OBIEE 11 g: error - exceeded configured the maximum number of authorized release

Similar Questions

• Error already have the maximum number of partitions, impossible to reclaim the unallocated disk space

  Original title: recovery disk unallocated space - please help

  I bought a lenovo z370 and it came with a partition of a disk c with 653 GB NTFS and d lenovo 30 GB drive and two other drives without names like d or e simply unamed with 200 MB of space and another with 14 GB of space... now to partition C drive more far I used the shrink option and shrunk 200 GB which now shows as unallocated space and when I try to create a new volume on it it says I already have the maximum number of partitions... What do I do now? How to restore this 200 GB of unallocated in my c drive space or do in another player... Please please help

  And see if I've followed the process this last link of how to re-partition my drive is what I did in the first place and because I got 4 partitions as I detailed it in the other answer, I have written that if I reduce my c drive, it becomes unallocated space, and even with the new volume Wizard does not become a player since I get an error message have already 4 partitions...

• Lightroom 6 used the maximum number of computers

  Recently, I had a complete system on my desktop PC crash and had to replace my card motherboard and CPU. Since that my copy of Lightroom 6 tells me it has already been used on the maximum number of authorized machines. Other than disabling of copy on my laptop (the second device), can someone tell me how to get my copy to work on my PC refurbished please?

  Hi RefereeJones,

  Please see the troubleshooting link below.

  "Activation limit reached" or "connection error impossible ' with Adobe applications

  otherwise contact Adobe Support: contact customer service

  Let us know if that helps.

  Kind regards

  Mohit

• Connect the question: "you can't access this meeting because you are already attending the maximum number.

  Hello

  Since Monday, we often get the error message "you cannot access this meeting because you are already the maximum number of authorized meetings (2). "Please close one of your meeting rooms, open" when you try to enter in the meeting rooms.

  We checked several times and we * never * have other meeting rooms to open, not even to other accounts.

  We also does not change our subscription or our account.

  We then logout / login several times before we can enter the meeting room.

  It is very annoying, because we use Adobe Connect to give training courses, and teachers can not connect.

  We thought is a temporary problem with Acrobat Connect Pro, but as said, he dwells on since Monday, March 18, 2013.

  Can someone help out us here?

  Thank you

  Jorma Hello,

  Thanks for your reply.

  If it is due to a change of political license by our Adobe reseller application. They were not informed of this change :/

  So nothing to do with Acrobat Connect Pro is.

  All the best

• NonLinearFitWithWeight do not erturn of error if exceeded the maximum number of iterations

  Hello

  It seems to me that the NonLinearFitWithWeight function does NOT return an error if the maximum number of iterations is reached without achieving a solution – unlike the description in the manual...

  Previously, I had reported a bug related to the NonLinearFitWithMaxIters function that has been fixed in CVI2009 (bug ID 183434). However, since this function nonlinearfitwithweight is new on CVI2009, there could well be a bug too...

  Wolfgang

  
  

• Get a Virus message "the maximum number of secrets that may be stored in a single system has been exceeded.

  How to remove "the maximum number of secrets that may be stored in a single system has been exceeded?

  Download and run malwarebytes... see if that helps

  www.Malwarebytes.org

• can it be configured to increase the maximum number of Ethernet Adapater inside the virtual machine?

  with esx 3.5 and created a virtual machine to windows 2003 RC2 standard. VM configuration wizard gives the maximum number of ethernet adapater is 4.  It may be more like ESX 4 4?

  Thank you

  Michael

  Is not possible.

  It depends by virtual hardware version and ESX 3.x support only v4.

  André

• How to change the maximum number of specification for the search results

  If there are more than 500 system specifications, system would show 'maximum number of 500 records has been exceeded' when the user is trying to use '%' to find all the specifications. How can I change the maximum number showed the result of research? Thank you!

  Sorry, there is no configuration desinged to change this maximum number.

  But as a temporary workaround (it is not good for your performance), you can config MaxSearchResults property to a specific number of control ctlSpecSearch in Prodika\Code\Web\gsm\BaseForms\default.aspx, such as

  Please relate your performance if you config MaxSearchResults to be more than the default value of 500.

• NiDAQmx limits the maximum number of analog samples which can be read / buffer?

  I try all the time on a USB-6363 to 1000 Hz 2 channels analog samples.  Everything works until I have started to increase the number of samples to read only once in DAQmxReadAnalogF64().

  I have set up the buffer in DAQmxCfgSampClkTiming() like twice the amount of samples, I want to read at some point.

  Up to about 8000 samples (128 000 bytes: sizeof (double) x 8000 x 2ch) it works and read call returns without delay once all about 8 seconds.  Increasing the number of samples other than that, I can no longer read the data (the DAQmxReadAnalogF64() always holler times).

  Question: am I running in a limit on the maximum number of samples that can be read or buffered... maybe a DMA limit any?  What determines how big you can make the buffer in DAQmxCfgSampClkTiming()?

  Maybe it's not obvious, according to the documentation, but if you look at the output value of the parameter samples per channel function DAQmxReadAnalogF64 reading, you'll see that when it times out, he reads what was available when it has expired. So if you're always calling this function, and your timeout value is too short, then you'll always be timeout, but you will always catch all samples. You can view this as the function will return when the buffer is full, or the timeout is reached. That's why we have provided an exit indicating the number of samples read.

