ODBC error

Similar Questions

• Configuration of DNS ODBC error IM002 10040

  1. When you connect to Analytics with user Weblogic:

  Unable to sign in

  An error occurred during authentication. Try again later or contact your system administrator.

  2 Weblogic user's abel to connect to the console and the em with success.

  3 it is not a GUID

  4. There is a problem with the DNS configuration, what value he seeks? How to properly configure the DNS

  5. I have reviewed Note: 1554245.1, the Solution makes sense, however, I do not know how to fix the value of correct parameter < DNS >.

  Error:

  [tid: 1732] Error during extraction of data from the API of Population user of the Oracle BI Server user/group.

  Impossible to create a system for BI Server user connection during the execution of the requests of the user population

  ODBC driver returned an error (SQLDriverConnectW).

  State: IM002. Code: 10040. [NQODBC] [SQL_STATE: IM002] [nQSError: 10040] The requested data source name is not found, incomplete or incorrect.

  This card in the ODBC test.

  Thank you

• ODBC error when implementing applications on SQL Server BI

  Hey,.
  
  We are implementing BI applications using SQL Server as the database of the warehouse, and we run in the following errors when viewing reports out-of-the-box:
  
  [ODBC SQL Server driver] [SQL Server] 'concat' is not a recognized built-in function name
  
  [ODBC SQL Server driver] [SQL Server] Incorrect syntax near 'NULL '...
  
  It seems that the standard reports using Oracle SQL-specific features that are not available in SQL Server. BI Apps is still supposed to be certified with SQL Server.
  
  No matter who else experience this problem? If so, how have you around her?
  
  Thank you
  Yi

  Make sure that your database in the physical layer supports the CONCAT function.

• Transparent Oracle Gateway for ODBC error on SELECT Sybase Anywhere 11

  Environment:
  ------------------
  O / s: CentOS 6.2 (64-bit)
  Oracle DB: Oracle XE 11.2.0.2.0 (64-bit)
  Sybase DB: Sybase Anywhere 11 (64-bit)
  Driver ODBC: unixODBC 2.3.1 (64-bit)
  ODBC drivers: Sybase Anywhere Client ODBC (64-bit)
  Oracle ODBC Gateway: 11.2.0.1.0 (64-bit)
  NOTE: The two databases are local.
  Changing init.ora in listener.ora gateway home directory and put to update the (and use) and tnsnames.ora Oracle XE directory.
  Listener and tnsping started / worked successfully.
  -----------------------------------------------------------
  
  Question:
  ----------
  
  Get the following error message when you try to SELECT a Sybase Anywhere 11 database via the ODBC Oracle Gateway running with Oracle XE:
  
  SQL > select * from employees@SybASA;
  Select * from employees@SybASA;
  *
  ERROR on line 1:
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [
  
  SQL >
  
  Trace enabled in bridge init.ora file (initSybASA.ora) and got the following at the end of the trace file:
  
  hgocont, 2752 line: call SqlDriverConnect obtained sqlstate 0
  Out of hgocont, rc = 28500 to 2012-08-05-08: 44:56 with the ptr LEADER: hgocont.c LINE 2772 FUNCTION error: hgocont() ID: something else that permission is not valid
  Out of hgocont, rc = 28500 to 2012-08-05-08: 44:56 with the ptr LEADER: hgocont.c LINE 781 ID:Calling FUNCTION error: hgolgon() hgocont
  Entry hgoexit to 2012-08-05-08: 44:56
  Release of hgoexit, rc = 0
  
  ---------------------------------------
  Any advice would be appreciated. THX.

