Object moving between identical keyframes

Similar Questions

• Moving between identical keyframes

  Greetings,

  I'm keyframing position, only the parameter Y and get the oscillation between the identical key frames. See the green line in this screenshot. What happens here?

  Thank you

  -Mike

  you check the Bézier handles as is usually the case. Set your spatial interpolation of both of these on linear keyframes. more info on here:

• Object moving between tabs in very low resolution results?

  Hello

  I use Illustrator CS5

  When I move an object to a new tab (drag / move), the end result is very low resolution or distorted picture?

  Concerning

  1-2-5,

  What happens if you uncheck snap to grid of pixels (for both new and existing objects) in the transformation of the receiving document palette/Panel?

• Why do I get this message when I try to return to the previous page? "object moved here."

  It's so boring. I use ancestry.com a lot and after I watch a census or a person on ancestry.com, I try to use the left arrow to return to the page that I started on the screen turns white and it says "object moved here." "Here" is a link, but it does not work for me back to the page I want. I have to use the arrow back several times and sometimes it works and sometimes it doesn't, so I lift all over again. It's so boring!

  It's probably a problem with the site and you will have to contact them and ask them to fix it. But a link to a public page where it happens and allows us to reproduce the problem can be useful.

• Parameters of dual portable computer monitor reset when turned off, moving between States connected / disconnected

  I have a laptop that I put in place two hardware profiles for the specifications below.  One is anchored (work) and the other is in stand-alone mode (home).  I put my deskstop settings monitor extended with the laptop as main display when it is docked and the external monitor to the main when undocked view, switch off and moving between the dock and undocked States, my monitor preferences resume their single monitor with the main display as the LCD screen of the laptop.

  I would like to know if there is a way, either with a batch file, script VBS,... to set these parameters to display by running of the said script.  The video card is an Intel HD Graphics 3000 graphics card.  Sorry, I don't have the info exact chipset.  I have set up 2 separate profiles in the application for the video card utility but only makes the manual setting of my display preferences, it does not automatically value them when moving between States anchored and released.

  Any information is greatly appreciated.

  OS: Windows XP SP3

  Laptop: Lenovo T20s

  Graphics card: Intel HD Graphics 3000

  Monitor the work: Viewsonic VG1932wm-LED

  Home monitor: Acer LCD monitor

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum Technet and MSDN. You can follow the link to your question:

  For the VBS script: Forum of Visual Studio. (MSDN)

  For batch scripts: Windows 7 User Interface. (TechNet Windows 7 IT Pro Forums)

  Hope the information is useful.

• Object moved here - error message when you try to connect to the live account.

  I have Vista Home premium. When I try to log in my account online, I get a message saying: "Object moved to here" and I do not get the sign in page. The error message appears for two seconds and disappears. Then the screen become white. I contacted the phone support and they suggested the higher post my question here. Any suggestions? Thank you in advance.

  Hello

  The question you have posted is related to Windows Live and would be better suited to Windows Live help community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• Could not get the sign in page - error message "object moved here."

  I am unable to get the sign in page to connect to my live account. I get the message "Object moved to here" and Microsoft Live Hotmail was not able to complete this form - Contact Microsoft

  Hello

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• Because between two keyframes with the same position, there is movement?

  Because between two keyframes with the same position, there is movement?

  This would be due to the influence or speed?

  Quick glance:

  1. image: 'x' is 384px

  

  2 image: 'x' is 387px

  

  3. picture: 'x' is 384px

  

  Keyframes to which I refer are selected in the middle.

  

  There is a change in the balance between two key frames that are in the same position, without keyframes between them.

  FAQ: Why my layer (camera) moves backward between the keyframes value equal?

• Cannot migrate between identical hosts in the same cluster - CPUID level 0 x 1 'ecx' inconsistency

  I have problems of migration of virtual machines between hosts that are identical. They are the new BL 6 490 HP servers with a pair of processors x 5570 @ 2.93 Ghz and I activated the "Intel Xeon 45nm Core 2" EVC mode, there is also two other cluster hosts (HP BL480 G1 with a pair of processors E5430 @ 2 .66GHz).

