obpasswordchangeflag not defined during the creation of the user

Similar Questions

• Element is not defined in the SESSION

  Anyone has an idea why a user of the site would get a message error "some element is not defined in the SESSION" and no one else? Whenever the user presses a page that calls a session variable from a previous page that has defined the variable, they get an error message of session. They get the same results with different browsers, IE and Firefox. ???

  The problem is solved itself. I don't know how. I scoured the user through a few test pages (which does not require a login) who comes to set a variable in session to text, and then on the next page shows the session variable. It has worked well. I thought: "maybe it has to do with the session during a connection.
  Then I put the test pages in a folder that requires a login and test pages worked. Then I had the user to access pages throwing error "undefined in session", after logging, and the error disappeared. I don't know what happened.

• iCloud backup after iOS 10 - some files were not available during the last backup

  HI - we are a company with about 350 users of iPhone and iPad.  I put this in the iCloud in the community section, but I've seen other users have the same problem in this section, so I thought I would add here.

  In order to stop users add their own e-mail accounts on the iPhone that lock us the device through restrictions - deactivation of the accounts section.  It stops and then access the iTunes settings.  In the test of iOS 10.0.1, we have one of the devices (a 16 GB 5 s, who had been a backup at 7:20 that morning), improved 9.3.2 that went well with no obvious problems, then, after a few days to leave the handset to the function, we have lifted the restriction and the backup on iCloud to find any backup not occurred since the upgrade and a message 'some files were not available during the last. backup"in its place.

  If all our staff upgrade their phones (we gave says not yet) then the backups look like they stop.  It is easy to fix, as a manual backup, will complete the process, but you have to remove the restriction to do this.

  We tested on iPhone 5, 5 s, air iPad iOS 8 to 9.3.5 and all have this problem.

  I have exactly the same problem, 16 GB iPhone 5s as well. I plan on raising at my Genius Bar appointment today.

• Alarming - alarms defined by the user not appearing is not in history

  Hello

  I use the DSC module to create alarms.  I can successfully configure an alarm for a shared variable.  I use the alarms.vi of reading to read the current alarms.   I am able to recognize and to disappear which removes them from the list.  I also see a history of them when using the "alarm and event Query.vi.  Now, I do the same with user-defined alarms.  I have created alarm using the "user defined Alarm.vi value.  The alarm are displayed in the list (read alarms.vi).  I can acknowledge the alarm and it disappears from the list.  Now when I use the 'alarm & Query.vi' the user defined alarm does not appear in the list.  Only shared variable alarms are displayed.  Is this correct?  Is there a good example of what I'm doing?  The example of "User defined DSC alarms Demo.vi" does not give an example of reading historical alarms defined by the user of the database.

  Thank you

  Matt

  I removed the DSC module and re-installed which includes SQL Server.  That did the trick.

  Thanks for your help Caleb

• vCO WebView error - parameter value is not defined in the list of the Webview attribute

  Hello

  I tried to create a simple web view for Orchestrator (5.5.1 1617127), who will present a link to launch a single workflow. I followed the instructions in the Guide of VMware and the VCO Team Blog, but both find themselves with similar errors, which seem to have a common root: it seems that the display of web pages can not read the attributes.

  On the web page, I'll see something similar to the following:

  WebView - an exception has occurred.

  Reason: WorkflowLink component error: value of the parameter "attribute" (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

  You may continue by restarting the session.

  In the server.log, I see the following: -.

  11:46:04.717 2014-10-02 + 0100 [http-bio-xxx.xxx.xxx.xxx-8281-exec-2] {} [WebviewExceptionPage] Exception Webview INFO - message:

  org.apache.hivemind.ApplicationRuntimeException: component error WorkflowLink: "attribute" parameter value (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

  The createVM attribute is set in the correct web view as an attribute with a Type of Workflow and value to create simple virtual machine. I get a similar error any attribute type I try to get out of the workflow (the example of getVirtualMachineList does not create an error on the page, but is not fill the window and creates a similar message appears in the log).

  Can someone give me directions on what to watch next? I can't find anyone else with this error, which makes me think it might be something specific to this medium, but I can't work on what it could be.

  Thanks in advance,

  Ben

  I had the time this by restarting the service after each new attribute has been added, which was far from perfect, but looking around the forums, I have seen that WebViews were being obsolete, so I'll have to look at alternatives in any case.

• My serial number is not accepted during the installation of 12 elements in Photoshop.

  My serial number is not accepted during the installation of 12 elements in Photoshop.   Answer: This serial number is not valid for Adobe Photoshop elements 12.

  You can't do that by phone, but in the link I gave, click always problems? and then chat with an Agent.

