Silent mode - for a period of time only. After update to Android 6.0

Similar Questions

• U2415, artifacts monitor after power off for a period of time. Solved by allowing the DP1.2

  U2415 - artifacts monitor after power off for a period of time

  I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.

  It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.

  I will need to restart the PC for it to be back to normal.

  It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.

  Any ideas? Thank you.

  I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.

  [See:www.dropbox.com/.../U2415.mp4]

  Hi Chris, just an update.

  A local forumer had discovered how to solve.

  It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.

  Hopefully someone will find this useful.

  Thanks Chris.

• Up to version 7.01 FF ever hanged, but with 7.01, after having not used for a period of time (hours or less), it crashes. No solution except again?

  Up to version 7.0.1 but never crushed/hnag, FF with 7.0.1 after you have not used for a period of time (hours or less), it crashes. No solution except again?

  Upgrade your browser Firefox 8 and try

  • getfirefox.com

• How to run a framework for a flat structure of sequence for a period of time?

  Hello

  I have a loop timed measuring a resistance value every 2 seconds. I wish I had this loop timed to run for a period of time (5 minutes). The timed loop itself is placed within a flat sequence so I fear that the measure will be taken once and the next picture will begin to run, without wait 2 seconds for a successive reading (and not a loop for, say, 5 minutes).

  In other words, is it possible to have a flat sequence structure frame run for awhile before moving on to the next image?

  Thanks for your help!

  JFK_Aero

  All code within a sequence must complete before can execute the following image.  So until your timed loop is configured correctly, the following image may not run until your 5 minutes is up (N = 5 minutes / 2 s/measure = 150 steps).

• I bought the plan for photography and still pay each month. but I can't use photoshop only after update. and they need to join a plan. How can I do? I can only use for the trial version even I never tell months.

  I bought the plan for photography 6 months ago and still pay every month.

  but I can't use photoshop only after update. and they need to join a plan.

  How can I do?

  I can only use for the same test version that I pay every month.

  Hi yejik42305752,

  Please see the following article: https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  Kind regards

  Tanuj

• mouse/key locks board increase after computer idle for long periods of time. any Advisor

  I'm having a problem with windows lock-up during idle time.  If I leave the computer for a period extended by time, most often but not always my computer crashes. In other words when I get back, my mouse or my keyboard doesn't work at all. If I left open with unsaved information programs, I lose this info because as my only alternative to get operational again is to shut down the computer manually. Can anyone provide me a help or possible solutions in order to avoid gels of this nature?

  Thank you for your help.

  This is possibly due to a slow computer errors and registry. I recommend the following.
  CCleaner - will remove the unnecessary files that you don't want

  Step 1. Download Ccleaner from http://www.piriform.com/ccleaner/download/standard
  Download it, run the file install Ccleaner, then open Ccleaner.
   
  Step 2. Click run cleaner once you have checked all you don't want on your computer. This will clean up unnecessary files, you don't want to. CCleaner also comes with a registry cleaner.

  Step 3. To run this registry click on the left side of the window, and then click scan for issues, difficulty of the selected questions, click on no to the box that opens, and then click fix all selected issues. This should clean all files that is no longer usable.

  Defragment your drive hard by: Windows Defragmenter to help. I use defraggler from the makers of Ccleaner because it defragments the individual files.

  If problems or questions please answer.
  Answer if you want to know how to install defraggler too!

• Is it possible to implement a silent mode for working days and weekends please

  Dear Development Department

  It would be so useful that you could implement a silent mode (the Moon) you can preset for the day's work (example 7:00 - 23:00) and weekends (example 10:00 - 0:00). Instead of the defined once available in the current ios.

  Thank you

  Nathalie Rijnvos

  Hi Nathalie

  You can submit your feature request to Apple here:

  https://www.Apple.com/feedback/iPhone.html

  (You do not speak to Apple here - it is a community based on the user).

• Equium - how to set silent mode for CD player?

  Hi, I have Toshiba laptop Equium series and recently I had to reinstall my Windows Vista.

  And now my CD is very noisy when read data CD and the whole notebook trembles.
  I remember that when I have both that there was some option to put it in quite mode.

