offset and the multiplier
Hello
I want to start this graph from scratch by changing the offset property and the multiplier chart. How can I do this?
-It will be nice if you can crop or only required post image/screenshot region instead of this huge screenshot including very little info.
-Graphic right click > properties > scale > you have the required parameters.
Tags: NI Software
Similar Questions
-
The timeline indicator is offset and the shadows on the time scale.
I have four questions relatively minor but still boring.
1. the indicator of chronology is compensated. Visual quantity remains the same regardless of the zoom timeline, that this also applies to some tools.
2 markers are shifted to the right when it is placed.
3. I get ghost images in the Panel noticed when the timeline scrub.
4 white lines appear on the time scale that the cursor moves on the screen. (No mouse clicks)
I did due diligence and asked around on some forums and searched the FAQ section and so far it seems to be isolated.
OK problem SOLVED :-)
If you have the size of the text on your PC that is greater than 100%, it seems to be the cause.
Control Panel > appearance and personalization > display > set to 100%
This was brought to my attention by NTV on a similar thread here.
The only other problem is now that the text on the screen is a bit small. But I will get used to that pretty quickly and the new Premiere Pro works fine again.
-
How to use offset and multiplier in waveform graph?
Hello
I m using a waveform graph and I wanted to update its the x axis scale depending on the value of the multiplier. Also how this
shift multiplier formula n works (deltaX) * X + X 0? What is delta X and X?
Kind regards
vijtin
Hello
X 0 is the offset, and X is the multiplier. If the graph will start at an offset issue and will be aa at the time value delta multiplier.
for example
If you have these X-values normal: 0; 1; 2; 3; 4; 5 and a multiplier of 2 and 5 ofset you would get the result on the X - as = 5; 7; 9; 11; 13
Hope this helps
-
Error:-200277 is not a valid combination of the position and the offset in mx data acquisition
Hello everyone, I use a NI SMU 6361 DAQ in LabView 2013 (32 bit) to acquire samples from six sensors (currently). The signal is a bit noisy, but behave correctly after filter software by averaging, so I dug a little and found the code shown by NOR in this video:
https://www.YouTube.com/watch?v=fkIYp1mqp_g
So far, it has worked great, the loop basically takes anything to run and gives me a signal clean and Nice, but when VI starts first of all, I get the error code mentioned in the title, by saying that I am referencing a non-existent sample, since it is before the first (example 0). He has absolutely zero effect in the real VI, since if I hit continue, it works fine, but as it is for end-user oriented, I don't think they like to see a mistake every time you start up then, did somebody encountered this problem? And if so, how do solve you? Any ideas to spend at least the error message? So far I have tried:
-Insertion of a sample of reading the real while loop, no luck
-Insert a wait for completed task, gives me a timeout error
-Which in fact a little wait to not round, no chance
EDIT: Please ignore the loop for now, it has been used just to show if the data has been formatted correctly and will be used for filtering software, but has no effect on the error.
I'll take a shot at your comments:
-When I run with a simple/general error handler outside the while loop, it reports no errors
-When the error handler is inside the loop (after the reading) it sends the error message, but doesn't give the option to continue
-When I run all at once, with a real constant for the stop condition, it reports the error of loop
-When I run on the execution of highlight mode, it does not report the error once again
All relate to the thrust of the error that you can not collect samples which are periods of sampling of 2000 in the past until the task is run at least 2000 sampling periods to capture.
1. the error in the loop tunnel is only retains the last value of the error. Probably, the loop runs several times where the error is generated, but never seen. Once spent enough time to get samples of 2000 in the buffer of data acq, subsequent executions no longer produce an error. If you stop the loop after this date, the most recent error value is indeed "no error".
2. Yes, you see the error that happened on the iteration 1. The time required to respond to the dialog box is quite probably a long time you * only * see the error on the iteration 1.
3 Yes, as described above.
4. the code runs pretty slowly for the start time of the task until you come finally to the first Read DAQmx is longer than the 2000 sampling periods. Once again, Yes.
Couple of several things:
-Bob comments are super useful and important to keep. Auto error handling behavior are a real subtlety in LabVIEW, not at all intuitively obvious because almost any other terminal output can remain unwired without consequence.
