Qosmio G30-161: Cable for HDMI output on DVI input

Similar Questions

• Qosmio G30 - no sound on HDMI output

  Hello world.

  I read a lot of documents in this forum about my problem but no solution now.

  I have connected my Qosmio G30-155 (windows vista ultimate) to a full HD Samsung tv with an hdmi cable and the video is fine, but no sound. The sound is in the laptop speakers.

  I have the latest drivers: sigma - 6.10.5462.0

  TV works fine with DVD through HDMI recorder.

  Any idea?

  Thanks in advance.

  Hello

  Did you also check Bulletin for technical support with title cannot hear audio through a HDMI connection on a Qosmio G30 in Windows Vista?

• Need help with my Toshiba remote control and receiver for Qosmio G30 161

  Hi all

  I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

  I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

  Also to confirm that I'm under addition of Windows XP MCE.

  Anthony Worlock

  Hello

  This remote will work, if you use it without any special drivers and special software, only in the Media Center.

  But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

  Please try this tool and check if it works.

  By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

  Welcome them

• Qosmio G30 - external display problem (HDMI)

  Hello

  I have Dell UltraSharp 2407WFP display with HDMI and DVI (with HDMI DVI converter) entry - I use HDMI as my primary connection. My Qosmio has NVidia 7600 Go card with the latest drivers provided by Toshiba for Vista 32 bit (version 7.15.10.9813).

  My monitor was working fine months ago (same thing with my HDMI TV) I had no problems - but now I have a constant flickering problem (goes black watch my office then becomes black again) computer laptop monitor and no image on external display at all and I get 'balloon' message in the taskbar that my display driver has stopped working and it recovers when I leave my HDMI cable.

  any ideas?

  Thank you
  Bran.

  Hi Brani

  It seems that the error comes from the display driver.
  Why you n t try to remove the old display driver and try to reinstall the graphics driver of the European driver Toshiba page
  You may notice some improvements.

  By the way; It might be useful to know that the Qosmio G30 supports the standard HDMI V1.1 (up to 1080i resolution).

  Good bye

• Re: Replacement of battery Qosmio G30-161

  Hello world

  I need assistance to find a battery for the Qosmio G30-161. SO the model for battery: PA3475U-1BRS... DC 10.8V is 7050 mAh
  I found the following batteries... Don't you think that it will be wok?

  http://www.duracelldirect.dk/baerbar-laptop-notebook/Toshiba/Qosmio-G30-batteri-adapter-oplader.html

  I have another question. What happens if I use the laptop without the battery. Who is using the only power adapter? I never used the battery anyway and found out that it must be replaced!

  Thank you very much

  great vows

  Hello

  > I found the gollowing batteries... Don't you think that it will be wok?

  to be honest, I don't know much about your model, but I found a site;

  http://www.batterystyle.com/Toshiba-Qosmio-G30-161-battery-p-87174.html

  I think, it is compatible

  > I have an another question... what happens if I use the laptop without the battery... that is using the only power adapter?

  Yes, you can use it. I still use my old laptop IBM without battery

• Qosmio G30-161: can not see the second HDD in my computer

  Hello
  can someone tell me, that I rebooted reboot DVD in my laptop to restore all of the windows in the normal settings
  as I got when I bought the laptop.
  but for some reason when I go into my computer I do not see the 2nd HDD.

  There is only one disk c it but not the other hard drive. I need to change the settings of smoke to see the 2nd hard drive?

  Hello

  Well, the Qosmio G30-161 should be delivered with two hard drives of 60 GB.
  I guess you can see a single HARD disk due to the RAID settings.
  The unit supports RAID technology.
  I think that the RAID is on the mirror. This means that the data is duplicated on both disks.
  Generally, it should be possible to disable the RAID.
  Check the folder utilities Toshiba.

  PS: It is possible that you will lose data after changing the RAID settings. Be careful.

• Qosmio G30-161: how to install XP or where to find the restore CD?

  In my other post (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=29959&tstart=0) I asked if anyone had a solution to my problem, I thought at that time was RAID configuration. It turns out that it is my CD is corrupt.

  So now I need a new Qosmio G30 - 161 XP MCE install CD. Now, I've heard that there are a few programs, Fx. nLite, which can put drivers into XP installation. Is this true? I have a Win XP Prof instal cd.

  So here is my final questions (prioritized :))):

  1. How can I make my own CD for Win Xp MCE or Pro install?
  2. what drivers need to be included in the cd?
  3 should. what program I use?
  ______________________________________________

  4. If it is not possible for me to create my own CD, where can I buy one that works with my Qosmio G30 - 161?

  A response is much appreciated and wanted :) Please help me out here. I thank very you much in advance!

  Hello

  Yes, you can use the freeware software nLite to build your own windows CD and include the various drivers.

  With regard to the point:

  (1) I think you should google for nLite, because much useful documentation and instruction how to use the program nLite.
  (2) If your laptop supports the RAID drive I would recommend including only the RAID driver. Other drivers, you can install after the installation of Windows operating system
  (3) nLite is ok
  (4) you can order the new collection of EPA, which is responsible for your country.

  Best regards

• Qosmio G30-161: cannot receive the signals of TV in MCE

  I recently bought the Qosmio G30-161 and have problems with watching TV via the media library. I get an error message that there is no signal. However another TV tuner I installed separately I'm not having any problems.

  I read somewhere that this could be solved by installing the last disc of tv tuner. If anyone can confirm this? If Yes, when I try to download the player from Toshiba online support, which comes in a file zip, after extracting it I don't see an option to install it.

  Thank you

  The second TV tuner installed on your Qosmio?
  Have you tested to receive TV signals without the second tuner but only with Qosmio internal tuner?

• How can I find out what kind of RAM my Qosmio G30-161 has?

  I want to add more ram to my qosmio G30-161. I couldn't find any info on what type of ram or max ram that can be added to the manual. I read once but can't remember wherever it is max 4G with 2g of each... DDR2.

  I use windows media center as operating system-32 b.

  My question is where you can find information on the extension of the memory? so that I can buy good ram

  I found some info on Qosmio G30-161 and RAM upgrade.

  Here we go:
  Your model of laptop can be upgraded with 4 GB RAM max. So, you can use 2 x 2 GB RAM.
  According to Toshiba, you use PA3513U-1M2G (DDR2-667 2 GB Memory Kit).

• Qosmio G30-161 PQG30E: HD-DVD, it does not work

  HI -.

  I have the specifications of the models below, and when I try to use a HD-DVD it does not work. I followed another thread re HD DVD but it seemed to apply only to Windows Vista, but as you can see below I just Windows XP but apparently the HD ready display.

  Any ideas? Thank you, Robin

  Qosmio G30-161
  Part number: PQG30E-024024EN
  Main features
  -Technology Intel Centrino Duo Mobile T2300 to Intel Core Duo processor
  -Genuine Windows XP Media Center Edition
  -120 (60 + 60) GB HDD
  -1 024 (512 + 512) MB of RAM DDR2 (533 MHz)
  -17 "screen Toshiba TruBrite WXGA + TFT
  -Drive DVD Super Multi (Double Layer)

  Sorry but I don't understand your problem. You wrote just HD-DVD, it does not work. What exactly do you mean? The optical disk drive does not work or you can't watch HD-DVD movies?

• Problem ports USB 2 with a Qosmio G30-161

  I have a Qosmio G30-161. You need ports 4xUSB2.
  Whenever I connect a USB2 device I get a pop up message saying he would run faster in a USB2 port.
  This happens with all devices in all ports.
  I checked my device manager, which shows the 5 host controller and Hub 4 x USB root.

  Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 8
  Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 9
  Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
  Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
  Intel (r) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
  USB root hub
  USB root hub
  USB root hub
  USB root hub

  I tried to manually edit the other host of the Enhanced controller - 27CC.
  All I get is an error that the device cannot start.

  Any help to solve this problem would be much appreciated...

  Thank you
  Imran

  Hi Imran

  Something like that shouldn't happen, especially if your laptop has the factory settings. One of my friends has the same laptop and it works like a rocket. No problem at all. It does not mater what external device is connected to one of the USB ports, device will be recognized correctly and the data transfer is very good.

  In your case, it will be interesting to know if your laptop has factory settings (preinstalled with recovery media) or your own installation of the OS. Maybe this info can help us understand what is happening exactly.

• Connection G30-161 to the HDMI on LCD TV

  Hi, I just bought the G30-161 and I was wondering how to connect to a HDMI input on the LCD TV. It does not have the HDMI, but has the other connector of D2. I tried to find conversion leads, but have not met any. Does anyone have any suggestions? Thank you

  Hello

  In my opinion there is no sense to use on your LCD TV HDMI port if the laptop has no HDMI output port. If you use a different video output port you won't be HD quality. The same situation is with my Qosmio G20. My LCD TV has HDMI port, but I'm using delivered cable SCART to connect.

• QOSMIO G30 - no sound on HDMI when connected to HDTV in XP MCE.

  Hello-

  Can anyone help with a frustrating problem... How output sound on HDMI in Windows XP MCE?

  I place the video on HDMI output using * Fn + F5 *-I get a perfect image on my HD TV. However, the sound always comes from my laptop speakers.
  I have all the latest drivers and BIOS downloaded from the Toshiba site.
  I entered the settings audio and Sigmatel and tried everything, in particular by unchecking + 'Activate Dolby Digital Live Support' + within the Dolby tab which is recommended in a support forum.
  Nothing works!

  It's relatively easy in Windows Vista, because you can change the audio device by default for + the device of digital output (S/PDIF) + and which switches to HDMI audio, but there is no option under XP MCE.

  Someone who can help to solve this problem is rewarded with all the points and have total gratitude and respect :-)

  Thank you

  Mark

  It is a Toshiba FAQ:
  + No signal on HDMI on Qosmio G30 under Vista +.
  http://APS2.toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm

  But he of described the problem with Vista OS.

  However, the screenshot shows the codec high definition audio Sigmatel.
  I guess it is the same device that you can see in the menu drop-down

  Maybe you have to activate it.

• Qosmio G30: No sound via HDMI after installation of Vista

  Hello..
  After installing Vista on my G30 HD DVD I have no sound on any application via a HDMI cable. Sound works fine on the internal speakers. He also worked very well under XP. Can anyone help?

  Hello

  The noise does not appear on the external HD TV which was connected to the Qosmio G30 via an HDMI cable. But the internal speakers work. Am I wrong?

  Buddy you check the sound options in the control panel?
  Check if all controls are set at a higher level and are not disabled!

• Qosmio G30 - 161 - recovery disk does not work

  Hello world

  I need help to understand what happened with my laptop G30-161

  The last time I tried to reinstall the product recovery things was wrong.
  The time where computer supposed to install windows then a blue display screen and stops the process and I get a black screen where there are three choices: start windows normally, or with the command prompt or networking safe mode.
  When I tried safe mode: I get a message that windows is not yet installed!

  When choose ok then the windows install see the screed for a few seconds and then the blue screen appears and disappears a few seconds and the windows on the screen appears as if the system will be installed, and after a few seconds, I get the same - back screen with the choice of the tree again.

  I tried several times to use the product recovery disc and enter in the same circle.

  great wishes to you all

  Hello

  > I have tried several times to use the product recovery disc and I enter the same circle.
  Are you sure you have booted from the recovery disk?
  This seems strange to me that you get the back same screen (start windows normally, or with the command prompt or networking safe mode) when you start drive recovery.
  These three options are displayed only if the laptop would be started from HARD drive.
  So please try to boot from the CD again.
  Insert the CD, turn on the unit, press F12, choose ODD as a source of start-up and follow the instructions on the screen.

  If this is not possible, then I would recommend the HARD drive.
  I recommend Drive Fitness Test. This software freeware s (google).

  Perhaps something went wrong with the HARD drive.