Old files to PRINT are not open

Similar Questions

• I can't delete photos and other files. These are my own files and they are not open on the computer.

  Of recent, I am unable to delete files or photos.
  These are my own files.  They are not in use elsewhere on the computer.
  When I try to delete, the Microsoft 'circle work' rises and lasts forever.
  I can't get out of this mode.  Finally, after trying to escape from this command, the box comes in asking me if I really want to delete the file.
  How can I get my computer to normal operation removing?

  ......... Of recent, I am unable to delete files or photos.

  Consider a problem in recebt?

  If Yes, do you remember a "good date" when you could remove personal files?

  If Yes, please do a system restore.
  Choose this "good date" or before as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If system restore is not working or not a option, please do a check of the file system. It's to look for corrupt files. He will try to fix it if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• Cannot open this file because you are not allowed access to the location of the file

  I restored my compaq 510 professional vista, I get the "cannot open this file because you are not allowed access to the location of the file" whenever I tried to open a file or image

  I guess these are files from your previous installation. Take possession of them.

  A. check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click OK MS - MVP - Elephant Boy computers - don't panic!

• .exe files are not open; affected by the Windows Security Center of lazy virus

  Hello!

  As the title indicates, none of my executables will open his; on the contrary, when I click on an icon or similar function (as in the start menu), I'm inclined to the screen 'open with... ». I noticed that most often, if I run the program as administrator, it is likely to work without having to manually find the file - still a bit tedious however.

  I'm assuming that since I was recently hit by the virus which is a fake Windows Security Center, something my registry has also been hit (take into account the fact that I'm not savvy computer in the slightest). It happened on my user account initial and rather than take action on the right, then, I decided that I would use the other account that I had to install a program better anti-virus (Norton provided ISP) than the one I had been using (the two admin). At that point, I had finished all my activity moved to the new account and it worked very well until the virus had one possessing this account as well - delete on the first user account seemed to have deleted only the effects of my account but still affected everything I did after that. This time, I went and deleted all accounts and checked to ensure that it is not at all. After getting rid of the virus, it's the same thing: none of my .exe files will open without using the monitor "open with...". ». I'm not really sure what action to take from here, I have not done much to remedy the situation, and I'm going right through the screen of "open with...". "to get to what whatever - so any suggestions or help would be very appreciated.

  Keypoints:

  • .exe files are not open (However, in some cases, the "Run as Administrator" option overrides it)
  • recently hit with (deleted) and fake Windows Security Center virus ; That's when the .exe is no longer
  • is not much in terms of addressing this problem, do not know what to do with regard to the question of if my situation calls for something specific

  I tried to cover everything that seemed important to address; However, if there is more need information, let me know. I am about average in terms of computer navigation and therefore my understanding of what many of these commands, functions and files is a bit Basic.

  Thank you! :)

  Thanks for the very comprehensive post. Run the Doug Knox fix (that isn't a .exe that you can do this).

  http://www.dougknox.com/XP/file_assoc.htm

  Then follow the instructions to delete here:

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  MS - MVP - Elephant Boy computers - don't panic!

• ARW files are not open with ACR 9.1.1.  Color conversion/of DNG. You will need to upgrade to ACR 9.3.

  Hello world

  I bought a SONY camera that produces. ARW files.  They will not open in my Adobe Camera Raw 9.1.1.

  I use Photoshop CS6.

  I can't upgrade to Adobe Camera Raw 9.3 with CS6.

  I downloaded the DNG Converter and renders flat colors, dead.  I need bright colors.

  What must I do to get a version of Adobe Camera Raw 9.3?  I guess I have to upgrade Photoshop done

  this technically possible?

  Thanks for the help.

  Best always,

  James Whitlow Delano

  You can insert small images like screenshots directly into a forum post using the photo icon above where you type in the text:

  

  Dropbox is for sharing large files.

  Here are three screenshots...

  Native raw in C1:

  

  DNG in ACR:

  

  DNG in Mac preview:

  

  The only problem that you are experiencing is the overview of the DNG on the Mac is dull, but the images you create are ok?  I think that the DNG Converter is what creates the DNG preview, so I don't know how upgrading to a newer version ACR would change the DNG preview.

  What version of the converter DNG you used to create the the ARWs DNG?  You could try the last DNGC 9.6: http://www.adobe.com/downloads/updates/ so this isn't one you have used.

  Also made of Adobe and rendering of C1 would be different if it's not any problem.

• I have a new computer and try opening PDFs from other web sites. They are not open. What should I do to open these files?

