Similar Questions

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

• Analyze tables after creating indexes

  Hi all
  
  I created new clues on the production environment, we must analyze tables after creating indexes. Why and what analysis do?
  
  Thanks for the help.
  

  Select * from V$version;
  
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  PL/SQL Release 10.2.0.4.0 - Production
  "CORE     10.2.0.4.0     Production"
  TNS for HPUX: Version 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production

  There are so many different options and you'll certainly want to tweak your stats based on your system.
  The best thing to do is to read about dbms_stats:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14211/stats.htm#PFGRF30102
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_stats.htm#CIHEHDFB

  Here are a few examples to give you an idea of what they look like and how to perform:

  BEGIN
    DBMS_STATS.GATHER_TABLE_STATS(OWNNAME          => 'schema_name',
                                  TABNAME          => 'table_name',
                                  ESTIMATE_PERCENT => DBMS_STATS.AUTO_SAMPLE_SIZE, --> For really big tables oracle can just do a specific percent
                                  METHOD_OPT       => 'for all columns size 1', --> Defines Histograms, size one disables histograms
                                  DEGREE           => 12, --> The degree of parallelism so you'll see 12 parallel threads gathering stats
                                  CASCADE          => TRUE); --> gather stats on the table's indexes also
  END; 
  
  BEGIN
    DBMS_STATS.GATHER_INDEX_STATS(OWNNAME          => 'schema_name',
                                  INDNAME          => 'index_name',
                                  ESTIMATE_PERCENT => 50,
                                  DEGREE           => 4);
  END; 
  

  You can also do

  DBMS_STATS.gather_schema_stats
  DBMS_STATS.gather_database_stats

  and much more...

  I really want to focus on the need to do your homework on them,
  read the docs I linked and adjust your statistical parameters to fit your db objects and how they are accessed/used.
  Having accurate and meaningful statistics are very important to the performance of the database.

• Error JavaScript prevents the table of contents, Index, search view

  I produced my RoboHelp HTML project webhelp and got an error javascript (this.maCom [...] (' is null or not an object) when you view the result. See the full error text below. So the table of contents, index and search are not displayed. We'll find the javascript error in the status bar of the browser that says "error on page". I found that if I saw the result of robohelp, the browser that launched shows the table of contents, index and search, but has a security warning about a restriction of running scripts or ActiveX controls. However, when I move the generated webhelp on my production server, the help doesn't have the security warning, but produces the error so that the table of contents, index and search do not show. I had done the same process to generate webhelp about 8 months ago but had no error whatsoever. In fact, this version is still in production and works very well.

  In my search for the problem, I found that it is the same error as message of the forum 4063663 (http://forums.adobe.com/message/4063663). I didn't have a second system with RoboHelp to be able to get other whphost.js, however, I have diff had the file generated with that found in template_stock and found only two different lines. These differences were only to replace a couple of variables with static text so I do not replace this file will solve any problem for me. That is the message of only forum I could find who addressed this issue.

  I was originally on RoboHelp 8.0.0 when I first encountered the problem, but has expanded and patched to version 8.0.2 and still had the same problem. I even created a new simple project. Once I moved the simple project on the production server, it also would display the table of contents, index and search.

  The strange thing is that only 8 months ago, I used the same process to generate webhelp without any errors (on 8.0.0). The only thing I can find is there is a Windows XP patch which affected the generation of webhelp. Furthermore, I also tried chrome and also produces the error.

  I don't know what is causing this problem or how to solve the problem. Anyone have any ideas?

  Versions:
  RoboHelp 8.0.2
  Windows XP
  IE 8.0.6001.18702CO
  Chrome 18.0.1025.168 m

  
  JavaScript error
  -------------------------
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0 .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729;. MS - RTC LM 8; InfoPath.2;. NET4.0C;. NET4.0E)
  Timestamp: Sun, may 2, 2012 16:32 UTC

  
  Message: Object EXPECTED
  Online: 344
  Char: 2
  Code: 0
  URI: http://server1/robohelp/whphost.js

  
  Message: 'this.maCom...' is null or not an object
  Online: 171
  Char: 3
  Code: 0
  URI: http://server1/robohelp/whphost.js
  --------------------------

  After further research and testing, I found the update of security for RoboHelp 8 and 9 (http://www.adobe.com/support/security/bulletins/apsb11-23.html) posted as an ad that I had not seen before. I used the feature updates of the product, but that said I was informed and did not include this update.

