Obtaining object with GObject Refnum values

Similar Questions

• The call for objects with specific CMYK values?

  Hello

  I'm trying to create a script that seeks paths that have specific CMYK values within a document and then changes the opacity of this path. I can clarify that he only looks for objects that have a CMYK color, but not getting anything once I have try to specify CMYK values, that I'm looking.

  In addition, should I specify that the output will be a "new CMYKColor", or is it sufficient to say "paths [i].fillColor.back = 100.0", for example, in the output. Here's what I have for this particular function:

  var docRef = app.activeDocument; 
  var paths = docRef.pathItems; 
  
  for (i=0; i< paths.length; i++) {
  
  if (paths[i].fillColor.typename == "CMYKColor" ) {
  
  if (paths[i].fillColor.cyan == 0.0 &&
  paths[i].fillColor.magenta == 0.0 &&
   paths[i].fillColor.yellow == 0.0 &&
   paths[i].fillColor.black == 20.0 &&
   paths[i].opacity == 100.0) {
  
  var NewColor = new CMYKColor ();
  
  NewColor.cyan = 0.0;
  NewColor.magenta = 0.0;
  NewColor.yellow = 0.0;
  NewColor.black = 100.0;
  paths[i].opacity = 20;
  }
  
  else {
  alert ("Object(s) not recognized.")
  }
  
  }
  else {
  alert ("Object not CMYK.")
  }
  }
  

  Thank you.

  Hi Silly-V,

  No, it's isn't weird.

  Illustrator is a bit crazy. Most of the values should be rounded off during playback. (as in this thread: Re: working on a script that will add a new work plan and remove the old if it is not a specific size)

  And if Luis Oyola can do something like this:

  var docRef = app.activeDocument;
  var paths = docRef.pathItems;
  
  for (i=0; i< paths.length; i++) {
      if (paths[i].fillColor.typename == "CMYKColor" ) {
          if (Math.round(paths[i].fillColor.cyan) == 0.0 &&
              Math.round(paths[i].fillColor.magenta) == 0.0 &&
              Math.round(paths[i].fillColor.yellow) == 0.0 &&
              Math.round(paths[i].fillColor.black) == 20.0 &&
              Math.round(paths[i].opacity) == 100.0) {
                  paths[i].fillColor.black = 100;
                  paths[i].opacity = 20;
                  } else {
                      alert ("Object(s) not recognized.");
                      }
                  } else {
                      alert ("Object not CMYK.");
                      }
                  }
  

  Have fun

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• Table with list of value to load on another value of the column that is never changed by the user

  Nice day!

  I work with JDeveloper 11.1.2.4.

  I have a Table of the ADF that has 4 lines.  Each row has a column with a unique value.  The plan should include a LOV column in the row show a different list of values based on a single column value.  I have install the list of values, use a display with a variable binding criterion.  When you create the data LOV source, I Specifies the name of a single column for the value of the bind variable.  However, it seems that the LOV changes none selecting different lines.

  Is there a good way to handle this?  I did LOVs of person in charge in the past, but this isn't quite the same as the user can view only the value that depends on the LOV on.

  Any suggestions are greatly appreciated!

  
  BradW

  Hey, it's always a case of use of the dependent list of values. If the attribute that you bind the bind variable view criteria at part of the view object then the value LOV to be examined accordingly. I did a quick test case and I see my lists filtered by an attribute in line (I used the HR schema and posted employees as candidates managerId. The employee list is filtered so that it only shows the employees in the same Department that the employee I want to put a new managerId on) Frank

• After Effects CS5.5 - rotating objects with precision?

  I searched throughout the day for an answer to this simple question and I keep finding the same answers that do NOT answer this question very simple: How to use the tool rotation accurately?  In other words, how can I make a perfect 90 degree rotation? How can I know what degree of rotation, I do?  There is nothing obviously followed rotations - I can't find anything that tells me what kind of rotation I do.  It's the most stupid thing, and I'm sure that I'm the fool who cannot see what is right in front of her, but I can't do accurate rotations.  It's 90 degrees?  It is 45?  23?  I have no idea.  And I'm really, really frustrated.  No more frustration.  I got to swear my head, actually.  I'm not necessarily talking 3d space (although it's me puzzled, also).  I speak "in 2d space general."  HOW TO ROTATE AN OBJECT WITH A SPECIFIC ROTATION ANGLE?  I played the guessing game and my project looks like garbage because none of the rotations are accurate.  Seriously, why DEVIL is something so damned hard to find? 

  Thank you.

  Display the Rotation property in the timeline panel. Enter any value you want.