  Hello
  Could you add the following to theinit .ora leading bridge -

  HS_LANGUAGE = AMERICAN_AMERICA. WE8ISO8859P1
  HS_NLS_NCHAR = UCS2

  and try a select a new SQLPLUS session.
  If you still have problems then post the following files-

  -Gateway listener.ora
  -Gateway initSybASA.ora

  Kind regards
  Mike

• [Newbie question] Get * = 08004, TimesTen error = 818 ODBC error

  Just play with 10 times and I'm getting following error starting from data source
  
  bash - $3.2. / ttadmin - cachestart cachealone1
  [TimesTen] [driver ODBC of TimesTen 11.2.1.3.0] sum permanent partition sizes and temporary (2320 MB) exceeds the maximum size (2047 MB) on this platform
  
  ODBC = 08004, TimesTen error = 818 error
  
  
  Where Timesten hitting this limit of 2047 MB? Can I increase the maximum size by making some configuration changes (my machine like around 6 GB memory [Oracle DB is also installed on the same node]). I'm checking the various operations using larger tables (about 2 GB DB size).
  
  
  The configurations are:
  
  
  
  [root@stin77 ~] # / sbin/sysctl Pei
  NET. IPv4.ip_forward = 0
  NET. IPv4.conf.default.rp_filter = 1
  NET. IPv4.conf.default.accept_source_route = 0
  kernel. SysRq = 0
  kernel.core_uses_pid = 1
  NET. IPv4.tcp_syncookies = 1
  kernel.msgmnb = 65536
  kernel.msgmax = 65536
  kernel.shmmax = 4294967295
  kernel.shmall = 268435456
  FS.file - max = per 6553600
  NET. IPv4.conf.default.rp_filter = 1
  NET. IPv4.conf.default.accept_source_route = 0
  kernel. SysRq = 0
  kernel.core_uses_pid = 1
  kernel.shmmni = 4096
  kernel.SEM = 250 32000 100 128
  NET. IPv4.ip_local_port_range = 1024 65000
  NET. Core.rmem_default = 262144
  NET. Core.wmem_default = 262144
  NET. Core.rmem_max = 262144
  NET. Core.wmem_max = 262144
  
  
  
  
  
  bash - $3.2 uname - a
  Linux 2.6.18 - 92.el5PAE #1 SMP stin77 kills Apr 29 13:31:02 EDT 2008 i686 i686 i386 GNU/Linux
  
  
  [cachealone1]
  Driver=/localhome/Oracle/TimesTen/TimesTen/tt1121/lib/libtten.so
  Data store = / localhome/oracle/Timesten/TimesTen/tt1121/info/DemoDataStore/cachealone1
  TempSize = 320
  PermSize = 2000
  PLSQL = 1
  DatabaseCharacterSet = WE8MSWIN1252
  OracleNetServiceName = orcl
  
  
  Kernel parameters:
  
  [root@stin77 ~] # / sbin/sysctl Pei
  NET. IPv4.ip_forward = 0
  NET. IPv4.conf.default.rp_filter = 1
  NET. IPv4.conf.default.accept_source_route = 0
  kernel. SysRq = 0
  kernel.core_uses_pid = 1
  NET. IPv4.tcp_syncookies = 1
  kernel.msgmnb = 65536
  kernel.msgmax = 65536
  kernel.shmmax = 4294967295
  kernel.shmall = 268435456
  FS.file - max = per 6553600
  NET. IPv4.conf.default.rp_filter = 1
  NET. IPv4.conf.default.accept_source_route = 0
  kernel. SysRq = 0
  kernel.core_uses_pid = 1
  kernel.shmmni = 4096
  kernel.SEM = 250 32000 100 128
  NET. IPv4.ip_local_port_range = 1024 65000
  NET. Core.rmem_default = 262144
  NET. Core.wmem_default = 262144
  NET. Core.rmem_max = 262144
  NET. Core.wmem_max = 262144

  You are running TimesTen 32-bit on a 32-bit o/s. regardless of the quantity of memory has the machine, there are limits on how much can be used by an individualized process and additional limits the size of the file etc TimesTen 32 bit is limited to a maximum of 2 GB data store size.

