OAM protect a resource simple .asp

Similar Questions

• Integration of OAM (11.1.2.0.0) with the OIF (11.1.1.2.0) and the Protection of resources

  Hi Oracle community!  It's my first post here on the forums, so please bear with me.

  I have a question about the integration between the IOF, acting as an IdP and OAM as the authentication engine.  I'll start with our Setup and the way we protect resources and then finally to deliver my ultimate question.

  First things first:

  We use the OIF 11.1.1.2.0 and OAM 11.1.2.0.0 (looking at upgrading OAM/OIF soon to 11.1.2 patch set 2, so we get full OIF blown in OAM packet and not only the part of MS).

  I essentially was self-taught in the integration of the products and did the best that I can.  We have that in the production running the full blown federations now, so that we know that we are doing something good.  I won't say that we have done is the perfect solution, but it is the way in which we understand how products interact and worked at the time.

  We have OIF, acting as an IdP (without SP yet), configured to use our OAM authentication search engine.  According to the documentation, we read through, when this configuration occurs, when the IOF receives a request to start the process of Federation (/ fed/PDI/initiatesso? providerid = XXXXXX), she sees the user is not authenticated and will forward to the authentication engine.  In our case, this means that we forwards the request to an internal flow in the OIF (/ fed/user/authnoam11g) which crosses the webgate, then check with OAM, if it is a resource that is protected or not.  In OAM, we defined a resource to protect/fed/user/authnoam11g so she who collects and authenticates the user via the policy regime, etc.  Once that ends, she goes back to the OIF to finish the assertion.

  Keep in mind, I'm aware of a lot more of what's going on in the process, but it's the main room that will be the basis of my question.

  So than stated above, we have a single policy protected for all federations from the OIF since "out of the box" OIF doesn't have several URL structures that it will send to OAM based on service provider being accessible.  For me, this is a small problem because I want to perform specific authorization controls in OAM based on the providerid who had been requested to the OIF.  OIF, as far as I know, completely removes the URL of origin that was requested and query parameters (for example providerid) which means that I have little or no information of the initial request to any robust condition checks in the policies of the OAM.

  My question to the community would be:

  Is it possible for the headers of the OIF or query string parameters to be going to OAM via header variables/session variables/etc. and then accessible through licensing of OAM requirements to do solid state audits in order to allow/deny access based on rules?

  A small example:

  I am a customer who asks the following Federation on OIF:

  1. https://oifhost/fed/IDP/initiatesso?ProviderID=partnerAlias GOLD https://oifhost/FED/IDP/samlv20 <-the samlv20 would include a request for authentication with the good provider
  2. IOF receives the request and begins creating processes and the SAML assertion.  It is determined that the user is not authenticated, so OIF will forward to the authentication engine.
  3. OIF transmits to the https://oifhost/fed/user/authnoam11g
  4. OAM protects the url "/ fed/user/authnoam11g" to make the authentication/authorization.
  5. The point of authorization, I want to build conditions that are basically looking for the "providerid" in initial demand to run specific rules to allow/deny cons.  Currently, it is not possible that I know, and that's what I want to know.
  6. Once the authentication/authorization, OAM refers the request to the OIF where he finished the SAML flow and sends the statement to MS.

  In step 5, I would need a mechanism to find the providerid (value of the header, cookie, session, etc.)

  I posted this same question on another blog of Oracle and received a reply that I want to do with the current configuration is not supported.  In order for me to get the desired result, I need to upgrade to patch set 2 of OAM with the fully integrated OIF.

  See response to blog here:

  https://blogs.Oracle.com/dcarru/entry/authorization_in_oif_idp#comments

• Protection of resources within the custom-dev-starter pack

  Hello

  I've added a few pages of *.jspx to the custom-dev-starter pack. It seems that all the pages can be reached who without credentials - which translates again as components that is personalised, that can be referenced without having to provide credentials of the IOM, on any level.

  Example:

  secret-stuff/secret.jspx

  is accessible by entering:

  / Identity/faces/secret-Stuff/secret. JSPX

  Is there a way to protect resources somehow? We have not installed OIA, use the product is not an option. It would be nice to be sent to the login screen related to the context of identity.

