The call for objects with specific CMYK values?
Hello
I'm trying to create a script that seeks paths that have specific CMYK values within a document and then changes the opacity of this path. I can clarify that he only looks for objects that have a CMYK color, but not getting anything once I have try to specify CMYK values, that I'm looking.
In addition, should I specify that the output will be a "new CMYKColor", or is it sufficient to say "paths [i].fillColor.back = 100.0", for example, in the output. Here's what I have for this particular function:
var docRef = app.activeDocument; var paths = docRef.pathItems; for (i=0; i< paths.length; i++) { if (paths[i].fillColor.typename == "CMYKColor" ) { if (paths[i].fillColor.cyan == 0.0 && paths[i].fillColor.magenta == 0.0 && paths[i].fillColor.yellow == 0.0 && paths[i].fillColor.black == 20.0 && paths[i].opacity == 100.0) { var NewColor = new CMYKColor (); NewColor.cyan = 0.0; NewColor.magenta = 0.0; NewColor.yellow = 0.0; NewColor.black = 100.0; paths[i].opacity = 20; } else { alert ("Object(s) not recognized.") } } else { alert ("Object not CMYK.") } }
Thank you.
Hi Silly-V,
No, it's isn't weird.
Illustrator is a bit crazy. Most of the values should be rounded off during playback. (as in this thread: Re: working on a script that will add a new work plan and remove the old if it is not a specific size)
And if Luis Oyola can do something like this:
var docRef = app.activeDocument; var paths = docRef.pathItems; for (i=0; i< paths.length; i++) { if (paths[i].fillColor.typename == "CMYKColor" ) { if (Math.round(paths[i].fillColor.cyan) == 0.0 && Math.round(paths[i].fillColor.magenta) == 0.0 && Math.round(paths[i].fillColor.yellow) == 0.0 && Math.round(paths[i].fillColor.black) == 20.0 && Math.round(paths[i].opacity) == 100.0) { paths[i].fillColor.black = 100; paths[i].opacity = 20; } else { alert ("Object(s) not recognized."); } } else { alert ("Object not CMYK."); } }
Have fun
Tags: Illustrator
Similar Questions
-
What is the problem with the conversion of objects with gradients to the gradient mesh?
What is the problem with the conversion of objects with gradients to the gradient mesh?
Radial gradients are special, and it could become difficult edit the gradient mesh resulting.
Take the layer apnel and inspect your objects. You will find a clipping mask the cracks inside.
-
Calls for Freeway with the required forced authorization code does not work.
Hi all!
I have implemented a collaborative edge Expressway, seems to work fine, except for calls limited requiring a forced authorization code.
If I connect to the local network (with Jabber, of course) I have no problem for any call restricted or unrestricted, but if I connect outside my firewall (using my expressway) I can't make tight calls, only unrestricted calls. In the jabber never complete call Office and in the jabber for android or iPhone the call drop instantly.
TTE termination reason code is "(3) no route to the destination.» The user to call can not be reached, because the network serving the called user is unreachable.
any idea?
CUCM 10.5
vcsce & vcs - c 8.2.1
Jabber version (one more for Iphone, android, mac and windows)
Hello
I am facing the same issue.
How you solved the problem?
Kind regards
-
Recovery process of the BIOS for HP with AMI BIOS systems?
Hello
I'm trying to fix a HP model a6718uk PC that has a motherboard M2N78 - LA and i think and AMI BIOS. An update of the BIOS that came through HP Update failed, and the machine does not start.
As it is out of warranty, the HP repair center want to £200.00 to solve this problem, although a simple BIOS recovery process should be enough - does anyone know the process for these systems BIOS recovery? Everything I've read (not specific to these commissions) says that you should be able to update the BIOS (called AMIBOOT. ROM) on a diskette, CD or USB memory stick and start by pressing Ctrl-Home and it will perform the recovery, but I was not able to get this to work successfully. HP provide a stand-alone update, so I extracted the file to update the SP.exe BIOS on the HP support site.
Any help would be most appreciated!
See you soon,.
Andrew
Hi André,.
I wonder if HP change bootlock bios and it does not seek to the AMIBOOT.ROM. It may be interesting to try AMIBOOT. BIN just in case.