  To create a data store with a total size greater than 2 GB, you need a 64 bit machine running an o/s 64-bit and 64-bit TimesTen. Then, the only limit is the amount of memory physical you in the machine...

  Chris

• DSN ODBC error after you run the wizard from the Config of Siebel

  Hello

  I have installed Siebel Ent Server, ran the gateway Config and ITS Config. As a result, I had a created DSN called SBA_82_DSN. When I open the DSN and click 'Test connection', I get the following error:

  Specified driver could not be loaded because of the error system 126: the specified module could not be found. (Siebel Oracle90 C:/Siebel/15.0.0.0.0/ses/gtwysrvr, C:\Siebel\15.0.0.0.0\ses\gtwysrvr\bin\seor825.dll).

  Here is my set to the top:

  Server Siebel (where I get this error), is a Windows Server 2012 R2 x 64.

  Siebel - files Installation for Windows x 64

  -JDK 1.7 x 64

  -Oracle DB EE 12 c Client x 64

  Oracle (12 c, x 64) server is installed on Windows Server R2 2012 x 64.

  -Oracle DB Enterprise Edition 12 c 1 x 64 Windows version installation

  Any help would be greatly appreciated.

  Thank you

  MB

  The solution, used EE DB Oracle 11g x 64 server with DB Oracle 11 g x 86 Client because they are the most recent versions of Oracle DB that supports 15 Siebel. That I solved the problems of DSN.

• ODBC error reports

  Hi friends,
  
  In my BI dashboard, im results for some reports, but the other reports I'm getting the error as below
  

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 17001] Oracle Error code: 25153, message: ORA-25153: Temporary Tablespace is Empty at OCI call OCIStmtFetch. [nQSError: 17012] Bulk fetch failed. (HY000)

  Given that in my db too, I increased my tablespace temporary memory up to 30 GB, but then too im getting the error above.
  
  What is the exact reason for the above question and how to solve it.
  
  Kindly guide me friends.
  
  Thanks in advance
  
  Kind regards
  Saro

  Get the physical query generated try to run into Toad or sqldeveloper and same time try to execute the query to monitor the temp space.
  do the same for all other queries, or else all the queries at a time. It'll tell you how much space requirement

• Win XP VM Player ODBC connection errors

  Hello VMware Forums,

  I am running Windows 7 on my machine of bare metal.  I installed VM Player and an XP VM to host my existing applications, such as our old school (HEAT) Helpdesk ticketing software.  It requires an ODBC DSN system on a server connection using the MS Access driver.  The virtual machine has been added to the field.

  I have install a ping running between my host and client and have not dropped a single package.  After about 5 minutes of running the application, I go to hell ODBC and get a steady flow of connection ODBC errors causing application crash and my session to hang.

  I checked the server logs and found that I authenticate me every 2 seconds until the server got sick of me and my application was refused.  Obviously when I go into the hell of the ODBC.

  Issues related to the:

  1. can I reconfigure the virtual NETWORK adapter to use the same subnet as my corporate network? This would make a difference, because I can communicate between client and server, host transparently?

  2. the installation of a 2nd NIC in my host would help the situation?

  3. any other suggestions? I can't do my job without this software... ;-(

  Thank you very much!

  -Jacob

  jtdubail wrote:

  I'm not sure I follow you.  I managed to corrupt the database application well.  Who made my day!

  Sorry, my fault. You said it's the always-connected host, not the comments.

  Is there a reason why an ODBC DSN connection does not smoothly in a virtual machine?  It seems that the connection is not stable enough to keep the Access database to panic...

  No, I don't know why it should not work in normal circumstances. I guess that needs deeper investigations. But what I've seen is (yet) that you use NAT to the customer. Which makes things maybe a little more complicated. When you use inbound NAT connections fail, as these needs to be rerouted to the guest. In addition the IP hosts will not appear on the network. All packets appear to come from the host, as it acts as a proxy for the guest.

