[Cp] Select object on the timeline and move it on the slide with the cursor keys?

Similar Questions

• Moving an object using the arrow keys

  I think I've changed the default distance to move an object using the arrow keys of 1 Point (1/72 inch). Can you help me change the default or tell me how to set the distance you can move an object such as a text field using the arrow keys. Thank you.

  It is based on your grid interval setting in the drawing AIDS palette. For a grid of 1 point, you would need apart 12/pc (although it says the points of the grid is picas, points 12-pica).

  I find 1 point too fine, I use a grid of 4/pc (3 points) and I have all my subject base around multiples of 3 measurements.

• my laptop with vista booted up and I get a blank screen with a cursor that I can move.

  I have a PC Toshiba laptop with vista.  Everything worked well until one day he started upward and I get a blank screen with a cursor that I can move.

  I tried all modes of security with no luck.
  I noticed that when it starts in safe mode it will stop on windows/system32/drivers/crcdsk.sys every time.
  I did some research and found people have had the same problem and solved with a running repair disk, I did not.  Is there a fix I can do without the disc?
  Thanks for the help in advance

  I solved my problem.

  My problem is that some how I lost my video drivers, so I used hirens boot cd to get and discovered was my drivers were in the files and restored to an earlier date.
  Once it happened I restarted and again, I got a screen.
  I'm not sure how the drivers has been removed, but I ran virus checks and malware on my computer did not
  But its been fixed.  I was afraid that I would have to rebuild and go through the hassle to move my files and rebuild it but glad I do not have
  Thanks for all the help

• Houston-25013: too many objects match the [primary key Lookup.USR_PROCESS_TRIGGERS USR_EMP_TYPE] oracle.jbo.Key.

  Hello

  I am trying to open the Console of the IOM of Sysadmin,

  try checking the research,

  search specific "Lookup.USR_PROCESS_TRIGGERS".

  and get the error on the screen

  Houston-25013: too many objects match the [primary key Lookup.USR_PROCESS_TRIGGERS USR_EMP_TYPE] oracle.jbo.Key.

  This known issue?

  This patch it for it?

  tried searching discussion forums, nothing here

  Thank you

  Check from the console design.  Looks like you have a duplicate key Code value.

  -Kevin

• to find the number of records retrieved in the select statement in the cursor

  Hi all
  with the cursor, I'm selecting select statement together and writing in the .txt file.
  his worksheet, but it should not open the file, if the cursor returns nothing.
  How to find the number of records returned by the select statement in the cursor.
  pls help me.
  
  Thank you...

  Don't understand what you're trying to say, but maybe it's...

  DECLARE
     vCounter NUMBER;
     -- Other variables...
  BEGIN
     vCounter:=0;
     FOR .. IN cursor LOOP
      IF vCounter=0 THEN
        -- Here open file...
        -- Here write one time data...
      END IF;
      -- Here write cursor data...
      vCounter:=1;
     END LOOP;
  END;
  

  -Clément

• Illustrator 2015.3 - cannot select objects in the layers palette

  After having upgraded to 2015.3 this morning, I can not select the layers to reorganize in the layers palette. The file is one I created before the update - but even a newly created file has this same problem.

  He puts the light color to the right of the object in the layers palette, but refused to move the object upward or down in the stack.

  Has anyone else had this problem and solved?

  Mac Yosemite 10.10.5.

  Thank you

  Beth

  Thanks Mike - I found my answer: decouple, decouple, dissociate. I who appears when objects are grouped a few times it can not be moved until it was separated.

• How to extract an object from a picture and move it to another

  I would take a person to an as and him insert a different picture which is the fact & the best way?

  There is also my new favorite method: using a clipping mask.

  1. Make a selection of the area that you do not want to be covered by the incoming image:
     
  2. Invert the selection and press Ctrl + J to copy it into a new layer:
     
  3. Paste the picture in the photo of the target:
     
  4. Hold down the ALT key, and then click the line that separates the pasted layer of the copied layer to create clipping mask:
     

  It will automatically be made-up of:

  

  Ken

• Need to know how long takes the Select statement of the cursor?

  Hi people
  I want to know the duration of execution of the cursor in a stored procedure.
  