  Hope someone knows something about this topic

  Kind regards

  Vegard

  Have you added entriesadfc-config.xml

  • Do not use pageFlowScope or backingBeanScope by registering a bean directly to adfc-config.xml . Use the session, and request scopes instead. If you have built your own workflow, save your bean there can be done with any required scope.

  http://www.Oracle.com/technetwork/articles/IDM/Singh-OIM-UI-2159006.html

  ++ You must update the file jazn-"Data.xml"

  How to deploy a new stream ADF task in OIM 11 g R2 - identity management

  The following lines in jazn-"Data.xml" present to user_projects\domains\idmdomain\servers\oim_server1\tmp\_WL_user\oracle.iam.console.identity.self-service.ear_V2.0\6bddg\META-INF\jazn-data.xml oracle.adf.controller.security.TaskFlowPermission /WEB-INF/oracle/iam/ui/sample/homepage/tfs/hello-world-tf.xml#hello-world-tf reviews

  ~ J

• OAM - protection of JBoss Application Server

  Is there a method to protect a server JBoss App a user simply hit IP address of servers JBoss and a direct link to authenticate through OAM? I'm using WebGate to force users to connect with Apache and IIS, but I don't know what to do with my application server.
  
  Thanks in advance.
  Bryan

  Bryan, I recommend disabling the HTTP listener on your JBoss server and configuration AJP plugins on your web server where the GT is installed to communicate to the AJP service in JBoss. See http://en.wikipedia.org/wiki/Apache_JServ_Protocol for more information about AJP. Of course, there are also conventional methods of this security such as IP / port filtering (either locally or on a f/w).

  Thank you

  Ryan

• Protect an Apllication of HTML using OAM 11 g

  No matter which allow high level measures to integrate (protect) an Apllicaion of HTML using OAM 11 g and OID as identity store
  
  
  
  
  
  
  
  Thank you
  Sony

  The exact steps for OAM protect all applications are:
  -Create your instance webgate configuration of access system
  -Install webget on the machine running HTML page
  -Create a policy area in my policy areas in Access Manager to protect your HTML page
  -Create rules and authentication schemes in authentication of OAM management section
  -Now go to my area of policy and create the resources that you have to protect. You must add your link to the page html here
  -Create authorization rules based on the group. Member of this group will be provided access to the page if it meets the rules and expressions mentioned here
  -Create default domain policy rules and policies for resources and define all the rules here viz authentication, authorization and audit. All this is in the section areas MyPolicy
  -Create strategies to protect your html pages and the resource based on attributes
  -Test with tester to access polcies
  -Now, configuration done, start testing :)

  Here are the steps high level made for OAM 10 g to protect a Web page. I did not for 11g, but it should be almost the same.

  Kind regards
  GP

• How to protect Sun Web Server with OAM

  Hi people,
  
  I need to protect a resource on the Sun Java Web Server with OAM 7. It is similar to the OSH protection? Anyone who has tried?
  
  Thank you, novel

  WebGate plug-in for Sun Java Web Server 7.0.x are available only for environments mentioned in my previous answer. You can see the matrix of Certification and check with Oracle Support what will be the realistic solution for your environment.

  As far as I KNOW, he is there no download separated.

• When I run "sfc/scannow" he gave the following results; "windows resource protection found corrupt files but was unable to fix some of them

  * O.T. AND NON-RESPONSE ERROR

  Hi, my laptop (Dell vostro) has been very slow lately, when I run "sfc/scannow" he gave the following results; "protection of resources windows found corrupt files but was unable to solve some of them"

  How ca I fix it please help

  Select Start, all programs, accessories, right-click right-click command prompt and click Run as administrator in the menu dropdown. Type or copy / paste: findstr/c: "[SR]" %windir%\Logs\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt' and press the ENTER key. You will find a sfcdetails.txt file on your desktop.

  "Please note there are three spaces in the command: findstr - c/c/c, between [SR]" and%windir% between CBS.log and > ' % userprofile .

  Please download a copy of your file sfcdetails.txt on your OneDrive as a shared file and post a link here. Enter sfcdetails.txt in the search box above the Start button and press the ENTER key to locate the file created.

  Note The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer. The file contains information about the files that are not repaired by the System File Checker tool. Check the date and time entries to determine the problem files that were found last time that you ran the System File Checker tool.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• sfc/scannow error message - "Windows Resource Protection could not perform the requested operation".