  You will better use 'bridge' for the vNIC to the guest and you can then use the physical subnet IP address range.

  Do I you just that the prompt is one that tries to connect through ODBC to a database on the physical network server?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Driver ODBC OBIEE text error

  Hi all
  
  I created a text file as a data source. It works fine when the file is moved on my computer, but I can't seem to make it work when it is on the server.
  
  It throws this error.
  
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 16001] ODBC error state: IM006 code: 0 message: [Microsoft] [ODBC Driver Manager] driver's SQLSetConnectAttr failed. [nQSError: 16001] ODBC error state: S1009 code: message - 1023: [Microsoft] [ODBC text driver] '(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server where the file is located. (HY000)
  
  This has something to do with UNC path names? on the odbc Setup program I can't enter any text to just the mapped drive.
  
  Any help much appreciated.
  
  Thank you
  Tim

  Go to the registry and enter the UNC name for the ODBC entry...

  Please allow points if you find it useful

• ODBC 80004005 error on server

  When I run my site on my local server without problem, when we run a www.comeseeitaly.com (choose any Language) looks like this.
  
  Microsoft OLE DB provider for ODBC error '80004005' drivers
  
  [Microsoft] [ODBC driver manager] Data source name not found and no driver by default specified
  
  Home.asp, line 15
  
  Line 15 is "Menu.ActiveConnection = MM_access_adventure_STRING".
  calling my login page "access_adventure.asp", which has the following
  
  < %
  ""FileName ="Connection_odbc_conn_dsn.htm".
  "Type ="ADO. "
  "DesigntimeType ="ADO"
  "HTTP ="false"
  "Catalogue =" "
  "Schema =" "
  Dim MM_access_adventure_STRING
  MM_access_adventure_STRING = "dsn = access_adventure;"
  % >
  
  
  I called Godaddy about 5 times and all guys can say it's "script error" and small robots. I asked them why they think about it and they say look he points to line 15 in the error code... Everything I found on the web about this error normally points to errors for authorization on the users computer user. As I said before, it works fine on my local server.
  any help would be great.

  Thanks Nancy, I created the dsn and I said support staff throughout that the problem is with the dsn. They just repeat as drones... script error script error... I tell them that line 15 is just call the dsn and receives no response... their response...... script error in any case I just went and created a dsn less connection and the site is in place. Thank you for your help.

• DataExport problem-ODBC layer error: [21S 01] - ORA - 00947

  Hello
  
  I have a planning application from where I want to transfer data to Oracle DB in the table "t". I have 11 dimension in the planning application, so I created 12 columns in the table "t"(11 pour les membres de la dimension et le 1 col valeur) with the following script-"»
  
  create table t)
  a varchar2 (100),
  b varchar2 (100),
  c varchar2 (100),
  d varchar2 (100),
  e varchar2 (100),
  f varchar2 (100),
  g varchar2 (100),
  h varchar2 (100),
  I varchar2 (100),
  j varchar2 (100),
  k varchar2 (100),
  number of l)
  
  I created a wire protocol dsn. But when I run the following calcscript.
  
  Difficulty (jan, AFA 08 budget)
  DATAEXPORT 'DSN' "xz" "t" "tstschma", "password";
  ENDFIX
  
  then he demonstrated below - error
  
  [Mon Jul 13 00:04:10 2009] Local/essdb/Plan1/admin/Info (1021000)
  Connection to SQL Server database is established
  
  [Mon Jul 13 00:04:10 2009] Local/essdb/Plan1/admin/Info (1012695)
  DataExport cannot do insert of batch for the relational table. The driver ODBC or the RDBMS does not support the insert commands. Export SQL for registration by registration
  
  [Mon Jul 13 00:04:10 2009] Local/essdb/Plan1/admin/Info (1021013)
  Layer ODBC error: [S 21, 01] == > [[DataDirect] [ODBC Oracle Wire Protocol driver] [Oracle] ORA-00947: not enough values]
  
  [Mon Jul 13 00:04:10 2009] Local/essdb/Plan1/admin/Info (1021014)
  Layer ODBC error: Native [947] error Code
  
  [Mon Jul 13 00:04:10 2009] Local/essdb/Plan1/admin/Error (1012085)
  Impossible to export the data to the SQL [t] table. Check the Essbase server log and the console of the system to determine the cause of the problem.
  
