Old device restarts when you receive an order

Similar Questions

• Xperiaa Z3 Compact restarts when you receive calls.

  My 2 month od Z3 Compact it recharges when it receives calls from inncoming. This happens especially if all other apps are open or in use, not when the phone is just "inactive". Tried to WCDMA, GSM, WCDMA (peferred) GSM and WCDMA/GSM - no change of LTE (preferred).

  Traveled 'repair phone' support ' new install (?) - no change.

  Tried to restore the factory - no change.

  Every time that happens the incoming call is not registered as "missed calls" in the call log.

  Tempted to throw!

  The phone worked without any problem, because I'm back. Another thing I noticed: the phone works quite a bit 'cooler '. Before that I sent in, could hardly touch the back after 10-15 minutes of active use on the net or "candy overwhelming." I don't know Excactly what caused what to break. It was overheated, which makes the failure of the motherboard or motherboard causing the heat?

• The third conference end point Visio restart when you receive a call

  Hello world

  I'm working on a x.8.2 of Cisco Telepresence video Communication Server, I was able to check third-party devices (Polycom VSX 7000 a, software

  Release 9.0.6.1 version) on this subject, but when I try to call these devices, they restart, knowing that I have no problem with endpoints of Cisco.

  Can you help me?

  Thank you, guys, in advance.

  According to the release notes of Polycom for 9.0.6.2 that this has been fixed in the previous version, which is what you run. You may be a 9.0.6.1 early release? I would upgrade to 9.0.6.2. Page 12 of the release notes, you will see this problem.

  http://downloads.Polycom.com/video/VSX/9_0_6_2/vsx_vseries_relnotes.PDF

  Interoperability: Tandberg VCS GK	VIDEO-85528	Previously, when Polycom VSX received order join the restarted control VCS Tandberg, VSX doorman. This problem has been fixed.

• Calendar has a number surrounded by a circle of red by its icon as when you receive mail. What it means?

  Calendar has a number circled red by its icon as when you receive e-mail notices. What it means?

  Someone has sent you an invitation of calendar or event.

  For more information:

  https://support.Apple.com/kb/PH22692?locale=en_US&viewlocale=en_US

• How can I get a light flashes when you receive calls if you can call silence please

  How can I get a light flashes when you receive calls if you can call silence please

  Hello Linda08,

  Go to setting/general/accessibility, walk down for hearing and toggle "Flash LED for alerts"

• When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  Hi royster677,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your iPhone. If you are having problems with the tone of the text for a specific user, you can check the parameters of Contact of the user (under the Edit button) as shown in the following page of the User Guide:

  Contacts at a glance - iPhone

  If everything looks correct, and you still have questions, you can also check your settings stuck and do not disturb:

  Block calls and messages to block or filter on your iPhone, iPad or iPod touch - Apple Support

  Use of do not disturb on your iPhone, iPad or iPod touch - Apple Support

  Concerning

• My Iwatch vibrate when you receive a text. Should she make a sound?

  My shows I vibrate when you receive a text. Should she make a sound?

  Hi Larry

  Sound alerts and haptic depend on your settings. To check their:

  On your iPhone, app in the watch, go to: My Watch (tab) > Messages.

  -For example, you might set this parameter to custom, and then, under alerts, select each of the alerts to show, sound and Haptic.

  Also on your iPhone app in the watch, go to: Watch My > sounds & Haptics - check that:

  -The alert Volume selector is where you want it to be;

  -Silent Mode is not enabled;

  -The switch force haptic is in the central position or the right hand.

  -Eminent Haptic is enabled (to get before announcements of current alerts).

• What do you do when you receive a consistent message on a disk space?

  What do you do when you receive a consistent message on a disk space?

  Moved from the community involvement Center

  Original title: * E-mail address is removed from the privacy *

  Hello

  You tell us your operating system or what drive/partition gives you this error message.

  You can click Start > computer > know what partition is has insufficient disk space.

  C: System drive, follow these steps:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  By default system restore also includes 15% of the capacity of your hard drive.

