OBIEE 11 g url hyperlink in report

Similar Questions

• How to call a PL/SQL for a hyperlink column report procedure

  Hallo!
  
  Normally, a value of column in a report, a link takes you to a page in your application or to another URL.
  And you can send the value of this cell to the calling page.
  
  I want that oracle runs a procedure with the values as in parameters, if I click on this hyperlink.
  
  Should I call a dummy page and define this procedure in the header of this page, or leave it otherwise?
  
  Can give you an example to my?
  
  Thank you very much!
  
  Gerhard

  It is a case of use of an application process.

• OBIEE 11.1.1.7 have reported "no data found" on data table columns

  Creates a data source jdbc using the 'Manage the Sources of private data' button, then a model of data using this data source and some sql codes.  Sample recorded data.  Trying to create reports OBIEE, but when I drag the columns on the data model, they appear in the table of data as any data found: / COLUMN_PATH

  When I try to run reports, they end up error, does not display any data.

  If I use BI Publisher reports on this data model, those that work very well.

  Any ideas on what's going on?

  Hello

  'Manage private Data Sources' = BI Publisher

  "data model" = BI Publisher

  OBIEE reports on BI Publisher data model? Impossible!

  I can't imagine even where you have found a way to create an analysis using a BI Publisher data model as a source.

  BI Publisher reports against BI Publisher data model works very well = this is the expected behavior.

  What/where/how do you do your analysis OBIEE?

• Problem with download of columns of hyperlink in reports!

  version: 4.1.0
  
  Hello
  
  I have an Apex interactive report that has two columns of hyperlink. which, once clicked on in the application opens another application. Which works very well.
  
  However, when we try to download this report in any format like csv etc using the download option in interactive reports, it shows any hyperlink in the CSV instead of the value of the column. Any suggestions on how to fix this? These columns are of type "Type of report Standard" However, I did not use the report binding attributes. I used directly in sql, hyerplink in the select report
  
  any suggestions?
  
  Thank you
  Ryan
  
  Published by: ryansun on January 22, 2013 21:46

  I don't think you can, I had the same problems with the sorting of the column. I did add another column with just the value and no link.

• OBIEE 11 g - URL to the document helps custom

  Hi, on a dashboard OBIEE, I would add a URL for the end-users click on dashboard page specific help. This Web page contains descriptions of the page where the links go, how to use the page effectively, etc.. I intend on creating these pages using Microsoft word and save as HTML documents.
  
  What OBIEE records would save I have these documents in, and what would be the format of the URL to open? I'm not good (at all) with WLS, so simple tutorials would be very useful.
  
  Thank you!
  Scott

  Hello

  Just upload your Word, excel, pdf, txt, etc. in webcatalogs (catalog of Download Manager - via presentation services then)

  Try it you're url like this:
  http://server-name:9704/Analytics/saw.dll?downloadFile&path=%2Fshared%2FArchive%2F23.txt

  mine is the job file that I called like that... below see url

  http://IP address:9704/analytics/saw.dll?downloadFile&path=%2FShared%2FDOC%2Fldap.txt

  and for the excel file

  http://IP address:9704/analytics/saw.dll?downloadFile&path=%2FShared%2FDOC%2Fstatic.xls

  Note:

  If any sapce b & w the path of the folder to use %20 in the url of tha
  If / in the path use % 2F in this 100% URL it will work

  For more information, see my blog
  http://obieeelegant.blogspot.SG/2011/09/uploading-pdfwordimage-file-into.html

  Note: If you want to share personal in obiee11g web link can also be simply reference
  http://docs.Oracle.com/CD/E23943_01/bi.1111/e10541/answersconfigset.htm#BIESG3738

  Thank you
  Deva

• Problem of InDesign CS6 URL hyperlink (8.0)

  When you create a hyperlink to a URL with a '? ' or '&' InDesign converts these "3F" or "% 26" which breaks the link. Is there a work around so my links not working?

  Check this link, may help.

  http://forums.Adobe.com/message/4463342

• Newline being added at the end of URL hyperlinks

  I have a list of hundreds of URLS that are generated on an Excel worksheet that my colleague has added as hyperlinks to the picture frames in InDesign CS5.

  Add them as a URL link, he leaves the box "shared the destination of the hyperlink" checked so they were automatically converted to links of Destination shared on creation.

