HP Pavilion Gaming Notebook 15: Error Message received "the operating system is not currently configured torun this application."

Anyone happen to know what this error message is referring to, or what should I do?

It unfortunately and it does not say aything else. There only the option to click OK that closes just the box pop up.

Its been popping up randomly in the past several times I used the laptop. Initially I thought that it was because there was still thinking it would correct after the execution of the latter but its re-appeared again and updates to run. It does not ask respect or other options to solve the problem?

Send a print screen but don't know how?

I have not had this laptop of all (about 2 months) and don't expect to have problems of this kind already! Any help appreciated

Thanks in advance

Hello

This problem occurs because of MS Office (tails, corruption).

Try reinstalling Microsoft Office as follows:

1. uninstall all MS Office applications in a standard way via Add/Remove Programs, restart.

2. use instructions and special removal tools to remove completely all MS Office applications:

-office 2013 or earlier version: install this tool http://download.microsoft.com/download/0/e...16a296a/ork.exe, go to start-> all programs-> Microsoft Office-> Microsoft Office Tools-> Resource Kit Microsoft Office 2003-> removal Assistant, in the Removal Wizard, select 'Comepletely remove all versions of my previous Microsoft Office application' and follow the instructions;

-for Office 2007, 2010: http://support.microsoft.com/kb/971179

-office 2013, 365: http://support.microsoft.com/kb/2739501/en

3. manually remove all objects listed under:

-C:\Program Files\Microsoft Office

-C:\Program Files\Common Files\Microsoft Shared\OFFICE *.

-C:\Documents and Settings\All Users\Application Data\Microsoft\OFFICE

-C:\ProgramData\Microsoft\OFFICE

4 restart, make sure that the problem is not reproduced more.

5 install the necessary package of MS Office.

By clicking the Thumbs-Up is a way to say - thank you! ******
* Click on I accept as Solution on an answer that solves your problem to help others *.

I am an employee of HP

#HPExpertsday

Tags: Notebooks

Similar Questions

  • When I try to install the program on uniblue power I get an error message that the mia.lib was not found.

    When I try to install any programs, I receive the error message that the mia.lib was not found. What should I do to correct this?

    Hello
    Yes, it seems that this program is not running Windows XP. If the requirements for this program is Windows Vista or Windows 7, then the upgrade may solve your problem.

    I hope this helps. Just reply to the results.

  • Why do I get the message that my operating system is not supported?

    My computer is running Windows 7-64 bit. I have the latest softwear on my iPhone and my iPad. I installed edge inspect on these devices and have the advantage of Google Chrome to inspect the installed extension. I have enter my password strengthened for both devices in the Chrome extension. Why do I get the message that my operating system is not yet supported?

    It's VERY interesting... even if I got this weird message, once I connected my iPhone and my iPad to the extension of Google, it worked! See all what I automatically in Google Chrome displays in the application of edge inspect on small devices. It's clean! The only problem I see is that Adobe needs to replace the error message with information about the use of the application.

  • My operating system is Windows XP Home Service Pack 3. In the process of printing two jobs, first filled, but second one hung up. Error message was the print spooler does not.

    I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

    System in automatic mode but State of the said service stopped.

    I get error 1075: the dependency service does not exist or has been marked for deletion.

    Printer worked this AM, but stopped working between two print jobs.

    I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

    Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

    Thanks for your help

    Curry:

    I have followed your suggestion after that someone else provided the steps for me to do the program accept net start spooler.

    The error message was THAT SYSTEM ERROR 1075 has occurred.

    The dependency service does not exist or has been marked for deletion.

    If I need to reload the operating system, I have a back up saved on a hard drive.

    Do you know what file (s?) needs to be recharged?

    Thanks for your help.

  • ConfigFree - Radar continues to show an error message and the FN key does not work

    Error message: "wireless communication disabled. Please select a Wi - Fi using the Fn + F8 key". (Even when the wireless connection is active and works very well - hardware button works) problem is that pressing FN + F8 help is no longer.

