object tracking/attached to the slider?

Similar Questions

• How to create an Interactive Moving experience or object which reacts to the slider of the Viewer?

  Hello

  I started to create a site in muse and I try to create an object that will react to the slider of the Viewer.

  I have a fix Center, whole and other image that had to move with the movement of the cursor as in this tutorial: create a moving background/interactive object that reacts to the slider of the viewer

  I want to do of muse and do not know how to proceed,

  Thank you

  Hello

  It has no native function in Muse to achieve this. If you can get the code for this, you can add it to your site by using the function insert the HTML code.

  Kind regards

  Aish

• object attached to the CPP

  If you use the feature. destroy() to get rid of an RPC object, is possible to add this object to the attached objects of a container?

  Here's a quick overview of how I do it, (maybe made some mistakes of typo, but it's the idea)

  in qml

  IMPORT CustomApp 1.0

  see the documentation if you have not yet created it and saved an object

  objectName: "mainPage".

  attachedObjects:]
  {To support
  ID: _support
  }

  onCreationCompleted: {}
  _appUI.saveControlAddress (mainPage);  where mainPage would object to your control name

  c ++

  move the object or in fact any address as QString

  * this easier than trying to find object unless you go to the page you can find all the objects on the page othe

  void CustomApp::saveControlAddress(QObject *pageIn) {}
  Page = publication;
  }

  Create your object and attach to the control by using the appropriate method

• Captivate 8 - small gaps between objects and the end of the slide?

  Hello

  I have a selection of objects on a slide and have noticed that there is a very small gap (less than 0.1 seconds) between some of them and the end of the slide.  This applies only to certain objects. All objects are set to falter (via the timing tab) and the deficiencies mean they fade sometimes slightly different, which is really irritating.  This seems to happen even if I manually set the timings of the object (again via the timing tab) so that each object must be on the slide for exactly the right amount of time.

  Has anyone seen this problem before?  If so, is there a way to bypass?

  Thank you!

  

  

  I figured out, and now I feel very stupid!

  The problem with objects is not the tail was because I changed the zoom on the timeline, from 100 to about 80%.  Return to 100% causes the objects to align again.

  The problem with the objects fading out at the wrong time was not related and because I had accidentally changed the duration of the effect of 0.5 second to 0.1.

  Thanks for your help anyway!

• Drag & Drop - increasing the action in the action of the object area begin to run the slide

  In the slide drag and drog I use the Action object to a target object. I would like to increase the value of a user variable when the learner move the source properly object to the target object. Without this object Action, the blade was arrested after 1.5 s how you described. This is the correct way. But if the Action of the object has been used, the slide stop. So what do you think, is it a problem of understanding or is this an error in the program? Could you send me your appreciate the opinion? Cordially to Leobersdorf in Austria by Gerhard.

  

  Hello

  You will find the solution in my blog: advice & glide - Captivate blog

  The problem is that a simple gesture, like you use it for the action of the object, always free the read head. You will need to replace it with a tip or shared action standard. Same situation happens everywhere when you raise a simple action: Why choose Standard Simple action?-Captivate blog

• Fade out when object showing to the rest of the slide

  I noticed that when you define an object to display for the rest of a slide, the transition effect is still at the default value of fade in and out. This causes the image to falter at the last second half of the timeline. Is there a a way to define the items to not falter displayed for the rest of a slide without having to change the default values of each object or touch each those transitions?

  Looks like there is a preference I'm missing or the beginning of a great feature to add

  Thanks in advance

  David

  Make sure that what you're actually seeing is not only the effect of transition melted on the slide itself, and not the fadeout of the objects.

  Select the slide and look in the properties of his Transition.  If it is set to Fade, change in Transition No.

• Captivate 9, sensitive slides on a Mac and a PC publish the slides, timed objects (show/hid) do not shown in the final html5.

  I have some 9 Captivate, sensitive slides on a Mac and a PC.

  When I published the slides, timed objects (show/hide) not shown in the final html5.

  Some slides contain objects such as some graphics (png), the arrows and text boxes that have a period of delay or show that for a given time.

  They work within Captivate when I executed the chronology, but do not yet show in the published code. I tried several different browsers.

  Any idea why these objects do not appear?

  Thank you, I have yet seen that I didn't just look.  Once, he toured. Jim

• Receptive Slide height develops all the objects on the slide master background.

  Hey,.

  If I build a sensitive project and slides, I need to unlock the height of the slide in mobile mode on some slides to create a scrolling to display more content.

  When I adjust the height of the blade, it develops all the objects in the background of the slide (my header, title...). These elements are not merged.

  Is there anyway that I can adjust the height of the blade so that it is not developing all the objects on the slide, only the backdrop (i.e. the white canvas). I try to use a model of slides for content pages.