  Both javascript in this update files solve the problem. The table of contents, index and search now appear.

  Update:
  As I studied the problem further (when writing this reply), I found files that are newer than the latest security patches, I was aware of that. In addition, I discovered that my security organization decided to patch with APSB12-04 I don't know. This patch is why my 8.0.0 installation magically stop working. I see the announcement of the security, the bulletin was not all the required components for specific, that the patch can be applied to 8.0.1 and 8.0.2). (8.0.0, Adobe, please give more information on the ballots of so that organizations that deploy auto will be forced to find out what is running before the update. Information such as whether they apply to all versions of Robohelp 8 or simply a specific version. If APSB12-04 was supposed to apply to all versions of 8, then it did not work. In fact, he broke my installation of 8.0.0 for the generation of webhelp, but a later installation of 8.0.1 and 8.0.2. It seems that they have done a better job for APSB11-23. Maybe the security updates should be a kind of service pack that has a plant and a cancellation process. Right now, my security organization has replaced the files based on the specification in the security bulletin.

  I'll try to patch with APSB12-04 new since I've updated version 8.0.2 database to see if I still have the webhelp. If I can't view the table of contents, I have to take off once more and be 'in non-compliance."

• Not possible to store several fileReference object to the same table?

  Hi all

  I'm trying to store several fileReference object in a table. But whenever I have a new object each time push() artefacts which is already in the table gets set on the object later.

  I let the user selecting an image. Then I push the fileReference object selected in a table like my_array.push (FileReference (event.target));

  If I then executes a loop on 'my_array' to check he's glad I get the most recent pushed fileReference for each index object in the table.

  With an object pushed:

  1 Image1.jpg

  With two objects pushed:

  1 Image2.jpg

  2 Image2.jpg

  Anyone has any ideas on this?

  Thank you very much

  Hello

  Sorry for the delay.  You've probably discovered the answer to that now, but in case you do not have or someone else runs into this issue here is the code that should fix this:

  // Local Files
  private var fileList:Array = new Array();
  private var localFiles:FileReference = null; 
  
  private function browse(event:MouseEvent):void {
       localFiles = new FileReference();
       trace("[Browse] Using local files");
       localFiles.addEventListener(Event.SELECT, onLocalFilesSelected);
       localFiles.browse();
  }
  

  The problem is you have had one instance of localFiles, and while that you stored more than once in the table, when the reference has changed it performs all of the table.  Instead, I'm newing up a FileReference browse() service, so that we get a new each time.  I hope that makes sense.

  Chris

• Casting of object type to aid to more specific

  Hello

  I'm bit stuck in the legacies of the class in my current project. I implement a zero-coupling messaging architecture that uses variant tables to store objects to be cast to sample.

  The good news: it works in general, little we take a peek at some photos

  I tried the script of coulee before using an example that works as expected.

  

  Shows probe resulting:

  

  The Message of abstract [14] is cast to the more specific Message for the controller test [15], [9]

  Now, this implementation with the variants table, change things unfrotunately:

  

  The only thing that apparently changes is, as the class to be cast to a return value of a Subvi (actually reading the table variant) [12].

  As shown in the probe that the casting does not work this time... There is also no error on the terminal error.

  I have to admit, I'm quite confused... especially because in another class this exact methodiolgy works...

  Any thoughts?

  See you soon

  Oli

  Cast throws more specific to the type of object shown on the thread in the IDE, regardless of the type of the actual object passing along this thread (i.e. type of YARN and not DATA type).

  I bet that your wire to the Center terminal of the 'to more specific' is a son of the same type as the object you are trying to change but actually a more specific object.  The 'Cast to more specific"is a compiling decision, not a decision of execution. As such it takes the type of thread, not the object type for the casting.