  I have a new computer and try opening PDFs from other web sites. They are not open. What should I do to open these files?

  Thank you for your help, but I thought about it.  It was very simple & silly, something I would have thought from the outset. I had to add permissions to the pop-up blocker. Silly me had a "blonde moment"... no offense to blondes, just using the cliché. Laughing out loud!!

• I always get requests to update on my office home page. After the most recent, most of my quick start icons are badges of adobe. Except a few functions are not open. When I right click on Firefox (for example) it says 'READ' instead of 'OPEN' and t

  I always get requests to update on my office home page. After the most recent, most of my quick start icons are badges of adobe. Except a few functions are not open. When I right click on Firefox (for example) it says 'READ' rather than 'OPEN' and then displays the Adobe error box. The only other answer I received (from Ask.com) is that the update was a virus. I'm not computor savy and my pc is quite old. I just want to come an hour before this recent action, but I can't open Norton power eraser or even the ability of the computer to return to an earlier point in time to cancel the action. Each of these attempts of task appears Adobe error box. I am currently showing Adobe Reader X 10,0

  Hi deanrlh,

  I apologize for the inconvenience caused. Please follow the steps in the below article mentioned: Application, file icons change in Acrobat/Reader icon

  Thank you

  Abhishek

• Safari and App Store are not open. Recently updated to El Capitan 10.11.4

  Safari and App Store are not open. Safari icon will bounce back and not open. App Store comes up with "App Store close unexpectedly"

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• During a recent drive clean that I discovered I had 21745 KB of old files compressed - what are compressed old files?

  Original title: what are the old files Compresssed understand?

  During a recent drive clean that I discovered I had 21745 KB of old files compressed - what are compressed old files?

  AND is it OK to delete to free up disk space?

  Hi Janie,
  We need a bit more info here. What you saw and where (or how do you here). XP can compress old files when they were little used. These files must be stored somewhere, and I think that you have found where. Do not delete them. If you went on the cleaning disc in the properties of a hard disk, you see where you can disable this active or disabled, but turn it off takes more space because you don't compress these files more. It can take a long time to turn it off too much because the system must find every file, unzip it save it to the hard drive and do the following. If it runs out of disk space free of it, it will stop and make either but then your hard drive will be very close to full and your entire system will slow down (it takes a good amount of HD to 'play'.

  Looks like you need more disk space. Get another drive (expensive) or go to disk cleanup and try to compress the entire drive. It will take a lot of time, maybe hours or overnight depending on the working speed and the player. But it's free. Overnight is best. I think you can stop it (read the help on this). Do not turn It Off during the race. Bad move.

  Something not clear, go back and ask.

• Im getting attached in the form of PDF files, that I can not open

  Im making attached in the form of PDF files, which I can not open as they come out all mixed write a cross etc I don't know how open them I have 2007 microsoft office word and excellent, thanks

  Cannot display PDF files

  You must install a PDF reader to open and view PDF files.
  Are two of the most popular to install Acrobat Reader or Foxit Reader - so you will be able to view the PDF files.

  Both are free:
  http://get.Adobe.com/reader
  http://www.foxitsoftware.com/PDF/reader

• New PC with Windows XP, XP replacement. My PDF docs are not open

  New PC with Windows XP, XP replacement. My PDF docs are not open and I get the following messages: BE Adobe Reader could not open 'xxx.doc' because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded). OR Word now converts your PDF in an editable Word document. This can take some time. etc. Help please.

  You have Microsoft Word installed? If so, it seems that you need to change your file associations so that Word opens files .doc instead of the player. To do this, select a .doc file, right-click and choose "open with > choose default program", select MS Word and make sure that "Always use the selected program to open this type of file" is selected.

• Downloads are not open and asking to go in the trash. This is the message I get "is damaged and cannot be opened. You must move it to the trash. "What's happening?

  Downloads are not open and asking to go in the trash. This is the message I get "is damaged and cannot be opened. You must move it to the trash. "What's happening?

  Please set change the Gatekeeper

  Allow the applications downloaded from: Mac App Store and identified developers

• After you disable the new interface to tabs, all new documents are not open in a larger window

  Hello

  Yesterday I upgrade my Adobe 11.0.10 Adobe Acrobat Reader DC 15.010.20056 player. The tabs interface was pleasant enough, but there are still some limitations with this features, such as,.

  1 > no option to set no maximum. tabs in a single window,

  2 > tabs cannot organize, to be moved to a new window and several selected

  I want to disable the new interface to tabs via Preferences > General > open documents in the new tab in the same window (not checked), but after you turn off the new tabbed interface, all new documents open after the first document are not open in a maximized window, they always opened in a restored window.

