OfficeJet 6000 PDF (Mac OS) printing problems

Similar Questions

• HP Officejet 6000 E609 does not print in black

  Original title: HP Officejet 6000 E609

  My printer prints contained in the three color cartridges, but do not print black.  Just stopped working.  Printed test page shows color but not black.

  Run the HP cleaning tool, several times if necessary (HP Toolbox)

• OfficeJet 6000 E609a will not print from Mac applications.

  I can print the HP utility diagnostics, but I can't seem to get any Mac application to print anything. The pages are always hang in the queue with an unspecified error. I tried ALL the recommended procedures for the diagnosis of this problem, but nothing has worked.

  I have proposed several times, and it often works.  Make sure that your OS X is healthy:

  1. download and install Mac OS X 10.6.8 updated Combo.
  2 download and install the Apple for Mac OS X v10.6 HP printer drivers.

• HP Officejet Pro 8600 Plus - Duplex printing problem

  I use a printer Officejet Pro 8600 Plus (what is the best printer I've ever had, apart from this problem!).  I use it with Windows 8.1.

  He struggles for more than a few pages print using duplex.  The problem seems to get worse when I print a pdf file.  It starts to print very well and made a few pages, but then I get this message "error on HP Officejet Pro 8600.  "Could not print * name * folder.  It appears on the computer not the printer.

  Any suggestions?

  Thank you

  Hey there @operationorphan

  I just wanted to add my own suggestions here for the issue of two-sided printing that you had with your Officejet 8600.

  You can try to update the firmware: get the latest Firmware and updates

  If this does not help, try to uninstall the printer software , reboot the PC and reinstall the printer. This should dissipate all software problems.

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  See you soon

• OfficeJet Pro 8610: Mac and printer do not connect

  Hello

  I installed my printer operated a couple of months and it as a printer wireless to my MacBook. Everything went very well.

  Yesterday I tried to print a document, but my Mac was telling me that the printer was not connected, even if the two were connected to the same wifi. I turned off both devices, reconnected the printer for wifi on the way home the password, but nothing has worked. I decided to 'remove' the printer from my Mac in order to reinstall it again. The software is installed, but I'm stuck in one step:

  The printer is not and so I cannot connect my printer with my Mac, instructions say that you could also connect thorugh the printer using the Wifi the Printer Wizard. I plugged the printer several times to my wifi at home but I am not able to connect it to my computer, it does not find it.

  I am really grateful for any advice!

  Thanks in advance.

  Best regards

  Julia

  Welcome to the HP community @JETaubenberger ,

  I read about the problems that you encounter when you try to connect your Officejet 8610 to your Mac via the wireless network. I have a few ideas in mind that should help connect you again!

  • Try power cycling network devices:

  Turn off the printer and the computer and unplug the router for 1 minute (do not press the buttons on the router).
  Plug the router back in and wait another minute, turn on the printer and the computer and attempt to print something.

  • If the connection still does not, try the following steps in the following order:
  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Install the complete driver here: HP Officejet Pro 8610 e-all-in-one printer
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers

  You must be connected at this time, please let me know the result!

• ID CS5.5 Mac - transparency printing problems custom size 13 x 21

  I try to print a screen printing positive transparency. The document is 13 x 21. I have a roll of 13 extended transparency which I cut a 21 "piece. I print on an EPSON 1400.

  I can not get the output to this szie file. It cuts the image within 8.5 x 11 limit each time.

  I have:

  -set a custom size in the print dialog box

  -Click on Page Setup in the print dialog box and set the custom size here, ignoring the warning to the subject it is not not printing ID dialog box

  -l' Preview in the dialog box will look perfectly oriented to the right size in the small tile

  -J' have tried everything I can think of to try to get in sync and correct output formats

  -I went to the PDF to try, fail again

  Is there someone who can help with some step by step to a process that works?

  Adobe ID CS5.5, EPSON Stylus Photo 1400, Mac Lion 10.7.5

  Only, I can't understand how this could be so difficult and little intuitive. Any idea would be freaking wonderul.

  Wow! Sudden incidental finding on this incredibly frustrating issue.