The link below is a link to a free hex editor, open the bios with this file and you should be able to see the extension will look for the bios.
http://www.hhdsoftware.com/free-hex-editor
Best wishes
David
-
LOV depending on the separate View object with ViewCriteria
Hello
I use JDev 12.1.3. My use case is the following - I've simplified as much as I can. I insert and update the SFGroupUser table, but I want the LOV to the UserID field be limited to only the users that are connected to today's society through the SFCompanyUser table. Here is the structure of the table:
The key point is that when you assign users (SFUser) (SFGroup) groups in the SFGroupUser table, not all users may be assigned to a group because the groups are part of the business and the users are associated with one or more companies. Could not assign a user to a group that belongs to a company that the user is not assigned to. If GroupID 1 belongs to CompanyID 1 and 1 UserID is also assigned to number 1 in the SFCompanyUser table, then Pseudo1 can be assigned to GroupID 1.
In my ADF application, I created the entity objects and visualization of objects for all tables and all associations and links. I configured the perspective in the AppModule have a master relationship / detail like this:
In the SFGroupUserView I put in place a LOV to the UserID field. Is this LOV I want to limit just users who are assigned to the current society (the master of the relationship master / detail). It is possible to limit the LOV uses a separate view object, in this case a SFCompanyUser based, where society is today's society?
I worked with a view read-only as the LOV object. This VO joins SFCompanyUser and SFUser and has a view with a parameter of binding criteria for the CompanyID information. It seems that it is the way to go, but I do not see how to assign the current CompanyID to the variable binding.
Another point. I read different things, including corner Code article http://www.oracle.com/technetwork/developer-tools/adf/learnmore/44-restrict-lov-169186.pdf of Frank Nimphius. In this article, it updates a variable binding in a listener of the popup. I would like to have all the logic to stay in business if possible components. The idea is that the JSF page displays data controls in the form of a table of editable with a menu item drop-down selectOneChoice.
Kind regards
Steve
I solved my problem. The precious documentation carried out since the development of the Fusion of Web Applications with document Oracle Application Development Framework in section 5.12, in particular section 5.12.2 - How to define cascading lists LOV-Enabled view object attributes: https://docs.oracle.com/middleware/1213/adf/develop/adf-bc-vo-queries.htm#ADFFD349.
Using a view criteria named in the view LOV object was correct. When the attribute of username in the SfgroupuserView view object has been configured to use the LOV, a view accessor was created for the SfgroupuserView. The accessor view points to the LOV view object. Edition of the accessor of view I said to use the criteria of view named object View LOV. The problem was that the ID of the company in the main table (sfgroup) was not an attribute of the SfgroupuserView view object, so I was not able to assign a value to the variable binding. So, I added the entity sfgroup as one of the entities that the SfgroupuserView was based on and then added the companyID attribute. I then used the new attribute companyID as the value to be assigned to the variable binding, the criteria of display for the view LOV object in view accessor.
Now, everything works well in the AppModule. When you insert a new record in SfgroupuserView1 the user's selection is a drop-down list that displays only users assigned to today's society.
-
I'm content Chair EMP/BI for the Kscope16 Conference in Chicago. I would like to publish a call for contributions in the concerned areas.
It of nothing that specifically prohibits this as far as I can see in the rules, FAQ or rules of conduct documents. The moderators have no problem with that? I don't really want to have my deleted messages simultaneously in eight areas and become a topic of conversation in the mod space...
I do not think that a post from me on OTN involves any kind of support of the Oracle, but for what is interesting (and for those who don't know) Kscope is a 100% Oracle conference that enjoys the support of several "branches" of Oracle, OTN no less.
I post here in order to achieve the OTN community managers (moniquevdb-Oracle, Laura Ramsey-Oracle and so on) for an 'official' answer and not to interview all the members, and very respectfully, I ask that someone don't not corresponding to the old description that wants to offer an opinion in a separate discussion. I'm sure that won't work.
Thanks for your time.
Product areas would not be the right place for this, but we can probably find a reasonable way to publish a call for contributions in a general area. I added you as a friend if you can me message directly. In the meantime I'll connect with Hocinebelatreche-Oracle and Oracle-valeriesimpson to make a recommendation.