  I exported the INDD file to SWF format, all hyperlinks worked fine once that I've tested on a live server. However, when I exported the same INDD document in a document of (Interactive) PDF the same links did not work. The links show as it should in the PDF, ending with "pagename.aspx", but once you open the link in any browser there a hexadecimal cart on the end, "pagename.aspx%0D", that invalidates the URL.

  I tried all combinations of the creation of a hypertext link in InDesign; URL, shared, shared the box checked and unchecked, there is no dofference, 0% D was always on the end.

  I went on the symbols of Excel controls, nothing appeared, although I am a novice in Excel.

  I copied and pasted the same URL of Excel directly in a block of text into InDesign, it showed no carriage don't return symbol, and nothing shows anywhere else there is nothing hiding on the end of the URL.

  Today I edited a hyperlink on the same document, and re-exported to SWF, now I'm having the same problem with this particular link changed, regardless of what type of hyperlink I have change, now both Flash and Acrobat!

  Like most of the bugs I encountered, InDesign turns out to be the culprit, and the new features related web never seem to work the way they claim.

  I have found no such evidence on Google to someone else having a similar problem.

  Please help, thanks.

  I don't think that's the problem. I believe that shared destination that url always appear as hyperlinkURLDestinations.

  Try adding

  $.writeln(hls[i].destinationURL);
  

  before the function if() to print a line to the console for each URL ESTK, he meets.

  Oh, wait! Ha ha ha. After a further inspection, I see the problem... Please delete the exclamation mark (!) at the beginning of the if() function...

  The script that I modified tested for the ABSENCE of something before you do the replacement. But it's the opposite here, where you test the presence. "" "!" means "not." sigh...

  Sorry about Feng...

• Change number of url hyperlinks.

  Hi all.

  I worked with InDesign CS3 to convert a catalog format iPDF for web distribution. It is through me the document page by page of hyperlinks between each program in the catalogue to the corresponding url. Recently, I was informed that all these hyperlinks must be modified by the addition of a few characters at the end of each url. It would not be a problem, but there are a few thousand links that would need to be updated.

  This brings me to my question: is there an easy way to change/modify several hyperlinks in an InDesign document or alternatively a way I could do that same task using Adobe Acrobat Professional 7.10?

  Thanks in advance.

  Ah, this last night a failure.

  Save the following in your user Scripts folder under "amendHyperlinks.jsx" javascript code and double-click it to run it. It adds the string number to each hyperlink in the active document.

  I do not have a document with many different types of hyperlinks - ID takes to load several - but I think it should work on "http:" models only. (That is, no guarantees.) Record before the race, check later.)

  for (a=0; a		   

• Prevent the target url in a report interactive opening in iFrame

  Hello
  
  I displays several IRs on a page using the iframe. For IR which is displayed in the iframe, I have a column link to a url in the application. When I click on the link in the column, the url opens in the iframe. How can get the url to go to the desired page, but not in the framework?
  
  Advice, other posts, etc is appreciated!
  
  Thank you
  
  Keisha

  Hi Keisha,

  I recently used the stackoverflow solution [url http://stackoverflow.com/questions/1037839/how-to-force-link-from-iframe-to-be-opened-in-the-parent-window] and it worked for me.

  There are two or three messages {message: id = 4150977} and {message id: = 6358290} in the forum but I didn't not try.

  Rose

• OBIEE 11 g URL does not

  Hello world
  
  
  I had a problem about my presentation services
  
  they are reverse running and all opmnctl files are all alive, but my url does not work
  http://VAMSHI-PC:7001 / analytics or any other em, console etc.
  I'm waiting like 15 min and I tried the work force url
  
  I tried updating the GUID in NQSconfig and bodies but work force...
  
  can someone help me with his...
  
  
  Thank you all

  This means that the services are not running. Yes, this can cause this problem. Make sure you enter the right credentials and check everything is in place and works very well. I think that your weblogic does not (the managed server, server admin), once they are on the rise and then launched, you can access the em and console weblogic and the em, you can start the BI services.

  It will be useful.

  Thank you
  RM

• OBIEE 11 G Auto delivery of reports

  Hello
  
  We charge a detailed report to the dashboard on a monthly basis, how to set up, so the report is automatically downloaded in Excel format and sent by e-mail only to the E-mail-nicks 5? Is it possible and if it is please let me know how to do it.
  
  Thanks for your time and your help.