-J' threw together a quick example, mess of my notice to loop before calling with offset = 0. The following works fine without error on my end, using a desktop computer X - card in the series similar to yours. I ran 4 channels at 100 kHz, and then again at 1 kHz without error. The case of 1 kHz took the second planned couple to run to completion and the first Offset = 0 reading has done its job. You can save the pic (save in png format) and then drag the file on an empty LabVIEW diagram to get the instant code. Adjust the device, channels, sampling according to your needs and tell me what you get.
-Be sure wiring in the 'NB of samples' entry on the call of DAQmx Read! When I removed this thread in the example below, I saw your error also. You must connect this number of 2000.
-Kevin P
-
Why they have been modified by their traditional symbols that have been used for centuries and are universally accepted?
The standard computer keyboard is derived from the keyboard terminal teletype, which is in turn derived from a standard typewriter keyboard that did not have these two mathematical operators.
The basic ASCII code set has them nor even if it does not include the more obscure characters like tilde ~ and the hose. characters. Maybe it's partly because computer simply math multiply and divide operators do not exist, either because they exist not on the keyboard, how do you type them.
Once computers started being used in anger operators were necessary but ASCII and keyboards were well defined, an alternative was developed.
-
Offset of the user interface after update of El Capitan
Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:
/ Library/LaunchAgents
~/Library/LibraryAgents
/ Library/LaunchDaemons
/ Library/Caches
~/Library/caches
and many other files like these.
None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.
Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.
Thank you
Caulin Bloom
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Registers at offset and graph of waveform for function tare - strain readings
Hello users,.
My goal is to put a strain given to zero when the strain has an initial reading. I guess that it will provide records shift in combination with the structure of the case. I tried to use two waveform graphs - showing the offset of the strain and the other showing the strain calibrated, so it will be clearer to see the stabilized strain before the reset button is set to force the strain in the calibrated chart to start from scratch. Is it possible to do?
Kind regards
Helen
Helen, you need not cross-post the question in several boards of Directors. It is a question of LabVIEW and LabVIEW, fortunately, is one of the most active panels.
So, it looks that you want to have a zero cases that calibrates your strain of reading that would be offset by reading than zero cases. Otherwise, you want to be continuous playback using the zero defined previously.
A simple solution for this is to put just a case structure within your loop of producer that is activated with a single button "channel zero". When this button is pressed, it takes the last points of data that have been read and creates a lag, so that the new data are now scaling as it.
How is this look:
If you plan to increase the size of this application, you should watch State Machine architecture or the messages in queue manager if you have a lot of data processing. This structure unique case for zero setting can only get you so far until it's hand.
-
How to lose the multiplier effect of windows 8
Hello
I use the latest version of windows 8 x 64 pro version was updated with the latest drivers from wacom cintiq.
I notice some issues that have not seen before our upgrade to window 8 companies.
(1) the multiplier effect of windows 8 every time I put the wacom pen to the canvas in Photoshop... (incredibly annoying...!) Please
Tell me how to disable this(2) drag delay... I'll do a stroke and have a period of 2 seconds on the canvas... don't know if it's a windows thing or a problem of ps... but the calculation is plundered regarding ram and gpu...I never had these problems with win 7. I can deal with the delay of drag... l but the ripple effect is extremely annoying. All n all the Member States, you keep dropping the ball with win 8, Xbox and surface. You are losing loyal customers. He figure out!
Hello
Remember to update the BIOS, chipset and drivers. Check with the system/motherboard
Manufacturer for those and also manufacturers of real devices. If the problem persists check with Wacom
Supported. Other possibilities include startup due to a conflict, including antivirus programs.
security programs although there may be others.Wacom - Support
http://us.Wacom.com/en/supportWacom - community
http://community.Wacom.com/Update driver and troubleshooting details (don't forget to check for BIOS, chipset,
(and other drivers):
Microsoft - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWhat happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctlyDriverView Run - the value SEEN drivers hide Microsoft - update those without drain in
their names. (Also update BIOS and drivers from the chipset in the system/motherboard)
The manufacturer's website.)Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
BIOS, drivers low-level chipset and drivers of devices shipped major. Run
DriverView - value VIEW drivers hide Microsoft - update those without drain in their
name.-Free - DriverView utility displays the list of all device drivers currently loaded on your
System. For each driver in the list, additional useful information is displayed: load address
of the driver, description, version, product name, company that created the driver, and
more.