    FN key not actually launch his menu at all. I have reinstalled ConfigFree, System Restore, searched relevant Toshiba Software or drivers, but nothing is.
    I have Toshiba Satellite P300-1 c 8, Windows Vista 32-bit.

    Help, please. Thank you.

    I see you have second similar thread about work flash cards.
    If you want to have it remove to new package of added value of the system, restart the computer and reinstall VAP.
    You can find it on the download under http://eu.computers.toshiba-europe.com page > support & downloads

  • Pavilion 23-q055na: hp not pavilion no noise at all, but no error detected by the operating system

    I installed Windows 10 on a brand new Pavilion - HP 23 - Q055NA and now no sound at all.

    Troubleshooting Windows Audio will return no error, the device drivers for each of the sound systems say they are up-to-date and 'works '.

    Device-> Manager

    The inputs and outputs audio

    Speakers (Realtek High Definition) Audio Driver Date 07/09/2015 Version 10.0.10240.16384

    Audio, video, and game controllers

    -CyverLink WebCam

    -Intel (RR) Audio display: 24/10/2014 Version 6.16.0.3160 driver Date

    -Realtek High Definition Audio: Driver Date10/08/2015 6.0.1.7580 Version

    The latest windows updates were installed: there was a problem with one, a reboot loop, but after power off the computer, which has disappeared, the computer has been updated and restarted again.

    I ran the update from the HP support and had some 6.0.1.7584 for Realtek Audio driver that fixed my problem

  • problem updating Itunes error message Apple mobile device Support could not be configured

    Tried upgrading my Ipad/Iphone for IOS5 requires the update to Itunes 10.5.1. Make several attempts and keep getting error message encountered Installer problems.before that support mobile device apple could be configured.    Any suggestions on how to fix.

    Hi Rhonda,

    You can view the following Apple Support article and see if ithelps.

    Problem installing iTunes or QuickTime for Windows

    You can also contact Apple support for further assistance.

    http://www.Apple.com/support/iTunes/

  • Cannot read Photostory. Error message: "a device inthi system does not work.

    After building a slideshow Photo Story 3, I'm trying to play and get the error message: "a device attached to the system is not functioning:.»

    Unable to identify this device.

    Any ideas out there?

    Hi ld1925,

    • Did you the latest changes on the computer?

    Method 1

    I suggest that you install the updated drivers for the graphics card on the computer by visiting the manufacturer of the card or the computer manufacturer's website and check if it helps.

    If the update of drivers help not then uninstalled computer display card drivers, then reinstall the latest driver update.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

    Use Add/Remove remove programs and Device Manager to uninstall the drivers for the computer.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    Method 2

    If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    Method 3

    If the previous step fails, see if the problem continues in a new user account.

    How to create and configure user accounts in Windows XP

    http://support.Microsoft.com/kb/279783

  • Why do I get an error message saying "the specific module could not be found" when opening an image?

    original title: RunDLL

    I get the window followed whenever I click on an image or a file:

    There was a problem starting c:\Users\Jim\AppData\Local\Temp\seitybu\sxxqrbw\wow.dll that the specific module could not be found

    Can anyone advise on how to fix?

    Hi Jim,.

    I suggest you to navigate to the location of the file in the error message and check if it doesn't matter what suspicious file is present. There could be opportunities that your antivirus software would have deleted a few infected file, but would have left a few remnants, which is the origin of the problem.

    I suggest you use Microsoft safety scanner and look for viruses in your computer.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Here is the link to launch the Microsoft safety scanner.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Let us know the State of the question, so that we can help you.

  • Unable to print PDFs from Gmail. Error message 129. Operating system is Windows XP. Google Chrome browser. No problem until 2 days ago!

    Unable to print PDFs from Gmail. Error message 129. No problem until 2 days ago. OS is XP. Google Chrome browser. Can someone please help!

