OEM 12 c: installation problem in step 6 (database connection details)

Similar Questions

• ORA-942 from the page of connection details of OEM 12 c installation during 2-system upgrade database

  Hello

  I am trying to improve our 11.1.0.1 to 12.1.0.3 OEM production using the method 2-system.  When I try to keep in the database connection Details page after you have specified the connection details for the copy of the deposit on the new host, this error pops up:

  ERROR: ORA-00942: table or view does not exist

  Unable to connect to the database and validate is a database supported due to one of the following reasons:

  (1) credentials incorrect

  (2) the auditor may be out of service

  (3) database is perhaps out of service.

  Check the credentials, the status of the listener and the database, and then try again.

  This error is not moved when we used the same procedure to upgrade a test installation 11.1.0.1.  In addition, I tried to change the connection details to connect to the repository of original production and got the same error.  This seems to indicate that the problem is specific to this repository.

  I'm Tournai on sql trace for another chance and found this error in the trace file:

  The following statement has encountered an error during the analysis:

  "Select count (1) in the mgmt_targets where target_type = 'host' and target_name ='oem12c.gfcsap.com"

  Encountered error: ORA-00942

  This error is meaningless to me that mgmt_targets is present in the sysman schema.

  Any suggestions on how to move beyond this would be appreciated.

  Dave

  Hi all

  While explaining the issue to a colleague, it dawned on me that I had not thought sys could be running the query instead of sysman, in which case a synonym would be necessary.  I checked the test repository, and it had a public synonym for sysman.mgmt_targets.  The production repository was missing the synonym.  After you create the synonym in the repository of the production, I passed this stage.

  Dave

• RCU 11.1.1.6.0 with ADR 11.1.1.1.6.0 64 32-bit installation problem

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to develop the application for Admission online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g

  (2) the server application: Tuxedo 11 g

  3) web server: logic of Web 10.3.6.0

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and Campus Solution 9.0.

  In order to develop the application for Admission online for students from the perspective, I need to make 3 parts below:

  (1) ADR installation (Application Development, Runtime) 11.1.1.6.0 (64-bit)

  (2) install the RCU 11.1.1.6.0 to create the scheme of OWSM_MDS (32 bit)

  (3) create or expand the WebLogic domain

  I installed Oracle ADR 11.1.1.6.0 (64-Bit) with Weblogic 10.3.6.0 in machine Server Oracle Linux 5.1 with success.

  Now I install RCU 11.1.1.6.0 (32-bit), on step 2 of 7 database connection details, I face a problem like below:

  Type of database: Oracle Database

  Host name: 192.168.196.102

  Port: 7001

  Service name: HRCS90

  Username: weblogic

  Password: mypass

  Role: Normal

  While WebLogic Console is running which is http://192.168.196.102:7001 / console with the same username weblogic and password mypass,

  I have test the database connection. The message appears as below:

  Timeout connecting to the database. Current time is 30 seconds.

  While PeopleSoft is running, it is http://192.168.196.102:8000/psp/ps /? cmd = username , I use the same username and password to test the database connection. The same message appears as below:

  Timeout connecting to the database. Current time is 30 seconds.

  I was check the 7 fields above. I'm confused the field "Service name". I use the name of the database Instance "HRCS90" and the name of SID 'HRCS90' as the Service name. I don't know if it is correct or not.

  My questions are:

  (1) how to fix the "Time out when connecting to the database Current time-out is 30 seconds?"

  (2) how to find out the name of Service? Can I use Instance and SID 'HRCS90' database Service name?

  Thanks in advance.

  People,

  Hello. Service name is found. Connection to the base went through. The problem is solved by myself. Thank you.

• HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

  After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

  Hello @fede95,

  Thanks for posting on the Forum of HP and welcome!

  I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

  I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

  I'm looking forward to hear back and work towards the resolution of this problem.

  If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

• Displays the error message when download itunes and other updates, not microsoft... says mode without failure or installer problem

  Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.

  Hi PeterLloyd,

  (1) what is the complete error message you receive?

  (2) what version of Windows you are using on the computer?

  (3) updates are you referring?

  Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Installation problems Thrones and Patriots

  Hey everybody. I have installation problems with elevation of the thrones of nations with the Patriots. I installed rise of nations but the installation successfully Thrones and Patriots he wins in a file called CTW_New_World_Map_01_info_text.xml.18 and then says check to see if I have available disk space, or if the file is in use. It's a brand new model with no other games on it.

  Hi Riseofjohn,
   
  1. have you checked the disk installation for scratches or damage?
  2. don't you try to install the game in the other computer?
  3. What is the operating system that is currently installed on your computer?
   
  First of all I suggest to perform a disk cleanup and check whether the problem is resolved.
   
  The disk cleanup tool helps you free up space on your hard disk to improve your computer's performance. The tool identifies files that you can safely remove, and then allows you to choose if you want to remove some or all of the files identified.
  