  I download a firmware from this site, but there for another CD.
  So I'll be very grateful if someone told me how to make completely new.

  The CD-ROM is MAST * a DVD-RAM UJ-850 s

  Hello!

  I put t know what laptop you have, but you can download on the European site of Toshiba acoustic silencer.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  On my Satellite L300, I use the acoustic silencer, and I like it. If I watch a DVD or listen to music from the CD, I put the silent mode.

  Good bye

• Storage/not using the printer for a period of time extended

  I have a Photosmart 6520 printer which is not used for a period of 6 months each year.

  The last time, I removed the cartridges and stored in an airtight container. When the reactivation of the printer, it has no print at all, but after many attempts to clean and/or align the print heads, he is slowly back to normal operation.

  My question is: what is the best ink cartridges must be left in the printer or deleted during this period?

  It is best to leave them in the printer. Once these special cartridges have their orange shipcap removed, I always recommend to leave in the printer, if you go to the store for a while.

• Installation in silent mode for CS5.5?

  I was able to get a silent installation for the DPS tools work very well for CS6 (v27), but I did find a method effective for CS5.5 (v27), set apart from the use of JAMF to perform monitoring of file system.

  The commands I tried:

  sudo /Adobe/DPS/r27/cs5.5fp/Install.app/Contents/MacOS/Install--mode = Silent

  Starting the installer...

  In silent mode.

  Successful installation.

  Leave the installer with the Code: 0

  &

  sudo /Adobe/DPS/r27/cs5.5fb/Install.app/Contents/MacOS/Install--mode = Silent

  Starting the installer...

  In silent mode.

  Successful installation.

  Leave the installer with the Code: 0

  They always communicate that they are running properly, but do not actually seem to install anything. If I remove the silent flag, the Setup program runs successfully, but with the intervention of the user, which is not desirable. If anyone has encountered a similar issue or have a good way around it?

  Even if I have already provided the private solution I post here as well in case other users are facing the same problem.

  The correct syntax for silent deployment is:

  sudo. / Install - mode = silent - DeploymentFiles = "path".

  Thus, for example:

  sudo./Install.app/Contents/MacOS/Install--mode silent =--deploymentFile=deploy/AdobeDigitalPublishing-mul.install.xml

  (here, the assumption is that the user is in the directory where is Install.app.

  The command line, you should see "successful Installation. Leave the installer with the code: 0.

• After the server running for a period of time, get connection errors

  Hi all
  
  We meet a few serious problems during the performance tests.
  Its does not occur with WebLogic 10.3 and does not occur with connections of type oracle.jdbc.driver.OracleConnection.
  
  After the test, the server fills up with the following exceptions...
  
  < 9 October 2009 15:34:17 IST > < WARNING > < JDBC > < BEA-001129 > < receipt exception creating connection to pool ' jdbc/sdoPool': IO exception: the network adapter could not establish the connection >
  
  
  Here is the configuration of the jdbc/sdoPool:
  Driver class name: oracle.jdbc.OracleDriver
  -> Properties
  user = SOL_ISMART_USER
  Class = Oracle.JDBC.pool.OracleConnectionCacheImpl
  Protocol = thin
  Initial capacity: 1
  Maximum capacity: 100
  Capacity: 1
  Delete the infected connections
  
  
  
  Code to get the connection...
  DataSource data source = null;
  
  VR;
  {
  dataSource = (DataSource) ctxt.lookup ("java: comp/env/jdbc /"+ poolName ");
  }
  catch (NamingException only)
  {
  dataSource = (DataSource) ctxt.lookup (poolName);
  }
  
  Connection Conn = dataSource.getConnection ();
  
  OracleConnection vendorConn = (OracleConnection) ((WLConnection) conn) .getVendorConnection ();
  
  vendorConn.setClientData ("LOGICAL_CONNECTION", conn);
  
  Return vendorConn;
  
  
  Here is my code to close the connection...
  If (con instanceof OracleConnection)
  {
  If (((OracleConnection) con), .getClientData (C_LOGICAL_CONNECTION)! = null)
  {
  Connection logicalCon = (connection) (con (OracleConnection)) .getClientData (C_LOGICAL_CONNECTION);
  
  connection - defense against leaks of output connection
  (Con (OracleConnection)) .setClientData (C_LOGICAL_CONNECTION, new Object();)
  
  logicalCon.close ();
  logicalCon = null;
  
  con = null;
  }
  on the other
  {
  con = null;
  }
  }
  on the other
  {
  If (! con.isClosed ())
  {
  con. Close;
  }
  }
  
  
  
  Any advice / help greatly appreciated.
  