  Using After Effects | The layer properties

• Place the missing documents in the list of records with a rank value

  Hi all
  
  I have this table:
  

  WITH taba AS (SELECT 99 AS id,
                       '2011-08-08' AS date_ini,
                       10 AS VALUE,
                       1 AS RANK
                  FROM DUAL
                UNION ALL
                SELECT 99 AS id,
                       '2011-09-08' AS date_ini,
                       11 AS VALUE,
                       2 AS RANK
                  FROM DUAL
                UNION ALL
                SELECT 99 AS id,
                       '2011-10-08' AS date_ini,
                       10 AS VALUE,
                       4 AS RANK
                  FROM DUAL
                UNION ALL
                SELECT 999 AS id,
                       '2011-08-08' AS date_ini,
                       10 AS VALUE,
                       1 AS RANK
                  FROM DUAL
                UNION ALL
                SELECT 999 AS id,
                       '2011-09-08' AS date_ini,
                       10 AS VALUE,
                       2 AS RANK
                  FROM DUAL
                UNION ALL
                SELECT 999 AS id,
                       '2011-10-08' AS date_ini,
                       10 AS VALUE,
                       3 AS RANK
                  FROM DUAL
                UNION ALL
                SELECT 9999 AS id,
                       '2011-08-08' AS date_ini,
                       10 AS VALUE,
                       2 AS RANK
                  FROM DUAL
                UNION ALL
                SELECT 9999 AS id,
                       '2011-09-08' AS date_ini,
                       15 AS VALUE,
                       3 AS RANK
                  FROM DUAL
                UNION ALL
                SELECT 9999 AS id,
                       '2011-10-08' AS date_ini,
                       10 AS VALUE,
                       4 AS RANK
                  FROM DUAL)
  SELECT *
    FROM taba

  And I need to return the same results but with the addition of records that have no rank. For new records the VALUE must always be zero (0) and the value of DATA_INI must have the same value as the order of the records immediately following. Just like that:

  99       2011-08-08     10     1
  99       2011-09-08     11     2
  *99       2011-10-08     0     3*
  99       2011-10-08     10     4
  999      2011-08-08     10     1
  999      2011-09-08     10     2
  999      2011-10-08     10     3
  *9999     2011-08-08     0     1*
  9999     2011-08-08     10     2
  9999     2011-09-08     15     3
  9999     2011-10-08     10     4

  I can do this using a loop procedure, but I want a filter query. ;)
  
  Thanks in advance.
  Filipe Almeida

  Hi, Felipe,.

  So, you want multiple copies of a few lines. In other words, if a value or rnk (RANK is not a column name right) is missing in a given id you want to with the next highest rnk and the same id line repeated 2 or maybe even several times. All copies will be identical, except that rnk will have the missing numbers, and the value will be 0 on all additional copies.

  A way to do that is to join your table (or something very similar to it, as in the example below) to a Meter of Table , which is a table (or a result set, in this example) counts 1, 2, 3,... up to however many copies may be required.

  WITH     got_rows_needed          AS
  (
       SELECT     id, date_ini, value, rnk
       ,     rnk - LAG (rnk, 1, 0) OVER ( PARTITION BY  id
                                              ORDER BY          rnk
                              )         AS rows_needed
       FROM    taba
  )
  ,     cntr               AS
  (
       SELECT     LEVEL - 1     AS n
       FROM     (
                 SELECT     MAX (rows_needed)     AS max_rows_needed
                 FROM     got_rows_needed
            )
       CONNECT BY     LEVEL <= max_rows_needed
  )
  SELECT    r.id
  ,       r.date_ini
  ,       CASE
            WHEN  c.n  = 0
            THEN  r.value
            ELSE  0
           END               AS value
  ,       r.rnk - c.n          AS rnk
  FROM       got_rows_needed  r
  JOIN       cntr             c     ON  c.n  < r.rows_needed
  ORDER BY  id
  ,            rnk
  ;
  

  By elsewhere, store date information in a VARCHAR2 column, such as date_ini, is a very bad idea. Use a DATE column.

  Published by: Frank Kulash, August 8, 2012 11:02

  RANK is a keyword from Oracle. (It is the name of a built-in function). If you specify your own columns of RANK, it will confuse people reading the code, and it can result in compiler errors, too.
  ID is also an Oracle keyword. To be sure, you can use another name, such as grp_id, instead of id.
  It is best not to name your own objects with any name of fArrondi in v$ reserrved_words.keyword.

• Select all the objects with 2pt STROKE?