http://www.NirSoft.NET/utils/DriverView.htmlTo check system drivers manufacturer as replacements and camera manufacturer who are most
current. Control Panel - device - Display Adapter Manager - note the brand and
fill out the template tab of the driver for your card video - double-click - write down the
the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
3rd party with their own software and drivers and the other main device drivers you
a.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
(Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
After each installation.Always check in the Device Manager - drivers tab to be sure the version you install
actually arises. This is because some restore drivers before the most recent is installed
(particularly that audio drivers) so install a driver - reboot - check is to be sure
installed and repeat if necessary.Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
manually check by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm========================================================
More troubleshooting if necessary:
Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
online resources and the drivers and ask questions in the forums about known problems.
Updating the BIOS , drivers of low level chipset and embedded and separate major
device drivers (anyone who can have an impact on the speed of startup and performance).Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the office and
Splash screen.Check startup programs.
Right-click in the left lower corner - Manager of tasks
Or Windows key + X - Manager of tasks
Or right click on the taskbar - task managerCheck the Startup tab.
More troubleshooting:
How to perform a clean boot for a problem in Windows Vista, Windows 7,
or Windows 8
http://support.Microsoft.com/kb/929135Other programs to help:
Autoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx-----------
Especially what antivirus/antispyware/security program do you use? Windows 8
comes with Windows Defender, which is a complete antivirus based on MSE in Windows 8.
If using a 3rd party program uninstall it and run the removal of its creator tool to prevent
remains. In most cases Windows Defender automatically recharges.List of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91Uninstallers (removal tools) for common antivirus software
http://KB.eset.com/esetkb/index?page=content&ID=SOLN146=======================================================
Try these to erase corruption and missing/damaged file system repair or replacement.
Windows key + X (or right click in the lower left corner) - (Admin) command prompt
C:\Windows\System32\ >
At the prompt, type in SFC/scannow above
(There is a space between C and /)How to run the command "SFC/scannow" at startup or in Windows 8
http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html-----
Then run CheckDisk (chkfdsk/f/r)
File (formerly Windows Explorer)
Right click on drive C: - Properties - tab tools - error checking - Check
Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-driveHow to check a drive for errors with "chkdsk" in Windows 8
http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html=======================================================
These should help:
Ways to improve the performance of your PC
http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performanceMaintenance & performance
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286=======================================================
If necessary:
Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
settings) or even a restore. Be prepared to re - install the programs, applications will remain.
And having redundant backups of your files on the disk main hard is always a
good idea.Windows 8 includes special discount methods (keep files and settings) or a reset
(new installation remove all).How to restore, refresh or reset your PC
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351How to update Windows 8
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlIf you need a repair disc:
Create a system repair disc
http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-discHow to create a "system repair disc" (CD/DVD) in Windows 8
http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.htmlHow to create a recovery USB in Windows 8
http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
And the good old CC Desktop Update bug is back!
I thought that this problem had been corrected since the last updates went well, but he's back. The process of updating Office CC goes until the progress bar shows 100% done and then CC office closes without any error message. It is impossible to revive CC Desktop or uninstall from the control panel ("you cannot uninstall because some applications remain CC Desktop" - a kind of problem of the hen egg).
Anyway, as usual, the only way to solve this problem is manually uninstalling and reinstalling the CC Office. With the help of 10 64-bit windows.
Really fed up with this bug which is sustainable for years.
