OIM11GR1 - request for additional attribute on the approval of the task

Similar Questions

• What api to update the additional attributes of the employee

  Hi all
  
  I created all of my employees using hr_employee_api.create_employee, now I need to update in bulk the additional attributes for each employee (e.g. attribut1, attribut2... etc). What api should I use to do.
  
  Thanks and greetings
  
  Zulfiqar haider

  Hello
  I think you can use HR_PERSON_API. UPDATE_US_PERSON to update the attribute columns. Please check in your test before proceeding
  You can use it for your final update in bulk. Hope this helps you.

  Thank you
  Satin

• Set the scale of thermocouple at table for a channel in the task

  I create a task that contains 9 measures voltage and 10 by thermocouple programmatically. All the thermocouples are of Type T. I just want to read one of the thermocouples up to the limit of 30 k. NOR for the Type T is 73 K.

  I understand that the lira below their limit thermocouples OR is to change the scale type to table using a property DAQmx Channel node. However, because I take different types of measures, I need to isolate the channel particularly thermocouple. If I move the entire task to the node property DAQmx channel and try to set the scale of the type of thermocouple to table, I get an error because the voltage channels do not support this property. I can't understand how to get individually on channels of the task. I don't want to separate the measures into two tasks, because then I have to do to synchronize the clocks of additional programming.

  I have more than one idea: use a DAQmx create task VI at the beginning. Do a global virtual channel to MAX for the thermocouple that I want to change the type of ladder for. Place a constant for this virtual channel and run through the DAQmx Channel property. Use the task of creating DAQmx to create a task containing this global virtual channel. Pass this task to a bunch of DAQmx create Virtual Channel screws to add other measures to the task.

  This makes a lot of the scalability of my program and seems to be the wrong shape in general. Looks like there should be an easier way to do it. Any ideas? Thank you!

  Hello

  Try to use the property node of channel Active channels (ActiveChans) that is by specifying the string "isolated" as its input, and then adding the (HAVE. Themcpl.ScaleType) in developing the property node even by setting its entry. The property node Active channels specifies a list of virtual to change channels or virtual channel. Virtual channels are in a specific job. NOR-DAQmx configure all channels in the task if you do not set this property

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

• How to activate permanently on "Show processes for all users" in the Task Manager

  I have a facility with windows 7 installed twice.  will receive run the Task Manager in the initial installation of windows the "show processes from all users" is checked by default and visible.

  However, in the second installation on a spare drive will receive run that task manager this option is converted (boxed) and must be clicked but the machine doesn't remember this setting.

  How can I get windows 7 to continuously show me processes for all users?

  Thank you footoomsh

  Hello

  Are you logged on as ADMINISTRATOR?

  The Task Manager - create a shortcut high
  http://www.SevenForums.com/tutorials/10499-Task-Manager-create-elevated-shortcut.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problem installing Firefox 3.6.8 as error "no request for assistance" to open the file

  Used a netbook Asus Linux / Firefox version 2.0.0.0.11 for 3 years without problems. Now I can't use "Hotmail" on it, because it requires an update to the version as above.

  It appears to download but not to open it and I get the message "could not be opened because there is no such thing as the doe to request assistance associated with" I'm not sure where I should be downloading it too but chose home/user.

  I use very basic but verified the file 'open with' settings and there is no demand for a tar.bz2

  Any advice would be much appreciated

  Have you read all the 12 pages of this thread?

  http://Forum.EeeUser.com/viewtopic.php?id=41815

  I can't help myself, because I have done this process once and I wasn't happy with Firefox 3 on Asus / Xandros when I was tired. The next day, I installed Ubuntu 10.04 - EasyPeasy remix - http://www.geteasypeasy.com/

• Simulator Device.xml file has a tag with an attribute of memory, what are the optional values for this attribute of the os?

  In the Device.xml file, it starts with the tags of the os. Each os has a memory attribute. What are the optional values for the attribute memory?

  Can we really control the memory for the simulators?

  0x85000F03
  0x8C000F03
  0x87000F03
  0x84001503
  0x86001503
  0x04001507
  0x0F001507
  0x0C001404
  0x0D001404
  0x0E001404
  0x0D000D04
  0x16000D04
  0x05001504
  0x07001504
  

  These values refer to specific hardware configurations are simulated.  They should not be changed.

• How to give the default value for an attribute in the OPA

  Hello
  
  I need a default attribute boolean to true at the beginning of the session of the OPA. I need to use it to control the visibility on some pages.
  
  Can someone please throw light on how to best implement this?
  
  Thank you.

  You have a few options (as always with the OPA!)

  If you use determinations of Web and that you have defined your own screens, then the easiest way is to define a default in the screen - you can either do a default static or dynamic based on an attribute is proved by a default rule.

  If you want a value by default when you debug without using screens, so you're better off just writing a rule to set the default value. It's kinda interesting with a Boolean value as you do not need to tell the value of the attribute OPA - it is inherent in the name of the attribute. For example, if you had a conclusion "control is visible" (with no = "true" or whatever it is) it would be set to 'control is visible' to 'true '. Set it to false, you simply need to type "control is not visible" - which actually (thanks to OPA assuming a 'subsidiary conclusion') defines "control is visible" to "false".

  You can then replace it in the debugger of via a screen issue (if you force the question).

  I don't know how it would work with server of determinations if you had a default value proved by a rule, but has also provided a value in the data - maybe someone else can clarify if the rule takes precedence over the input data? My usual approach is to try locally in OPM and see (using something like SOAPUI to integrate with the determinations OPA server web service). If that's the best way to implement this course (or indeed if using a default value of visibility control screen is best practice) is difficult for me to say - I am a relative beginner!

  Hope that helps a little...

• request for additional quota - Natixis Magellan project

  Phil,
  (pls tell me if this is not ideal for the application. In this case, I'm happy to do it "common sense").
  
  
  We head to iprojects to the hive online for our Natixis Magellan project. We have multiple workspaces and struggling to quota suite (after cleaning). Can we please have the following quota extensions?
  -MAGELLAN_ -AFDelivery_Workspace-> we'll have 3 GB pls?
  -MAGELLAN - training Interfaces-> we'll have 3 GB pls?
  -MAGELLAN - vertical training-> we'll have 3 GB pls?
  Workflow - MAGELLAN - training-> we will have 2 GB pls?
  -DFSMAGELLAN_ - Validation_NF-CF_Workspace-> we'll have 3 GB pls?
  
  TX a lot and sincere friendships.
  Kris Van Cleuvenbergen

  Kris,

  OK, the workspace have the quota requested - we try to get a better way of quota request put in place soon. Watch this space.

  Phil

• Request for Balance/amount of the historical Transaction summary

  Hello

  I'm working on a report in which one quantity/must correspond with a quantity / in transactional historical summary.

  Amount through my query = quantity in transactional historical summary.

  But balance through my query! = Balance in transactional historical summary.

  
  

  Query is-

  SELECT

  item_id, SUM (target_value)

  Of

  (

  SELECT

  item_id moqv.inventory_item_id, SUM (transaction_quantity * item_cost) target_value

  Of

  mtl_onhand_qty_cost_v moqv

  WHERE

  moqv.organization_id =: org_id

  AND moqv.inventory_item_id = NVL(:Item_id,moqv.inventory_item_id)

  GROUP BY

  moqv.inventory_item_id, moqv. Item_Cost

  UNION ALL

  SELECT

  MMT.inventory_item_id item_id,-SUM (transaction_quantity * actual_cost * nvl(currency_conversion_rate,1)) target_value

  Of

  mtl_material_transactions mmt, mtst mtl_txn_source_types

  WHERE

  MMT.organization_id =: org_id

  AND transaction_date > =: user_date + 1

  AND mmt.transaction_source_type_id = mtst.transaction_source_type_id

  AND mmt.inventory_item_id = NVL(:Item_id,mmt.inventory_item_id)

  Mmt.subinventory_code GROUP, mmt.inventory_item_id

  mmt.subinventory_code is not null

  )

  ITEM_ID GROUP;

  Please, someone at - it help me, what changes are required to achieve the desired result.

  Thanks in advance

  Kind regards

  Anurag Sharma

  Select cost * quantity balance

  Of

  (select round(actual_cost,5) cost, inventory_item_id)

  Of

  mtl_material_transactions one

  where

  inventory_item_id =: ITEM_ID

  and TRANSACTION_DATE<>

  and transaction_id = (select max (transaction_id) in the mtl_material_transactions where inventory_item_id = a.inventory_ITEM_ID and TRANSACTION_DATE<=:p_to_date))>

  (select item_id quantity, sum (target_qty) of)

  (SELECT

  target_qty, item_id

  Of

  (

  SELECT

  item_id moqv.inventory_item_id, SUM (transaction_quantity) target_qty

  Of

  mtl_onhand_qty_cost_v moqv

  WHERE

  moqv.organization_id =: orgn_id

  - and SUBINVENTORY_CODE ('PC store', 'STORE of RTV')

  GROUP BY

  moqv.inventory_item_id, moqv. Item_Cost

  UNION ALL

  SELECT

  MMT.inventory_item_id item_id, target_qty SUM (transaction_quantity)

  Of

  mtl_material_transactions mmt, mtst mtl_txn_source_types

  WHERE

  MMT.organization_id =: orgn_id

  AND transaction_date > =: p_to_date + 1

  AND mmt.transaction_source_type_id = mtst.transaction_source_type_id

  - and MTM. SUBINVENTORY_CODE ('PC store', 'STORE of RTV')

  GROUP BY mmt.inventory_item_id

  )

  WHERE item_id =: ITEM_ID

  ) z, msi mtl_system_items

  where msi.inventory_item_id = z.item_id

  and msi.organization_id =: orgn_id

  Group item_id) xyz

  where xyz.item_id = abc.inventory_item_id

  Thanks for the help... I found the solution.

• 2nd signature required is not requested for: document finalised after the first signature!

  We are VERY DISAPPOINTED that it is obviously not more direct support of this product, or is phone - this not correct? If so, we don't remember this change notification.

  Speaking of which, without any alteration to a form of signature which includes three steps: 1) Prefil, 2) all the information and signed by the client and 3) countersign date by us and all of a sudden after working for months, he comes back and is supposed to be completed once step 2 is completed. There is no way later to fill the countersignature. I checked that the fields are still reported as such, but very recently, the third stage (without date or signature even filled) ends from step 2 is done. Something is broken and it is apparently not possible to get immediate assistance from Adobe on this.

  Things change suddenly in the way that documents are processed without warning advanced e-mail, then suddenly things break and there is nobody to contact directly for assistance. It turns out that if we go back to the classic shape everything works fine because you still have the box "I have need to sign. The 'new' shape (of shit) said anything about it? NO! Instead, he proposed adding a "me" and various other areas, with absolutely no explanation of what they are and how they are supposed to work!  Thank you, Adobe, make the new procedure so obvious and undocumented. NOT.  I should send you a bill for all the time spent trying to figure this on my own because of the absence of any reasonable support more. You are a paper company, but you seem unable to adequately document your own products. Taking the human support was a horrible move on your part - it could have been resolved in 5-10 minutes. In any case, it is marked and done and resolved and I hope and pray I will never work on a question like that again. You're just better not take the classic option.

• There is no request for 'Shared Services' in the Group of the Foundation

  Hello world!

  I am facing a problem during the installation of the EPM system.

  After the deployment of Foundation services, there is no demand for services registerd shared in the Group of the Foundation

  I looked in 'Shared Services' = > 'Groups Appication' = > 'Foundation' only -Manager of calculation and -EMP architect

  I tried to redeploy the service of the Foundation, but is not shared Services Application

  I looked in the table HSS_COMPONENT with COMPONENT_TYPE = 30 and did not find the Shared Services

  This application exists on the production server, I tried to export application Service sharing of production on the new server using LCM, but error

  EPMLCM-18000: name of the invalid application - SSP MDF.

  Everyone knows how to save Shared Services Application?