  [Mon Jul 13 00:04:10 2009] Local/essdb/Plan1/admin/Info (1021002)
  SQL connection is released
  
  [Mon Jul 13 00:04:10 2009] Local/essdb/Plan1/admin/Warning (1080014)
  Transaction [0 x 920001 (0x4a5a097a.0x7918)] abandoned due to the State [1012085].
  
  [Mon Jul 13 00:04:10 2009] Local/essdb/Plan1/admin/Info (1012579)
  Total time elapsed Calc [datexprt.csc]: [0.062] seconds
  
  [Mon Jul 13 00:04:10 2009] Local/essdb/Plan1/admin/Info (1013274)
  Calculation executed
  
  
  Please guide me if I am doing something wrong...
  
  
  Thank you and best regards.

  Hello

  Everything depends on you dense dimension used in your export, it will use one column for each Member.
  For example, if the dense dimension on the export was time and you were doing an export from level 0 (Level0 time members are Jan: Dec)
  So we should do a column for each dimension and 12 columns for each of the periods (Jan: Dec)

  The best way out is to export to a file first in a column, and you will see how the table should be addressed.

  Columns must exactly match the exported data.

  Take a look at this post, it something you can meet this way:- Re: DATAEXPORT command periods in columns in rare

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 42000 SQL error state

  I have a sql 2005 with Service Pack 3 installed on a machine and on the second machine CA ARCserve backup software R16.5 installed and configured to use the SQL 2005 as its database, the backup and the restaurant's fines and thers one is work of migration that is created and when we try to change the work of migration to change the data and the time it says its completed successfully , but the modified date is not kept and we see the following error in our newspaper [SQL] _ASDBCliUpdateStagingGroup (rc = SQL state error: 42000, native error Code: 66, ODBC error: [Microsoft] [ODBC SQL Server driver] [SQL Server] incorrect syntax near '&'.), any suggestion to solve this problem

  It is not a community forum for SQL. Ask the experts on TechNet.

  Go to http://social.technet.microsoft.com/Forums/en-us/categories/ select "find a forum.

  and then look for SQL the list of forums. You must then select the most appropriate forum

  in this list.

  Don

• Cannot get 12.4SE to use the encrypted password for ODBC

  Hello

  We run gendata/genprint on the Linux platform and move from 11.5 to 12.4SE. The MRL is in a database of DB2 installed on MVS (and connect via ODBC). We installed the 12.4SE on the server, the engines and copied the entire folder structure, including our ISP * files, our installation of 11.5 - didn't change at all. If I run the motors with an unencrypted password, it works fine. The problem I'm running is when I run with a password encrypted in the ODBC DBHandler (that is what we have in our configuration 11.5), I get a lot of mistakes (the first letter is actually absent from these messages, I'm not myself truncating):

  Error in main(): unable to RunGenData(). See the errors file for more messages.

  Warning in RPDefDisplayProc(): display user procedure has not been defined.

  arningCountSIFileNamecratch/home/dmkr/documaker/rel124/rps100/rplib/unix /... /c/rperr.cSILineNumber099

  rrorCountSIFileNamecratch/home/dmkr/documaker/rel124/rps100/rplib/unix /... /c/rperr.cSILineNumber115

  lapsedTimeSIFileNamecratch/home/dmkr/documaker/rel124/rps100/rplib/unix /... /c/rperr.cSILineNumber193

  enData Completed-

  When I go to the ERRFILE.dat, I see:

  Transaction error report - system timestamp: Mon oct 19 12:36:33 2015
  DM12041: Error: error library FAP: Transaction: <>, area: ODBC error >
  Code1: <-30082 >, code2: < 4294937214 >
  message: 08001-30082 [unixODBC] [IBM] [CLI driver] security SQL30082N treatment failed with reason "3' ("PASSWORD MISSING").  SQLSTATE = 08001 >.
  DM12041: Error: error library FAP: Transaction: <>, area: < LBYInitializeLoaders() >
  Code1: < 0 >, code2: < 0 >
  message: failed to initialize the library < FJ§ > >.
  DM15066: Error RunGenData: could not LBYInitializeLoaders().   The system is configured to use the library, but the library could not be initialized.  Verify that the library is properly specified in the INI file and is accessible.

  == > Number of warning: 0
  == > Error number: 3

  When I look to the top of DM15066, I see:

  Explanation
  The call to LBYInitializeLoaders failed in function (GenTrn.c, GenData.c or GenPrint/PrintEnv.c). The usual reason that LBYInitializeLoaders do not is that the library is stored in a DBMS (DB2, Oracle or SQL Server) and the DBMS or database in the DBMS is not accessible.

  Programmer's response
  Check that the DBMS or database in the DBMS used by the MRL is running. If this isn't the case, please re - initialize the DBMS or database in the DBMS.

  Anyone has an idea why my installation 12.4SE dislikes the encrypted passwords?

  Thank you

  Gregg

  I hope that I am not striking myself, but I think I have it working now. I started a support ticket about not being not able to get the cryrun utility to work on Linux, and when I hit the stage 2 ("solutions"), one of the proposed solutions talked about this specific question. He explained that specifying a folder deflib allow the utility Cryruw32.exe to place a file 'Omar', and that you then this odek file in your deflib when you try to run the documaker engine. I read the release notes, pointing to the "reference help utilities" for more information, but there is NOTHING in this guide for the Cryrun utility which mentions the file "odek".

  Anywho, I made a generic file deflib, run the utility, FTP'd the file down to the deflib of my application on the Linux server, copied the encrypted password new/different in fsiuser.ini, and voila, it ran!

  For those interested, it was Doc ID 2006951.1

  Thanks for your help.

• Problem after 10g to the conversion of 11g with access ODBC application connection.

  We have recently updated one of our databases Oracle 10.2.0.4 on 11.2.0.4.0.  We used Data Pump export of database 10g and the new database 11g Data Pump import.  Everything went well.  We have several users who use an Access database with an ODBC connection to our Oracle database.  We installed 11g on their PC client and install the tnsnames file to point to the new database 11g.  We have a configuration read only account that everyone uses to connect to the Oracle11g database through the Access application.  We have a user who gets an error, even if this computer has been installed just like everyone elses.  She becomes an odbc error, that the account is locked.  I had the read-only account on our database 10g locked, so everyone would be forced to use the 11g database, because we could not completely stop the 10g database.  We have searched the c:\ drive and you can find 1 tnsnames file and it is directed to the new database 11g.  However when we unlock the account read-only on the 10g database, access works very well.  It is as if she is always directed to the 10g database, but we cannot find any link to it.  This user can also connect another pc that the ODBC connection to server 11g works with the access application and it does not work with them connected.  Any help would be appreciated!

  Our resolution is a slight reorganization of elements of Oracle in the Environment Variable Path in system settings Desktop/Properties/Advanced to ensure that the proper path containing the precise tnsnames.ora file was represented was just what he needed.

• vCenter camera 5.5 vpxd 2d crashing frequently postgresql memory errors

  We are a unit of vCenter version 5.5 2d. We have recently updated to this version to try to resolve our problems with vCenter break. Occasionally, usually every 1-2 days vCenter crash. When he crashes a dump file (core.vpxd - worker) is created in the folder/storage/core.

  I have a support case to open with VMWare and so far I have not any resolution about why my vCenter hangs so frequently.