  Look at the names on the left of your probes, they are all the same in the example below (all wires are nominally of the same type).  It's the onfo LV casting (assuming the names corresponding to the nominal type of the thread) not use content REAL of the wire.

  Shane.

  PS to make things clearer, give each hierarchy in your legacy a different aspect of wire.

• Copy a table with its index of Oracle 12 to another instance oracle 12

  Hello

  I m using 64 bit Win8

  I have a huge table T1 (about 200 million) on user storage space and its index is on different tablespaces on DB1

  I built an other empty DB2 with the same names of storage spaces. I d like copy the table T1 of DB1 with all its indexes in DB2 so that the table will in User tablespace and the index go to their corresponding storage spaces.

  Is it possible to do?

  Currently I T1 to export into a CSV file and re - import to DB2 and build all indexes manually.

  Concerning

  Hussien Sharaf

  1. What is the exact syntax to export and import a table with its index?

  You will need to use the "Table". An export of table mode is specified by the parameter TABLES. Mode table, only a specified set of tables, partitions, and their dependent objects are unloaded. See: https://docs.oracle.com/cloud/latest/db121/SUTIL/dp_export.htm#i1007514

  2 How can I import the indexes in one tablespace other than the table itself?

  You can only export the table first without the index by specifying the EXCLUSION clause in order to exclude from the index (see: https://docs.oracle.com/cloud/latest/db121/SUTIL/dp_export.htm#i1007829) and then manually create the index and specify the different tablespace when you create.

• How to add text/solid/shape at specific index?

  Hello, is it possible to add shape/text/solid to a specific index in a publication? As for example a publication has 5 layers and I want to add a solid to index 3 rather than at the beginning layers as it does by default. The definition of solid ID after I added it does not work, because as its readOnly.

  As much as I know there is no way to change the index while creating a layer.

  Look in >. Page.87, there are a 4 methods to meet your need once the layer is created.

  App.Project.Item (index). Layer (index) .moveToBeginning ();

  App.Project.Item (index). Layer (index) .moveToEnd ();

  App.Project.Item (index). Layer (index). MoveBefore (targetLayer); targetLayer is an AVLayer object, then you should try this way: targetLayer = app.project.activeItem.layer (index);

  App.Project.Item (index). Layer (index). MoveAfter (targetLayer);

  I almost forgot that the script can use app.executeCommand (app.findMenuCommandId ("shape layer")); to add a shape layer just above your selectedLayers. I don't remember, but maybe that this feature is supported after AE CS6

• Reference specifications index page

  I am trying to create an index of the object using the Index marker type (using unstructure FM 12). The output should look like this (the image below was created using the type of marker 'Topic'; I need to use "Index" because it is what generates in the ePub output):

  
  

  

  However, when I generate using the marker Index type, I lose the blue text and the chapter number before the page number. From what I can tell, FM is somehow inserting < $pagenum > in the reference specification index page, although I've specified in there it should be < hyperlink > < $chapnum > - < $pagenum > < Defalut Para fonts >.

  Any ideas how I can get it to stop inserting the < $pagenum > in the reference page?

  Check the names of paratag (i.e. compare what FM created with you). FM will only add new entries if it does not find those corresponding to the levels used for Index markers. The paratags should all end up in "IX" when you use the marker "Index".

• Dynamically set object to display a table of the ADF

  I need set dynamically the view object used by a table based on almost 100 different choices. By example, if you click on departments then use the DepartmentsView object for the table.
  
  What would be the best way to address the issue? I think I have to essentially dynamically bind the array to a display object, or run the query by program and update the table.
  
  I'm sure that others had to do something similar, so if there are resources available that address this specific approach if someone could provide a link? Otherwise if you could help me with the code for this and tell me where to go, who would be most appreciated.
  
  JDeveloper 11.1.2.0
  
  Thank you!
  