  To use disk cleanup in Windows 7 follow these steps below.
   
  a. Click Start, click programs, accessories principally made, click System Tools and then click on disk cleanup. If several readers are available, you may be asked to specify which drive you want to clean.
  b. when disk cleanup has calculated how much space you can free of charge, in the dialog cleaning disc, scroll through the content of the files to delete list.
   
  

  Disk Cleanup dialog box

  c. clear the check boxes for files that you do not want to delete, and then click OK.

  For more options, such as cleaning of system restore and files copy of Shadow, under Description, click on clean up the system files, and then click the other Options tab.
  d. When you are prompted to confirm that you want to remove the files specified, click Yes.
   
  After a few minutes, the process is completed, and close the Disk Cleanup dialog box, leaving your computer more efficient and clean better.
   
  I also suggest you to run chkdsk.
  Follow these steps:
   
  a. click on start
  b. Type "cmd" in the start search box
  c. right-click on cmd.exe list programs and then select the run as Administrator option. If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  d. in the command prompt window, type the following command and press enter Chkdsk/r X:
   Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.
  a. press y when you are prompted to check the drive the next time the system restarts.
  b. close all applications and restart the computer.
   
  Note: upon reboot, Windows checks the drive for errors, and then Windows starts
  
  After the computer restarts, repeat steps 1 through 4 for the other volume and then check if the disk cleanup works.
   
  If the steps provided above does not resolve the problem then I suggest to install the game using the cleanboot and check for the issue.
  Put your system to the clean boot state helps determine if third-party applications or startup items
  the origin of the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and re-
  install the program.
  See KB Microsoft article below for more information on how to resolve a problem by doing a
  clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135  
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above KB
  article.
  I suggest also allows you to check the compatibility of the game with the Windows 7 operating system.

   

  To do this, you can visit this link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/         

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• XP Service pack 2 Installation problems

  I recently had to reformat my computer and reinstall XP Pro on it. I have already validated my windows. Whenever I try to get service pack 2, however, it gets to the point on the installer where it says 'check product key' (which is almost right at the beginning) and everything goes ever further. No matter how long wait he just stay here on this message. Help, please!

  SP2 installation hangs at step "product key Verification".

  Posted by another user having received a response from the MS Support: -.

  There are 3 steps that we have to do to get SP2 installed.

  The steps are:

  (1) please go to the CMD prompt (start / run--> cmd.exe)

  (2) then type cd /d %windir%\inf and make sure that we are in this directory.

  (3) then type ren oem*.inf oem*.old, he goes back to the command prompt after
  giving you an error (don't you worry about this)

  (4) then type ren oem*.pnf oem*.old1, he goes back to the command prompt after
  giving you an error (don't you worry about this)

  (5) then goto start - run - type '% windir%\inf' and you will see the files in
  the folder.

  (6) then find by name INFCACHE.1 file and make a backup of it on the desktop
  (by copying it to the desktop) and delete the INFCACHE.1 in c:\windows\inf.

  (7) close all windows and restart the computer in safe mode and start the
  installation of SP2 and it should be fine.

  I would check to make sure that you don't know what your product key is before
  attempt of what either especially if it is an OEM version.

  TaurArian [MVP] 2005-2010 - Update Services

• Applications and updates Windows installation problems

  Original title: using windows vista Installer problems and having

  nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

  Hi DaroldMILLER,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What applications/programs you install?

  ·         You install updates?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Problem installing programs and applications:

  Method 1: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Troubleshoot installing or uninstalling programs

   

  Problem installing Windows updates:

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Python in Windows 7 installation problems

  Hello. I tried to install the Python on my laptop (Windows 7 Pro) language using the Installer MSI Windows x 86 3.2.2 Python from www.python.org. During the installation, I right click and install as an administrator. The command line works very well, but I am unable to get Idle GUI to load. He thinks about it for a few seconds while the blue circle icon appears, then nothing - not even an error message.

  I tried other versions of Python - e.g. ActivePython, with the same result. It does not seem to make a difference, what version of Python that I use. Any help gratefully received!

  Hello
   
  1. you use 32 bit OS or 64 bit one?
  2. What do you mean when you say "I am unable to get Idle GUI to load"? Are you talking about the GUI for the window or the window of the software installation when you try to run it?
   
  Python 2.6 (32-bit and 64-bit version) are compatible Windows 7. It is suggested to install Python 2.6. Please visit the following link for more information. Windows 7 Center compatibility:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Python&v=Python%20Software%20Foundation&UID=2&l=en&pf=0&PI=0&s=Python&OS=64-bit
   
   
  Method 1: Boot your system in clean boot mode, and then install python 3.2.2. Try now to the KB article to perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.
   
  Method 2: You may need to run the following troubleshooter to install and run Python 3.2.2.
  Open the program compatibility troubleshooting utility:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter
   
  It will be useful.