-
Place the missing documents in the list of records with a rank value
Hi all
I have this table:
And I need to return the same results but with the addition of records that have no rank. For new records the VALUE must always be zero (0) and the value of DATA_INI must have the same value as the order of the records immediately following. Just like that:WITH taba AS (SELECT 99 AS id, '2011-08-08' AS date_ini, 10 AS VALUE, 1 AS RANK FROM DUAL UNION ALL SELECT 99 AS id, '2011-09-08' AS date_ini, 11 AS VALUE, 2 AS RANK FROM DUAL UNION ALL SELECT 99 AS id, '2011-10-08' AS date_ini, 10 AS VALUE, 4 AS RANK FROM DUAL UNION ALL SELECT 999 AS id, '2011-08-08' AS date_ini, 10 AS VALUE, 1 AS RANK FROM DUAL UNION ALL SELECT 999 AS id, '2011-09-08' AS date_ini, 10 AS VALUE, 2 AS RANK FROM DUAL UNION ALL SELECT 999 AS id, '2011-10-08' AS date_ini, 10 AS VALUE, 3 AS RANK FROM DUAL UNION ALL SELECT 9999 AS id, '2011-08-08' AS date_ini, 10 AS VALUE, 2 AS RANK FROM DUAL UNION ALL SELECT 9999 AS id, '2011-09-08' AS date_ini, 15 AS VALUE, 3 AS RANK FROM DUAL UNION ALL SELECT 9999 AS id, '2011-10-08' AS date_ini, 10 AS VALUE, 4 AS RANK FROM DUAL) SELECT * FROM taba
I can do this using a loop procedure, but I want a filter query. ;)99 2011-08-08 10 1 99 2011-09-08 11 2 *99 2011-10-08 0 3* 99 2011-10-08 10 4 999 2011-08-08 10 1 999 2011-09-08 10 2 999 2011-10-08 10 3 *9999 2011-08-08 0 1* 9999 2011-08-08 10 2 9999 2011-09-08 15 3 9999 2011-10-08 10 4
Thanks in advance.
Filipe AlmeidaHi, Felipe,.
So, you want multiple copies of a few lines. In other words, if a value or rnk (RANK is not a column name right) is missing in a given id you want to with the next highest rnk and the same id line repeated 2 or maybe even several times. All copies will be identical, except that rnk will have the missing numbers, and the value will be 0 on all additional copies.
A way to do that is to join your table (or something very similar to it, as in the example below) to a Meter of Table , which is a table (or a result set, in this example) counts 1, 2, 3,... up to however many copies may be required.
WITH got_rows_needed AS ( SELECT id, date_ini, value, rnk , rnk - LAG (rnk, 1, 0) OVER ( PARTITION BY id ORDER BY rnk ) AS rows_needed FROM taba ) , cntr AS ( SELECT LEVEL - 1 AS n FROM ( SELECT MAX (rows_needed) AS max_rows_needed FROM got_rows_needed ) CONNECT BY LEVEL <= max_rows_needed ) SELECT r.id , r.date_ini , CASE WHEN c.n = 0 THEN r.value ELSE 0 END AS value , r.rnk - c.n AS rnk FROM got_rows_needed r JOIN cntr c ON c.n < r.rows_needed ORDER BY id , rnk ;
By elsewhere, store date information in a VARCHAR2 column, such as date_ini, is a very bad idea. Use a DATE column.
Published by: Frank Kulash, August 8, 2012 11:02
RANK is a keyword from Oracle. (It is the name of a built-in function). If you specify your own columns of RANK, it will confuse people reading the code, and it can result in compiler errors, too.
ID is also an Oracle keyword. To be sure, you can use another name, such as grp_id, instead of id.
It is best not to name your own objects with any name of fArrondi in v$ reserrved_words.keyword. -
Replace the screen for one with a higher resolution on Satellite P850-12Z
Hi all
I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].
Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?
I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.
I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.
Thank you in advance.
Hello
Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.
All this is quite complicated.
-
Call for email with attachment - broke up with 10.2?
The following used to work properly on 10.1, but on 10.2, the call fails.
attachedObjects: [ Invocation { id: emailQuery query { invokeActionId: "bb.action.SHARE" mimeType: "*" invokeTargetId: "sys.pim.uib.email.hybridcomposer" } onArmed: { trigger("bb.action.SHARE"); } } ] function shareFiles(s) { console.debug("file://" + s) emailQuery.query.uri = "file://" + s; emailQuery.query.updateQuery(); }
and returns to the console log.
file:///accounts/1000/shared/documents/mydatafile.csv InvocationWrapper::onQueryFinished: no matching result from Menu Service for query mimeType="*" uri=QUrl("file:///accounts/1000/shared/documents/mydatafile.csv") data= "" metadata= QMap() perimeter= 0 action= "bb.action.SHARE" target= "sys.pim.uib.email.hybridcomposer" invokerIncluded= false InvocationPrivate::onQueryResolved: no result matching query, no armed signal sent.