  I ESX4, vCenter4 and all the latest firmware on all devices.

  When I try to migrate an identical to another or to other hosts host machines, I get the following error;

  Host CPU is not compatible with the requirements of the virtual machine to CPUID level 0 x 1 'ecx' register

  Bits of the host: 0000:0000:0000:0000:0010:0010:0000:0001

  Required: 1000:0000:0000:000 x: xxx0:0x1x:xxx0:x 001

  Inconsistency detected for these features:

  • General incompatibilities; see section 1993 of possible solutions.

  I have consulted the Article KB http://kb.vmware.com/kb/1993 and the document referred to Sub http://kb.vmware.com/kb/1008315

  All affected machines are hardware VM 7, the last VMTools are installed, have not RDM or nonstandard hardware, there is no floppy disk or CD drive mapped drive

  I tried to change such CPUID mask specified in the document 1008315, but this did not help. I also tried to change the mask of CPUID for ecx to be 0-

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  and that did not help.

  I turned off a VM to ensure that he had picked up the CVS settings. I am able to vMotion, virtual machine when it is off, but this is not enough as we have several "stuck" on the same host machine and cannot be moved by the DRS or manually.

  Virtual machines are Windows 2003 (R2, SP2, x 32). worked well before vMotion on all hosts. Other identical machines from the same model are fast vMotioning very well, and when we were on ESX 3.5u2 wasn't a problem.

  Can someone advise me on how I can diagnose and fix this problem?

  I had the same problem after migrating from ESX 3.5 to V4.0 with almost the same HW-Configuration you have. (BL490c and BL480c). But in my environment, the article you mentioned has brought the solution:

  To manually remove the CPUID masks using the VI Client:

  1 power off the virtual machine.

  2 - Click on the VM, then click on change settings.

  3. click on the Options tab.

  4. Select CPUID mask under Advanced.

  5. click on advanced.

  6. click Reset all to default.

  7. click on OK.

  8. click on OK.

  9. start the virtual machine and migrate.

  Have you actually tried it? The default mask is OK, there is no problem with it in your environment, as I have said already, I have the same hardware as you.

  Paul

• What is the best way to show 1000 objects moving in a field?

  Hello. I'm trying to JavaFX 2.0 and higher. I want to create 1000 objects (because now they can be rectangles) and move them randomly (for now). What is the best way to do this? Do I have to create an initial keyframe for each object? I was watching the demo of BrickBreaker. Is all that I need? I'm looking for a simple example. For example: ColorfulCirclesSample. Basically, what I want to do is create 1000 rectangles with random attributes including a vector (direction and speed) and show them using JavaFX 2.x.
  
  Thanks in advance.
  
  ServandoC

  Not that this is the best way, but it's an example, you can try:

  import java.util.Random;
  import javafx.animation.*;
  import javafx.application.Application;
  import javafx.event.*;
  import javafx.scene.*;
  import javafx.scene.image.*;
  import javafx.scene.input.KeyEvent;
  import javafx.scene.paint.Color;
  import javafx.scene.transform.Rotate;
  import javafx.stage.Screen;
  import javafx.stage.Stage;
  import javafx.util.Duration;
  
  // animates a 1000 objects (klingons) moving around the scene at random directions and velocity.
  public class ObjectsInMotion extends Application {
    private static Random random = new Random(42);
    private static final int    N_OBJECTS   = 1000;
    private static final int    OBJECT_SIZE = 20;
    private static final Image  KLINGON = new Image("http://icons.mysitemyway.com/wp-content/gallery/green-jelly-icons-transport-travel/038998-green-jelly-icon-transport-travel-star-trek-sc43.png", OBJECT_SIZE, OBJECT_SIZE, true, true);
    public static void main(String[] args) { launch(args); }
    @Override public void start(final Stage stage) throws Exception {
      // initialize the stage to fill the screen with klingons.
      stage.setTitle("Starboard bow");
      stage.setFullScreen(true);
      final double screenWidth    = Screen.getPrimary().getBounds().getWidth();
      final double screenHeight   = Screen.getPrimary().getBounds().getHeight();
      final Group objects = new Group(constructObjects(N_OBJECTS, OBJECT_SIZE, (int) screenWidth, (int) screenHeight));
      stage.setScene(new Scene(objects, screenWidth, screenHeight, Color.MIDNIGHTBLUE.darker().darker().darker()));
      stage.show();
  