  It is possible to select all objects with a particular characteristic, such as a specific line width? I know I can do this by selecting an object, and then choose Select all. But I want to include as part of a batch action, so I need to be able to specify the choice so that it can be completely automated. If I have to choose one of the objects for each file, it defeats the purpose of the action of batch processing.

  If this is not possible, I should ask in the forum script to help a script?

  NW

  With nothing selected, the value of the weight of the 2pt race. Now select > same > weight of the race.

  Set the weight of the race is registrable and if nothing is selected, then select it > same commands using what is defined in the panels.

• ComboBox - updated database with the ID associated with the selected value

  Hello, first off I am a newbie to developing Flash Builder with PHP, so any help would be mucho appreciated.

  I want to update my database with an id associated with a seletcted value in a combobox

  -I'll create a combox and asociate to a data service that retrieves all possible values

  -With the help of selectedItem, I'm able to the value of the ComboBox to the value associated with the default data object

  -To submit, I want to update the database, not with the value directly, but with its associated id.

  -The list of values are a list of locations with a specific id.

  Here is my code

  ComboBox on a form

  "" < s:Form includeIn = "LocationAdd, LocationUpdate"x ="52" y ="320" defaultButton = "auLocnBtn{}">

  "< s:FormItem label = 'provider ID" "" >

  "" < s:ComboBox id = "spidComboBox" selectedItem ="locations.snam{}" includeIn = "LocationUpdate'x ='97" y ="539"

  creationComplete = "comboBox_creationCompleteHandler (event)" labelField ="name" > ""

  " < s:AsyncListView list =" getSplResult.lastResult{}"/ > "

  < / s:ComboBox >

  < / s:FormItem >

  " < s:Button id ="auLocnBtn"label ="Submit"click ="auLocnBtn_clickHandler (event)"label. LocationUpdate ="Update"tag. LocationAdd ="Add"/ > "

  < / s:Form >

  protected function auLocnBtn_clickHandler(event:MouseEvent):void

  {

  Locations.SPID = parseInt (spidComboBox.selectedItem);

  updateLocationResult.token = locationService.updateLocation (rentals);

  }

  This code will move to the selected item, in this case locations.snam. However, getSpl returns two fields - name and id. I want id associated with locations.snam to use to update the database.

  Do this in php and html is really straight forward, because there is a < value > property that allows me to pass the ID. Something similar in flash builder? I spent hours on this... Please don't laugh, I said I was new on FB!

  See you soon,.

  Brian

  Okay understood outside, what I had to do was

  protected function auLocnBtn_clickHandler(event:MouseEvent):void

  {

  Locations.SPID = parseInt (spidComboBox.selectedItem.spid);

  }

  that is the reference object properties... FB with PHP is great!

  This can be closed.

• show/hide the object with the text box

  Hello world

  has obtained a display code and masking of an object with a button and it does not work well. This is the code

  function show_hide_image1(evt:MouseEvent):void {}

  Image1.visible =! Image1.visible;

  }

  Enterbtn.addEventListener (MouseEvent.CLICK, show_hide_image1);

  Now, got another code with a box of password who send me on different Label based on what is in it. There is the code.

  Enter.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);

  function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void

  {

  If (Passwordbox.text == "cryocath") {}

  gotoAndStop ("cryocath");

  } Else if (Passwordbox.text == "54321") {}

  gotoAndStop ("A54321");

  } Else if (Passwordbox.text == "123456789") {}

  gotoAndStop ("A123456789");

  } else {}

  Stop ('error')

  }

  }

  Now, my question is, I want to introduce my hide/show code this code but do not understand how to do it. What I want is that if I enter my Passwordbox, my "image1" show/hide object "image1". If I get "image2", my "image2" show/hide object. Can someone help me with this? TNX

  :

  Enter.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);

  function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void

  {

  {if (this [PasswordBox.Text])}

  This [PasswordBox.Text] .visible =! this [PasswordBox.Text] .visible;

  }

  If (Passwordbox.text == "cryocath") {}

  gotoAndStop ("cryocath");

  } Else if (Passwordbox.text == "54321") {}

  gotoAndStop ("A54321");

  } Else if (Passwordbox.text == "123456789") {}

  gotoAndStop ("A123456789");

  } else {}

  Stop ('error')

  }

  }

• Flattening of an object with a race created to fill shifts. Not good.

  Flattening or enlarge an object with a padding of race creates the filling negatively offset half the distance of the sketch of the race.

  Flattening or enlarge an object with an outside boundary creates the fill positively offset the distance of the sketch of the race.

  Flattening or enlarge an object with an indoor or outdoor race creates the negative fill offset half the distance of the plan inside of race.