  Or is the only way around it to create a number of different slide masters with heights of slide?

  See you soon

  Hello

  I feel your pain. I struggled with this for a long time, but finally found a solution.

  If you want to extend the height of the blade, creating a scroll bar. But you want certain elements to stretch and others do not.

  
  

  Object to Extensible NOT / Static

  • Create in the Slide Master
  • Set the properties top and % Relative height.

  Stretch/dynamic objects

  • Create directly in slide film
  • Set the Top % Relative property
  • Set the Height property for % (not related).

  I recommend to create a slide film finalized and then duplicate this slide for all other instances.

  Let me know if it works.

• Using Captivate 8, is it possible to animate the movement of an object from the center of the slide upward?

  I have an object in the center of the slide.  The narration continues, I want the object to move up to the top of the slide, so that I can "fade in" a related object (new) just below.  How can I do this with 8 Captivate?  I tried to use the features of the effect and the trajectory, but there is no path back.

  You probably failed you can edit a path (not very easily, should be done by dragging). It is an old article, but still the same workflow:

  Trajectories and custom effects reuse - Captivate blog Edition

  Lilybiri

• Dynamic object does not appear at the time specified in the slide.

  @

  Here's my problem: when I insert a bubble in the slide, set it to appear after 5.0 seconds and the display for the rest of the slide, it does not appear at the specified time. HOWEVER, if I move the speech bubble to appear from the BEGINNING of the slide, then it pops up. I thought that maybe I needed to add an effect to make it work, so I chose the thought bubble, and then add an effect of "fly in" and set the time. It will not always appear at a specified time - that if I put it at the beginning of the slide.

  Here's my question: why the smart object (bubble) does not appear at a specific time, but it will appear if I put the time "appear after" at 0 seconds? I also have tried to move this on the timeline and it still shows only at the beginning of the slide.

  
  

  
  

  Thanks much for any help.

  Hello

  I notice that you have a couple of what appear to be objects Button. I have highlighted them in the image below:

  

  Click on each of them and look at their properties. Change the "Timing" the break after is more than 8 seconds.

  See you soon... Rick

• How to avoid the transparent background, white in smart object (psb) conversion when the image track high fidelity that we have the ability to ignore track of white up to 16 colors.

  I have an image psd file in photoshop cc 2014 the layer background transparent. I wanted to convert to vector. The best option I've seen was converted first to a smart object in photoshop by layer-> Smart objects-> convert to smart object. then he exported a CPS. Then I opened the file in illustrator and applied image tracking tool, but the background transparent got converted to white but I had the option to skip white up to 16 trace of color. But in the case of Conversion of high fidelity, the option do not know white is not available, what do I do now?

  After using the Trace of the Image and expand the result, just find a part that is filled with white and use Select > same > fill and just delete.

• CP8: import from powerpoint - keep the individual objects on the slide

  I did an import of PowerPoint and chose the high fidelity, but it is always also bring the slide as a single object, so I can't manipulate objects on the screen. I thought that each form would incorporate as a smart form that I could handle individually. Is there a way to get there?

  Indeed, nothing has changed on the import, you are not individual objects. High-fidelity means that animations etc will play with more precision. Captivate is not a PPT-plug-in as many users seem to think so. Ago real autour plugins if you think that a TPP can make a good e-Learning course (you think that I am not convinced that a presentation tool is a tool of e-Learning, sorry for that).

• When an object is set to appear on the slide, it stops the player. How can I fix it?

  An object has the value appears a few seconds in the slide. It works very well in the player, but when you preview/publish, the blade stops playing at the point when this object is set to appear. You must press play so he could appear. Why does not the entire slide? Why did he stop?

  And answering your question is or you have more problems? Wire is still profoundly marked also unanswered.

• [Cp] Select object on the timeline and move it on the slide with the cursor keys?

  Hello

  I don't know if there is a shortcut for this:

  Sometimes it is easier to select an object in the timeline, but if you try to use the cursor keys to move, you move IN the timeline panel.

  Is it possible to move to the slide edition?

  Thank you.

  PJ

  I just found the answer:

  -Click on the layer in the timeline of the object

  -move the mouse over the object on the slide: you can move with the cursor keys.

• Is there a way to select the slide objects (images, buttons, etc.) in a list?

  Is there a way to select the slide objects (images, buttons, etc.) in a list so that it is easier to choose a specific item when you edit a slide Captivate? The same way as 3D drawing programs have lists of objects in the scene? I have several articles on top of the other, and it becomes a pain to select the correct element.

  The scenario presents items in a list. And clicking on the list allows you to select them. You can also hide, show, lock, and unlock it.

  

  See you soon... Rick