• the system configuration not saved during the last stop on the service console error

  Hello

  I m getting this msg of error on the service console

  the system configuration not saved during the last stop on the service console error

  but when I tried to run some commands s troubleshoot mode according to the vmware esxcfg-boot - b, esxcfg-boot - p I got an error message like

  bad interprator usr permission denied

  I guess you follow this KB: http://kb.vmware.com/kb/1002503

  But seems like you have file system errors.

  Try to restart your system in init 1

  Then use fsck command to check your ext3 file system (remember that the file systems are not in use and use the - f option).

  André

• Not able to deploy Applications: "the process is not defined in the descriptor.

  All the

  I have a pretty serious problem here to try to take a LCA of an environment and get in another environment.  Source and destination environments are LCES 2.5 (LCES 2 with Service Pack 2).  I have about 6 applications and there are a few extreme dependencies (one application that refers to an asset from another application) are.  I took a STROKE of all these applications in the environment of the source and ACL matter perfectly in the destination environment, but I am unable to deploy one of the applications that have extreme dependencies.  The error that I always get when I try to deploy any application that has an extreme addiction is:

  [Process name] otherwise is not defined in the descriptor.

  I tried all of the following conditions:

  (1) combined 1 LCA applications

  (2) taking several local calling areas where each ACL contains only a single request

  (3) taking several local calling areas where each LCA includes an application as well as all the extreme dependencies for this application

  No matter what I try, they deploy.  I can import the LCA and I can get the apps in the Workbench and play with them, but they do not deploy everything simply.  I also tried to manually set all the groping in the processes themselves, but that does not work either.

  Any help would be appreciated.

  I wanted to just follow the solution to my problem.

  It seems centres issue around distant circular dependencies.  In general, it seems that LiveCycle choke when two applications of each reference to another.  Note that I'm not talkinng on the true circular referencing here in which a process in the references of the application has an application B while this process refers to the initial process request.  Indeed, although I have not tested recently, I believe that LiveCycle can actually catch this kind of question.  I'm talking about circular dependencies of distant is simply when a process requests was (let's call it a1) refers to a process in application B (let's call b1) while a process in application B (call the b2) refers to a process in applicatoin has (let's call a2).  Apparently, this type of circular reference causes the deployment of applications of such choke.

  The fix was painful because I had to manually delete all distant dependencies of these two application, deploy these two requests to get in the long term and then implement these dependencies again.

  Now it seems preferable to never have 1 direction of the dependencies for any application.

• Perl not defined to the Oracle Applications environment. (Libraries T2K not in INC.

  Hello
  
  Am getting the following error when applying patches autoconfig.
  
  $FND_TOP/patch/115/bin/txkprepatchcheck.pl
  Perl not defined to the Oracle Applications environment. (Libraries not in the INCLUSION list T2K)
  Make sure that automatic configuration was performed and found a source correctly your environment.
  /U01/tech/appl/FND/11.5.0/patch/115/bin/txkprepatchcheck.pl line 131.
  BEGIN failed--compilation missed the line 141 /u01/tech/appl/fnd/11.5.0/patch/115/bin/txkprepatchcheck.pl

  Fine.

  (1) source the environment file
  (2) make sure that 'APPLRGF' variable is set in the environment. If this isn't the case, set it to the same value as "APPLTMP".
  (3) in the place where this patch was unzipped, patch_top/patchnumber/fnd/patch/115/bin.

  Run the utility as follows:

  Platform command line

  UNIX or Linux (must be a single line)
  ./txkprepatchcheck.pl-script = ValidateRollup-outfile = $APPLTMP/txkValidateRollup.html - appspass =

  do not FND_TOP/patch/115/bin

• DSN of ELEMENT not defined in the APPLICATION scope

  DSN of ELEMENT not defined in the APPLICATION scope
  
  
  Hi, I'm new to see my problem is as follows:
  
  I have 2 files:
  
  application.cfm that is inside
  d:\inetpub\wwwroot\mysite\
  
  and
  
  hand. CFC
  (d:\inetpub\wwwroot\mysite\cfc)
  
  inside of application.cfm I set an application variable:
  < cfset Application.DSN = "mydb" >
  (and connections mydb works if they are tested in coldfusion administrator)
  
  inside the main.cfc, I use the application variable:
  
  < cffunction = 'getLogin' access returntype = name "remotely" = "struct" output = "true" >
  < name cfargument = "nickname" type = "string" required = "true" >
  < name cfargument = "password" type = "string" required = "true" >
  < cfset returnedValue = structNew () >
  < name cfquery = "q_getLogin" datasource = "#application. DSN #">"
  SELECT id, nickname
  to allieve
  etc...
  
