Often quick book hangs for a very long time, when it is updated transactions in SQL Server

Similar Questions

• My iPhone 6 won't charge for a very long time

  I, I noticed that my iPhone 6 won't stay not charged. It uses the battery charge more that there never. The phone went through a full reload during the night. Anyone know what could be causing this and what I can do to fix this?  Where can I go if I have a new battery, due to the fact that I am not near a store Apple. My phone is yepars only two old.

  I think that the visit of the Apple Store is the best option. Specialists Apple will surely help you.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  Here you will find some useful tips on how to make the life of your device's battery more long. They work for 8 and 9 IOS iOS.

  http://www.IMore.com/battery-life-problems-iOS-9-heres-fix

  https://www.Apple.com/batteries/maximizing-performance/

  sues-iPhone-iPad-and-iPod-422229 http://www.idigitaltimes.com/iOS-82-Battery-Life-Problems-How-Fix-Quick-drain-is

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Malicious software removal tool update problems the last few months. Suspended for a very long time. Vista Home Premium 32 bit SP2

  Hello

  The last 3 months when the download and installation of my updates for Windows Vista, it gets stuck for hours on the malicious software removal tool. I have to cancel it. Restart the computer and reinstall. Then he moved very well and quickly according to historical updates. Last month, it was really difficult to cancell it well. He finally got through it. Here is a little history on my machine. I'm very very well with this computer. Each week, I do disk Cleanup, then defrag with diskeeper, virus scan with Microsoft Security Essentials. And every six months, I run a very large disk check and I said to correct errors and try to fix bad sectors. More than 3 years, I only had 2 minor bluescreens. I always make sure I have all my products Microsoft put updated. When I first got this computer I had a guy I.T. (a neighbor) out of the box and clean all the useless garbage out of it and it partitioned the hard drive. More than 3 years, he managed as a champion. Always very fast and all.

  I hope that I'm not the only person having problems with this. Just start with the month of June, then July, then August.

  P.S. I have 2 laptops running XP sp3, one is 9 years old and the other is 11 years old, he had 2000 top PRO, but I just put XP sp3 on it last month. They run too much like fields. I take good care of my computers with a little help from my friend IT. They have the same programs as this one and I do the same things to them, but they do not have this same problem with the release of the MSRT tool. Which leads me to think that it is specific to Vista only, I have a Windows 7 computer yet, so I can't speak for seven.

  Any suggestions or ideas? We are scratching our heads on this one.

  Thank you in advance for your time and help

  Tim Kerr

  Your misguided use of registry cleaners could have caused this behavior! If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~

  Your use of Revo Uninstaller and the foregoing notwithstanding, applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open IE (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. the or shortly after seven 14-10 when the next MRT is scheduled to be released).

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't update ipad. It only shows check updated very very long time. No change.

  I can't update ipad. It only shows check updated very very long time. No change.

  Show this message where? Put you up to date on WiFi? If you are, try to update with iTunes. If you don't have a computer and are based on the WiFi only, try this.

  Settings > airplane Mode > on. Who will sign you out of WiFi. Now, do a forced restart. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

  Return to settings > airplane Mode > Off. That will reconnect to the WiFi. Try to update again.

  If this does not help, pwer cycle of your router. Unplug it from power for 30 seconds, plug back in and then try to update again.

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• I get BSOD on my computer, I am able to work normally for quite a long time.

  Original title: BSOD help

  Hello

  I have a BSOD. I am able to work normally for quite a long time. Then suddenly out of nowhere it will just be BSOD. I need your help.

  Link to the dump and system information files: http://1drv.ms/1VgeiHE

  Your help is very appreciated :-).

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Media Center which hangs for minutes at a time

  I have Windows 7 Pro HAV. everything seems to work fine except Windows Media Center which hangs for minutes at a time

  Hello Bruce,.

  Thanks for the reply.

  I appreciate your patience.

  Please refer to the suggestions of Thane replied on February 2, 2010 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Media-Center-freeze/9b4147cf-A379-4534-aee7-01335e3729f9

  Please also make sure that the necessary codecs are installed.