  Have you looked at using Agents?

  http://docs.Oracle.com/CD/E14571_01/bi.1111/e10544/delivers.htm#i1060405

  .. or rupture of the editor?

  http://docs.Oracle.com/CD/E14571_01/bi.1111/e13881/T527073T527079.htm#gen_props
  http://docs.Oracle.com/CD/E14571_01/bi.1111/e13881/T527073T555155.htm#enableburst

• Devices to OBIEE (highlighting the data in the report)

  Hi all
  
  
  I'm basically a guy of Business Objects. I have a doubt, BO that we have only one option like "Devices" to highlight data.
  
  
  Ex: If suppose I want to display the data for the year 2009 in red color and data for 2008 in yellow in this case we will use devices in BO.
  
  
  Is there an option like this in OBIEE. Please someone help me.
  
  
  Thanks in advance
  REDA

  Hi reda,.

  You can use conditional formaating in OBIEE to highlight.

  Kind regards
  Swati

• OBIEE 11 g: odd error in report ORA-00942: table or view does not exist

  Hi gurus,

  I get the following error if I pull one or more columns in a table of facts

  Error details

  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle error code: 942, message: ORA-00942: table or view does not exist to the call of the OCIStmtExecute OIC. [nQSError: 17010] Prepare the SQL statement failed. (HY000)

  SQL published: SELECT 0 s_0, 'XXXXXX '. "" "" Fact_FCT_REG_XXXXXXX_XXXXXX '. "" S_1 N_ACCT_BALANCE""XXXXXX"FETCH FIRST 4000001 LINES ONLY
  

  Is the weird part, when I take the physical sql and run it against the same user account. It is fetching result. He also works in a different environment, but throwing error in our test environment, both environments are well established for a long time to return, and many projects are developed by many different groups.

  I really need expertise help to break this question. Given that I do not get no idea why his mistake to throw into the application layer?

  Any help will be much appreciated.

  Thanks in advance

  Concerning

  Nathalie

  Save nqquery.log which connection pool is used to send the query to the DB. Then check the configuration of the Connection Pool to see what user credentials are used to connect to the database, to which database (DSN), and if the table owner prefix is added to the SQL.

  ORA-00942 can often be due to the existing table, but the user trying to access him confer no rights. Rather than say 'no permission', Oracle will say 'does not exist.

• Add the custom user field / Module URL + 1 case report

  Hello

  I'm trying to get this BC online form to work.

  I have a content module support and this is a request for information form which can be seen here

  http://www.eco-cabins.com.au/information-request?cabin=1%20Room%20with%20No%20Bath % 20Quee % 20Bed % 20and % 20Queen % 20Bunker % 20Bed n

  As you can see, the {module_url, cabin} works well 1 room without bathroom, Queen bed and one bed Queen Size Bunker

  on the page but is not his way to the record of the case.

  This is the HTML code: http://pastebin.com/HVmRNpNm

  When someone enters a case the cabin field ends up being empty as you can see in the following image. I would like to display what they are on the page. For example: 1 room with no bath, Queen bed and a Queen-size Bunker bed

  

  Essentially, I would like to identify what page they are on to identify what cabin they are curious.

  Any help would be appreciated. I had a look to the tutorials and videos but still questions. Thank you

  Thank you, the information is displayed in the case... However,.

  It appears on the page of people with a request for information:

  That's what I used:

  Too bad. I fixed it with

  {module_url, cabin}

• Report of 2 different areas of 2 cubesAWM in obiee 11g

  Can we create a report by using two different disciplines that are created in two different cubes OBIEE administration tool in the same RPD?

  From the point of view report, OBIEE allows you to create a report of two areas.

  But being the OLAP source data, a better approach will be to "bring together" the cubes in AWM using calculated measures.

  Lets say a dimensionality DIM1, DIM2, DIM3, DIM4 CUBE1
  and CUBE2 has dimensionality DIM1, DIM2, DIM5, 6

  Create a new cube (lets call it RPT_CUBE) dimensionality DIM1, DIM2, DIM3, DIM4, DIM5, 6
  This cube will have all the STORED measures.
  It will only have calculated the measures which are necessary for the declaration.

  In OBIEE, you should import (then use) only RPT_CUBE. No need to expose and use CUBE1, CUBE2 OBIEE.

  It is one of the best practices for OBIEE - OLAP reports.

  .