHAP with RADIUS, you can find it here:

  http://www.Cisco.com/c/en/us/support/docs/network-management/remote-ACCE...

  Please proceed to the note this post and the previous one and mark it as correct, keep me posted if anything happens!

  Kind regards

  David Castro,