  Recently, things are held in my computer after trying themes. I don't know what I fiddled with, but I do know something ExplorerFrame.dll in system32 and sysWOW64. I've tinkered with it to try to change my navigation settings. (The arrows in windows Explorer)  I don't know if that's the problem, but my main problem is when I try to save anything, or "save under" or try to save anything even in microsoft word or adobe reader, none of the folders in my navigation pane is there! It's just empty! I tried to solve this problem with sfc/scannow, but the message that I put in the title appears when it reaches 10%! I've tried everything literally! I tried running sfc/scannow offline, and it comes up with a message 'Protection of resources Windows could not start the repair service.' I also tried to check in my services to see if the Windows Module is manual in the startup type, and it is! The last thing I could think that I tried was the start in safe mode with command prompt, and it still does not. If anyone can help me, please! I've tried everything! * I forgot, I have try running CMD administrive rights, still won't work *.

  Thank you for the help, but I figured it out by myself. I replaced the old version ExplorerFrame.dll in system32 and sysWOW64 folders to a new! I managed to do it by copying the correct files to another computer and replacing them with the 'old' I have fiddled. Thanks for your help!

• Urgent: Authorization of OAM

  Hi all
  
  I'm trying to implement permission such as the user of belonging to a certain group of oid (oid is my store of users) are allowed to see a page. I implemented the strategy approval accordingly but somehow, it was not implemented and all users are able to access the http resource. I tried with authentication of faucet base OAAM and LDAP authentication simple oam on LDAP authentication, but the same results, my Tester of access, I get the success of permission each time.
  
  Details of my environment.
  
  OSH :-11.1.1.6.0
  WebGate :-11.1.1.5.0
  OAM :-11.1.1.5.0
  
  details of the strategy: -.
  Authorization policy
  
  Name:-political protection of resources
  Success URl:-null
  URL of failure:-null
  Use the implicit constraints:-ACTIVATED
  Identity:-DISABLED
  
  Resources:-protected.html
  
  Constraints
  Name:-enable Group
  Class:-identity
  Type:-allow
  
  Constraints: Details
  Type: allow
  StoreName: OIMIDStore (OID)
  Entity name: group1
  
  Answers
  Name: OAM_REMOTE_USER
  Type: Header
  Value: $user.userid
  
  I'm not going wrong somewhere or some other configuration is required for the feature to work.
  Please let me know if you need more input from me.
  
  Any input would be useful
  
  Kind regards

  Hello

  Before watching your authorization rules, can check the SSOOnlyMode parameter in the oam - config.xml is set to 'false '? Otherwise, OAM will only with authentications, no permissions.

  Kind regards
  Colin

• 10g WebGate Apache with OAM 11 g installation

  Hi all
  
  I installed Apache 10 g WebGate Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate on RHEL 64-bit machine. I OAM 11 g installed in another server and there is no time difference between webgate and machines OAM.
  
  I am following this http://docs.oracle.com/cd/E15586_01/ document doc.1111 /e15478/webgate.htm#CACHEHEC for 10 g WebGate in OAM 11 g installation. I created OAM 10 g Agent since the OAM Admin Console (do not use oamreg.sh) and ID of the host, the policy areas are created automatically without any problem.
  
  I installed the webgate thus and webgate is properly configured with the access server.
  
  In accordance with this step to install artifacts (and certificates) to Webgate 10 g in the document, I am confused as the files to be copied to WebGate location to complete the installation. What is someone is able to do this successfully? Pointers are very useful.
  
  Without webgate configuration httpd.conf of Apache, we are able to access the Console of Apache correctly. With WebGate configuration Apache COnsole throws the error as shown below.
  
  Not found
  Requested URL / was not found on this server.
  
  What is the expected behavior after completing the 10 g WebGate installation Apache? Redirect OAM Login page automatically like SST 11 g WebGate (with OAM 11 g)?
  
  Thank you
  Mahendra.
  
  Published by: 898990 on December 7, 2011 23:23

  Hi Manon,.

  The WebGate is clearly at work, because you don't get the "unable to communicate with the access servers to the" message and it meets the indicator deny not protected. It seems that there is none of the Application areas that protect resources on the WebGate (you selected the option to create policies by default when you created the WebGate?). If you have a 11g WebGate which is to protect the resources, the best way to set up the 10 g WebGate is probably to add a resource to the existing App Somain, that protects the resources of 11g, ensure that you specify a host ID that includes your 10g WebGate's favorite host.

