OIM11gR1 - increase in size of the IOM standard attributes?
Hi allI use the following IOM standard attribute:
USR_MOBILE VARCHAR2 (20 CHAR)
I would like to increase its size (resizing) at 40.
I doesn't seem like the IOM supports resizing of the attributes.
Should I bother to try to change that? or it will be easier to create a new USR_UDF_MOBILE with the size I need?
Thank you
ADR
ALTER table usr change usr_mobile varchar2 (40);
ALTER table recon_user_oldstate change usr_mobile varchar2 (40);
I don't think that there is something in the file /file/User.xml in the MDS repository, but you may need to check it so and import your updates.
If you have any recon items approved, you must update the RA_ table so that maps the values that him.
-Kevin
Tags: Fusion Middleware
Similar Questions
-
Big increase in size of the backups after upgrade
Hello
I updated my database of 10.2.0.4 on win2003 SP2 for 11.2.0.1.0 SE SE on win2008 R2 SP1 64 - bit, by making exp/imp
The amounts of size databasefiles up to approximately 150 GB on each server
But when I do a normal RMAN backup of the data files to the new database (database backup device type disk); I get a backupset that is 78 GB in size.
On the old database, the backup size was only 36 GB
Two data are substantially the same, and I don't think I'm using the compression on any one of the database backups. I listed the RMAN settings below
Can someone tell me why I see this huge increase in size of the backups?
Best regards
Klaus Mogensen
10 GB RMAN settings:
CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK BACKUP FOR PARALLELISM BACKUPSET TABLET 1 TYPE;
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE the FORMAT of DISC TYPE CHANNEL DEVICE "C:\backup\vtrack\backupset\ora_df_%Y_%M_%D_%T_%t_s%s_s%p.bkp";
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SNCFVTRACK. ORA'; # by default
11g RMAN settings:
CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' E:\ORACLE\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFVTRACK. ORA'; # by default
That is why,
Configuring your channel 10g device:
SET UP THE DEVICE TYPE DISK BACKUP FOR PARALLELISM BACKUPSET TABLET 1 TYPE
Configuring your channel 11g device:
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
The 11g, 10g being compressed backups are not.
-
Increase in the size of the column standard Table UCM?
Hello
It is preferable to increase the size of the column in the columns dOldValue and dNewvalue in table RecordsAuditMetadata of the Complutense University of MADRID.
I am followed by a digital signature event in this area and since it is a Memo field with more than 100 characters is getting truncated.
Is there another solution better?
Concerning
If I were you, and if you can do this, I create a SR in Metalink and ask an official response. Support can tell you what to do.
-
Office has increased in size and the print size is almost double.
Original title: Hi, my office decided to increase in size - how to decrease (printing is almost double than it should be). Thank you.
Printing has suddenly increased - how I reduce to normal size please? Thank you.
Hi GlenisRhodes,
1. What is the brand and model of the printer?
2. This occurs when you try to print from a specific program?
3. when the problem started?
4. did you of recent changes to the computer?
You can try to change the resolution of the screen and check.
You can also try to print a test page and check.
Hope this information is useful.
-
Publish with the increase in size of the readers
Hi all
I have a seemingly common problem, but unfortunately common solutions do not seem to apply. I have a VM that I migrated to ESXi 4 5.1 a year ago and have used without problem. Recently, it has become necessary to increase the size of main drive of the 60 GB original but the size options are grayed out. I checked and it is y no snapshot files or y at - it hard < 0000 files > in the directory of the virtual machine in the data store. I even created a new snapshot, then used the "clear all" button to make sure that all of the snapshots are gone, but the size options are still grayed out. I tried the upgrade virtual hardware then in the VM properties, I see that the version is vmx-09 that I understand is the latest version. The disk is a thick accrued lazy set to zero that I thought that maybe part of the problem, so I added a new thin provisioned disk and I can't increase the size of this one either. It seems to be limited to this virtual machine, but as I have other VM is present on this server I can increase the size of the disk without any problem even if I have not updated the virtual hardware for those so that they are always to version 7 (I don't know if this matters).
So I'm quite positive, there is no snapshot or snapshot files, I updated the latest material available, and I'm sure that the type of disc is not serious because it seems to apply to thin provisioned and drop discs thick. I'm out of ideas. Any help would be appreciated!
Kind regards
Tim
Hi Tim,.
Have you tried to add additional SCSI disk (which adds the controller and drivers needed). Do a clean reboot then switch your IDE to SCSI and if successful (after other clean reboot) remove the new drive that you have added. By doing this, you are making sure the drivers for the controller are installed before switching types.
See you soon,.
Jon
-
Photos - increase in size of the Image in the surface Gallery
The small image tiles are too small for me to see when I'm trying to select among them for various purposes. I would just like to have pictures of tile less, but BIGGER. Were not able to understand this through settings. Please advise? Thank you.
You are looking inside your photo folder? If so, click on the view tab at the top, then click on 'BIG PICTURES' as the size of the thumbnails.
Tip: If you have a scroll of the mouse wheel or a touch pad that can be scrolled up and down, you can use it to get even more great. Simply simplement cliquer click on an icon, then hold down the Ctrl key while you scroll upwards.
-
Media Vault - increase in size of the hard drive
I have a Media Vault with two 500 GB hard drives. Is it possible to increase the size of hard drive beyond 500 each?
Bob
I managed to install two 750 gig drives in my Media Vault 2020 in a Raid 1 mirror. To do this, you need to reinstall the operating system on hard drive #1. I used the instructions provided by Lee Devlin at http://www.k0lee.com/hpmediavault/. Tip: Before using Nasload to reload operating systm, turn off the firewall in use.
-
increase in size of the C drive after installing windows 8 pro, why?
my C drive partition volume is 92 Go, he had a lot of space before moving on to windows 8 from windows 7, after installation, I've seen the size of my c drive has only 5.33 GB free, why has happened?
Thank you
I did it but the problem did not solve.my of free disk space is 2.24 GB, it's very weak. I have a question, I saw my C drive, I saw a folder named windows.old, what is? its volume is almost 18 GB. can I remove it?
Another problem I have are not wanter to add some more space to drive to another partition, I cut 50 GB of drive D and built a new primary partition but I can't merge the C drive, what should I do to add a disk space? (I used the computer management/disk management and also Acronis disk Director)Windows.Old stores your old Windows installation. You can use it to recover files or reinstall the previous version of Windows. If all your data has been migrated to Windows 8 safely, you can remove:
http://Windows.Microsoft.com/en-us/Windows-8/how-remove-Windows-old-folder
This should give you more space.
If you want to gain extra space, you need to use a third party tool like Easeus
Download Easeus at the following link
EASEUS Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html
------------------------
Proceed with the installation of Easeus:
Click Next, follow the easy on-screen instructions.
Once the installation is finished, click on finish
Click go to the main screen
Select the drive you want to resize in partition window
Drag the button until you have an amount of disk space you need, then release desired.
Click on apply to apply the changes that you just made.
Click Yes
Click Yes
Your computer will restart several times and changes will be made to the layout of the partition, this process is hands-free, so no interaction is required.
-
Can merge increase in size of the index?
Hello
I'm trying to understand how changes in the use of space after coalesce an index.
I use Tom Kyte show_space procedure.
DB is 9.2.0.8.
Look like only two values changed:before Coalesce: Unformatted Blocks ..................... 0 FS1 Blocks (0-25) ..................... 0 FS2 Blocks (25-50) ..................... 1,811 FS3 Blocks (50-75) ..................... 0 FS4 Blocks (75-100)..................... 0 Full Blocks ..................... 2,969 Total Blocks............................ 4,864 Total Bytes............................. 39,845,888 Total MBytes............................ 38 Unused Blocks........................... 0 Unused Bytes............................ 0 Last Used Ext FileId.................... 149 Last Used Ext BlockId................... 2,979,081 Last Used Block......................... 128 After Coalesce Unformatted Blocks ..................... 0 FS1 Blocks (0-25) ..................... 0 FS2 Blocks (25-50) ..................... 4,142 FS3 Blocks (50-75) ..................... 0 FS4 Blocks (75-100)..................... 0 Full Blocks ..................... 638 Total Blocks............................ 4,864 Total Bytes............................. 39,845,888 Total MBytes............................ 38 Unused Blocks........................... 0 Unused Bytes............................ 0 Last Used Ext FileId.................... 149 Last Used Ext BlockId................... 2,979,081 Last Used Block......................... 128
before:
FS2 Blocks (25-50)... 1 811
After:
FS2 Blocks (25-50)... 4 142
front
Complete blocks... 2 969
After:
Complete blocks... 638
So, we've got several blocks 25-50% free space
and less complete blocks.
And it's strange, how we can have less complete blocks after merger?
Second question is there a reason my index may grow after the merger, when that would happen?
Please explain :).
Concerning
GregGYou can also read http://richardfoote.wordpress.com/2008/02/08/index-rebuild-vs-coalesce-vs-shrink-space-pigs-3-different-ones/
Concerning
Karan -
Increase the size of the directory tmp on host
Hi people,
I'm running into a little trouble when you try to install an application on a host computer, where in I need the /tmp/ directory is higher than what it is configured.
Y at - there anyway how I can change the value. ? or increase the size. ?
Thank you
AvinashHi people,
I discovered that it cannot be changed or increased since its hard coded and seems that VMware is working on feature request increase in size for the temp space because there are moments where the BAND dump is partial because of similar space issues.
Thank you
Avinash -
Measure vs. increase the size of the - not sure of the difference
I have a question about action vs increase the size of a data store. I don't know if they are one and the same.
If I have a 200 GB LUN presented to me and I have a 200 GB data store. We realize that we actually need is 400GB. In our case, the SAN administrator pushes the LUN and so we can increase the size of the data store. What is a measure? I'm not add two LUNS together to make more size.
The alternative is of course to create a NEW LUN of 400 GB and the storage vmotion on him, but if the above is not dangerous or going to steal the performance that we would prefer that.
Any thoughts?
ftfcu wrote:
I have a question about action vs increase the size of a data store. I don't know if they are one and the same.
If I have a 200 GB LUN presented to me and I have a 200 GB data store. We realize that we actually need is 400GB. In our case, the SAN administrator pushes the LUN and so we can increase the size of the data store. What is a measure? I'm not add two LUNS together to make more size.
The alternative is of course to create a NEW LUN of 400 GB and the storage vmotion on him, but if the above is not dangerous or going to steal the performance that we would prefer that.
Any thoughts?
to what extent could be covering the different LUN data store.
increase in size of the data store would actually expand IF you have available space on the lun or on your storage space has developed firstly
If he pushes the san admin, it is not a measure.
SVMotion to a larger data store is fine too.
http://sparrowangelstechnology.blogspot.com/2012/07/growing-and-expanding-VMFS.html
Here you can see that the virtual machine is not affected by increasing the data store
-
Increase or decrease of the Html font size?
Hello people,
I am trying to write some html tags under the source region in the region. I am trying to get everything correctly wait the size under the policy tag.
I'm using something like that: -.
----
< font size = "7" face = "Arial" > < b > This is sample < /b > < / make >
---
I am able to use different faces, etc. of the attributes of the tag are color, but I'm not able to see that anything changes with the size under the tag make attribute.
Any help
Thank you
Kind regards
KumarThe tag are outdated for several years. Try
Hello World Hello World
Tyler
-
Set the size of the cache does not work (to the great usefulness of RAM)
Hello
I posted this question in another forum, but they told me it would be better to aks that here:
I m read in a csv table and put in a primary database (DB_QUEUE)
and several secondary databases (DB_BTREE). I m using the Berkeley DB 4.7
for with C++. For the primary database, I let the standart for the secondary cache size
databases that I want to use 16 MB:
unsigned long cache_byte = (1024 * 1024 * 16);
s [a]-> set_cachesize(0,cache_byte,1)
dry [*] are the secondary databases
and the size of the cache is set before you open databases.
The problem is when I run the program it allocates more memory.
but it should just use a little bit more than once 16 MB.
Can someone help me?You can open all databases in a unique environment, with just a cache? Happens usually better, because Berkeley DB can share the cache based on access patterns.
That said, an increase in size of the memory can be caused by a leak of any where in the application - it may have nothing to do with the cache of Berkeley DB. Have all of the tools that could help track where the memory is allocated? If you're on Linux, valgrind (http://valgrind.org) is great for this sort of thing.
Kind regards
Michael Cahill, Oracle Berkeley DB. -
How to increase the size of the file
My application creates .amr files of 0 KB after completing the recording of the voice. How can I increase the size of the file.
I think I am, but I write my code if you could help me.
- This is in fact the problem is that it is not written in my .amr file if it is their creation
whenever I call someone.
- Furthermore it is also telling me that 'myappname' trying to record media.
So confirmation registration takes place
However why write records into mu .amr files intrigues me
Thanks in advance
import java.io.ByteArrayOutputStream; import java.io.IOException; import java.io.OutputStream; import javax.microedition.io.Connector; import javax.microedition.io.file.FileConnection; import javax.microedition.media.Manager; import javax.microedition.media.Player; import javax.microedition.media.control.RecordControl; import net.rim.blackberry.api.phone.Phone; import net.rim.blackberry.api.phone.PhoneCall; import net.rim.blackberry.api.phone.PhoneListener; import net.rim.blackberry.api.phone.phonegui.PhoneScreen; import net.rim.blackberry.api.phone.phonegui.ScreenModel; import net.rim.device.api.i18n.Locale; import net.rim.device.api.ui.component.Menu; import net.rim.device.api.ui.container.MainScreen; /** * A class extending the MainScreen class, which provides default standard * behavior for BlackBerry GUI applications. */ public final class RecordScreen extends MainScreen { Player player; RecordControl recorder; private ByteArrayOutputStream output; byte[] data; boolean yes = false; int st; /** * Creates a new RecordScreen object */ public RecordScreen() { Phone.addPhoneListener(new PhoneListener() { public void conferenceCallDisconnected(int callId) { // TODO Auto-generated method stub } public void callWaiting(int callid) { // TODO Auto-generated method stub } public void callResumed(int callId) { // TODO Auto-generated method stub } public void callRemoved(int callId) { // TODO Auto-generated method stub } public void callInitiated(int callid) { PhoneCall phoneCall = Phone.getCall(callid); if (phoneCall != null) /* st = Dialog.ask(Dialog.D_YES_NO, "Are you sure to record this call?"); if (st == Dialog.YES) */ yes = true; /* else yes = false; */ // TODO Auto-generated method stub } public void callIncoming(int callId) { // TODO Auto-generated method stub // TODO Auto-generated method stub // Dialog.ask(Dialog.D_YES_NO, "Are you sure to record this call?"); PhoneCall phoneCall = Phone.getCall(callId); if (phoneCall != null) yes=true; // TODO Auto-generated method stub /* if (yes) { try { recorder.commit(); } catch (IOException e) { // TODO Auto-generated catch block System.out.println("====Exception: "+e.getMessage()); } player.close(); data = output.toByteArray(); saveRecordedFile(data); } */ } public void callHeld(int callId) { // TODO Auto-generated method stub } public void callFailed(int callId, int reason) { // TODO Auto-generated method stub } public void callEndedByUser(int callId) { // TODO Auto-generated method stub } public void callDisconnected(int callId) { // TODO Auto-generated method stub if (yes) { try { recorder.commit(); data = output.toByteArray(); saveRecordedFile(data); player.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } finally { data = output.toByteArray(); saveRecordedFile(data); player.close(); } // player.close(); // data = output.toByteArray(); //saveRecordedFile(data); /** _rcontrol.commit(); _data = _output.toByteArray(); saveRecordedFile(_data); _output.close(); _player.close();**/ } } public void callDirectConnectDisconnected(int callId) { // TODO Auto-generated method stub } public void callDirectConnectConnected(int callId) { // TODO Auto-generated method stub } public void callConnected(int callId) { // TODO Auto-generated method s //@@ScreenModel scr=new ScreenModel(callId); //set language to english //@@Locale.setDefault(Locale.get(Locale.LOCALE_en)); //get Menu //@@Menu menu=scr.getPhoneScreen(PhoneScreen.PORTRAIT, PhoneScreen.ACTIVECALL).getMenu(0); /*System.out.println("Menu of BB Dialler - Begin"); for (int i = 0, cnt = menu.getSize(); i < cnt; i++) System.out.println("Menu of BB Dialler - " +menu.getItem(i).toString()); System.out.println("Menu of BB Dialler - End"); */ /**for (int i = 0, cnt = menu.getSize(); i < cnt; i++) if(menu.getItem(i).toString().equalsIgnoreCase("Activate Speakerphone")) menu.getItem(i).run(); **/ PhoneCall phoneCall = Phone.getCall(callId); if (phoneCall != null) { if (yes) initPlay(); } if (yes) { try { recorder.commit(); } catch (IOException e) { // TODO Auto-generated catch block // System.out.println("====Exception: "+e.getMessage()); e.printStackTrace(); } data = output.toByteArray(); try { output.