Errors reported by the event viewer:
Name of the failing application: Adobe CEF Helper.exe, version: 3.7.0.271, time stamp: 0 x 57515883
The failed module name: libcef.dll, version: 3.2171.2069.0, time stamp: 0x551bdc44
Exception code: 0xc0000005
Offset: 0 x 00444106
ID of the process failed: 0 x 1544
Start time of application vulnerabilities: 0x01d1cbc82aca7212
The failing application path: C:\Program Files (x 86) \Common Files\Adobe\Adobe Office Common\HEX\Adobe CEF Helper.exe
Path of the failing module: C:\Program Files (x 86) \Common Files\Adobe\Adobe Desktop Common\CEF\libcef.dll
Report ID: a17bbcab-c6a5-43c6-8c78-42d925412989
Faulting full name of the package:
ID of the failed package-parent application:
===============================================
Name of the failing application: Adobe Desktop Service.exe, version: 3.7.0.272, time stamp: 0x5757cc50
The failed module name: AdobePIM.dll_unloaded, version: 3.7.0.271, time stamp: 0x57515a0c
Exception code: 0xc00001a5
Offset: 0x0017df96
ID of the process failed: 0x1ac4
Start time of application vulnerabilities: 0x01d1cbc82acffec2
The failing application path: C:\Program Files (x 86) \Common Files\Adobe\Adobe Office Common\ADS\Adobe Office Service.exe
Path of the failing module: AdobePIM.dll
Report ID: 9ba93717-a749-4e22-ba37-0e74ef361bd3
Faulting full name of the package:
ID of the failed package-parent application:
Hi photophils,
I had the problem with the last CC Office. Here is how I fixed it...
Once the installation process has failed and the window is closed without any error message, I could see the following folders were present on my system:
-C:\Program Files (x 86) \Adobe\Adobe creative cloud (former)
-C:\Program Files (x 86) \Adobe\Adobe Creative Cloud_
(a new one) -C:\Program Files (x 86) \Adobe\Adobe Creative Cloud_bkp1 (a backup, I guess)
All of these issues are similar.
What I did:
1. deleted (or renamed) file Adobe Creative cloud after a logoff / logon (because this file is still in use after the update crashed).
2 renamed Adobe Creative Cloud_
Adobe Creative Cloud. 3 deleted Adobe Creative Cloud_bkp1.
After that, I could launch new Office CC without re - update.
As the 3 steps above are sufficient to complete the installation, it seems that the installer fails when you try to do the same.
-
Offset and IGNORE NULLS for LEAD/LAG
Hi all
so far, I thought that I understood the functioning of LEAD and the DELAY, but after you add the IGNORE NULLS and a shift, I'm confused
I created a Fiddle SQL that executes a 11 g R2, v$ version returns Oracle Database 11 g Express Edition Release 11.2.0.2.0
CREATE TABLE vt (part INT, ord int, val INT); INSERT INTO vt VALUES(1, 1, 8); INSERT INTO vt VALUES(1, 2, 10); INSERT INTO vt VALUES(1, 3, 3); INSERT INTO vt VALUES(1, 4, NULL); INSERT INTO vt VALUES(1, 5, NULL); INSERT INTO vt VALUES(1, 6, NULL); INSERT INTO vt VALUES(1, 7, 2); INSERT INTO vt VALUES(1, 8, NULL); INSERT INTO vt VALUES(1, 9, 5);
-
How to add the offset to the items of id for the page scrolling
Hello world
I use jQuery scrolling page which requires jQuery easing, and I applied scrolling page class ID to several elements of the image throughout the site. He is also working on the elements of the section of the site.
The issue I'm having is when any category id are selected in the navigation bar, for example in 'services', click on "Why choose us" in the drop-down menu, you will see it scrolls to this element, but it is placing too high up on the screen and part of this element is covered by the upper navigation bar.
What I want to do, it's somehow add an offset from the elements id so that he finds a little lower on the screen just below the navigation bar, as it does for the elements of the section of the site. For example, 'our team', which is placed in a section works fine.
Please see website link and jQuery code for below.
http://www.clockdoctors.co.UK/test/
jQuery for the functionality of scrolling page - requires the plugin of jQuery acceleration
{$(function()}
$('a.page-scroll').bind ("click", {function (event)}
var $anchor = $(this);
$('html,_body').stop (.animate({))
scrollTop: $($anchor.attr ('href')) .top () may
(}, 1500, "easeInOutExpo");
Event.preventDefault ();
});
});
I see. in this case, you may need to add an offset spesific for different updates page with anchors and based on the location of where change of resolution:
you would use ID at all that will change your layout and you don't want that. in this case change all your refferals in a label - anchors
and then in the CSS position them based on the resolution in a relative path:
CSS:
{#myName}
position: relative;
Top:-100px;}
In short: all the ID change them as anchors instead of ID, then according to the resolution change the value at the top so it fits perfectly in all the page layouts.