Any suggestions... Tried a different approach when searching for different thread related to the topic but so far no luck...
This is confirmed to not work in 10.2 (wire)
I had questions about the year 10.0 with her last and switch to a version of c ++ which is still working on the last update
* Assuming a context property is set in this example, it is RPC.
applicationUI.cpp
#include
#include #include using namespace bb::system; void ApplicationUI::email() { InvokeRequest request; request.setAction("bb.action.COMPOSE"); request.setMimeType("message/rfc822"); QVariantMap data; data["to"] = (QVariantList() << "[email protected]"); data["subject"] = "Message Title"; QVariantMap moreData; moreData["data"] = data; bool ok; request.setData(bb::PpsObject::encode(moreData, &ok)); InvokeManager manager; manager.invoke(request); }
applicationUI.hpp
namespace bb { namespace cascades { class Application; class LocaleHandler; } namespace system { class InvokeManager; } }
public: ApplicationUI(bb::cascades::Application *app); virtual ~ApplicationUI() { } Q_INVOKABLE void email();
. QML
Button { onClicked: { cpp.email(); } }
* I belive files may be attached, if you add in the table of data of QVariantMap, I think that should do the trick
data["attachment"] = "file:///path/to/my/item.txt";
-
Procedural error the call for VARRAY String as parameter
Hello
I get the error during the call to the procedure:
Here are the steps:
CREATE or REPLACE TYPE PART_TYPE IS an OBJECT (part_number VARCHAR2 (120));
CREATE OR REPLACE TYPE PART_REC_TBL IS VARRAY (1000) of PART_TYPE ;
I have a stored procedure in the package:
create or replace package TEST_PART_SEARCH_PKG AUTHID CURRENT_USER AS
PROCEDURE ADD_TO_PART)
p_part_number_list IN PART_REC_TBL ,
p_ord_number IN Varchar2,
x_error_flag OUT Varchar2,
x_error_msg OUT Varchar2
);
end TEST_PART_SEARCH_PKG;
When I call the Package:
DECLARE
v_flag varchar2 (100);
v_err_msg varchar2 (100);
BEGIN
TEST_PART_SEARCH_PKG. ADD_TO_PART ('09031518,0897701 ',' 003146M 56', v_flag, v_err_msg);
END;
error report-
ORA-06550: line 5, column 6:
PLS-00306: wrong number or types of arguments in the call to 'ADD_TO_PART '.
ORA-06550: line 5, column 6:
PL/SQL: Statement ignored
It would be helpful if someone can help me on this
Obviously. There are no part_number, so turn in your package and get rid of it:
FOR indx1 IN 1.p_lot_number_list. COUNTY
LOOP
BEGIN
SELECT
inventory_item_id
IN
var_item_id
Of
test_part_number_v
WHERE
PART_NUMBER = p_part_number_list (indx1);
EXCEPTION
WHILE OTHERS THEN
var_item_id: = NULL;
END;
SY.
-
The call for a process when you click the link export v4.1.1.00.23
Version 4.1.1.00.23
Hello
I have 6 Classic reports on the page.
Each report has link active Export.
I need to insert the set of results that is questioned about the report in a table. Each report is independent of each other.
Each report has its own table to insert the result set in.
My thought was to call a process Page when a user has clicked on the link export, but the process is not known. I put: apex_application.g_print_success_message: = 'Insert '; in the process of the Page to tell if the process was called. I think that the process is not called because the page is not sent when the user clicks on the link to the export. It is purely a guess.
What I tried:
Working with just the first report, I created a page element hidden in the region of the report and created a calculation before heading for the region ID.
SELECT region_id FROM apex_application_page_regions WHERE application_id = :APP_ID AND page_id = :APP_PAGE_ID AND region_name = 'My First Report Region'
Then on the wording of the link for the link export in the attributes report I put:
< a href = "f? "p = & APP_ID.:124: & SESSION.: FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us" > Export CSV - my first data reports < /a >
The Condition, that I used in the process of the Page is:
Point process: submit now - after calculations and Validations
PL/SQL -: REQUEST = FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us
of course, that didn't work so I tried it - "FLOW_EXCEL_OUTPUT_R" | & P124_ESSCSD_REGION_ID. | "_en - us
and I tried it - "FLOW_EXCEL_OUTPUT_R" | : P124_ESSCSD_REGION_ID | "_en - us
None of which worked.
