ODIExportLog Tool - get the newspaper details after execution

Similar Questions

• After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad: "your iPad could not be activated because the activation server is temporaril."

  After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad:

  "Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support. »

  I am based in Lagos in Nigeria and can't seem to find any Support from Apple for my country on the web. Please urgent help because I can not access my iPad. Thank you.

  How did you get the update? via iTunes or ios

• I get the WindowsUpdate_80072efd error after installing SP2

  I get the WindowsUpdate_80072efd error after installation of SP2.

  I tried everything in the knowledge base and nothing worked, I contacted Microsoft Support staff tried his suggestion, send the message back and nothing rror. I need an answer or a help on this, normally, I am satisfied with MS and their products, but it turns me off the coast.

  Thanks SpiritX solution to http://www.walkernews.net/2009/05/14/how-to-fix-windows-update-error-80072efd-in-vista-sp1/, of course, that was the last I tried because it was for SP1 and SP2, I.

  Now, why is not in the list of solution for the error I was getting I have no idea.

  But thnak - you, thank you, thank you.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I get the internal details of the filesystem ReFS?

  Hello!

  Can I get the internal details of the filesystem ReFS?

  Thanking you in anticipation.

  Concerning

  Hi Siddique,

  Please contact Microsoft Community.

  Windows clients want an economic platform that maximizes the availability of data, can effectively scale to very large volumes of data across various workloads, and guarantees the integrity of the data using the resiliency to corruption (regardless of hardware or software failures). REF is a new file system that targets those needs while providing a basis for future innovations. I suggest you read the article for more information.

  Overview of resilient file system

  https://TechNet.Microsoft.com/en-us/library/hh831724.aspx?f=255&MSPPError=-2147217396

  Hope this information helps. Reply to the post if you need help or information on this issue.

• Is it possible to get the query Details of the old run from oracle?

  Is it possible to get the query Details of the old run from oracle? I mean, I wanted to know the details of a request executed work, I know the time taken by the query to run? Is it possible to know?

  Yes, it is possible to obtain, provided you use enterprise edition version + additional license *. A few tables to get information of are:

  dba_hist_sqltext

  dba_hist_sqlstat

  dba_hist_snapshot

  dba_hist_sql_plan

  dba_hist_active_sess_history

• Get the following message after closing or printing a document: the Organizer database is damaged and will be rest next time Acrobat is launched.

  Get the following message after closing or printing a document: the Organizer database is damaged and will be rest next time Acrobat is launched.

  Hi kathleenm92885635,

  Please check the solution in this doc. KB: http://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html

  Let me know how it goes.

  Kind regards
  Nicos

• HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10

  Hello

  I upgraded Windows 8.1 to Windows 10 yesterday.

  Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.

  When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"

  On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.

  Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.

  Thank you best regards &,.

  Umesh

  Here are the technical details:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF

  It is HD4400 Intel graphics

  Try the Intel driver update utility:

  https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

  Download drivers HP pages not available right now.

• TestStand 2014 F1 Patch removes the report itself after execution of finishing

  Hi all

  today I installed the patch 2014f1 TestStand and after that, I recognized that TestStand removes my reports of ATML5 by itself after execution of finishing.

  I'm active On-The-Fly Reporting and store reports in different places for each sequence. This place, I determine in the PREUUT callback.

  During execution, I see that the report is generated exactly at the specified location, but if the execution is complete they will be removed immediately. I don't know why?

  Do I have to remove the f1patch? Someone at - it the same problems?

  I will be happy if someone has a suggestion what to do.

  Thank you very much!

  Hello

  I created a sample file to show the effect (see attachment). I think I found the problem and it's my fault.

  I have seen that it is me who deletes files (SetReportPath.vi). Before you begin the statement I want to erase the reports directory.

  When I work with my custom GUI LabVIEW (uses parts of the SimpleUserGUI-example of TestStand, singlePass-execution) everything works fine. The SetReportPath.vi removes the old reports and after the execution of this new report remains in this directory. PreUUT-reminder, therefore, seems to be executed only once. The same thing happens if I use TestStand SequenceEditor for the execution of the sequences and use there "SinglePass.

  When you use the SequenceEditor TestStand to perform sequences in Mode TestUUT the new report is deleted after that first Test USE ended and I click on stop in the USE Information-dolls. I think the PreUUT callback is called here and SetReportPath.vi deletes my report. This seems logical.

  With this routine I'm working now for two months and I noticed that the "deletion" just after the installation of the Patch TestStand2014f1. So I think that there are some changes by calling PreUUT-reminder, but I'm not sure. Maybe you can check this.

  Thank you!

• HP Jet 13: could not get the usable screen after you enter the password when you restart

  After reboot I get the standard wallpaper (like the rings of Saturn), hour, day, week, month, and day, wifi bars and battery.  After the press, I have the icon pushing, my name, email and password.  By entering the password I get the points surrounding white and WELCOME, then by default in the screen with only sûr white pointer visiible.