      // press any key to exit the program.
      stage.getScene().setOnKeyTyped(new EventHandler() {
        @Override public void handle(KeyEvent event) {
          stage.close();
        }
      });
  
      // move the klingons around according to their motion vectors.
      final Timeline timeline = new Timeline(
        new KeyFrame(
          new Duration(1000/30), // update the klingon's motion 30 times a second.
          new EventHandler() {
            @Override public void handle(ActionEvent event) {
              for (Node n: objects.getChildren()) {
                // apply the motion vector for this object to determine the object's new location.
                MotionVector vector = (MotionVector) n.getUserData();
                double tx = n.getTranslateX() + vector.velocity * Math.cos(Math.toRadians(vector.angle));
                double ty = n.getTranslateY() + vector.velocity * Math.sin(Math.toRadians(vector.angle));
  
                // wrap the objects around when they fall off the starfield.
                if (tx + n.getLayoutX() > screenWidth)  tx -= screenWidth;
                if (tx + n.getLayoutX() < 0)            tx += screenWidth;
                if (ty + n.getLayoutY() > screenHeight) ty -= screenHeight;
                if (ty + n.getLayoutY() < 0)            ty += screenHeight;
  
                // update the object co-ordinates.
                n.setTranslateX(tx);
                n.setTranslateY(ty);
              }
            }
          }
        )
      );
      timeline.setRate(5);
      timeline.getCurrentRate();
      timeline.setCycleCount(Animation.INDEFINITE);
      timeline.play();
    }
  
    // construct an array of n objects of rectangular size spaced randomly within a field of width and height.
    private Node[] constructObjects(final int n, final int size, final int width, final int height) {
      Node[] nodes = new Node[n];
      for (int i = 0; i < n; i++) {
        ImageView node = new ImageView(KLINGON);
        node.setLayoutX(random.nextInt(width  - size / 2));
        node.setLayoutY(random.nextInt(height - size / 2));
        MotionVector vector = new MotionVector();
        node.setUserData(vector);
        // rotate the klingon to align with the motion vector accounting for the klingon image initially pointing south-west.
        node.getTransforms().add(new Rotate(vector.angle + 225, node.getFitWidth() / 2, node.getFitHeight() / 2));
        nodes[i] = node;
      }
  
      return nodes;
    }
  
    // polar co-ordinates of a motion vector.
    class MotionVector {
      final double velocity = random.nextDouble();
      final double angle    = random.nextDouble() * 360;
    }
  }
  

• Value Alpha may change between two keyframes?

  Hello

  Flash CS5.

  I have a splash of MovieClip Alpha 21% value in a keyframe and a few seconds later along its layer in the timeline another KF with him the 1% value

  I run the film and he remains 21 percent until it reaches the second KF when it suddenly becomes 1%

  I click with the right button between the two KFs and choose classic tween, still no difference.

  That undo and try for a motion tween, ok the con at the prompt of symbols. still no joy.

  Try for a classic Tween with...

  I see no better, a merge option so that alter to Alpha for the two MCs in the KFs.

  How can I get the alpha value to change continuously and gradually from 21% to 1% across lets say 3 dry, while 1 sec after its 14% then after two seconds its 7% etc.

  The MC itself is of a duration of 5 images, each image is a KF with whiteSpatter on a transparent basis as a .png whose size grows with each KF. If a growing number splashing effect.

  I need this fade over a period of say 3 seconds in my film scene1. I travel to a single constant value alpha 21% on my scene, but I need to change during the move to become 1% Alpha.

  Envirographics

  When tween on the timeline, you can have only one involved object and this object must be the same object from the first to the last keyframe.

• High level Page object sharing between lower-level components

  I have a QML file that uses a layout similar to the following:

  TabbedPane {
  
      attachedObjects: [
          Page {
              id: resultPage
              Container {
                  Label { text: "This is the result page!" }
              }
              ...
              ...
          },
          ...
      ]
  
      Tab {
          NavigationPane {
              ...
              ...
  