SO, can someone help me with a solution called a process to insert the data in the report, when the Export link is called?
What information can I I provide/clarify?
Thank you
Joe
Knew that I had seen cela somewhere... Try to watch this blog of Martin D: D'Souza Giffy Martin on Oracle APEX: APEX report download recorder
Thank you
Tony Miller
Software LuvMuffin
Ruckersville, WILL -
Create null values in the database for interactive report link column values
Hello
I'm pretty new to APEX and tries to create an interactive report with the form. This report examines essentially for more information for a particular employee. If the employee has any information in the table, the report presents information with a button change beside him. If there is no record in the table for this employee, a create button appears. Now when you click create, a new creation page. This page contains the employee number as a single display field with the value from the previous page. This value is displayed in the page, but it is not in the database. Create the page has view-only number and a couple of other columns. The other columns get inserted into the table with an empty number!
Can someone please? Looks like the page keeps the value zero for the number of the employee who came during the search of the interactive report. Hope I made myself clear, being the newbie hope I haven't used any incorrect terminology.
Thank you!
RobetWithout the DB column, apex will not determine which DB column the data in this field are mapped to (it would be quite impossible to guess the destination since the name of the element column).
If you want to assign to the previous element of the page, use the default section
return: P1_EMP_NUM
By default the value Type: body of the PLSQL function
and configure the attributes of source as I said before
-
Close the reference (for a more specific class)
I'm feeding a control reference to the node "to a more specific class. When I finished, I understand that I have to close the order, but what I also close the reference that is the output of the node "to a more specific class?
This is the same reference... There is no need to close the two. And if you approve the automatic cleanup of references LabVIEW, you really do not need to close, as the references control must never be matched and will be automatically cleaned when your VI is inactive.
For more information, here is a blog that just now, I wrote that talks about closing reference.
-
How to recover the call for a silent call
Hello
I put in work AbstractPhoneListener in my application. Is there a way I can get a silent call notification as there are reminders for the holding of a callHeld() call and call resume callResumed(). I know that there is no appeal in AbstractPhoneListener interface. Is there any other drink so that I can get silent call notification?
Concerning
Prashant
getStatus () of the PhoneCall class you will get the status of the call... In your case, it will return STATUS_CONNECTED_MUTED (which is a public static int in the same class)
Thank you!
-
The call for a process of application using JS by a button
Hello
I need to create a button that deletes the entire table All_References lines.
I have created a new process of shared components "Delete_All_References" call, then set it to run on demand.
PL/SQL block:
Begin
Delete from All_References;
End;
/
In the HTML header of the page on which lies the button 'Remove all references' or P13_DeleteAllReferences, I entered in the following:
< script language "JavaScript" type = "text/javascript" >
function Delete_All_References()
< /script >
I have then entered the settings button, set the action to "defined by dinamic action", then added onchang = "javascript:Delete_All_References();" "in HTML table cell attributes.
According to most of the tutorials when I click the button remove all the button of refereneces, my table should now get clear but it doesn't.
Can you guys please help?
Thank you and best regards,
DiezThe onchange event will work fine. Change the button back to a normal button instead of linking to a dynamic Action for now.
The only other thing I see which can cause a problem is your call to the method itself.
OnChange = "JavaScript:Delete_All_References();" »
Need to replace...
OnChange = "JavaScript:delete_all_references();" »
The called javascript method is case-sensitive.
Let me know if it suits it.
Malay Keith
www.blackhawkenterprise.com
Maybe you are looking for
-
Nothing I've tried (as above including the catering theme module, etc.) has referred the tabs below the position of the url bar. I had inside information (mozilla support) referencing the instructions to remove the contents of a folder. Please provid
-
Need the Windows XP drivers for satellite A210
Hello I just bought new Equium A210-17I. I want to change my OS Vista and want to install Windows XP, so everyone had drivers WXP then please post links so I can download it. Thanks in advance...
-
Problem of closing IdeaPad black 300
I'm under W10 V1607 OS 14393.187 and I can't get off the computer correctly. I get the standard Windows message stop then the whites of the screen on. However if the keyboard is connected, the led remains power on and it is certainly still on. I chan
-
How to set the padding for TextField?
Hello, forum Is it possible to put the padding of the TextField, as I put it for LabelField using the setPosition method? Thanks in advance, Mikhail
-
Fälscher parameter 0 x 80070057
any suggestions? backup not possible anymore.