  ..
  < cfreturn returnedValue >
  < / cffunction >
  
  I call the SWC from flash, and I get the DSN of ELEMENT error undefined in APPLICATION scope.
  Someone has an idea of what could be bad?
  Thanks in advance,
  Mitja

  Not sure now why doesn't he call application.cfm, but my solution to CF6 time should include the application.cfm within my CFC... you can add a cfinclude within the item, on the very top, not inside any function... every time that Flash calls the CFC this code will be executed before the function call.
  If this component is also used by CF, then you can wrap which include in a conditional... You can check application.applicationName...
  HTH

• RADIOV element is not defined in the FORM

  Hello
  I have this.
  I want to insert values such as blue, yellow or red
  in the field of database col_Radio.
  
  what I have to change to make it work?
  
  Thank you
  
  ERROR:
  
  RADIOV element is not defined in the FORM
  
  Exceptions
  
  15:53:22.022 - term Exception - in C:\CFusionMX7\wwwroot\ACT_inputcolor.cfm: line 10
  RADIOV element is not defined in the FORM.
  
  Note: line 10 is "#Trim (Form.RADIOV), #
  
  --------------------------------------------------------
  
  What I need to change to the radiov element to define or is this the only mistake?

  In other words, the FORM variable name must be identical to yourname of the field.

  When you submit your form, this
  

  Becomes
  #FORM.group1 #.

• defined by the user is not displayed correctly the variables

  Hello, I use the variables defined by the user in Adobe Captivate 9. I am having the users to enter text in a text box entry, then view their entry on another slide. When I test the project the user defined variable displays only partially what I have typed in the text entry box. Someone at - it solutions?

  You must do so via the properties panel.

  

  See you soon... Rick

• Variables, FPGA, defined by the user and SoftMotion 2012 + NOR 9505

  Hello

  To http://forums.ni.com/t5/Motion-Control-and-Motor-Drives/Softmotion-and-NI-950X-Module-Compatibility/... Nathan says:

  NathanK wrote:

  The glue code that connects Softmotion on FPGA LV code RT is called 'the axis interface. The version of the interface of the 2011 Softmotion axis necessary creation screw RT that exposes certain capabilities to Softmotion.

  ....

  Improvements have been made in 2012 Softmotion who has removed the requirement to write RT live. Disclosure for the FPGA happens rather on the Variables (UDVs) user-defined. It is also possible to create a kind of axis 9501 for configuration of the module as well as an axis UDV generic for other completely custom 950 x modules or axes. It is not a specific example for the 9505 yet.

  This caught my attention, as I'm trying to develop a system using LabVIEW SoftMotion 2012 and the NI 9505. I'm curious to see if there are alternative methods to write my application.

  Where can I find more information on this 'generic UDV axis' and how to implement a? Nathan says "is not a specific example for the 9505 yet", but there are examples for the other modules - how similar/different are these modules from the 9505, and it involves a lot of effort to bring examples of the 9505?

  Thank you!

  Hi JKSH,

  I have some relevant information that it is request that may be useful:

  Working with Axes Variable defined by the user (NI SoftMotion Module)

  Resource binding dialog box (NI SoftMotion)

  Configuration OR SoftMotion Axes (OR SoftMotion Module)

  Example that mentions of Nathan is the drive Stepper (9501) .lvproj (material Input and Output"Motion Control" NI SoftMotion"Device Specific" NI 950 x"OR 9501), I would take a peek at this on use of the UDVs.

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Display multiple lines of data collection defined by the user in an e-mail message

  I created a collection defined by the user that displays several lines of data. I created a custom rule and have linked this collection set by the user to this rule and configure an e-mail action. Variable Seveity, I have defined it in the rule to contain the column values. But it will only contain the first line of data. How can I display multiple lines of data in the alarm itself as well as the e-mail? Any help is appreciated.

  The example query in the collection defined by the user is less;

  Select the type, status, queuename, count (*) from PSAPMSGPUBHDR

  Union

  Select the type, status, queuename, count (*) from PSAPMSGPUBCON

  Union

  Select the type, status, queuename, count (*) from PSAPMSGSUBCON

  Result:

  Number of status type Queuename

  -------                 ----------------------                        ----------                           -------------

  HDR profil_utilisateur error 1

  PUB                  PERSON_BASIC                    New                                 4

  PUB WORKFORCE_SYNC error 1

  -3 rows

  I have defined the variables of gravity and the alarm message is something like this; (It is fetching only the first row of data) how do I loop through to get all the rows of data and display it in the message of alarm/email (alert) action must be written of the groovy script code to achieve this goal? If Yes can you please provide me examples?

  Alarm message:

  "Request message queue is:

  Type: @UDC_type

  QueueName: @UDC_queuename

  Status: @UDC_status

  County: @UDC_count

  Thanks in advance

  JAI

  Hi Jay,.

  fine I could help you. Please mark the thread as "Answered" when the issue has been resolved and do not hesitate to open a new thread for questions.

  Concerning

  Jochen