old version asked if you wanted to start new session or continue when it crashes again version does not

Similar Questions

• Satellite A300-243 - can I choose the USB key you want to start?

  Hello
  I need an update for my laptop.

  That is the problem. I want to boot from a flash drive and I want to save my data on another USB HDD.
  All other laptops (even mini books) is an option that you can choose when you need 2 or more USB key when starting, that USB drive you want to start.

  When I put 2 key USB to PC and push button start options, see a single USB boot option. I want to see them all.

  Please help me get rid of this.
  Thank you.

  PC: A300-243
  BIOS: 1.90-3/20/2009

  Hello

  I think that's not possible.

  As far as I know there is that only one option is supported by the BIOS (last option called USB memory)
  You need to know that the different BIOS supports various functions and BIOS located on the A300 contains the option only to a USB key.

  So you can use just a USB key to start.

  Welcome them

• When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks.

  When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?

  original title: list of Network Service does not illuminate

  Hi SikDude,

  Please use the Forum of the community for Vista.

  Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.

  Please let us know if we can do something else.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do you want to start typing on sticky notes

  How do you want to start typing on sticky notes

  Here is the procedure: http://www.vistax64.com/tutorials/93264-sticky-notes.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What to do with downloaded Dell Bios / others when asked where you want to unpack these?

  Hey people, I know that this is not the place to ask the question, but I have trouble instead of Dell. And Microsoft has always gone through before.

  I went to Dell downloads looking for things, downloaded the new urgent BIOS and a few others, saved to the desktop, when you click on it it asks wherever you want to unpack these... where they first place and where they should be opened?  Thanks for your help, duckydog.

  Hello

  Unzip it in any folder of your choice.

  Now, look in that folder for the extracted files.

  If there is no txt file with instructions, double-click on the exe file.

  Carlos

• How can I stop acrobat pro/std 2015 (DC) to ask if you want whenever it launches the default application for PDF?

  I know there is a checkbox not to ask once again inside the application.  I'm trying to define for users when it installs so that they are not invited.  The Customization Wizard has options to set a default value or allow app decide.  I couldn't find reference to a registry entry for this anywhere.

  Hello Jackie,.

  In double thread, answered: How to automate Acrobat to setting is not asking if you want to be defined as the default value?

  Kind regards

  Tariq Dar.

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• I'm on a Mac and run creative cloud in my office and at home. When I'm at home whenever I run a creative program of clouds, such as InDesign or PhotoShop, he asks if I want to start a free free use for a certain period of time. Why is he asking me t

  I'm on a Mac and run creative cloud in my office and at home. When I'm at home whenever I run a creative program of clouds, such as InDesign or PhotoShop, he asks if I want to start a free free use for a certain period of time. Why he asked me this when I'm already a user, pay a subscription and said can I use my account on 2 machines?

  Hi Dwayne,

  Please see Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

  License FAQ: Can I install Creative Cloud on several computers?

  It could be useful!

  Rayyan

• I pay a monthly subscription and when I upgraded to inDesign CC 2015 he now asks if I want to start a trail. I can't work and I have a period. Help, please.

  I pay a monthly subscription and when I upgraded to inDesign CC 2015 he now asks if I want to start a trail. I can't work and I have a period. Help, please.

  Hi André,.

  Please check the help below document:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Kind regards

  Sheena

• I am user of Lightroom 5. Consider purchase version 6. Not happy with the subscription option, bcs, it looks like a year of use I will not be able to continue to use this version and you want me to pay more to continue to use LightRoom 6. Is this good? If

  I am user of Lightroom 5. Consider purchase version 6. Not happy with the subscription option, bcs, it looks like a year of use I will not be able to continue to use this version and you want me to pay more to continue to use LightRoom 6. Is this good? If so - I'll stay with Lightroom 5.

  You have two options to switch to Lightroom 6:

  1. Subscribe (including Photoshop CC 2014), or
  2. Buy the traditional way CS6 upgrade:

  Products

  Click buy

  I want to buy: menu, choose Update (instead of the default is Full)

  I own: Photoshop Lightroom 5.x

  Make your purchase.

• Have been CC because it came out; now when I sign on Adobe indicates that I am trial with so many days left.  No SN check reviews like that I usually get. Want to come back to the subscription version that the trial version does not provide

  Have been CC because it came out; now when I sign on Adobe indicates that I am trial with so many days left.  No SN check reviews like that I usually get. You want to revert to the version of subscription that the trial version does not include updates as new versions of camera raw.  How can I get this problem?

  Hello

  Please, you can consult the links below-

  • Connect and disconnect activate Cloud Creative applications
  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Evaluation mode showing creative cloud
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sandrine

• Trial version does not start,

  
  

  Trial version does not start,

  I see the logo but is the program not resonding, Installation 3 x
  still nothing.
  How can I run the program

  I work with Windows Vista 32-bit SP2,

  
  

  Best regards Jan-Paul Slinkert
  

  Right click > click 'run as administrator '.

• Why the Firefox 4 is not restore all the sessions that were open at the time? Before the update, I've been invited either ("SAVE AND QUIT") or even if she closed UNEXPECTEDLY (crushed), he AGAIN restored. New version does not offer "save and exit".

  Question
  Why don't Firefox4 restore any sessions that were open at the time? Before the update, I've been invited either ('SAVE AND QUIT'), or even if it closed UNEXPECTEDLY (crash etc) it STILL restored everything. New version does not offer "save and exit".

  Now, Firefox always stores the old session which you can access from the history menu by selecting "restore previous Session."

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»

  first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»   Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?

  Jürgen Freund

  First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?

  I found this YouTube video about the error 126 precisely to solve the problem.

  How to fix the ERROR 126 when you open programs OpenGL - YouTube

  The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)

  LoadLibrary failed with error 126: could not find the necessary

  Please let us know if it worked for you.

  Thank you.

  RTA

  Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.