  That's all new laptop from Amazon and seemed to work well until I have intalled the Office 365 online.  Then I started to get warnings from McAfee on bad files 'try to start', then the blank screen even during reboot.

  Please let me how to restore my system or to whom to return it.

  Thank you

  The model / sn numbers are tiny, but can be: model 13-c010nr sn 5CD50311MZ

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• SQL query to get the NULL records after the last matching flag

  I have a xx1 table with id and flag columns. So I want the data in this table, after the last flag matched. I want that data to id 7 in the rooms. Even if the id 2,3,5 are null flag 'Y' was at 6. ID so I need a query to get the data of the xx1 table after the last correspondence flag (from 7 to 9 id).

  SQL > create table xx1

  2 (identification number,

  3 flag varchar2 (10));

  Table created.

  SQL > insert into xx1 values (1, 'Y');

  1 line of creation.

  SQL > insert into values xx1 (2, null);

  1 line of creation.

  SQL > insert into values xx1 (3, null);

  1 line of creation.

  SQL > insert into xx1 values (4, 'Y');

  1 line of creation.

  SQL > insert into values xx1 (5, null);

  1 line of creation.

  SQL > insert into xx1 values (6, 'Y');

  1 line of creation.

  SQL > insert into values xx1 (7, null);

  1 line of creation.

  SQL > insert into values xx1 (8, null);

  1 line of creation.

  SQL > insert into values xx1 (9, null);

  1 line of creation.

  SQL > select * from xx1.

  FLAG OF THE ID

  ---------- ----------

  1. IS

  2

  3

  4. IS

  5

  6. IS

  7

  8

  9

  9 selected lines.

  SQL >

  Hello

  user11164339 wrote:

  Hi Frank - when I run the query, I don't see the results data.

  I get

  FLAG OF THE ID

  ----- ----------

  7

  8

  9

  What you do differently?

• One of the virtual machine gets the APIPA address after you have configured with a static IP address, where the other VMS works very well with same vlan with static IP

  We have deployed 3 VMs with the same vlan where one virtual machine gets APIPA address, even after the configuration of the IP address manually.

  We do not have servers DHCP and other VMs 2 find with the same vlan

  No IP address is not used by another system and another IP address works

  Meanwhile, I just googled and got a God save the link that helped me in the question of fixing

  http://lyngtinh.blogspot.in/2011/12/how-to-disable-Autoconfiguration-IPv4.html

• I get the context menu after using firfox as my browser: Exc in ev handl: error: Bad NPObject as private data!

  In the last few days I've been doing the following popup when I use firefox as my browser: Exc in ev handl: error: Bad NPObject as private data!

  I guess it comes from your last update. I have windows vista with a 64-bit processor, and I use the latest version of firefox. I checked to see if I was getting the same error message with explore and I'm not. It seems to be some sort of conflict with java script. This can be corrected?

  You have to remove and re - install anything. I had the same problem and simply disabled the McAfee Siteadvisor module without deleting. I then restarted Firefox and the problem was solved.

  But here's the important part: I reactivated the add-on and then restarted Firefox twice. The problem is not returned!

  Just so disable, reboot, re-enable and restart. It worked for me!

• How can I get the original software after I reinstalled the window

  I want to reinstall windows on my laptop, I just want to know how can I get the software provided with this laptop.

  What happened to reinstall window8

  Your laptops support page will be a few, but before installing Windows 8 you did a set of recovery discs so you can return to Windows 7?

  We can get the HP for a set of recovery discs and Once you're back, there is a file on the 'C' drive named SwSetup

  has little almost all software pre-installed that comes with the machine when you were at 7 W.

  Your statement is not clear enough, I hope that I understood it.

• How to get the contact details of the contact list to the use of the incoming call number?

  Hello

  I need callid, name, name of the company from the list of contacts to the use of the incoming number. If anyone has a solution please reply me as soon as possible.

  I have code below

  void ApplicationUI::onCallUpdatedd(const bb::system::phone::Call &call)
  {
      CallState::Type state = call.callState();
      //qDebug() << "call updated: callId=" << call.callId() << " callState="
      //  << state;
      if (state == bb::system::phone::CallState::Connecting
              || state == bb::system::phone::CallState::Connecting) {
          qDebug() << "call connecting";
      } else if (state == bb::system::phone::CallState::Connected) {
          qDebug() << "call connected";
      } else if (state == bb::system::phone::CallState::Failed) {
          qDebug() << "call Failed";
      } else if (state == bb::system::phone::CallState::Disconnected) {
          qDebug() << "call Disconnected";
      } else if (state == bb::system::phone::CallState::Incoming) {
          qDebug() << "call Incoming";
      } else {
          qDebug() << "Invalid";
      }
  }
  

  then, how I got the calling detail like number, name, company ect... call id?