  Why is this? This is a provision of trapping?

  Can I change the default values in expansion?

  Apply the effect > path > hierarchical object to filling before developing

• AppleScript: Delete object with properties...

  Hi all

  I got myself in a little trouble by altering an incredibly huge amount of InDesign files (11 000 +) with an Applescript script which was perfect, except for one small detail: it dissociated object on each file that was supposed to be a group.  Overall, the object had a script titled name while he was easy to talk to:

  Tell application "Adobe Indesign CS3" to remove the item from the page "Logo1' of 1

  But now that the grouped objects that once formed "Logo1" have been separated, I desperately trying to find a way to talk to these individual pieces so that I can either 1) remove them and stick it on a new "Logo1" from a library or 2) regroup the pieces and the re-script label of the group.  I tried is to find a property to each piece that is unique to this track... as if it was geometric limits or its vertical or horizontal scale and collect the coins in this way and group together them.

  In any case, here's my dillemma... I think I can find all the solutions I mentioned above, if I could just find a way to talk to an object with properties "xyz".  For the life of me, I can't get a script to compile!  This is one of my attempts:

  say application «Adobe InDesign CS3»

  pourla object with the properties the value {geometric limits: {0.432707105106, 0.224614903901, 0.205992407304, 0.491034738695}}

  end tell

  I feel a little lame get hooked to something that seems so simple, but what IS my purpose?  I tried to talk with 'object', 'polygon', 'rectangle', etc.  How in the world can talk to an object that is not a "name" but it has some properties I know?

  Any help will be greatly appreciated!  .. like really, really enjoyed. Thank you!

  You're after something like:

  point page 1 whose geometric limits = {0.432707105106, 0.224614903901, 0.205992407304, 0.491034738695}

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• Do not display the SVG objects with the effect of filter &lt; feSpecularLighting &gt;

  When I open a file Scalable Vector Graphics (.svg) in Firefox, all objects with filters that contain the < feSpecularLighting > filter primitive, are not displayed at all, and in rare cases, even cause Firefox crashes.

  For example:

  • http://upload.wikimedia.org/Wikipedia/Commons/e/EE/Video_game_health_bar.svg

  It must be rendered like this:

  • http://upload.wikimedia.org/Wikipedia/Commons/thumb/e/EE/Video_game_health_bar.svg/3000px-Video_game_health_bar.svg.PNG

  In order to get the SVG file to render as PNG, you must edit kernelUnitLength of 0.01 to about 1.0 (or delete). Don't know if something might have changed in the way Firefox handles this attribute to cause such a radical difference.

  I should test in a clean profile to see if I get the same result...

  Edit: Same result in a clean profile, i.e. without extensions or changes to the default factory settings.

• by using a structure of the event to restore a Boolean control with change in value for the menu ring

  I'm trying to get two Boolean buttons to reset when the value of a ring menu.  For this I use a structure of event defined to execute with a ring value change.  However I have another code that should be run while the structure of the event expected to change value.  I place my structure of the event inside the while loop buttons reset as expected but my other code is not run (except when the value of change). If I place it outside the loop the rest of functions code as expected, but the buttons do not reset.  Any help you offer is much appreciated.

  Hello

  ADD TIME OUT EVEN AND GIVE DELAY OF 100 MS.

  Adds the case-application-timeout event

• Read byte with a value up to 127 lire byte with an ASCII value greater than 7F (127 dec)

  Hello

  I have to read a byte with a value greater than 127, Labview turn 27.

  In help I saw that Labview provides a description of ASCII that pour values ranging up to ' 127.

  What do I need to do?

  LabVIEW 6.1

  Windows XP

  Hello

  I want to read a byte with a maximum value of 127, but Labiew reurn arround 27 value

  How do I do?

  

  Rigid wrote:

  Thanks for your help. I'm not changing lyke I understand (my English is poor quiet...)

  I have another program that communicate with the instrument. I know byte (6) must be greater than 18 (greater than 7F actually).

  But with Labview, I'm only 18.

  While it might be higher than 18 x, an I8 is signed, and therefore it cannot be greater than x7F - it has a range of-128 to 127. A U8 is not signed, and it's why he has a range from 0 to xFF. However, x 18 is the same if you treat as signed or not signed. I don't see how LabVIEW can read a wrong value on the serial port. Are you sure you're looking at the correct byte? Your code shows that you split the chain twice. Are you sure that you do this properly?

  Given that you use on Windows you can recheck the chain received using PortMon. Allows you to see what is actually received by the driver for the serial port on Windows.

  P.S. I actually meant the whole byte function.