  Ronan

  The DBMS does not give new WebLogic connections when running. Try to set
  the initial capacity of the pool to 35 and the login delay to 1, so the pool
  makes 35 connections at startup, one at a time, with a delay of 1 second
  between each of them. (The DBMS can sometimes get overloaded if it becomes too
  connection requests in a short period of time and don't miss some people).

• In input/out live telephone calls have "broken" sound only after updating to iOS 9.3 update on 6, please help...

  All entry/out live telephone calls have 'broken' sound only & unable to play the music on my phone after update to iOS 9.3 update on 6, please help...

  Hi there dmaclatchy,

  It sounds slipped you can not use the app phone on your phone, because the sound is uneven or inaudible and something is happening with your music do not let play. I want to quit all applications running on the phone:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  
  If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Let us know how it goes! Thank you for using communities of Apple Support.

• Pavilion dv6: 10 for Windows upgrade fails Pavilion dv6 after update and entry of password

  After updating my Pavilion dv6 Windows 7 64 - bit of Windows 10 64 - bits, the connection to the computer to update resulted in a machine stuck with white (gray) screen. The upgrade seems complete without any problems. It is only after a reboot with the machine being upgraded and after entering the password that the lock status was encountered.

  You can see if any of the suggestions in the linked thread works - but DV6 succeed well in Win10, and if none of these work, you need to consider restoring to Win7: HP Notebook PC - computer starts but the screen remains empty (10, 8 Windows) | HP® customer support

  I have a DV6 and after many hardships, restored to Win7 because I felt that an older OS where everything worked was much higher than a more recent OS where many things were "broken."

  And there is no driver HP Win10 for the DV6.

• the iPhone screen is not responding and only works for short periods of time when I use siri for an indefinite period.

  Then my phone 3 days ago started having a screen is unresponsive. I just found someone else who has the same problems as me. My screen is white and gray, flickering vertical lines at the top of my screen, sometimes extending to the bottom of the screen. My iPhone 6 s more screen shows only these lines when I use Siri for what it is, which is a little strange. To make things even more bizarre my screen becomes sensitive occasionally, but only when I'm talking about Siri for an indefinite period. One of the things I had in common with a question that someone asked who had similar problems that me was that, when these lines flickering, vertical, white and gray, the iPhone will eventually type things randomly on its own. Such as random apps or opening of the things randomly without my intervention. A unfortunate thing is that when this happens it selects things like that to end a call or facetime. I already know that the cost is $329 remedy since its considered as "other" in the apple repair options and I am also out of warranty, so I wanted to know if there is any other explanation for this. It made my phone very difficult to use these days now...

  Im going to guess that your phone is actually a 6 + and not a s 6 +, which means that your phone is suffering from simple plu epidemic of iPhones of all time - to the epidemic ic touch.  It is unrelated to Siri and tricks of the 'home', the lack of contact button that gets worse with time and flashing bars gray is the presentation of the default signature.  It's a failure level Council of integrated circuit chips that control touch and it is a design flaw in the jury of 6 + that Apple does not recognize.  You can send for microsoldering of the Board of Directors to resolve the underlying anomaly for half of the cost of your options at Apple--assuming that you are not interested in protecting your out of warranty at Apple options.

• After the upgrade to Firefox 9 browser frequently hangs for a minute or two, becomes white and says (not answer). Updated in ff10-yet it - only for long periods of time.

  I'm on Win7, I tried to delete the places.sql that has been suggested here - it doesn't have to be in this version of ff, because I can't find it and YES, it still happens in safe mode.

  Never mind. Still cannot find places.sq, but just for the heck of it, I was looking at solutions crash here, even if it is not a case of shock and decided to try a new profile. So far, seems to work ok. If this isn't the case, I'll be back with another answer!