  As a general rule, ask not read like this with DAQmx. I would recommend registering a callback for EveryNSamples (there is an example that's bundled with the CVI on how to do this), or by specifying a longer period than what it will take to gather real that many samples (in your case, 8000 samples at 1 kHz would be > 8 seconds). The main problem with the polling stations with a short time-out is that you should ignore errors that is not recommended.

• Signature custom for the maximum number of connections

  Hi, is there a signature to check the maximum number of connection to a host attacker to open a port to the victim? or should I make a costom for this signature?

  Hello

  You certainly can do it on the IP addresses, follow these steps in making a signature Atomic-ip looking for a tcp packet with only the SYN flag set on port 443 to the destination. You would then add a number of events for the number of connections you need. According to the site however this will flood the channel alarm with alerts, because traffic going out etc it will trigger. Of course, this can also be problematic with NAT.

  I don't know one of the guys ASA on these forums could give an answer better than me with regard to the configuration of the SAA.

  I understand they'RE a dynamic IP filtering or something that can be used to do this, although I've never configured myself.

  Thank you

  Neil

• Facing the question with the Maximum number of connections Timesten

  Hello

  In my project, I need to increase the maximum number of connections that timesten offers me. So, I changed the setting of the nucleus as shown below in the file/etc/sysctl.conf.

  kernel.SEM = 655 670720 128 1024

  The intention here is to get 500 connections max. But even after this setting too, I get only 477 connections. I don't understand why this is happening. Someone help me understand what is happening here.

  In above configuration, my hypothesis is that 155 semaphores are reserved for internal use of timesten and remaining 500 will be available for me, but this isn't the case. Please, help me in this aspect to understand why I get only 477 connections instead of 500 connections.

  Quick help is very appreciated

  Thank you

  Agnes

  Hi Agnes,.

  Thanks for the release of ttStatus. He explains what is happening and confirms my suspicions (second).

  The setting of the 'Connections' in the DSN attribute defines the limit superior on user connections; that is, connections by applications and tools such as ttIsql, ttMigrate etc etc. There is also the concept of connections 'system' (subdaemon, replication agent, agent of cache etc) that do not count against the total "Connections."

  In your case, the database is in fact properly configured for a maximum of 500 user connections. However, as you can see on the first ttStatus, you already have 23 application direct mode of 4 different connections methods of Java (which leaves the available user 477 connections). I of course have no idea what these applications are but probably your. This means that you are able to open additional connections a 477 application before arriving to the configured limit of 500. And that's exactly what we see; When you run your test application (what happens to connect via client/server), it reached 477 connections and then impossible to create more. As expected.

  Therefore, to allow connections you must:

  1. stop the database (replace ramPoilicy by manual (or inUse), stop all applications, stop the replication agent, unload from memory if the policy is manual)

  2. change the value for connections in the attributes of the DSN to a higher value (perhaps 600) - also, you need to make sure that OS semaphores are high enough to allow this number of connections.

  3. load the database back in memory, start the replication agent, starting applications.

  A a tied note, use of ramPolicy 'always' is not encouraged. In addition to the scenarios 'manual' is a better choice. We can "always" deprecated in a future release.

  Chris

• What is the maximum number of data warehouses in a system of Vcenter?

  What is the maximum number of data warehouses in a system of Vcenter?

  I had a look at highs of configuration in http://www.VMware.com/PDF/vSphere4/R40/vsp_40_config_max.PDF , he lists100 in the section of SMI-S

  SMI-S section list max number of ESX host as 100, although it is 300 in the maximum of vcenter server. Should I look for in the section of SMI-S?

  Only if you plan to use SMI - if she does not go with the maximum rates for vCenter - and you are correct to look at the number of hosts since it is the ESX hosts that communicate to the SAN not vCenter-

• "Failed to set the maximum number of files to open."

  This is the message I get when I open adobe illustrator and then it closes just, what do I do?

  I'm on a Macbook pro

  Error at launch. Unable to set the maximum number of files... | CS6 | Mac OS

  Mylenium

• Version 2 (9.2) - the maximum number of characters allowed per line is 32767 really?

  Hi all,
  
  The maximum number of characters allowed per line is 32767 really?
  
  The [Oracle documentation | http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96612/u_file2.htm#1002215] specify that the maximum size of a row of utl_file is 32767octets, but only accepts the 32766.
  
  If I try to include a line with 32767octets, the following error occurs:
  + "ORA-29285: error writing the file." + "
  
  Philips

  What new line character at the end.?

  max_linesize - the maximum number of characters per line, including the newline character, for this file. Minimum 1, maximum is 32767

• XE has a limit on the maximum number of processes?

  I just got a...
  
  ORA-00020: maximum number of processes (%s) exceeded
  
  My XE instance.
  
  I don't remember any mention of a limit on the number of processes in [the 10g Guide family produces | http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf].
  
  Is limited and if yes what is it?

  Hello

  It is a parameter that defines the maximum number of process 'PROCESS '. This is a global setting for all versions, you will need to change that in order to solve the problem.

  In the case of XE, a restriction on the mind in the process is the maximum amount of RAM that should not exceed 1 gigabyte.