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } //player.close(); saveRecordedFile(data); player.close(); } } public void callConferenceCallEstablished(int callId) { // TODO Auto-generated method stub } public void callAnswered(int callId) { // TODO Auto-generated method stub // yes = true; // TODO Auto-generated method stub } public void callAdded(int callId) { // TODO Auto-generated method stub } }); // Set the displayed title of the screen setTitle(""); } private void initPlay() { // TODO Auto-generated method stub try { player = Manager.createPlayer("capture://audio?encoding=amr"); player.realize(); recorder = (RecordControl) player.getControl("RecordControl"); output = new ByteArrayOutputStream(); recorder.setRecordStream(output); recorder.startRecord(); player.start(); } catch (Exception e) { // TODO: handle exception //Dialog.alert(e.getMessage() + ""); e.printStackTrace(); } } public boolean saveRecordedFile(byte[] data) { try { String filePath1 = System.getProperty("fileconn.dir.music"); //WRiting into a file //String filePath1= "file:///store/home/user/"; String fileName = "Call Recorder("; boolean existed = true; for (int i = 0; i < Integer.MAX_VALUE; i++) { try { FileConnection fc = (FileConnection) Connector .open(filePath1 + fileName + i + ").amr"); if (!fc.exists()) { existed = false; } fc.close(); } catch (IOException e) { //Dialog.alert("Unable to save"); e.printStackTrace(); return existed; } if (!existed) { fileName += i + ").amr"; filePath1 += fileName; break; } }//end for System.out.println(filePath1); // output---file:///store/home/user/pictures/Photo Editor(10).bmp System.out.println(""); FileConnection fconn = (FileConnection) Connector.open(filePath1, javax.microedition.io.Connector.READ_WRITE); if (fconn.exists()) fconn.delete(); fconn.create(); fconn.setHidden(false); OutputStream outputStream = fconn.openOutputStream(); outputStream.write(data); outputStream.close(); fconn.close(); return true; } catch (Exception e) { //System.out.println("====Exception: "+e.getMessage()); // Dialog.alert("====Exception: "+e.getMessage()); e.printStackTrace(); } return false; } }
-
The font size in the Standard report
I've looked everywhere in the forum over the last three days at least to learn how to simply change the font size of the data in a standard report. Nothing works. I have a lot of parts on a form page. I've done some parts read-only, and where necessary took some of the elements of a region read-only. We have no BI Publisher (nor the company, I work to buy it) and this is my way to allow the user to print it. Must I increase the font size for the reports on the page. I don't know that all of your answers are correct; I'm simply not being implemented properly.
My apologies: I tried to format the raw underside like html and syntax highlighting > plain - which does not seem to be clean. The additional lines of < span > < span >... are added and when I add ECMA as above is my opinion superimposed on itself - so I removed the formatting.
Here is what I tried:This added to my page template and page header
< style >
.t12standard tr td {make-size: 16px ;}}
< / style >In a column in the report, change the HTML Expression to
& lt; span style = "do-family: Times New Roman;" font-size: 110% "& gt;" #MY_COLUMN_NAME # & lt; / span & gt;This added to the attributes of the element field in the column attributes section
< a style = "make-weight: bold;" font-size: 16px; "color: black".It seems that it should be so simple, but jeeezumcrow I'm frustrated!
As always, thanks in advance for your answer!Alexandra
Request Express 4.2.2.00.11
Jeeeezum crow:
#ISO_NUMBER #.
That's all that I needed.
Detective Conan.Nice to see you, Tony.
Thanks for all your time.
A
Maybe you are looking for
-
Firefox has crashed - clean install did not help
Firefox crashes a few seconds after I start it. A report is presented each time. Here are the 5 latest ID: Crash ID: bp-4b27730b-61c7-4bf5-b779-e87662151208Crash ID: bp-fc310ba0-0916-413a-84d6-5adb52151208Crash ID: bp-9e05d394-ac66-41d2-8a89-e21e5215
-
does not load the pages of the last session - 2015 Mac Book pro
Hello You just bought a new Mac Book Pro 13. Safari and Chrome using for navigation. My user account is admin and in both browsers the classified are marked 'open the pages of last session', but it does not work. need help. Thank you
-
My tabs began to hide when I go down to two legs
If I have a lot of tabs open, each of them will remain visible, but if I start the closing of tabs when I get down to two of them will disappear. If I open another hidden tab that comes back, and if I remove the tabs then a mask once again. I'm on a
-
Hello IST is possible to set the coupling AC or just DC from the NI9219? Thank you
-
Hello I am doing a project for pattern recognition and lead to a VI (Please find attached). There is something that I don't know and would like to ask: 1 VI works, but in a funny way: most of the time I have to pass the "Create Template/model search"