  Reference:
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-7

  Note: Use caution when installing codecs that you find on the Internet, in particular some of the free codec packs that claim to include codecs from a wide variety of companies or organizations. Incompatibilities are known to exist with some of the components in these codec packs that can cause serious playback issues in the player and other players, lead to the corruption of the system and make it difficult for Support from Microsoft to diagnose and solve playback problems. For these reasons, we strongly discourage you from installing these codec packs, and recommend that remove you them if you have installed them and you are having problems with the player. Install only codecs, filters or plug-ins from reliable sources, authorized, such as the website of the official supplier. Even in this case, beware: some codec suppliers offer minimal customer. Before you install the components of digital media, set a system restore point. The restore point to go back to the configuration of your system, if necessary.

  Please keep us updated.

  Thank you

• Loading very very long time

  Good day to all,

  If anyone has had a situation where there is a load very long time. I play by an LMS content and it will not load or just continually trying to load forever. I wonder if there are any settings within Captivate that this would cause?

  

  We use IE7, Java JRE Version 1,6,0,39, Flash 8, 800, 94 v11, v12, 1, 2, 152 Shockwave

  Thank you very much

  REv

  And how much megabytes is your published content?  You have not said that, but it is usually the most important factor.  Also check if your preloader is set to 100% as it is the default setting in Captivate, but can be significantly reduced in order to improve the performance of loading time.

• dynamic table takes very long time to compile

  Hello

  in a small program, I need to create a wide range:

  FIXED-SIZE ARRAY:
  [27] Char hash [26] [999] [99] [16];

  But not in all cases, the last item in the hash table has a value (string
  15 bytes), so I want to create a dynamic array to save memory.

  TABLE SIZE DYNAMICS:
  char * hashtable [27] [26] [999] [99];
  .......
  If (strlen (hash_string)) hashtable [a] [b] [c] [d] = malloc (sizeof (char) *)
  (strlen (hash_string) + 1)) ;

  .......

  In debug mode:

  If I compile the program with the array of fixed size, all working properly and
  the program runs immediately

  If I compile the same program with the table dynamically (and using malloc)
  It really takes time to compile. It seems that the program freezes,
  But if I wait quite a long time (several minutes), the program runs

  I am using CVI 2009

  Any ideas why it takes so long if I use dynamic memory?

  Thanks in advance,

  Norbert Rieper
  Bremerhaven

  When CVI compiles the file in a configuration of debugging with debugging level value Standard or extended, then we allocate data protection user to track the State of each pointer in the table. For each of the pointer values 69 million that we allocate data to add to your executable file to control execution. These allowances are initially the apparent blow.

  There are several ways to prevent CVI to distribute all of these additional data.

  (1) change the level of debugging "no run-time checking.

  (2) change the base type of the array of ' char *' to 'size_t '. You must also add a cast to all the references to the elements of the array.

  (3) select it's Enable. Obj option' option for the file that contains the definition of the table. This turns off debugging for this .c file.

  3 (b) move the declaration of the array to its own .c file and the option "Enable.obj" what .c file instead of the .c file that contains all the source data that uses the table.

  Although you need only 70 MB for dynamically allocated strings, you must always 265 MB to store the array of pointers to 69 million.

  -Michael

• Silent mode - for a period of time only. After update to Android 6.0

  Hello

  Cannot know how to silently for a more predefined period of time. Marshmallows before we had the choice to put this silent mode should just modified for the next 30 minutes, two hours etc. It is a very nice feature for me, because too often I forgot to turn on sounds after a meeting.

  Before this feature came in the Android, I used an app that defined silent mode with a timer. Do I have to re - install an application like that?

  I found where you can set (by chance) all trying to solve my problem.

  If you access do not disturb in the menu drop-down (if it is not there then it is one of the icons you add to the grid) when you select the option it offers the possibility of no end or for a period of time time.

  I am happy I found it too since I also use it when I go to meetings.

• takes a long time when installing m1212nf mfp on my win xp pro printer driver

  am installing m 1212nf mfp printer using the usb port but its taking time when you have to connect the usb cable after the connection of the step, it gives you the new device is connected now

  Hello

  Because the printer is device plug-and-play USB this problem may occur if the printer cable is not properly connected or the USB cable is not compatible.

  Please follow the methods and check if it works very well.

  Method 1:

  Run the Microsoft fixit for the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest also refer to the operating manual of the printer for the correct installation instructions.

  Method 2:

  Follow the steps in the link.