  I noticed when picking through the vpxd.log after the last crash as there are errors of memory with postgresql which has happened just before the accident. I think this may be the culprit. Anyone have any ideas on how to fix these errors?

  
  

  Our vCenter device has 24 GB memory and rarely exceeds 25% usage, even with the CPU. I'll try to run a command vacuum manual described here but I'm all out of ideas on what to try.

  
  

  2015 02-07 T 02: 00:05.656Z [WARNING "Default" opID = SWI-3f804862 7F717AEDD700] [VdbStatement] SQL execution failed: empty (analyze) vpx_hist_stat1_227

  2015 02-07 T 02: 00:05.656Z [WARNING "Default" opID = SWI-3f804862 7F717AEDD700] [VdbStatement] run time: 617 ms

  2015 02-07 T 02: 00:05.656Z [WARNING "Default" opID = SWI-3f804862 7F717AEDD700] [VdbStatement] given the driver diagnosis are 53200:1:7:ERROR: out of memory

  -> Failure at the request of size 71. ;

  -> Error executing the query

  2015 02-07 T 02: 00:05.656Z [7F7136244700 info 'commonvpxLro' opID = 1852ed36] [VpxLRO] - tâche-interne-54802710--40675e8b-09b0-7864-8924-58652fc267da(525eca50-84c7-4d37-746a-92b7f9e93dae)--vmodl.query.PropertyCollector.retrieveContents--BEGIN

  2015 02-07 T 02: 00:05.657Z [7F719F5B8700 info 'commonvpxLro' opID = 55c1e2d6] [VpxLRO] - BEGIN task-internal-54802713 - vim. SessionManager.sessionIsActive--81106db1-3765-372b-d642-b669c3f2f54e(52fdfe72-ff88-eb87-d25c-3319b0c665f0)

  2015 02-07 T 02: 00:05.657Z [7F7136244700 info 'commonvpxLro' opID = 1852ed36] [VpxLRO] - FINISH special-internal-54802710 - vmodl.query.PropertyCollector.retrieveContents -.

  2015 02-07 T 02: 00:05.656Z [WARNING "Default" opID = SWI-3f804862 7F717AEDD700] [VdbStatement] Bind parameters:

  2015 02-07 T 02: 00:05.657Z [7F719F5B8700 info 'commonvpxLro' opID = 55c1e2d6] [VpxLRO] - FINISH special-internal-54802713 - vim. SessionManager.sessionIsActive-

  2015 02-07 T 02: 00:05.658Z [7F719C5D9700 info 'commonvpxLro' opID = 2 d 146636] [VpxLRO] - tâche-interne-54802714--9008cfb1-d611-14ad-8b3e-202cb5d30d42(52caec42-b1ee-461f-a49d-f6d3f0f243dd)--vmodl.query.PropertyCollector.retrieveContents--BEGIN

  2015 02-07 T 02: 00:05.658Z [7F719C5D9700 info 'commonvpxLro' opID = 2 d 146636] [VpxLRO] - FINISH special-internal-54802714 - vmodl.query.PropertyCollector.retrieveContents -.

  2015 02-07 T 02: 00:05.658Z [error "Default" opID = SWI-3f804862 7F717AEDD700] [Vdb::IsRecoverableErrorCode] Impossible to recover from 53200:7

  2015 02-07 T 02: 00:05.658Z [error "Default" opID = SWI-3f804862 7F717AEDD700] [VdbStatement] SQLError was lifted: "ODBC error: (53200) - ERROR: out of memory.

  -> Failure at the request of size 71. ;

  -> Error during the execution of the query"is returned when you run the SQL statement 'empty (analyze) vpx_hist_stat1_227.

  Eventually my problem was due to 5.8 VDP connections to vCenter and don't close does not connections on http://kb.vmware.com/kb/2094879

  Working together with they provided a patch for my POS 5.8 environment. I don't have accidents since it has been implemented.