  I had found information that the EPSON 1400 should be able to print 44 "long output by default. I was looking specifically for one to find people who had printed large and panoramic images and came across a photography website of the United Kingdom where a person mentioned that he had written a software that would allow this printer print beyond 44 ". That sounded a lot.

  BUT, the last post on the thread of a guy says how he was able to print up to 44 '' for an EPSON 1400 with ease. The solution, said, was that the WIDTH of the print in the page layout area must be LOWER at 13 ". Why? No explanation.

  So I reset my size custom at 12.5x21 inches and BAM! First attempt to InDesign printed successfully. I can work with the margin.

  Anyway, in the case that everyone runs into this problem, it works. Here is a link to the post of 2009 that mentions this as info about printing more than 44 ".

  This one is solved.

• HP OfficeJet Pro 8500 a: unusual printing problem

  When I click on the "print" button I get the following message: -.

  Word cannot communicate with the printer

  There are several possible reasons:

  • There may not be enough memory available. Try closing files and programs you don't use.
  • Your printer or driver that maybe isn't setup correctly. You may need to adjust your printer settings.
  • If you use a network for printing there may be a problem with the network connection or the printer driver.
  • There may be loose cables or a bad connection between your computer and your printer.

  ---------------------------------------------------

  If I click on 'Print' in the file menu drop-down I can send the document to the printer. (No Communication problem?)

  When it reaches the printer it shows an error of: -.

  'PAPER JAM' - "clear paper jam and then tap OK."

  If I don't do anything but press 'OK' cycles a blank sheet of paper through the printer then prints my document!

  I am confused about if I have one or two problems and would appreciate any help anyone could offer.

  Hey there @Monners!

  Thanks for posting on the HP Forums!

  I see you have a little a problem of confusion when printing from your MS Word documents.  The best way to check the hardware of the printer in order to ensure that it works properly is to make a copy of photo stand alone.  If the printer is able to copy with giving a paper jam problem then the material is OK and you are probably looking to a software problem.

  If your persistent paper jam issue during a photo copy follow this document:

  If his only past not when printing from Mac I suggest to reset the printing system in Mac and add the printer again.

  To reset the printing system:

  1. click click the apple in the upper left corner of the mac

  2. click on System Preferences

  3. click on printers and scanners

  4 hold down the CTRL key and click with the mouse in the empty space under the name of printers

  5. click on reset the drop-down list printing system

  6. you should get a color wheel and the printer should disappear

  

  To add the printer again

  1 go back to printers and scanners

  2. click on the sign plus (+) sign under the list of printers

  3. in the add a printer window, select your printer and click Add

  4. try printing again!

  

  Please post back and let me know if this worked for you!

• HP Officejet Pro 8600 Plus "unspecified printer problem.

  I've just set up my HP Officejet Pro 8600 Plus e-all-in-one.  The establishment seemed fine, but when I go to the tab "devices" to "HP" connected there a sign yellow and says that I have a problem with my printer.  When I click on the symbol of the performance, the box says that "a non specifiedproblem has been reported." Please check your printer. ' When I check the printer control panel, there is no reported problem.  The machine seems to print OK, but I want to clarify this error that appears.  Any ideas?

  Also, I've done the restart and sign-off/sign-in stuff, so we can move on to the second order troubleshooting.  Thank you.

  Welcome to the HP support community!

  This error has been reported several times here on the Forum and still no resolution of HP.

  I have the same printer and the same error is reported.  While inconvenient, feel free to ignore it!  :-)

  WyreNut

• Officejet 4500 with Mac wireless connection problems

  I have a Macbook Pro running 10.7.5 and an Actiontec PK5001A router (recently replaced).  I went through the installation on the 4500 Wizard and everything was fine.  Run the wireless network Test report and not found problems so it must be in communication with the network.  When I go to add a printer Officejet 4500 shows but only as a fax.

  Pilots are underway.  Any help would be appreciated

  Hello

  Try resetting the printing system and check to see if that can help you:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now try to add the printer again.

  If the same persists, try to install the following package and then try to add the printer again:

  http://support.Apple.com/kb/dl907

• OfficeJet 8500 all-in-one - printing problem

  My all-in-one Officejet 8500 not print correctly. I checked the cartridges and they are ok. I get out a faded print with lines through most of the colors other than black. What could be the problem?