PS. my suggestion if possible rather collapse the header make more minimalist height when the user scrolls down, so it's less work and it takes less space in the content.
-
Intermittently, jumping to the first and the second slide instead of the conditional action
Hello
I have an action on the first slide in my Captivate program (7 Captivate), (press Enter) which says that if your variable = this, go to a slide specific (v_lastmod = 1, jump to slide 4) and I have about 19 of these if statements in the action.
What I notice is sometimes (intermittently) rather than to go to this particular slide, he would go to the first slide and continue on the second slide (and obviously not stop there since there is a pause button). If I click on update, then it reload again and go to the slide by the action.
I tried to add a loop where the else statement repeated the action, just in case it might be a problem of preload? That doesn't seem to work. It would be just stuck on the loop. I also tried to add a preloader by default preload that Captivate and always intermittently it crosses the first slide and just keep to the second slide (unless I hit refresh, it will take me to the appropriate slide). I also tried to add Else, keep, but no change.
Any ideas or suggestions?
Thank you
Ruth
It is not a good idea to have such a pretty complicated advanced right action on enter to the first slide. It must be generated at run time and the offset is probably what you see. Try adding a short welcome slide before this slide, which has no action on enter. That might solve your problem in a simple way.
-
Cannot call the multiply() on null object
Hello
when im trying to follow the tutorial of rich Web Applications with Oracle ADF development in this link http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_55/jdtut_11r2_55_3.html
and in part (to add to your Page CRUD operation components) by pressing the CreateInsert I got the error message cannot invoke method on a null object multiply(),.
newspapers such as below
< Utils > < buildFacesMessage > ADF: adding the following JSF error: can't call method multiply() on null object
java.lang.NullPointerException: cannot call the multiply() on null object
at org.codehaus.groovy.runtime.NullObject.invokeMethod(NullObject.java:77)
at org.codehaus.groovy.runtime.InvokerHelper.invokePogoMethod(InvokerHelper.java:750)
at org.codehaus.groovy.runtime.InvokerHelper.invokeMethod(InvokerHelper.java:727)
at org.codehaus.groovy.runtime.callsite.NullCallSite.call(NullCallSite.java:17)
at org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:40)
at org.codehaus.groovy.runtime.callsite.PojoMetaMethodSite.call(PojoMetaMethodSite.java:54)
at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:125)
at bc4j_model_EmpDetails_AnnualSalary_null_gs.run(bc4j_model_EmpDetails_AnnualSalary_null_gs.groovy:1)
at oracle.jbo.ExprEval.internalEvaluateGroovyScript(ExprEval.java:1200)
at oracle.jbo.ExprEval.doEvaluate(ExprEval.java:1253)
at oracle.jbo.ExprEval.evaluateForRow(ExprEval.java:1075)
at oracle.jbo.server.AttributeDefImpl.evaluateTransientExpression(AttributeDefImpl.java:2131)
at oracle.jbo.server.ViewRowStorage.getAttributeInternal(ViewRowStorage.java:1827)
at oracle.jbo.server.ViewRowImpl.getAttributeValue(ViewRowImpl.java:1962)
at oracle.jbo.server.ViewRowImpl.getAttributeInternal(ViewRowImpl.java:824)
at oracle.jbo.server.ViewRowImpl.getAttrInvokeAccessor(ViewRowImpl.java:906)
at oracle.jbo.server.ViewRowImpl.getAttribute(ViewRowImpl.java:854)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGetAttributeValueFromRow(JUCtrlValueBinding.java:1213)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeFromRow(JUCtrlValueBinding.java:764)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getInputValueInRow(JUCtrlValueBinding.java:3004)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getInputValue(JUCtrlValueBinding.java:2852)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getInputValue(JUCtrlValueBinding.java:2841)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding.getInputValue(FacesCtrlAttrsBinding.java:183)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGet(JUCtrlValueBinding.java:2416)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding.internalGet(FacesCtrlAttrsBinding.java:275)
at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:749)
at javax.el.MapELResolver.getValue(MapELResolver.java:164)
at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
at com.sun.el.parser.AstValue.getValue (unknown Source)
at com.sun.el.ValueExpressionImpl.getValue (unknown Source)
at com.sun.faces.facelets.el.TagValueExpression.getValue(TagValueExpression.java:109)
at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)