  "Device setup has not completed" or the "Unknown device" Message appears in Windows during Installation of USB

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02124639&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3965849

   

  Method 3:

  Please download and install the driver manually from the Web site and check if it works very well.

  Check out the link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3965849#n198

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• y at - it that results in a fix for kb2582282 calculate wrong time of the next run of the SQL Scheduler

  After the installation of KB2582282, all timed SSRS 2008 subscription get the next bad performance calculated by the Scheduler SQL 2008.  Is there any solution for this?  I am running SSRS 2008 x 64 and SQL 2008 x 64 sp1.  NO R2.  After uninstalling the hotfix rollup16 for SQL, Scheduler calculates the next run correctly times again.

  Hello

  As the question you posted is related to Microsoft servers, I suggest you to ask your question to

  Microsoft MSDN

  SQL Server Reporting Services

  http://social.msdn.Microsoft.com/forums/en-AU/sqlreportingservices/threads

• shorthand for a very long sentence in windows please

  I used to know how to use a shortcut phrase that might make it appear a long phrase commonly used (for example)... similar to the iphone shortcuts under ' General settings where you type a2-letter sortcut, press "enter" and then shows the previously typed long desired commonly used expression.

  Can anyone help please?

  Concerning

  Rex - Pix

  I used to know how to use a shortcut phrase that might make it appear a long phrase commonly used (for example)... similar to the iphone shortcuts under ' General settings where you type a2-letter sortcut, press "enter" and then shows the previously typed long desired commonly used expression.

  Can anyone help please?

  It would greatly depend on the application you're using.  The reasoning is simple: just as with the iPhone (or an Android device) - you cannot have the same shortcuts in all applications it can mean something totally different (not just by words, but may lead to a different action in one application over another.)
   
  What you're talking about, in Microsoft Office in any case, would be the AutoCorrect feature.  (Example of this in the wild: http://www.reddit.com/r/LifeProTips/comments/1k73jl/lpt_use_the_autocorrect_feature_in_microsoft_word/)
   
  I'm not sure if you can change the dictionary to spell IE10 utility (just haven't looked):
  http://www.SevenForums.com/tutorials/264311-Internet-Explorer-10-IE10-spelling-correction-enable-disable.html
  ... but please, try it and tell us if you wish!
   
  Firefox has something similar:
  http://support.Mozilla.org/en-us/KB/how-do-i-use-Firefox-spell-checker

• How to combine digital photos in CS6 for a very long exposure

  Hi all

  I want to make a really long exposure using my Canon 40 d DSLR.  If I just put the camera to bulb and take a long exposure, I get a lot of noise which eventually destroys the image.  I understand that you can get the equivalent of a long exposure by combining several shorter exposures (many?) of the same scene.  This is commonly done in astrophotography and other areas, but I don't know how to do it.  I tried Googling some of the terms, but I guess that I did not use the terminology just because the search did not turn up until I wanted to.

  Is it possible in Photoshop, or do I need another tool to achieve this?

  I use CS6 on a Mac Mini with os x 10.8.4.

  Thanks in advance for any help.

  Kevin H.

  Image stacks you can add frames or their average.

  Dark frame subtraction would reduce the dark News (especially glimmer of amplifier on long and dark exposures).

• Strange behavior of "RT Get CPU Loads.vi"; first call lasts a very long time!

  I spent a considerable time of debugging a new application, after that we decided to migrate to the new architecture. When a more common coding errors where eliminated, the application started running smoothly for short periods before suddenly freezing until the moment where the connection to the target RT has been lost.

  I finally understood as a Subvi, which returns the data to the system (use of memory, the cpu load, etc.) lasted if long run than the queue to feed this consumer loop filled with tasks causing eventually the memory fills. I have done some testing of the Subvi separately and noticed that "CPU Get RT Loads.vi" takes forever to run the first time, it is called after a target restart and then quickly runs during subsequent calls.

  Is this known behaviour? Other ways to solve this, except 'RT Get CPU Loads.vi' call during initialization?

  The VI has an entry "session in? If she uses the system of screw configuration, he may have to create a session on the first call you can do outside of your loop. If not and you have installed system configuration tool, you can try to use the nodes property to get the CPU - in more recent versions of RT, I think that the function you are using is obsolete.

  Can you post a snippet of your code / the VI?