  Hello
  Seems to me that you must clean the pens.

  You can do it following the steps here:

  http://support.HP.com/us-en/document/c02208875

  You need clean the print heads and align them to solve your problem.

  I hope this helps.

• Someone from HP can tell us when you will correct the C4580/Mac wireless printing problem?

  Like so many other posts on this forum "to support", my C4580 goes into sleep mode and wake up. I have already sent my printer original back, received a replacement and it has the same problem. Brutal...

  Just got the phone with the help of HP, and he said that HP is working on a fix. HP support by phone was always quite useful, but maybe they need to hire some new engineers.

  I see messages from November on this bug, and they do not always have a difficulty?

  This has been an absolute time thief. Next purchase of printer for me: Cannon.

  The Hewlett-Packard Company released an updated firmware for the problem which occurs on the Photosmart series C4500 and Photosmart C4400 series. Updates are currently available for use on the Windows operating system.

  The following links can be used to find the software for the two affected products.

  Update critical to prevent and does not state for Photosmart series C4400

  Update critical to prevent and does not state for Photosmart series C4500

• HP Officejet Pro 6830 e: head printer problem

  I just started having problems of printer head.  Used doctor Scan, plugged and unplugged the printer, the computer restarted and all the steps that they have you spend and still, it gives printer error reading head.  Someone had a bit of luck with clear up this problem?

  You will need to contact HP for service.  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
   
  File number and phone number are displayed.

• HP Officejet 6000 E609n series 'disorder with detected printer.

  Original title - HP Officejet 6000 E609n series

  Printer does not print.  Connected to the network - ok.  Troubleshooting not detected any specific error but listed "trouble with printer detected" at top of list.  Printer agrees and sends the sheet of paper through but it comes out of the Virgin.  This s the only printer on the network and is set as the default printer.

  Hello

  1 did you changes to the computer before the show?

  2. what operating system you have installed in the computer?

  The instructions will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Method 1: Run the fixit:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: R the print spooler service and delete the print queue 

  Start the print spooler service in the Services console

  1. click on Start, clickrun, type services.mscand click OK.

  2. right click on the print spooler service and then clickstop.

  3. right click on the print spooler service and then clickStart.

  Start the spooler service for printing at the command prompt

  1. click on Start, clickrun, type cmdand then click OK.

  2 type the following commands at the command prompt:

  net stop spooler
  net start spooler
  Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows7/view-pause-or-cancel-printing

  Method 3: Follow the steps in the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Delete and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• Cartridge, HP 920 XL: Wireless HP Officejet 6000, the problem of black ink printer

  I have a HP Officejet 6000 wireless printer.  It's 2nd HP 920 XL cartridge that has not worked.  It does not show that it is empty, but it will not be printed.  Our school cannot afford to replace these at this rate.  Please let me know what to do to make this work correctly.

  I removed the printer as my default so that I could use another printer.  When I ran the program again to check for problems, the guest asked me to add the printer returned as default.   When I reconnected it the printer as long as my default, I tested the printer and it worked.  Don't know why remove and then add back in the set, but he did.

• Officejet 6000 printing problems

  My Officejet 6000 will not print. The power and light of the resume light blink - normally, this means that there is a paper jam in which there is not. Or that the rollers need cleaning I did. I also cleaned the cartridges where the ink comes out.

  Also I tried to unplug the printer and try again without success. When the power is connected, the green light - after a few seconds it starts to blink and the printer goes into his routine of cleaning after this stop the Summary button illuminates and flashes also. I'd love to hear if someone has the same situation and managed to solve it!

  Have you removed all paper from the input tray and look in the status bar with a flashlight to make sure nothing is caught in the rollers?

  So, did you remove the module front/back/rear access door to make sure that nothing is stuck to the back of the rolls?

  I also advise to open the upper part of the printer and remove all of the ink provides unit; including the print head.  Don't you see that anything taken under/the print head Assembly all about?

  Hard reset of the printer with the supplies out of the unit:

  Unplug the unit when turned on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug the unit back to

  Once the device is fed up reinstall ink supplies in the printer.  Also check to see if the truck can slide left and right all the way inside the printer by hand.

  There is also a document with additional steps found here.  I hope this helps.