at oracle.adfinternal.view.faces.renderkit.rich.ValueRenderer.getValue(ValueRenderer.java:184)
at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputBaseRenderer.renderContentStyleAttributes(SimpleInputBaseRenderer.java:512)
at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputBaseRenderer.renderNonElementContent(SimpleInputBaseRenderer.java:397)
at oracle.adfinternal.view.faces.renderkit.rich.FormInputRenderer.encodeAllAsNonElement(FormInputRenderer.java:300)
at oracle.adfinternal.view.faces.renderkit.rich.FormElementRenderer.encodeAll(FormElementRenderer.java:160)
at oracle.adf.view.rich.render.RichRenderer.delegateRenderer(RichRenderer.java:1700)
at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.renderFieldCellContents(LabeledInputRenderer.java:228)
at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.renderFieldCell(LabelLayoutRenderer.java:528)
at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.encodeAll(LabelLayoutRenderer.java:305)
at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.encodeAll(LabeledInputRenderer.java:215)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeFormItem(PanelFormLayoutRenderer.java:1088)
in oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.access$ 100 (PanelFormLayoutRenderer.java:50)
to oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$ FormColumnEncoder.processComponent (PanelFormLayoutRenderer.java:1604)
to oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$ FormColumnEncoder.processComponent (PanelFormLayoutRenderer.java:1523)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeChildren(PanelFormLayoutRenderer.java:420)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.encodeAll(PanelFormLayoutRenderer.java:208)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:447)
to oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$ 1500 (PanelGroupLayoutRenderer.java:30)
to oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$ EncoderCallback.processComponent (PanelGroupLayoutRenderer.java:734)
to oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$ EncoderCallback.processComponent (PanelGroupLayoutRenderer.java:637)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:360)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeFacet(DecorativeBoxRenderer.java:440)
at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer._encodeCenterPane(DecorativeBoxRenderer.java:704)
at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeAll(DecorativeBoxRenderer.java:380)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeFacet(DecorativeBoxRenderer.java:440)
at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer._encodeCenterPane(DecorativeBoxRenderer.java:704)
at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeAll(DecorativeBoxRenderer.java:380)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:879)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:1294)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeMiddlePanes(PanelStretchLayoutRenderer.java:351)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:316)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:274)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1277)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1655)
at oracle.adfinternal.view.faces.component.AdfViewRoot.encodeAll(AdfViewRoot.java:91)
at com.sun.faces.application.view.FaceletViewHandlingStrategy.renderView(FaceletViewHandlingStrategy.java:399)
to org.apache.myfaces.trinidadinternal.application.ViewDeclarationLanguageFactoryImpl$ ChangeApplyingVDLWrapper.renderView (ViewDeclarationLanguageFactoryImpl.java:350)
at com.sun.faces.application.view.MultiViewHandler.renderView(MultiViewHandler.java:131)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:273)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:165)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:1027)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:334)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:232)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged (Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
< Utils > < buildFacesMessage > ADF: adding the following JSF error: can't call method multiply() on null object
any help please?Hello
your entity or vo can have an attribute that has an expression that miltiplies two operands on which one operand is attribute and other can be attribute or number as
Attr * 2
or
Attr1 * Attr2
In you need to handle a null as a condition
(Attr1 == null ? 0 : Attr1) * (Attr2 == null ? 0 : Attr2)
Hope this helps!
Kind regards
-
How width measured for the forms and the stroke is converted?
How is the width and the height calculated in the Panel processing for an object? Should I use an average? An example can be seen in the first picture. The lines are not a uniform width.