  No matter what I do, it keeps - on the opening of the second new pdf in this one, restored windows are the things that I tried to overcome this.

  1 > right of the DC open Adobe Acrobat click in the task bar > Adobe Reader DC > right click > properties > run: enlarged - only the first document opened in maximized windows, documents later opened in the restored only, window that too seem to not work when I closed the last document in a restored window. Opening in the same window type is part of the windows operating system, it does all the time, "opens the entire application in the same way that they have been closed, either maximized/restored and the size of Windows too". Only the first one application window is open in this way, rest of the windows open is seems to be not supported by the operating system.

  2 > of this forum discussion https://forums.adobe.com/thread/435552?start=0 & tstart = 0 , I checked for the mentioned, registry keys

  HKEY_CURRENT_USER\SOFTWARE\Adobe\Acrobat Reader\DC\SDI

  the default value is - "bNullDocMaximized" = DWORD: 00000001 , "bMaximizeNextDocument" = DWORD: 00000001 and "bResizeOnOpen" = DWORD: 00000000

  Exchange only tried on the third button (the rest has been preset to required values) - "bResizeOnOpen" = dword: 00000001 - restart > no change > reset to its default value

  What to do now...?

  Thanks in advance

  Hi Gangatharran,

  Thank you for bringing this to our notice.

  We have recorded a bug for this and will share an update on the progress made in this thread.

  Kind regards
  Rave

• Forms are not opening after modernization in JRE6 Jinitiator to 11.

  Hello
  
  I just upgraded from jinitiator to JRE 1.6_37 following the note Metalink (deployment Sun JRE (Native plug-ins) for Windows customers in Oracle E-Business Suite 11i [290807.1 ID])
  
  However, the forms are not open now.
  
  Get error in Java Console below.
  
  java.lang.AbstractMethodError: oracle.forms.handler.TextFieldItem.getApplet () Loracle, forms, motor, hand;
  at oracle.forms.ui.VTextField.init (unknown Source)
  at oracle.forms.handler.UICommon.instantiate (unknown Source)
  at oracle.forms.handler.UICommon.onCreate (unknown Source)
  at oracle.forms.handler.TextFieldItem.onCreate (unknown Source)
  at oracle.forms.engine.Runform.onCreateHandler (unknown Source)
  at oracle.forms.engine.Runform.processMessage (unknown Source)
  at oracle.forms.engine.Runform.processSet (unknown Source)
  at oracle.forms.engine.Runform.onMessageReal (unknown Source)
  at oracle.forms.engine.Runform.sendDeferredMessages (unknown Source)
  at oracle.forms.engine.Runform.onMessage (unknown Source)
  at oracle.forms.engine.Runform.sendInitialMessage (unknown Source)
  at oracle.forms.engine.Runform.startRunform (unknown Source)
  at oracle.forms.engine.Main.createRunform (unknown Source)
  at oracle.forms.engine.Main.start (unknown Source)
  at sun.applet.AppletPanel.run (unknown Source)
  at java.lang.Thread.run (unknown Source)
  
  I upgraded to developer 6i patch_set 19.
  
  Please let me know if I missed something.
  
  Regrads,
  Sourabh

  Please see (how to overcome Stack Traces after Sun JRE Java and developer fixes Group 19 implementation? [ID] 1261565.1).

  Thank you
  Hussein

• Photoes printed are not equal to calibrated screen

  I have Photoshop CS3, calibrated screen (with x-rite eye - one display 2) all-in-one printer HP Photosmart 7283. The prints are not the same colors on my screen. How to solve this problem?

  I see that the i1 offers a luminance target setting. Not only that, he has a prior calibration function that allows to use the OSD of the monitor controls to get as close as possible to the target before the calibration. It is the best way to do it.

  Read the manual (you need to be in advanced mode). Then go to a target of 100-110 cd/m².

  Fact.

  Then go to the dialog box print in Photoshop. Under color management, click on 'Document '. It should say Adobe RGB.

  Choose "Photoshop manages color".

  Then, under "Profile of the printer" see if there is a that corresponds to the printer and the paper you are using. If not, this means that HP provides no profiles for this printer. In this case, you must use "Printer manages color" and the foregoing is questionable.

  If there is, take it, and then click 'Print settings' to take you to the printer driver. Here, clear color printer (ICM off or similar) management. Again choose the correct paper type so that the printer use the right amount of ink.

  That's all there is. I repeat myself just from this point. Basically, I said all this in the first post in the PS Windows forum.