  
  

  
  

  Solve the problem by inserting manually lines HSS_COMPONENT, HSS_COMPONENT_PROPERTY_VALUES, HSS_COMPONENT_LINKS

  as on the production server

  insert into HSS_COPMONENT values (' 1111.HUB ',' Shared Services ', 30)

• Request for an update in the sys.registry$ view history

  
  Hi all

  I have successfully installed the July 2013 PSU on oracle 11g.

  Know that when I ask the sys.registry view $history it still shows the old patch time and date.

  Select ACTION_TIME, VERSION, COMMENT of the sys.registry$ history.

  3 MARCH 13 09.13.27.539465 AM 11.2.0.2

  POWER SUPPLY 11.2.0.2.9

  Can some please update me on this.

  Thanks in advance.

  You must run the psu catbundle apply that script inserts at the end entry in the history table.

  This step is in the Readme for the patch.

• Space for additional browser to the right of the page

  Hello

  I hope someone may be able to help, I noticed the site in the link below has about an inch of extra space to the right of the page.  The header and footer of the containers are all set to the width of the browser, so I'm puzzled as to why this additional space is visible.  I removed the image, but it made no difference.

  HOME PAGE |  Total clothing Solutions

  Thanks in advance

  Open the page in Design view or model. .... Do a select all and I am sure that you will find an empty box or the text box outside your design which is causing your site to change.

• How to ignore requests for password when creating the DB with the DBCA shel scripts

  When generate a database with scripts automatically passwords DBCA asks 1 2 times at the beginning and 1 initializing ora.ini DB.
  
  I should replace the lines as
  Connect "SYS" / "' & & sysPassword ' as SYSDBA"
  with the password that is real because it's a public password to test databases.
  
  P. S.
  If these questions are not apropriate and a burden for the cmmunity you can inform me.
  Up to now, if I can't find something on common search keywords, I add it, believing it to be a contribution to the knowledge base of the Oracle communities

  I found the solution. As MarkDPowell has pointed out, invited because ACCEPT input so have to comment on it.

  And I can pass my own password public as a variable to SET - http://docs.oracle.com/cd/B10501_01/server.920/a90842/ch13.htm#1008884

  P. S.

  I'm trying not to let the non-answered son.

• Make a request for generic insertion in the ODI procedure

  Hello
  I am writing an ODI procedure to insert into a table my sql is simple:
  
  Insert into ci_txn_header_k
  Select t.txn_header_id, f.env_id
  of ci_txn_header t, f1_installation f
  where t.bo_status_cd = 'HANGS' and t.txn_header_id not in (select txn_header_id from ci_txn_header_k)
  
  I want to make this generic query and use the functions of REF ODI in it.can I get the schema name and table using the Odiref functions. If yes then please guide me how

  Hello

  Import all tables referred to in your query in a logic model / models.

  ci_txn_header_k
  ci_txn_header,
  f1_installation f

  Suppose you import the tables into a logic model / schema called "GENERICS".

  Then just reference them using <%=odiRef.getObjectName("L""CI_TXT_HEADER","GENERIC","GLOBAL","D")%>

  IM using the "GLOBAL" context in my example above, replace with your context.

  So, something like:

  Insert in <%=odiRef.getObjectName("L","CI_TXT_HEADER_K","GENERIC","GLOBAL","D")%> k
  Select t.txn_header_id, f.env_id
  Of
  <%=odiRef.getObjectName("L","CI_TXN_HEADER","GENERIC","GLOBAL","D")%> t,
  <%=odiRef.getObjectName("L","F1_INSTALLATION","GENERIC","GLOBAL","D")%> f
  where t.bo_status_cd = 'HANGS' and t.txn_header_id not in (select txn_header_id from <%=odiRef.getObjectName("L","CI_TXN_HEADER","GENERIC","GLOBAL","D")%>)

  Hope this helps, check out the ref of the Substitution of the API for a guide, also worth looking at knowledge Modules and how they accumulate clauses in LKM and IKM steps - you can learn a lot by referencing existing code that is supplied with the product.

  Concerning
  Alastair