• DB 12 c on the Oracle Linux 7.1 installation problem

  Hello

  I have installation problems of database 12 c on Oracle Linux 7.1, this is what I did and what is the result:

  Steps done in order:

  1. Configure a machine virtual box OL7.1 (has enough swap space, is fully updated and invited additions running)
  2. Install the package "oracle-RDBMS-server-12cR1-preinstall" to make sure that I have all the packages required pre
  3. Followed the additional configuration steps in this tutorial oracle-www.m-base.org/Sounds.html (permissive-selinux, exports .bash_profile, create the installation path, create users and groups required)-> https://oracle-base.com/articles/12c/oracle-db-12cr1-installation-on-oracle-linux-7#additional_setup
  4. Obtained by runInstaller installation and chose to install database software ONLY.
  5. Run the root.sh as root script, after that the installation was successful
  6. DBCA: Create database, mode, advanced, general use create as CBD (an APB called pdb1), EM express (Yes), rather than default storage settings, install the schema example, character set AL32UTF8, by default all the rest.
  7. Edit the/etc/oratab file by changing the N a y at the end of the last line that is now "data1:/u01/app/oracle/product/12.1.0.2/db_1:Y".
  8. sqlplus sys/oracle as a sysdba

  I'm stuck at 8, it's the following message is displayed:

  ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3640

  Additional information: 1543399787

  Process ID: 0

  Session IDs: serial number 0: 0

  I studied him that changing the/etc/file hosts to remove all the duplicate names could fix this error, then here is this that my/etc/hosts looks like:

  cat/etc/hosts

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Before I change anything, I would like to help, can someone go get where I left and gives me a step to ensure that this facility is set up correctly?

  I missed something?

  Comments are welcome!

  Your 7 step refers to an instance called data1, but you set your ORSCLE_SID to the cdb1. THERY can't be correct.

• Toshiba G450 - Wellphone Xt installation problems

  WellPhone Xt installation problems

  Great and thank you very much!

  Maybe it could be useful for other people who are looking for such a solution.

• Streets & trips 2013 details download installation problems...

  The installation seems to work, but the program may not be running.  Control Panel verifies that the software is installed (1.8 GB) while the installer has not created an S & T normal ICON and the software cannot be loaded even by clicking on the executable file in the program directory files. I have installed/uninstalled the program several times.  Turned off Norton antivirus and firewall and Windows Firewall protection. Restarted again and again. Nothing has worked...

  -Error message: "cannot find a network share or removable device, the DVD is not in the drive or installing this application is damaged.  Make sure that the drive you installed is attached, the DVD is in the drive, your network is connected, or run the installation again from its original installed location. (5-40003-6) ".

  ANYONE KNOW IF THERE IS A FIX FOR THIS PROBLEM YET?

  Hello

  Looks like you've already discovered the streets and travel Forum.

  Streets & trips 2013 details download installation problems:
  http://social.Microsoft.com/forums/en-us/streetsandtrips/thread/a3c90cf2-ab59-4f82-9404-a8cc0a9b9a05

  Concerning

• Vista computer displays "installation of Update step 3 of 3.0% completed, do not turn off" then turns off. This happens constantly .__Starting in safe mode does not disturb this cycle.__What do? tried to delete and reinstall memory.no joy.

  No recent changes to computer
  have you tried booting in safe mode
  I tried to remove/reinstall the memory chips
  don't have a recovery disk

  Quote your full version of Windows (for example, Vista SP1;) Vista 64 - bit SP2; Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Previous discussions (including answers) about this behavior: http://lmgtfy.com/?q=site%3Asocial.answers.microsoft.com+%22stage+3+of+3%22+%220%25+complete%22+vista

  Assuming that Vista and SP2 is not installed...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista Home Premium SP2 installation problems

  SP2 says its installed but Windows Update shows it as an available update. When I view the system information, it still shows only installed SP1. I tried the standalone install and I got error 0 X 80070564 connection failed. SP2 shows as has been properly installed on Windows updates the history but it shows also the lack of installation after 2-3 hours to install, restart, then back to sp1. I stop all AV, Spyware, adware, Windows Defender by other items on the SP2 installation problems. I also ran system preparation and the System File Checker. I am running Vista Home Premium 32 bit on computer laptop HP DV5 Dual Core. I have not found anything on the failure error connection displayed in the standalone sp2 update.

  Hello vinniegolf, welcome.

  I would recommend trying to create a new user account with administrative privlages and you try to upgrade to SP2 from here. This will tell us if it has something to do with the internal components of your user account.
  You can create an account via START > Control Panel > users
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ITunes update installation problem

  I am running Windows Xp Media Center Edition and I'm trying to update my iTunes to version 10.0, so I have the new software for my iPad. I try and install the software only to be greated by the error message 'FAILED errors when installing updates. "If the problem persists, choose Tools > download only and try to install manually" I also run Norton Antivirus - would - this interfere with my downloads?

  Hello

  Method 1: Try now to the KB article to perform the clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Method 2: Disable Norton and then try to download iTunes manually on the site and install it:

  http://www.Apple.com/iTunes/download/

  Important: Please do not forget to activate Norton after installing iTunes.

  If it does not help, you should contact Apple for support.

  http://www.Apple.com/support/iTunes/