  Kind regards
  Colin

• OAM headervars

  Hello, OHS 11.1.1.3, Weblogic 10.3.3 and Oracle Access Manager 10.1.4.3. Using mod_wl_ohs to send the request to the application server and protect a resource with OAM. Try to get the user has been authenticated.
  Located on the uid attribute success auth type headervar and name REMOTE_USER. I've protected the resource and sign in. I try < % = request.getHeader ("REMOTE_USER") % > and get null.
  I haven't used a redirect page, is this a problem? I don't want to redirect, I want just the uid who authenticated. I see messages from people using this technique, what don't get me?
  
  Thank you

  He appears on the side of weblogic when you use< %="request.getHeader("MY_VAR")" %="">

  -Vinod

• Is an FPGA host Interface a shared resource lock?

  I'm curious to know if the FPGA host Interface node is a shared resource. Which means, if I have a loop timed on a target time real LabVIEW (e.g. cRIO) who is reading and writing of the FPGA using the Interface of the host. The determinism of this loop will be concerns touched if I have other signls on the FPGA using the Interface of the host in a separate loop (a loop delay or a normal life while loop).

  More tersely said, is the Interface to the FPGA host a shared resource that can cause a reversal of priority if called from two separate loops?

  Thank you.

  Hey Southern_Cross,

  The Interface of the host as a whole is not a shared resource that is protected by a global lock, but calls to functions of specific host interface can acquire locks to protect shared resources. If you let me know what you call of each loop, I can let you know what kind of interactions are possible.

  Priority inversion should not happen. You see something akin to the inversion of priority for you? If so, I would be interested in the details, because this is the kind of issue, we take seriously.

  Thank you

  Sebastian

• How can I remove a USB write protection

  my USB is write-protected how to remove it?

  Hello

  What operating system do you use?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it.

  Write protection is an element of protection which prevents accidental deletion of important data. Sometimes turning off the write protection is as simple as uncapping the USB key to find a manual switch. If your player lacks an external switch, the procedure requires a few steps to complete.

  (a) turn on your computer and plug the drive after that your operating system is loaded.

  (b) open 'My computer' and the list of readers of research until you find your USB drive letter

  (c) right click on the name, then click 'properties '. Browse the tabs until you see the option to remove the write protection. If this does not work, proceed to the next step.

  (d) visit the website of the company for your USB key. Go to the help or support section and search for "write protect".

  (e) search the Internet for software that will remove the write protection. Download the program and install it on your computer.

  (f) open the software. Follow the instructions to remove your USB write protection.

  I hope this helps.

• I am running windows vista sp2 and I get an error message "cannot load resource dll" How can I fix the problem.

  Have noticed that my history of visited web sites is saved is more and the error message above appears whenever I start my laptop, I tried to download ie9 instead of run the ie8 I have, he (ie9) is not installed. I have also tried to use the repair and fix the items, but they don't work anymore. can anyone help? TY

  Hi John,.

  (1) how long have you encountered this problem?

  (2) what is the complete error message you receive at startup?

  (3) do you get an error message when you try to install Internet Explorer (IE)?

  (4) are what patches you referring? What happens when you try to invoke?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  You can see the steps by Afzal T and Azeez N in the links below to solve problem of navigation history

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/Internet-Explorer-will-not-save-history/c06284ac-595e-400F-831C-7aa79948de1d

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/Internet-Explorer-8-does-not-save-all-history/3533d7d4-72de-45B9-AAE9-1db7b6cba5d7

• USB key is always write protected even if the value is zero

  WHEN READ VALUE IS SET TO ZERO PENDRIVE NOT REMOVED THE WRITE PROTECTION

  Hello

  1. Are you having the same problem, if you connect the USB to different computer?
  2. Are you having the same problem if you connect different USB key to your computer?
  3. What is the brand and model of the pen driver?
  4. Have you tried making the virus for USB scan?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it.

  Write protection is an element of protection which prevents accidental deletion of important data. Sometimes turning off the write protection is as simple as uncapping the USB key to find a manual switch. If your player lacks an external switch, the procedure requires a few steps to complete.

  (a) turn on your computer and plug the drive after that your operating system is loaded.

  (b) open 'My computer' and the list of readers of research until you find your USB drive letter

  (c) right click on the name, then click 'properties '. Browse the tabs until you see the option to remove the write protection. If this does not work, proceed to the next step.

  (d) visit the website of the company for your USB key. Go to the help or support section and search for "write protect".

  (e) search the Internet for software that will remove the write protection. Download the program and install it on your computer.

  (f) open the software. Follow the instructions to remove your USB write protection.

  I also suggest you analyze your USB key with the Microsoft Safety Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.