  Piece of my code is provided below.
  
  procedure Process_PCN_MAT_Custs)
  p_PCN_OID in varchar2,
  p_days_back number
  ) is
  number of vcount;
  v_newoid varchar2 (16);
  date of pcn_create_date;
  T_DATE: = to_char (sysdate, ' dd/mm/yyyy hh24:mi:ss');
  cursor (SAP_Customers)
  x_PCN_OID varchar2,
  number of x_days_back
  date of x_pcn_create_date
  ) is
  Select
  KUNNR,
  Max (soldflag) soldflag,
  Max (shipflag) shipflag,
  Max (endflag) endflag,
  Max (custName) custname
  de)
  Select / * + DRIVING_SITE (bims_pcn_shipments) * /.
  KUNNR,
  SoldFlag,
  ShipFlag,
  EndFlag,
  custName
  Of
  bims_pcn_shipments_mview
  
  where
  material_number in (select sap_material_no from the pcn.material where pcn_oid = x_PCN_OID)
  and bdr_date > (x_pcn_create_date - x_days_back)
  
  UNION
  Select / * + DRIVING_SITE (bims_pcn_shipments) * /.
  KUNNR,
  SoldFlag,
  ShipFlag,
  EndFlag,
  custName
  Of
  bims_pcn_backlog_mview
  
  where
  material_number in (select sap_material_no from the pcn.material where pcn_oid = x_PCN_OID)
  and bdr_date > (x_pcn_create_date - x_days_back)
  
  )
  Group
  KUNNR;
  dbms_output.put_line to_char (v_date);
  
  Begin
  Open SAP_CUSTOMERS
  ---
  ---
  ---
  close SAP_CUSTOMERS
  end
  
  I get an error of compilation for this line [T_DATE: = to_char (sysdate, ' dd/mm/yyyy hh24:mi:ss');].
  Saying "+ Error (95,12): PLS-00103: encountered the symbol"="when expected as follows: constant exception < an ID > < a double quote delimited identifier > table Fedya double Ref char time timestamp interval date binary character national nchar"< an ID >"symbol has been replaced for"="continue +.»
  
  I would be grateful if someone can help me solve this weired compilation error.
  
  Thank you
  Vineet

  Then you need to go to the function [DBMS_UTILITY. GET_TIME. http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_util.htm#sthref7809].

  Something like that...

  n := dbms_utility.get_time;
  
  dbms_output.put_line( (dbms_utility.get_time-n)/100) || ' seconds....' );
  

  Published by: Karthick_Arp on January 16, 2009 05:07

• Select (or remove) the cursor at the end of the wave

  (How) select (or remove) the wave of the current position of the cursor to the end of the wave? (without having to drag the cursor to the end)

  For laptops without the HOME/END keys, use the function + arrow left/right keys.  So SHIFT-FUNCTION-RIGHT selects at the end of the file.

• HP laptop, 2000 - 2a20CA: Page of the screen shrinks by using the cursor key

  Laptop HP 2000-2a20CA

  No. B5R61UA

  It seems the upgrade from Win 7 to win 10 Home edition, in navigation or by using a Microsoft Office program, the windows Explorer.

  When you move the cursor with the touchpad and then listen to select a link, function etc. anywhere on the screen/page.

  The screen will decrease in size to the left or right of the screen or reduce to the taskbar.

  Clues, there is problem Win 10 or touchpad.

  HP 2000-2a20CA, running Windows 10 laptop

  Thank you

  I think I solved the problem because now I think.

  To check the HP site looking for updates to Win 10 and none were found.

  But then I changed my version of Windows to win 8 then rechecked updates and there is an update for the touchpad dated March 2016.

  Downloaded and installed, and everything seems OK so far.

  Thanks again.

• The cursor keys are not properly changing to the next/previous image

  In recent days, one of my two computers-Lightroom shows a bug quite boring, standing, on the cursor left/right keys:

  It happens to the magnifying glass:

  When I press the right cursor button, Lightroom does not change to the next image

  Instead, it does not change to the next image, before it reaches the end of the file .

  At the same time with the slider to the left, which always takes me to the first image in the folder...

  Navigation in the Loupe is almost impossible, just the mousewheel still lets you change to the next/previous image.

  This happens for all the sets, catalogs, folders, etc. If I have a choice, so it takes me to the image of first/last of the selection, nothing between possible.

  All the advice, what was wrong with my system? Everything was good a few weeks ago, and everything works fine on my other computer, which has just the same behavior...

  Thanks for the tips!

  Harald

  After hours of tests, I identified the reason:

  The issue has been raised by the service «skdaemon.exe»

  It's supposed to be a utility enhancing keyboard, which was preinstalled (und later updated) on this computer.

  After disabling (from autostart), LR works very well once again, and I did not notice the missing keyboard still works.

  Maybe this helps someone else to circumvent this problem and thanks for the support.

  Harald

• Activation of video while moving under the cursor on the timeline

  Hi all!

  I was wondering if there was a way to allow the abilty to see the video when you move on the timeline under the cursor.  I´ll try to explain a little better:

  I do a lot of clips, based on the Action takes, and I put the video (or certain moments in the video, like the firing of a gun) at the appropriate time with the music, for example on the first beat of a 4/4 timing.  The problem is, I try to put this point in the video under the cursor (I found the point in the Audio where I hold to come out, adjust my cursor on the timeline and move the video clip of left/right below). The problem in this is that when I move the video clip to get the points aligned, I can´t see the video, it just shuts down.  I do it a lot in Sony Vegas, I am able to see the video as I move under the cursor on the timeline and it works fine, but I really prefer to use the first place, but exactly this problem is what is going to send me back to Vegas.

  My question basically boils down to: is there a way I can have first SHOW me the video under the cursor on the Timeline AS I MOVE it?

  Thank you very much in advance!

  War

  I don't know of a way to get the framework under the read head display when dragging a clip. However, if you use keyboard shortcuts to 'push' the clip left or right, the current image is shown.

  A completely different approach, if you have not tried, would be to use markers of audio video synchronization. Put a marker about synchronization in two clips, then select both, right click and select Synchronize. In the dialog box synchronize, select markers.

• zOrderPosition error caused by methods "duplicate" and "move".

  I created a few trails and grouped with a script.  Then I selected an item below them and tried to be zOrderPosition him with a script. And I got an error.

  Is there a way to get rid of this?

  Here's some code.

  Please select a path and fondues test1 test2 twice.  You will get an error at the second time.

  (Tested with CS3 and CC 2015)

  Thank you.

  function test1() {/ / error (at the second time)}

  lay var = activeDocument.activeLayer;

  Group var = lay.groupItems.add ();

  var p1 = lay.pathItems.ellipse (100,100,10,10);

  var p2 = p1.duplicate ();

  var p3 = p1.duplicate ();

  P2. Move (Group, ElementPlacement.PLACEATEND);

  P3. Move (Group, ElementPlacement.PLACEATEND);

  Alert(activeDocument.Selection[0].zOrderPosition);  error

  }

  function test2() {/ / error (at the second time)}

  lay var = activeDocument.activeLayer;

  Group var = lay.groupItems.add ();

  var p1 = group.pathItems.ellipse (100,100,10,10);

  var p2 = p1.duplicate ();

  Alert(activeDocument.Selection[0].zOrderPosition);  error

  }

  function test3() {/ / NO error}

  lay var = activeDocument.activeLayer;

  Group var = lay.groupItems.add ();

  var p1 = lay.pathItems.ellipse (100,100,10,10);

  var p2 = p1.duplicate ();

  P2. Move (Group, ElementPlacement.PLACEATEND);

  Alert(activeDocument.Selection[0].zOrderPosition);  NO error

  }

  Test1();

  Current error. If all separating them, the error will not happen. Alternatively, you can try:

  function zIndex ( obj ) {
      var arr = obj.parent.pageItems, i = arr.length;
      while ( i-- ) { if ( arr[i] === obj ) return i; }
      return -1;
  }
  function test1() {
      var lay = activeDocument.activeLayer;
      var group = lay.groupItems.add();
      var p1 = lay.pathItems.ellipse(100,100,10,10);
      var p2 = p1.duplicate();
      var p3 = p1.duplicate();
      p2.move(group, ElementPlacement.PLACEATEND);
      p3.move(group, ElementPlacement.PLACEATEND);
      alert( zIndex(activeDocument.selection[0]) );  // no error
  }
  function test2() {
      var lay = activeDocument.activeLayer;
      var group = lay.groupItems.add();
      var p1 = group.pathItems.ellipse(100,100,10,10);
      var p2 = p1.duplicate();
      alert( zIndex(activeDocument.selection[0]) );  // no error
  }
  function test3() {
      var lay = activeDocument.activeLayer;
      var group = lay.groupItems.add();
      var p1 = lay.pathItems.ellipse(100,100,10,10);
      var p2 = p1.duplicate();
      p2.move(group, ElementPlacement.PLACEATEND);
      alert( zIndex(activeDocument.selection[0]) );  // no error
  }
  test1(); test2(); test3();
  

• Can I repair my selection without leaving the tool to refine edge?

  Sometimes, when I'm cutting out images, I see a place where I need to squeeze a little towards the top of my selection.  Time often happens when I'm in the tool refine edge.  Normally, I leave the tool refine edge, make the settings on my selection and then return to the tool refine edge.

  Is there a way to make this tool improve the contour, so I must not leave this window to go back again?  Maybe a modifier key?

  What to do after you make the initial selection (usually with the Quick Selection tool), press the Q key to place the image in the quick mask.  This highlights the selected areas, making it easier to see if you have missed a few.  If the selection is likely to need some post improve the contour of fine-tuning, II verify decontaminate colors to force the output to "New layer with layer mask" so I can firm up an error with the layer mask.

  Something that I found to be a bad idea is to put a post selection refine edge in refine edge to correct errors.  That what is smooth on any detail of edge very well ruin the selection.  Much better to go back in history and do it again properly.

  Refine Edge is nowhere near the intuitive tool that they established when it was introduced, and almost all of the video tutorials that you see ideal object to use.  You almost never see someone trying to select hair from flyaway from a busy background, for example.  The tutorial by Martin Evening is the closest I can think of actually doing it.  It took me the age and age comfortable with refine edge, and I always find new ways to make it better.  Something that I hosted in recently turned on see the RADIUS to see if it encroaches too far in the selection, and if so, deleting some of them by painting with the ALT key.  If you disable Show RADIUS and artifacts, you went a little too far.  I find that this minimises this annoying thing where refine edge suddenly takes a bite out of what you want selected and makes it very thin.

• Too many objects correspond to the primary key oracle.jbo.Key

  I get this error: Too many objects match the primary key oracle.jbo.Key when I tried to look for in a display object where the primary key is consists of more than one filed.

  Use case:

  In Jdeveloper 11.1.2.3 I Entity object called someTable this table has three fields A,B and C where the primary key is consist class towing A and B .

  I created different towing View object of someTable object enity that are someTableVO1 and someTableVO2 . Rated A in the view object somtableVO1 is a List Of Value(LOV) and the data are coming form filed A in the someTableVO2 .

  In application I have a search page that contains a drop-down list of registered A in somTableVO1 . Based on certain conditions, the drop-down list of the values in the list is not static. The value of the drop-down list is editable based on a select query run on someTableVO1 and it is based on the class thried C is NOT part of the primary key .

  The page displays the drop down menu with the correct values. But I have a ValeChangeListener method that will be activated whenever the user selects a value form the drop-down list.

  The problem is:

  The error Too many objects match the primary key is occur whenever I am executing this method.

  Support:

  I think the problem is with multiple fields for the primary key. of curse, there is an overlap in a part of the primary key (IE that paid A or B ) but the combination of A and B are always unique.

  Notes:

  1. I check the query by executing SQL Developer and it shows not all duplicate values.

  2 I don't attach code, because I think that the problem is not on (how to) this is (what to do).

  I hope that the idea is clear

  Problem solved.

  My goal was to show a summer that A form someTableVO1 as a list of value and I was trying to achieve by creating the list of value the same form Entity object . I understand that it was the wrong approach (correct me if I'm wrong). to achieve this in ADF technology, I have to do the following:

  1. Simply to drag and drop the view object from the Data Controls page.
  2. List of options appears asking how you want to display the view object (shape, chart, table, only one selection,...).

  3. Select Single Selection ->ADF one Selection

  4. Select the attributes that you want to show the user a list of values.

  Thanks for your comments.