  You can change the size of it:

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  ______________________________________

  If it's your recovery Partition, read this information:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon

• HP color laserjet 2605 Error error restart when you print the document

  HP color laserjet 2605 error restart when you print the document, please give me a solution?

  Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

  I hope that the discussion can be useful for each of them, thank you

• How the creative cloud is downloaded when you receive error 1?

  How the creative cloud is downloaded when you receive error 1?

  Follow the solution 2 here, http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

  If this fails, clean and reinstall by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• The computer restarts when you try to stop.

  When I try to shut down my computer, it automatically performs a reboot, forcing me to manually shut down the computer with power butter. In addition, the computer sometimes restarts automatically if left idle for too long.

  Hello

  Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
  Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
  Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
  Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
  power off.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------------------------

  Check with this utility, just in case there is a situation of blue screen.

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  ------------------------------

  Also this, so you can see the probable bluescreens. (You can or may be able to)
  see them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I/o device error when you run the backup

  I'm trying to run a backup of a Dell Inspiron with Windows 7 on a Toshiba 500 G hard drive.  When I start the backup everything looks good, the backup is running.  He has worked for several hours and then he said: the backup could not be completed.  When I check on 'additional information' it says there is a "device i/o error." there only are data downloaded to disk, but I do not have what has been saved.  The drive is new and I checked all the connections.  Any thoughts?

  We have to run a disk check to solve this problem, to do a disc check follow the steps below:

  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. at a command prompt, type the following command and press ENTER:

  CHKDSK X: /R

  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.

  3. press y when you are prompted to check the drive the next time the system restarts.

  4. close all applications and restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.

  You can also check out the link below:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  I hope this information is useful.

  Please let us know if you need further assistance.

• 40TL963 LED TV restarts when you use sky remote!

  Hello guys, my 40TL963 LED tv has started to close and restart when we use the sky remote. No matter what direct lead us!
  Its never done before. I got this TV for over 2 years now and it is just starting to happen.
  Any advice would be greatfull.
  Thank you

  Have you tried with a RESET of the TV already? (if you do not want to lose your strings, you must use the tool "ToshibaEdit" to avoid unnecessary work for sorting later, before you do this).

• Qosmio G30-153 stops and restarts when you try to run programs and games

  I bought inscribed in the computer of 22 days ago. After 4 days of work without problem the laptop started to plant a blue screen, mainly with the "MEMORY_MANAGEMENT" error

  Very often when you try to play a 3D game or using any program (internet browser, file manager or almost). As the Blue error screen is essential to the system, the computer restarts by itself, but even more often an (specific to the program or to a standard error window

  Windows "(nous sommes désolés, mais le programme doit mettre fin à cause de l'erreur...-une erreur principalement dans certains fichiers.dll dans le répertoire Windows) appears disabled to continue the work on the program until you restart manually."

  I restored the system once already - it did not help, I also downloaded the latest drivers, including upgrading the Bios.

  What can be wrong, I have no idea. Help, please...

  Hello

  Can you please tell us what games you have preinstalled and programs? Description of your problem is quite general and it is not possible to have any concrete indication that may be the problem. For some time, I have G30 and operating system runs very stable with standard applications such as Microsoft Office, Skype, Icq, MSN messenger and IE7 with LAN and WLAN connection.

  Up to now, I really didn't notice any problem. Because of this, I really want to know what programs you're using.

• DEXT does not vibrate when you receive a text

  Ive checked all the settings and Yes is checked so that it can vibrate when a message is received, but nothing happens. I also checked that works of vibration function and it seems to be good when you use something like the handcent app. Any suggestions on how to make it vibrate again using basic sms application or disable notifications for the application of sms by default when a sms is received would be greatly appreciated

  So even if you have "checked" box in your settings so that it can vibrate, now you must get in your 'message' folder, and once you're there and see the messages text, e-mail, facebook, or what you have, you then click on the "4-square" button on the phone and press "e-mail settings" then choose text or electronic mail messaging etc., then you will be able to choose notifications or vibrate and make sure that is checked.

  That was my problem, it has not been verified. could be the problem, if this isn't the case, return the phone and get a brand new!