In addition, how are traits converted from pts to pxls? For example, if I make one related 2.3 pt, when I expand the subject of the width of the transformation Panel will say 2.3px; However, I thought that the point conversion pixel (even for a screen resolution of 72 dpi) was different. An example can be seen in the last two images, where a line was made with a width of line specified and then expanded.
Ah, dasikins.
For an extended object as described and illustrated, I think that you can get a medium width.
Approximate simple, which is near when you have a relatively long object, divide the area (A) of the length (L) the path trajectory and multiply by two (2 * A/L).
For most of the versions (up to CS4 and CS6), you can use the free Patharea filter (which provides you with an area and length available here)
http://www.Telegraphics.com.au/SW/browse/filters
and I think that the latest versions have the information in a range of information.
-
It's weird. I've done several MP4s in Premiere Pro CS6, only 10 min long walk, and the audio goes a bit offset (late), when you play the MP4 rendering. QT, it plays just fine. Is there something needing to be defined in the first or SOUL make any stay in Sync and play well in any player?
Quick backstory: I film DSLR of 1920 x 1080 p at 24 fps (23.97 #) and I capture the audio separately on a portable 24-bit 96 kHz Tascam (which is think is 29.97) and throw it on a Pr Pro CS6 chronology. I use the camera audio bullshit just to synchronize then ALT + click to separate the audio track of the camera and delete it, leaving the sound synced now in place. Then I throw some transitions and effects (especially color grading) on the video, nothing fancy and export one. MP4 first which is activated naturally SOUL. I think the problem is the preset I'm picking. A screenshot of the settings of my SOUL is attached. I use one of the presets for Apple TV/iPad/iPhone which is basically renders the video up to 1280x720p with H.264 compression (no wonder that Quicktime it plays back without problem). I suppose that a codec will come into play here, or simply WMP be stupid? I know what is a codec, but I don't first which one to use (I guess you can), so if that's the answer explain a little when you answer, lol. I am a seasoned photographer and a pretty green video editor (and a lousy video shooting game, lol!).
As a further test, I sent the script to a MP4 again but this time I simply chose H.264 and taken the HD 23.976 1080 p preset that uses different VBR, etc.. As the video plays well in both, but a 10-minute MP4 is close to 2 GB! I was expecting something on the order of 100 to 150 MB so I could YouSendIt out to people and ugly AppleTV/iPhone 4 720 p H.264 preset gives me a size in this range.
Any thoughts on what to pay to get a viable size of < 200 MB with a 720 p video that actually works in WMP like QT? I hope that I ask myself even properly.
Thank you!
What video card you have? AMD? In this case use the MRQ, maximum render quality if you downrez 1080 to 720.
H.264 encoding, but lowering the transmission speed to reduce the file size. Your screenshots show Apple TV to encode at a target speed 2.2 Mbit/s and the other parameter is a target 32 Mbit/s bit rate. AAC audio is also different, 160 against 192.
The file size depends on the duration and flow. Duration is given, so change the bitrate to change the size of the file.
Maybe you are looking for
-
Original title: Windows - month view calendar How to see all the appointment information, that I entered in the display "months"? It shows only the first two words entered.
-
I have two websites and a cluster CPU as below: site - 1 CUCM pub-1 Pub 1 CUC imppub exp-c-1 exp-e-1 site-2 cucm2 CuC2 IMP2 exp-c-2 exp-e-2 ! I do a bunch of highway E and C, but it I show error on cluster of highway E: Failure - there are network co
-
Api SOA to approve/reject a request
Hi team,How can I approve/reject requests using the Api of SOA. Currently I am able to get the approval using Weblogic tasks. Please guide me on how to take necessary action(Approve/Reject) request.Thank you.
-
do I have to buy an external hard drive to transfer my library to another computer?
Do I have to buy an external hard drive to transfer my library to another computer? There is another technology that is cheaper?
-
How well Indesign works on a VPN connection?
We're a small publisher widely distributed using Adobe Indesign, Incopy etc. We want access to our server for designers from outside and focus on a VPN solution. We have set up a VPN test, and it seems to work OK for access to files, however the load