  Published by: 862567 on August 3, 2011 04:29

  Using Facelets? I just did a test and found that ADF dynamic array is not available (but ADF read-only dynamic Table is) in a Facelets page, but it is in a JSP page.

  John

• kindly tell how to use the unique value of a table with the index 0

  kindly tell how to use the unique value of a table with the index 0

  Hi
  
   
  
  Yep, use Index Array as Gerd says. Also, using the context help ( + h) and looking through the array palette will help you get an understanding of what each VI does.
  
   
  
  This is fundamental LabVIEW stuff, perhaps you'd be better spending some time going through the basics.
  
   
  
  -CC
  

• Error in ODI, ORA-01747: invalid column, table.column, or user.table.column specification

  ODI-1227: SrcSet0 (load) task fails on the source of ORACLE STAGING_YYY connection.

  Caused by: java.sql.SQLSyntaxErrorException: ORA-01747: invalid column, table.column, or user.table.column specification

  We get the above error whenever we run an ODI interface,
  This interface is straight forrwad a mapping update incremental IKM Oracle, although we have identified the problem but do not know how it could be fixed

  Source table that contains two columns that are generally identified as the key of DB

  NAME

  / / DESC

  the target too has the same columns. If we disable these mappings to columns from the Active maps the interface works very well, however, with the latter, it fails. We will not be able to change the name of the column in the target because it is a table of Oracle products and has several dependencies to the breast.

  Please suggest an alternative and also if our understanding is correct.

  Thanks in advance.

  Jay

  HI Jay

  change the column as DESC and put "DESC" in the name, and save it for all the source concerned target and remapping to remove the column from the interface

  Thank you

  P

• Error Type 2 SCD: ODI - 1228:ORA - 01747: invalid column, table.column, or user.table.column specification

  ODI error. When you try to import.

  Error Type 2 SCD: ODI - 1228:ORA - 01747: invalid column, table.column, or user.table.column specification

  It is a common question.

  Allow your SCD SCD table column properties if you do not select "crush on change."
  This property simply

  -Online CPC IKM goto => select ignore option error on update of existing lines.

• Selection of one-dimensional Array objects in a hash table

  Suppose I have a hash table with a list of names of virtual machine.  I also have a variable array containing objects of virtual machine and all of their properties.  I want to scroll the array variable and delete all virtual machine names that do not exist in the hash table.  How do I would accomplish this?

  Thank you

  If your table is called $inArray and your hash table is called $hashTab, you could do something like that

  $outArray = $inArray | %{

  If ($hashTab.ContainsKey ($_.)) VMName)) {}

  $_

  }

  }

  The selected objects will be $outArray table.

• Are there patches IE11 and Chrome for RoboHelp for Word 10? Table of contents, Index, and search do not work as expected in WebHelp...

  Question:

  Fixes IE11 and Chrome on the Adobe web site ask you to put their new files in RoboHTML templates_stock folder. However, I need these fixes for RoboHelp for Word. Is there a such difficulty?

  Background:

  
  

  I use 10 RoboHelp for Word, generating WebHelp.

  I try to solve the problems about the table of contents, Index, and search appears not not or not being not completely functional IE11 or Chrome, not including many of our customers use. I found a couple of workarounds that my boss doesn't like.

  • In IE11, if the end user adds the web site to the compatibility view list, they all appear and function correctly, but my boss is adamant about not wanting the end user having to do anything to solve the problem.
  • In Chrome, I can get a table of contents and a non-functional search to appear if the user turns off JavaScript for the site, but this solution also violates the lists see also in help. Again, made my boss wants to not that the end user to have to do.

  His solution is just to generate using pure HTML, but then the search won't work in IE11 or Chrome (I'm not sure about Firefox). I are based largely on the research, when I'm working on the product, so I really don't want to lose the search function.

  Help, please.

  Kind regards

  Jenn

  As I said in my reply to your message in the RoboHelp for Word forum, there is no patch for this.

  I can understand your not wanting to Manager end users will do anything and agree with him. However, the fixes for these issues in HTML HR are simply not available in RoboHelp for Word.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge