Object type returning still only 31 lines instead of more lines.

Similar Questions

• I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  1. Draw a set of concentric half circles also spaced, stacked so that the outermost is the most remote.
  2. Use the text tool to add text to the outermost path, thus creating a PathType object.
  3. Select all the paths. Type > threaded text > create.
  4. Text tool: click at the end of the text in the object of PathType. Continue typing.

  

  > If I do that it will not type more.

  A Warp effect is a direct effect. When it is applied to the type of objects, they are still editable text. The chain will deform, however, the text also, not only the paths to which it is attached. Sometimes you want that, sometimes you don't have.

  JET

• How to return data using the object type?

  Hello all - I have an obligation to return the values object type.

  In the same way as

  list - Plan1, Subplan1, Fund1, 2 Fund Fund 3

  list - Plan2, Subplan2, Fund2

  list - plane3, Subplan3, not funds

  
  

  To achieve this I wrote below proc but its giving as response below which is does not correspond with my requirement. Someone has an idea how to write code to get the list of funds against each plan in each line?

  
  

  
  

  Output:
  

  PDB01. () T_T_CONTRACT

  PDB01. T_O_CONTRACT ('p1', 's1', PDB01. T_O_FUND ('p1', 's1', 'f1')),

  PDB01. T_O_CONTRACT ('p1', 's1', PDB01. T_O_FUND ('p1', 's1', 'f2')),

  PDB01. T_O_CONTRACT ('p1', 's1', PDB01. T_O_FUND ('p1', 's1', 'f3')),

  PDB01. T_O_CONTRACT ('p2', 's2', PDB01. T_O_FUND ('p2', 's2', 'f2')),

  PDB01. T_O_CONTRACT ('p3', 's3', PDB01. T_O_FUND (NULL, NULL, NULL))

  )

  
  

  
  

  
  

  DROP TYPE T_T_fund;

  create or replace

  TYPE T_O_fund

  AS OBJECT)

  argument plan_id Varchar2 (128).

  subplan_id Varchar2 (128).

  fund_id Varchar2 (128)

  )

  No final;

  /

  create or replace

  type T_T_FUND

  as the table of T_O_FUND;

  /

  type of projection T_T_CONTRACT;

  create or replace

  TYPE T_O_contract

  AS OBJECT)

  argument plan_id Varchar2 (128).

  SUBPLAN_ID varchar2 (128).

  ov_fund T_o_fund

  )

  no final;

  /

  create or replace

  type T_t_contract as the T_O_contract table;

  /

  -------------------------

  / * Remove T_T_FUND;

  DROP TYPE T_O_fund;

  type of projection T_T_CONTRACT;

  DROP TYPE T_O_contract; * /

  ----------------

  create or replace

  procedure test_cursor (o_c1 OUT sys_refcursor) is

  V_T_T_FUND T_T_FUND;

  v_T_t_contract T_t_contract;

  Start

  WITH (CONTRACTS AS

  SELECT "p1" PLAN_ID, "s1" SUBPLAN_ID FROM DUAL UNION ALL

  SELECT "p2" PLAN_ID, 's2' SUBPLAN_ID FROM DUAL UNION ALL

  SELECT "p3" PLAN_ID, 's3' SUBPLAN_ID FROM DUAL

  ),

  Fund)

  Select "p1" PLAN_ID, SUBPLAN_ID 's1', 'f1' FUND_ID of all the DOUBLE union

  Select "p1" PLAN_ID, SUBPLAN_ID 's1', 'f2' FUND_ID of all the DOUBLE union

  Select plan_id "p1", "s1" subplan_id argument, "f3" fund_id Union double all the

  Select the argument plan_id 'p2', 's2' subplan_id, 'f2' double fund_id

  )

  Select T_O_contract (c.PLAN_ID, c.SUBPLAN_ID, T_o_FUND (f.PLAN_ID, f.SUBPLAN_ID, f.FUND_ID))

  TO COLLECT FEES IN BULK

  in v_T_t_contract

  c CONTRACTS, FUND F

  where C.PLAN_ID = F.PLAN_ID

  and c.SUBPLAN_ID = f.SUBPLAN_ID (+);

  Open the O_C1 for

  SELECT 't' TYP, v_T_t_contract contract_LST

  FROM DUAL;

  end;

  /

  impression o_test

  You can declare the attribute OV_FUND as T_T_FUND data type:

  create or replace type t_o_contract as object (
    plan_id     varchar2(128)
  , subplan_id  varchar2(128)
  , ov_fund     t_t_fund
  );
  /
  

  You will be able to do this:

  with contracts as (
    select 'p1' plan_id, 's1' subplan_id from dual union all
    select 'p2' plan_id, 's2' subplan_id from dual union all
    select 'p3' plan_id, 's3' subplan_id from dual
  ),
  funds as (
    select 'p1' plan_id , 's1' subplan_id, 'f1' fund_id from dual union all
    select 'p1' plan_id , 's1' subplan_id, 'f2' fund_id from dual union all
    select 'p1' plan_id , 's1' subplan_id, 'f3' fund_id from dual union all
    select 'p2' plan_id , 's2' subplan_id, 'f2' fund_id from dual
  )
  select t_o_contract(
           c.plan_id
         , c.subplan_id
         , cast(
             multiset(
               select t_o_fund(f.plan_id, f.subplan_id, f.fund_id)
               from funds f
               where f.plan_id = c.plan_id
               and f.subplan_id = c.subplan_id
             )
             as t_t_fund
           )
         )
  from contracts c ;
  

• Dynamic table returns only a line

  Hello world

  I try to use a Recordset:

  "SOME concerts. EventDate, concerts. Location, concerts. Notes

  CONCERTS

  WHERE the concerts. "EventDate > = CURRENT_DATE.

  When I test the Recordset, I get 3 of the 5 records returned, which is exactly as it should.

  However, when I try to create a dynamic table to display the results - if I choose to show all records, or the default of 10 at a time, it shows the first line results from the Recordset.

  When I try to create a master-detail table and ask him to show one record at a time, it's there for that, but using the next/back navigation links, it takes me to other records, though one at a time.  That tells me that he doesn't know that there should be three records, but it only shows one.

  What am I doing wrong with the dynamic table, here?

  Thank you!

  I suggest that you start the page completely from scratch, because it seems that you made the rookie mistake classic to remove a dynamic object in Design view without realizing that any other PHP code is connected with it. When you work with dynamic objects, keep an eye on what is listed in the server behaviors panel. To remove a server behavior, select the referencing in the Panel and click the button "-" to remove it properly.

  In fact, you have two sets of records on the same page, that do the same thing. One is called to come, the other is called UpcomingShows. You get only a line showing in your table is because you use the recordset "to come". The Dreamweaver recordset code automatically retrieves the first record and then uses a do... while loop to create the region repeated in the table. What has happened is that your changes to the page have resulted in this line who appear before the repeat region:

  mysql_free_result($upcoming);
  

  This destroys the rest of the result of database before using it again. Therefore, only trace never appears.

  Dreamweaver always puts mysql_free_result() after the closing tag. Thus, it seems that your changes caused Dreamweaver to lose track of all the relevant parts of the server behavior. If you move this line to the bottom of the page, your table should work. However, as I said before, I think that it is better to start from scratch.

  One last thing: your SQL query contains the following WHERE clause:

  WHERE gigs.EventDate >= CURRENT_DATE
  

  It is an incorrect syntax for MySQL. It should be like this:

  WHERE gigs.EventDate >= CURRENT_DATE()
  

  CURRENT_DATE() is a MySQL function, not a constant.

  If all goes well, a little less head banging.

• access to the external table of object type

  It is a continuation of ORA-06564: XXX_DAT_DIR object does not exist I'm hoping a different subject line will attract different people who may be able to help me solve the situation
  
  The bottom line is that I can't access my external table of in my object.
  
  Assume that the user is XYZZY. We run a simple nice don't shop here - no roles, just different schemas.
  
  When I connect to sqlplus to run Access simple external table that works, I connect as XYZZY. ( it works )
  
  When I connect my type code compile, I connect as XYZZY. ( so far, so good )
  
  When I connect to run the stored procedure that uses the object type, I connect as XYZZY. ( does not work.  get ORA-06564: there is no error object XXX_DAT_DIR )
  
  As mentioned above, I've recently logged and re-run all grants to the user XYZZY.
  
  When I ran the small test which included the role set to none (after replaying all grants), I logged as user XYZZY, and even though this user has grants, the test has failed. ( , it was a test based on an idea that the problem was that the subsidies have been an role, not the user.  Apparently not the problem ).
  
  Moira
  
  Published by: user7532421 on July 20, 2010 13:25

  Hello

  I tried the same scenario and it works fine for me (not at all an exception and the data is loaded into the target at the end table).
  I created all the objects (directory, types of objects, outdoor table heaps under the same user):

  Here's what I did:

  -- Under system
  GRANT CREATE ANY DIRECTORY TO hr
  /
  
  --under HR:
  
  CREATE OR REPLACE DIRECTORY
  XXX_DAT_DIR AS 'H:\Temp';
  /
  
  CREATE TABLE X_TABLE_XO
  (
    L1  VARCHAR2(3 BYTE),
    C1  VARCHAR2(3 BYTE),
    C2  VARCHAR2(3 BYTE)
  )
  ORGANIZATION EXTERNAL
    (  TYPE ORACLE_LOADER
       DEFAULT DIRECTORY XXX_DAT_DIR
       ACCESS PARAMETERS
         ( RECORDS DELIMITED BY NEWLINE
         NOBADFILE
         NODISCARDFILE
         NOLOGFILE
         SKIP 0
         FIELDS TERMINATED BY ';'
         MISSING FIELD VALUES ARE NULL
         REJECT ROWS WITH ALL NULL FIELDS
         (
           L1 Char,
           C1 Char,
           C2 Char
         )  )
       LOCATION (XXX_DAT_DIR:'test_ext_Table.txt')
    )
  REJECT LIMIT UNLIMITED
  NOPARALLEL
  NOMONITORING;
  /
  

  Here is an excerpt of my file:

  L1;v1;v2
  L2;v3;v4
  L3;v5;v5
  L4;v6;v6
  

  then:

  
  CREATE TABLE my_table AS SELECT * FROM x_table_xo WHERE ROWNUM<=0
  /
  select column_name,data_type,data_length from user_tab_columns where table_name='MY_TABLE'
  
  COLUMN_NAME,DATA_TYPE,DATA_LENGTH
  L1,VARCHAR2,3
  C1,VARCHAR2,3
  C2,VARCHAR2,3
  

  then (still in HR)

  CREATE OR REPLACE TYPE subloader UNDER dataloader (
     CONSTRUCTOR FUNCTION subloader (
        SELF          IN OUT NOCOPY   subloader,
        record_date                   DATE
     )
        RETURN SELF AS RESULT,
     OVERRIDING MEMBER FUNCTION load_data
        RETURN NUMBER
  )
  ;
  /
  
  CREATE OR REPLACE TYPE BODY subloader
  AS
     CONSTRUCTOR FUNCTION subloader (
        SELF          IN OUT NOCOPY   subloader,
        record_date                   DATE
     )
        RETURN SELF AS RESULT
     IS
     BEGIN
        --    SELF.name := name;
         --   SELF.area := 0;
        RETURN;
     END;
     OVERRIDING MEMBER FUNCTION load_data
        RETURN NUMBER
     IS
        n   NUMBER;
     BEGIN
        INSERT INTO my_table
           (SELECT *
              FROM x_table_xo);
  
        n := SQL%ROWCOUNT;
        COMMIT;
        RETURN n;
     END;
  END;
  /
  

  (no error). then

  set serveroutput on size 5000;
  
  DECLARE
     sl   subloader;
     n number;
  BEGIN
     sl:= subloader(sysdate);
     n:=sl.load_data;
     dbms_output.put_line('n:'||n);
  END;
  /
  

  -It works...

  select * from my_table
  /
  L1,C1,C2
  L1,v1,v2
  L2,v3,v4
  L3,v5,v5
  L4,v6,v6
  

  What is curious, it's that all directories are owned by SYS, even if you create with HR! (select * from all_directories)->, I tried both (System and HR, but the table is owned by HR) not-> no problem. in both situations.

• If a view object query returns no rows, can the vacuum to be tested at all?

  All those who know or have also experienced:
  
  I guess that the answer should be Yes, but I tried anyway, I still didn't worked. Here is the code (it's a method behind a command button, a bean of support (I use JDeveloper 10.1.3.4).) In the code, LoggedInStudent is the name of a view object; ZBLCModule is the name of the application module):
  

      public String commandButton1_action() {
          FacesContext fc = FacesContext.getCurrentInstance();
          ValueBinding vb = fc.getApplication().createValueBinding("#{data}");
          BindingContext bc = (BindingContext)vb.getValue(fc);
          DCDataControl dc = bc.findDataControl("ZBLCModuleDataControl");
          ApplicationModule am = (ApplicationModule)dc.getDataProvider();
          ZBLCModuleImpl zblcam = (ZBLCModuleImpl)am;
          LoggedInStudentImpl studentsFound = (LoggedInStudentImpl)zblcam.getLoggedInStudent();
          
          String navCase = null;
          
          // Test (1): if the view cache is empty; always bombs up the application if it IS empty:
          if(studentsFound.getAllRowsInRange().length == 0) {
              navCase = "userNotFound";
          // (2) The following three tests gets to run only when the cache is not empty; they work fine.
          } else if (((Number)studentsFound.first().getAttribute("HoursAttm")).floatValue() == 0.0) {
              navCase = "noHours";
          } else if (((Number)studentsFound.first().getAttribute("Balance")).floatValue() > 0.0) {
              navCase = "notZero";
          } else if (!(studentsFound.first().getAttribute("Validated").equals(" "))) {
              navCase = "validated";
          } else {
              navCase = "zeroBal";
          }
          return navCase;
      }

  When the view object query returns a line, the whole of the application works without error. When the query returns no rows, test (1) always bombs toward the top of the application, prompting a Houston-30003 error.
  
  (1) test, I tried the following:
  

    if (studentsFound.getAllRowsInRange().length == 0)
    if (studentsFound.first() == null)
    if (studentsFound.getEstimatedRowCount() == 0)
    if (studentsFound.isDead()) //I do not know what isDead() does; just tried desperately.
    if (studentsFound.equals(null))
    if (studentsFound.getCurrentRow() == null)

  With each of these events, I got an error of Houston-30003. It does not matter what looks like the conditional test; It is important only when the objects from view cache is empty. If the view cache is not empty, everything, including the test (1), works very well. And when the cache is empty is not because of the failure of the connection to the database, but because the student is not in the data table and line are for the student.
  
  It is a requirement of the company to do something when the view object query returns no rows. Can it be tested at all? How?
  
  Or is there something wrong in the first lines in the method before the {color: green} String navCase = null; {color} line?
  
  Thank you very much for your help!
  
  
  Newman

  Hello

  What you have done, is to get a handle to the object that CAN execute queries to the database.
  However, you do not query the database.

  Just add:

    LoggedInStudentImpl studentsFound = (LoggedInStudentImpl)zblcam.getLoggedInStudent();
    //New line
    studentsFound.executeQuery();
  

  The code that Shay has given you is when you do not have a request for all module, but since you are talking about a command etc button I guess that the module of the application is already active.
  The line I gave you should be enough to make it work.

  I'd be careful with the

  studentsFound.hasNext();
  

  I suggest to use estimatedRowCount();

  -Anton

• Casting of object type to aid to more specific

  Hello

  I'm bit stuck in the legacies of the class in my current project. I implement a zero-coupling messaging architecture that uses variant tables to store objects to be cast to sample.

  The good news: it works in general, little we take a peek at some photos

  I tried the script of coulee before using an example that works as expected.

  

  Shows probe resulting:

  

  The Message of abstract [14] is cast to the more specific Message for the controller test [15], [9]

  Now, this implementation with the variants table, change things unfrotunately:

  

  The only thing that apparently changes is, as the class to be cast to a return value of a Subvi (actually reading the table variant) [12].

  As shown in the probe that the casting does not work this time... There is also no error on the terminal error.

  I have to admit, I'm quite confused... especially because in another class this exact methodiolgy works...

  Any thoughts?

  See you soon

  Oli

  Cast throws more specific to the type of object shown on the thread in the IDE, regardless of the type of the actual object passing along this thread (i.e. type of YARN and not DATA type).

  I bet that your wire to the Center terminal of the 'to more specific' is a son of the same type as the object you are trying to change but actually a more specific object.  The 'Cast to more specific"is a compiling decision, not a decision of execution. As such it takes the type of thread, not the object type for the casting.

  Look at the names on the left of your probes, they are all the same in the example below (all wires are nominally of the same type).  It's the onfo LV casting (assuming the names corresponding to the nominal type of the thread) not use content REAL of the wire.

  Shane.

  PS to make things clearer, give each hierarchy in your legacy a different aspect of wire.

• Filter for a specific value object type

  I would like to know if the documents loaded on an object type can be interrogated for a specific value. For ex, I wanted to fetch all the records of the emp and load it into an object. I wanted to ask the object out of the loop to query for a specific deptno. I understand a query simpe SQL would be much faster in the scenario below, but the report itself used in our system uses several tables and some of them have millions of records from different sources as accounts suppliers, accounts receivable, accounting, etc. and they are treated differently for each source before that the result will be published the report. I took the table emp for example and wanted to know if the type of object can be queried for a specific column outside the loop.

  DECLARE

  CURSOR cur_emp IS SELECT * FROM EMP;

  TYPE emp_obj IS TABLE OF cur_emp % ROWTYPE INDEX BY PLS_INTEGER;

  l_emp_tab emp_obj;

  BEGIN

  OPEN cur_emp.

  LOOP

  Get the cur_emp COLLECT LOOSE l_emp_tab LIMIT 1000;

  EXIT WHEN l_emp_tab.count = 0;

  BECAUSE me IN 1.l_emp_tab.count

  Loop

  dbms_output.put_line (' Ename:' | l_emp_tab (i) .ename |', Deptno:' | .deptno l_emp_tab (i));

  END LOOP;

  END LOOP;

  -Can I ask specific employee to a deptno outside the loop FOR without using a temporary table

  -something like "SELECT * FROM TABLE (type_name) WHERE DEPTNO = x_Deptno.

  END;

  /

  In a collection of table selection is not effective, there are better ways to do it.

  Why not create a view?

  create view...

  Select * from source1 Union all the

  Select * from source2 Union all the

  Select * from source3

  -or-

  Using ref cursor return... clause, so you can make conditional cursors

  If somecondition then

  Open the NEWS for

  Select * source1;

  on the other

  Open the NEWS for

  Select * from source2.

  end if;

  -or-

  Dynamics based SQL ref cursor

  DECLARE

  TYPE EmpCurTyp IS REF CURSOR;

  v_emp_cursor EmpCurTyp;

  employees emp_record % ROWTYPE;

  v_stmt_str VARCHAR2 (200);

  v_e_job employees.job%TYPE;

  BEGIN

  -Dynamic SQL statement with placeholder:

  v_stmt_str: = ' SELECT * FROM employees WHERE job_id =: I;

  -Open the cursor & specify bind argument in the USING clause:

  V_emp_cursor OPEN FOR v_stmt_str with the HELP of 'MANAGER ';

  -Extraction of the lines of result set one at a time:

  LOOP

  SEEK v_emp_cursor INTO emp_record;

  EXIT WHEN v_emp_cursor % NOTFOUND;

  END LOOP;

  -Close the cursor:

  CLOSE V_emp_cursor;

  END;

  /

  -or-

  
  

  Load in an intermediate table (as a temporary table)
  

• Define a map or ORDER method for the object type

  Hi gurus

  I created an object and then its type and then I use this object and type based on line, see below:

  Create the object

  CREATE OR REPLACE

  TYPE test_object

  IS

  OBJECT

  (

  next_appearance_dt DATE, - next_appearance_dt

  youth_adult VARCHAR2 (5) - youth_adult

  ) ;

  
  /

  Create the object Type

  CREATE or REPLACE TYPE t_docket_object IS TABLE OF THE test_object;

  /

  Create function Pipeline

  FUNCTION to CREATE or REPLACE f_report (p_dt date, p_c_cd VARCHAR2)
  return t_test_object pipeline
  IS
  BEGIN
  FOR J IN)
  Select distinct test_object)
  next_appearance_dt,--862,
  'YOUTH '.
  ) AS test_object
  Jen.next_appearance base
  WHERE 1 = 1
  AND (base.next_appearance_dt = p_dt)
  AND (base.circuit_point_cd = p_c_cd)
  - and cse.information_id = 322
  -ORDER 15 - alias_name
  )

  loop
  PIPE ROW (J.test_object);
  END loop;
  END;

  /

  Run function

  SELECT * FROM TABLE (F_REPORT (TO_DATE('25-sep-2015','dd-mon-yyyy'),'1 '))

  Error

  ORA-22950: cannot ORDER objects without map or ORDER method

  ORA-06512: at "F_REPORT", line 5

  22950 00000 - "cannot ORDER objects without map or ORDER method.

  * Cause: an object type must have a defined for map or ORDER method

  all comparisons other than equality and inequality comparisons.

  * Action: Define a map or ORDER method for the object type

  I know the reason of this error and the reason is that I use the clause separate in my pipeline service, but do not know how to get rid of this error...

  Confuse you the type of table with the object type. He forge

  Select test_object (next_appearance_dt) test_object

  Not:

  Select t_test_object (next_appearance_dt) test_object

  Then:

  SQL > CREATE OR REPLACE
  FUNCTION f_report (DATE p_dt 2,
  3 P_C_CD VARCHAR2
  4                   )
  5 t_test_object of RETURN
  6 IN PIPELINE
  7 EAST
  BEGIN 8
  9 FOR (IN) v_rec
  10 WITH () DID
  11. SELECT TO_DATE('01-jan-2015','dd-mon-yyyy') NEXT_APPEARANCE_DT
  the double 12
  13                                  )
  14 select test_object (next_appearance_dt) test_object
  15                          from  t
  16                      ) LOOP
  PIPE 17 ROW (v_rec.test_object);
  18 END OF LOOP;
  END 19;
  20.

  The function is created.

  SY.

• The procedure with parameter output from test object type

  I have the sub object created with spec and body type.

  I need to test the procedure seen ino parameter object type.

  could you please help me test the procedure!

  create or replace type typ_obj_test as object
  (
     a_date   date,
     a_type   varchar2(10),
     a_status varchar2(2),
     descr    varchar2(10),
     a_id     number(10),
     constructor function typ_obj_test(a_date   date
                                      ,a_type   varchar2 default null
                                      ,a_status varchar2 default null
                                      ,descr    varchar2 default null
                                      ,a_id     number default null) return self as result
  );
  /
  create or replace type body typ_obj_test is
     constructor function typ_obj_test(a_date   date
                                      ,a_type   varchar2 default null
                                      ,a_status varchar2 default null
                                      ,descr    varchar2 default null
                                      ,a_id     number default null) return self as result is
        v_test varchar2(1);
        v_id   number(10);
     begin
        self.a_date   := a_date;
        self.a_type   := a_type;
        self.a_status := a_status;
        self.descr    := descr;
        self.a_id     := a_id;
        return;
     end;
  end;
  /
  create or replace procedure p_obj_test(p_obj_param in out typ_obj_test) is
  begin
     dbms_output.put_line('Checking the object type' || p_obj_param.a_date || '@' || p_obj_param.a_type || '@' || p_obj_param.a_status || '@' ||
                          p_obj_param.descr || '@' || p_obj_param.a_id);
  end;
  /
  

  You seem to be missing a table that could hold the object. See the next topic, especially the line # 43:

  Connected to:
  Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
  
  SQL> create or replace type typ_obj_test as object
    2  (
    3    a_date  date,
    4    a_type  varchar2(10),
    5    a_status varchar2(2),
    6    descr    varchar2(10),
    7    a_id    number(10),
    8    constructor function typ_obj_test(a_date  date
    9                                      ,a_type  varchar2 default null
  10                                      ,a_status varchar2 default null
  11                                      ,descr    varchar2 default null
  12                                      ,a_id    number default null) return self as result
  13  );
  14  /
  
  Type created.
  
  SQL> create or replace type body typ_obj_test is
    2    constructor function typ_obj_test(a_date  date
    3                                      ,a_type  varchar2 default null
    4                                      ,a_status varchar2 default null
    5                                      ,descr    varchar2 default null
    6                                      ,a_id    number default null) return self as result is
    7        v_test varchar2(1);
    8        v_id  number(10);
    9    begin
  10        self.a_date  := a_date;
  11        self.a_type  := a_type;
  12        self.a_status := a_status;
  13        self.descr    := descr;
  14        self.a_id    := a_id;
  15        return;
  16    end;
  17  end;
  18  /
  
  Type body created.
  
  -- Create a Nested table type array of above object type
  SQL> create or replace type nt_typ_obj_test as table of typ_obj_test;
    2  /
  
  Type created.
  
  -- Keep in out parameter's type as the nested table type
  -- modified the proc to do loop so that multiple records can be passed via object type
  SQL> create or replace procedure p_obj_test(p_obj_param in out nt_typ_obj_test) is
    2  begin
    3  for i in p_obj_param.first..p_obj_param.last
    4  loop
    5    dbms_output.put_line('Checking the object type' || p_obj_param(i).a_date || '@' || p_obj_param(i).a_type || '@' || p_obj_param(i).a_status || '@' ||
    6                          p_obj_param(i).descr || '@' || p_obj_param(i).a_id);
    7  end loop;
    8  end;
    9  /
  
  Procedure created.
  
  --Call the procedure
  SQL> set serveroutput on
  SQL> declare
    2  i_nt_typ nt_typ_obj_test ;
    3  begin
    4  i_nt_typ:=nt_typ_obj_test(typ_obj_test(sysdate,'A','Y','Descr',23),typ_obj_test(sysdate,'X','Z','ewe',55));
    5  p_obj_test(i_nt_typ);
    6  end;
    7  /
  Checking the object type26-MAR-15@A@Y@Descr@23
  Checking the object type26-MAR-15@X@Z@ewe@55
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

• Link from Oracle to MySQL database select only one line

  Hello

  I created a connection to the batabase Oracle 11.2 to a MySQL database via a database link. The following statement shows that 35 lines are in the mySQL table:

  SQL > select count (*) from 'main_pages"@MOREWEB;

  COUNT (*)

  ----------

  35

  But a normal select statement only return 1 row.

  SQL > select 'subject' of 'main_pages"@MOREWEB;

  Object

  ------------------------------------------------

  Übersicht: references

  I use the mysql-connector-odbc driver - 3.51.30 - winx64. One is the newer version be installed because on Windows Server 2008 R2, I get an error with a missing dll file. The DataDirect ODBC driver is not possible, because we like to use the MySQL-database free one only support for DataDirect enterprise edition.

  I have also tried to limit the HS_OPEN_CURSORS or do not limit the HS_FDS_FETCH_ROWS, but there is no difference in the result. I always get only one line.

  HS Init.ora
  # This is an example of initialization file of the agent that contains the HS settings # necessary for the database to ODBC gateway # # HS init parameters # HS_FDS_CONNECT_INFO = moreweb HS_FDS_TRACE_LEVEL = WE HS_FDS_FETCH_ROWS = 1 # # Required for the non-Oracle system environment variables # #set < varenv > = < value >

  HS trace file

  Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066 Heterogeneous Agent release 11.2.0.1.0 Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066 Version 11.2.0.1.0 HOSGIP to 'HS_FDS_TRACE_LEVEL' returned 'ON '. HOSGIP to 'HS_OPEN_CURSORS' returned '50 '. HOSGIP to 'HS_FDS_FETCH_ROWS' returned '1 '. HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536". HOSGIP to 'HS_NLS_NUMERIC_CHARACTER' returned '. " HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '. HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '. HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '. HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '. HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '. HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '. HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG". HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '. HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '. HOSGIP to 'HS_FDS_CHARACTER_SEMANTICS' returned 'FALSE '. HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '. HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '. HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '. HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.

  HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.

  using mpgw as the default value to "HS_FDS_DEFAULT_OWNER".

  HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.

  SQL text of hgopars, id = 1, len = 36...

  45 00: 53454 C 43542043 4F554E54 282 HAS 2920 [COUNT (*) SELECT]

  10: 46524F4D 20606D 61 696E5F70 61676573 [FROM ' main_pages]

  20: 60204131 [' A1]

  Delayed open until the first fetch.

  Deferred execution open.

  SQL text of hgopars, id = 1, len = 40...

  45 00: 53454 C 43542041 312E6073 75626 has 65 [SELECT A1.' subje(1)]

  10: 63746020 46524F4D 20606D 61 696E5F70 [ct' FROM ' main_p]

  20: 61676573 60204131 [ages A1]

  Delayed open until the first fetch.

  Deferred execution open.

  Please can someone help me.

  Thank you.

  Bianca

  Bianca,

  Everything I've read on this point to a need to install/reinstall the Microsoft Visual C++ Redistributable Package for windows OS 2008.

  You will need to download the appropriate version for your microsoft form system.  There is a lot of information on this topic.  Just

  search on the web, and it should help you in the right direction.

  Thank you!
  Matt

• table is expected to insert only one line

  Hi all

  my need is to create the table that allows to insert only one line.

  How can I make it?

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  "CORE 11.2.0.1.0 Production."

  AMT for Linux: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production

  Hello

  2621671 wrote:

  Hi all

  my need is to create the table that allows to insert only one line.

  How can I make it?

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  "CORE 11.2.0.1.0 Production."

  AMT for Linux: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production

  You can create a unique Index based on a function, like this:

  CREATE UNIQUE INDEX table_x_u ON table_x (NVL2 (col_1, 1, 1));

  You can use any column of any data type.  In other words, the function may return a NUMBER, if the column referenced in the function is a NUMBER.

  Regardless of whether the column is NULL or not; not more than 1 rank is authorized.

• PLS-00565: must be filled as a target of REF (object type)

  11 GR 2

  ---------------

  Why do I get below error? I google search, but I did not understand the reason. can you please explain more clearly. Thank you

  CREATE or REPLACE TYPE 'A' as object)

  x_ number,

  y_ varchar2 (10),

  Members procedure to_lower

  );

  ORA-06545: PL/SQL: compilation error - abandoned compilation

  ORA-06550: line 7, column 1:

  PLS-00103: encountered the symbol "CREATE".

  ORA-06550: line 0, column 0:

  PLS-00565: must be filled as a target of REF (object type)

  It's one of the things that confuses many people.

  The problem is that; is used in two ways.

  When you type a normal SQL command, it means the end of the statement in SQL * more

  and actually run the command. Then

  Select *.

  from table_a

  with x = 'Y ';

  goes on three lines and it is the semi colon which means its end and run it.

  When you have the code (type, procedure, trigger, etc.) it's just a terminator of instruction

  create or replace procedure x

  as

  number of v_dummy;  -Terminator of instruction - does not cause the execution/compilation.

  Start

  Select x

  in v_dummy

  of y; -Terminator of instruction - does not cause the execution/compilation.

  end; -Terminator of instruction - does not cause the execution/compilation.

  /

  Now the ' / ' is the thing which the compilation.

  Unfortunately "/" can also be used in SQL * more instead of two points at the end of things and allow execution of semi

  Select *.

  from table_a

  with x = 'Y '.

  /

  run this statement.

  Then

  Select *.

  from table_a

  with x = 'Y ';

  /

  it run twice (once from; once due to /)

  So, in summary, don't you do not put a "/" after each comma, after those where it is necessary to

  the compilation, which will be the top of my head,

  packages, procedures, functions, triggers, types. There may be others.

• Print object types

  is it possible to return and to objects of type

  I am aware of the

  If (blah instanceof string is true)

  but I would like to do something like

  System.Debug ("your object is of the type:" + blah.objectype)

  expected results would be

  is your object type: string

  the reason why I need is that I have a few cases where I think that I'm passing in the correct object types, but actions do not function to detect incorrect management of instanceof error object types.

  In my view, the objects are of the correct type, but I can't prove or disprove it.

  usually, there is the System.getObjectType () - method. But unfortunately it still does not (I know if a bug or by design).

  But you can just disconnect the object itself, and it will show you the type.

  Example (both):

  var custSpec = new VcCustomizationSpec();
  custSpec.identity = new VcCustomizationIdentitySettings();
  System.Debug (System.getObjectType (custSpec));
  System.Debug (custSpec);

  gives:

  [2011-04-29 08:33:16.664] [D] null
  [2011-04-29 08:33:16.665] [D] DynamicWrapper (Instance): [VcCustomizationSpec]-[class com.vmware.vim.vi4.CustomizationSpec] - VALUE: com.vmware.vim.vi4.CustomizationSpec@2...

  Kind regards

  Joerg

• Error of EA3 DDL generator for parameterized methods in object types

  In Data Modeling ea3 (3.1.0.691), if I use a domain on a parameter for a method attached to any type of object, the DDL generator is including the precision and scale of the data as part of the definition of parameter type. For a parameter, the data type is the only authorized party.
  
  Example, it is an error:
  
  FUNCTION MEMBER get_id
  (
  p_user_code IN VARCHAR2 (100 CHAR).
  p_short_name IN VARCHAR2 (250 CHAR)
  )
  RETURN t_standard
  AS...
  
  
  Example of this is correct:
  
  FUNCTION MEMBER get_id
  (
  p_user_code IN VARCHAR2,-no details included in the definition of data type
  p_short_name IN VARCHAR2 - no details included in the definition of data type
  )
  RETURN t_standard
  AS...
  
  This only happens when I defined the data type of the parameter with a domain name. If I use a logical data type, the generator ignore the precision and scale.
  
  Published by: Ace on January 16, 2012 16:54
  
  Published by: Ace on January 16, 2012 16:55

  Hi Scott,.

  This bug has been fixed in the Production of 3.1 version.

  David