              Button {
                  onClicked {
                      // Change something on resultPage
                      push(resultPage);
                  }
              }
          }
      }
  
      Tab {
          NavigationPane {
              ...
              ...
  
              Button {
                  onClicked {
                      // Change something on resultPage
                      push(resultPage);
                  }
              }
          }
      }
  
  }
  

  I want to be able to make use of a shared Page (resultPage upstairs) between two different NavigationPanes. When I try and push the resultPage on the current NavigationPane, it nothing happens. If I move the object resultPage in table of a particular NavigationPane attachedObjects, pushing this page on the NavPane works very well.

  What is the best way to share a common QML component between two different NavigationPanes? If I had to define resultPage in an external QML file and I had to load into each NavigationPane, would I be able to change things (i.e. the label resultPage) before pushing on the NAV?

  Thank you

  Yes, put resultPage in file separate qml and push through ComponentDefinition (https://developer.blackberry.com/native/reference/cascades/bb__cascades__qmlcomponentdefinition.html...

• Can RuntimeStore store share some objects customed between applications?

  Hello

  I know that one application, we can use RuntimeStore to share information, including objects customed.

  What happens if sharing objects across applicatioins customed?

  Here is my scenario:

  1. two applications, app1 and app2.

  2. start app1. He puts some customed objects in RuntimeStore.

  3. run app2. It attempts to retrieve the objects of app1.

  I found this app2 cannot convert object type in type customed as defined in app1, but can convert to some standard objects BB, for example the screen.

  So is it possible to share objects between applications customed?

  You have a library that share the two applications?

  If you then set the store TIME object in the library. If you have not then you need create a library and create the class in the library for applications to use.

• shared object synchronized between threads/listeners

  I don't know if I go about it the correct way.  I'm hoping that someone could help with this situation. Here is basically what I want to do:

  Have a FIFO queue object that contains the data to send to a web application that can be accessed synchronously between threads/listeners.  Given that the coverage of the data can sometimes be slow or even non-existent, I need to wait for the cover, maybe using CoverageStatusListener that runs on a wire and will suspend/resume the thread on state change.  All this must happen without the need of Auditors threads to wait.

  For example:

  data coverage is non-existent

  ListenerA needs to send data, it places in the queue

  data coverage is restored.  Data queue

  ThreadB needs to send the data until the transmission is completed. We need the data in queue

  transmission of complete, passed down from queue data is removed from the queue

  During all this time, I need ThreadB data exist also in the queue object and not be lost when the data is complete and is removed from the queue.  I need ThreadB to continue treatment and do not wait until the transmission is completed.  I played a bit with display of threads that are cycled every five minutes or so if they could not pass successfully, but that logic is not feasible.  Say you are out of the coverage of the data for an hour or two, but you end up needing to pass 50 items.  You have 50 son sitting there waiting to pass.  Or a listener for each point that everyone is trying to send at the same time.  What happens if the device dies or is reset?  I looked at RuntimeStore, but that does not record the data and I don't know what happens when 2 wires need to add data to the queue at the same time.  PersistentStore will not be able to hold the data if/when it becomes too large.

  Here it is the pseudo-code.  I know that some things will probably not work.  Just trying to get down the basic logic.

  public class TestFoo extends Application {
    public static void main(String[] args) {
      TestFoo foo = new TestFoo();
      foo.enterEventDispatcher();
    }
  
    public TestFoo() {
      CoverageInfo.addListener(new CoverageListener());
      ThreadA threadA = new ThreadA();
      threadA.start();
      ThreadB threadB = new ThreadB();
      threadB.start();
    }
    public class ThreadA extends Thread {
      public ThreadA() {
      }
      public void run() {
        while (true) {
          //do stuff
  
          if (/*something */true ) {
  
          }
        }
      }
    }
  }
  

  public class HTTPThread extends Thread {
    private boolean suspended;
    private FIFOQueue queue;
    public HTTPThread() {
      setSuspended(false);
      /*
       * get queue from filesystem???
       * or create new queue if not there???
       * load into RuntimeStore???
      */
    }
    public void run() {
      while (true) {
        if (isSuspended()) {
          try {
            wait();
          } catch (InterruptedException e) {
          }
        }
        //fetch queue from RuntimeStore???
        if (queue.isEmpty()) {
          try {
            wait(); //can notify us when an object is added to the queue???
          } catch (InterruptedException e) {
          }
        }
  