    There is a bug in Google Chrome.

  • error message that the ink cartridges are not compatible

    I recently bought a HP Deskjet 1000 and installed and the cartridges that came with the printer do not work. It keeps giving me the error that they are not compatible with the way in which the printer is installed.  I followed all the instructions and everything reset and still say the same error.  I am using windows 7 64 bit

    Fix! The printer will not work without INSTALLING cartridges. All cartridges installation, do not wrote on the side, but those that come with the printer do most of the time.

    What happened after a few steps, after re - clean cartridges and unplugged the power? Same result?

    "" If I want to give THANKS, you can click the WHITE STAR to the LEFT, to give thanks!" »

  • I can't install Silverlight with my firefox browser. I get an error message indicating that my system will not support 64-bit silverlight.

    I have a 64 bit system running Vista home premium 6.0.6002 and Firefox 5.0.1. I can't load SIlverlight for netflix streaming?

    Hello zuzann, first of all please urgently update firefox and all of your existing plugins: there are dozens of highly critical vulnerabilities fixed since version 5 of firefox!

    Update to the latest version of Firefox

    https://www.Mozilla.org/pluginCheck/

    & what about silverlight: you must install the 32-bit version, because firefox is also a 32-bit application for now and will not work with plugins that are 64-bit.

  • try to download ring call central controller and get an error message on the microsoft logo will not test. Help!

    I have windows xp.

    You can try this: right click on my computer, click Properties, click the Hardware tab, click driver signing, click on ignore.

  • I can't send emails, this error occurs: warning Windows Live Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting.

    I removed the cache, history of navigation. temporary files - this started about a week or two ago.  The only thing Ive done is add google chrome.  I deleted and did a restore systems.  I ran virus scan, but think that there must be a virus in hotmail.

    Any suggestions?  I have very well to receive emails, just can't send. This isn't hotmail because I can send email fine from my daughters computer.

    Hi CaroleBurbo

     

    The problem is always related to Windows Live hotmail program. Please visit the link below to find a community that will support what you want in the right direction for hotmail live support.
    http://windowslivehelp.com/forums.aspx?ProductID=1

     

    I hope this helps.

  • Pavilion HPE H8 - 1360t: need to reinstall the operating system and software preinstalled on new hard drive on HP Pavilion HPE H8 - 1360 t

    My hard drive crashed while I have to reinstall my operating system and the software pre-installed on a new hard drive. I have no recovery disks. What should I do?

    Marcel, welcome to the forum.

    Here's a guide to help order you HP system recovery discs if they are still available.  If this isn't the case, you will need to purchase a full copy of the operating system.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

Maybe you are looking for

  • Confused about release of ICS DROID RAZR MAXX

    I thought that ICS was supposed to be released on the 4th, but now I see that they are always the phase devolopment, and that there is a test of current soaking. What are some realistic timelines of DROID RAZR MAXX running ics? Im just impatient, anx

  • Hello l have DOWNLOAD and installed sp3 but it is not in Add and remove programs

    Hello l have DOWNLOAD and installed sp3, but it is not in Add and remove programs, wrote sp3 system properties is so this work please help me thnx Original title: need

  • Folio 13-1000eo Bios password recovery

    I lost the bios password on a Folio 13-1000eo. A 'System environment [84884645]' error to say that massage, how can I recover/resett or disable this bios password SveinL

  • Upgrade ASA zero downtime

    I have a pair of ASA-5585-X in a failover active-standby configuration.  They are running the version of the software 8.4.3.  I'm looking to upgrade to 9.1.1.  From the release notes, I understand that, in order to perform an upgrade "no interruption

  • Photoshop yesterday updated - move the tool problem

    Hi allAfter the recent update (2015.1 20151114.r.301), I have a big problem with the tool move when I use the shortcut 'ctrl '. Whenever I use it, it seems to work in auto range mode (even if it is disabled) and move the highest layer in the stack.He