        if (hasDataCoverage()) {
          Object obj = queue.getHead();
          boolean successful = false;
          if (obj instanceof MyObject1) {
            MyObject1 myObject1 = (MyObject1)obj;
            //send data based on MyObject1 structure;
            //set successful
          } else if (obj instanceof MyObject2) {
            MyObject2 myObject1 = (MyObject2)obj;
            //send data based on MyObject2 structure;
            //set successful
          } else {
            //not a valid object of mine for some reason
          }
          if (successful) {
            //get queue again from RuntimeStore???
            queue.removeHead();
            //return queue back to RuntimeStore???
          }
        }
      }
    }
    public synchronized void setSuspended(boolean suspended) {
      this.suspended = suspended;
    }
    public synchronized boolean isSuspended() {
      return this.suspended;
    }
  }
  

  public class CoverageListener implements CoverageStatusListener {
    //Only location this will be started so only one instance exists
    private HTTPThread httpThread;  
  
    public void coverageStatusChanged(int newCoverage) {
      if (!httpThread.isAlive()) {
        httpThread = new HTTPThread();
        httpThread.start();
      }
  
      if (newCoverage != CoverageInfo.COVERAGE_NONE) {
        if (httpThread.isSuspended())
          httpThread.setSuspended(false);
      } else {
        httpThread.setSuspended(true);
      }
      httpThread.notify();
    }
  
  }
  

  public class ThreadA extends Thread {
    public ThreadA() {
    }
    public void run() {
      while (true) {
        //do stuff
  
        if (/*something */true ) {
          //Somehow put data into the queue
        }
      }
    }
  }
  

  I think that there are a number of; habits that will help you design it - the producer/consumer and observer patterns come to mind.  I'm not a design guru so will not pretend even to help you work through this.  But all I can say is that models provide generally well thought out structures for the problems that.  I encourage you to read about them.  You might find these useful references:

  http://www.javacamp.org/designPattern/

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3023

  In general I'm not comfortable with your overall solution.  I would look at something like that

  (a) offer a 'service' to your users that collects the data to send.  There is no need to be a wire, it is just a method that they call and pass in the data.  These data are persisted.  This method 'Add' is owned by the transmission process and is the only visible part of the outside of the treatment.  This treatment should also begin sending wire (see b) if it is not executed.

  (b) have a thread that attempts to send the data.  You can launch this thread on changes in coverage if you want, but make sure that you can have a single run.  This thread should check coverage before attempting to send anything, and just end if there is no point of trying.

  (c) your submission Thread will get in situations where she send and does not receive a response from there is another error.  In this case I recommend the blocking of the Thread for a time and then try to send again.

  (d), I said in (a) that the add-in has been the only visible part of the outside of this treatment.  However you're better instrument your process so that users can find out if your thread is running, how much he sent, if the last transmission worked or not of data and so on.

  Treatment based on a vector of data to send.  Synchronize on this vector before changing.  In the "add step (a), add an element to the vector."  In processing step (b) delete the first item when you have treated.

  There is a problem with this design in that there may be overlap if the sending thread terminate because it has nothing to do and add treatment add something and does not start the Thread because it is actually running.  You must code carefully around that.

  I hope this helps.

• BlackBerry Smartphones calendar time change when moving between time zones

  I travel between mountain and Central time zones. When I get the appointment I specify the time zone that the appointment should occur. When I go back to the other time zone and change the time of BB to the correct area, all appointments move ahead or back one hour. Is there some sort to have well positioned BB time and appointments to stay at the right time without moving forward or backward and time?

  It's normal.  When you change the time zone on the device calendar entries will change, too.  If you set a date on the calendar for the hour 17:00 and you change time zones in Central time that entry calendar will increase to 18:00 18:00 central is 17:00 mountain.  The calendar shows always real-time.