On 74LS92D (division by twelve) is bad

Similar Questions

• Division by zero weird problem on HP 8200 Elite SFF

  Greetings,

  I posted my message here, it appears now that my problem is hardware specific.  My machine has the following specifications:
  
  HP Compaq 8200 Elite SFF
  Intel Core i5-2500 Duo @3.3 GHz processor
  8 GB memory

  Windows 7 x 64

  (I can provide more details if necessary)

  This has been me puzzled for more than a week now!

  We have an application where we lack in a division by zero. That request is deliberately built to raise exceptions in this case, with a call to the function _controlfp_s for edit masks on floating point exceptions.

  Now, when you run in a division by zero pretty much all of our machines, Visual Studio 2005 debugger breaks in the right place in our source files. However, on this machine, the location of the break is in every sense and seems to be unrelated to the real cause of the failure. So as a test, I built a simple win32 C program with just the following lines of code:

  int main (int argc, char * argv [])
  {
      float temp1, temp2, temp3;
      unsigned int control;
  
      _controlfp_s (& control, _EM_UNDERFLOW + _EM_INEXACT, _MCW_EM);
  
      Temp1 = 1.0;
      Temp2 = 0.0;
      Temp3 = temp1/temp2;
  
      return 0;
  }

  On all these 'good' machines, the code breaks when the temp3.  Among the other machines tested successfully, I had various hardware and operating systems, including Server 2008 R2, Windows XP x 32 and Windows 7 Pro x 64.  However, on this machine, the code stops at:

  C:\Program Files (x 86) \Microsoft Visual Studio 8\VC\crt\src\tidtable.c

  function:

  __set_flsgetvalue()

  In reviewing the records I have change the assembler code, everything seems fine until I hit the "ptsps" statement... then all records seem to be messed up (vs research as expected on a good machine). When comparing the stack on the good vs. bad, I also see entries of pile on the wrong machine, I don't see a good...

  Now... Here's what I did to solve problems:
  1. a disc image of the original disc HP on a hot spare and the original picture restored.
  2. only installed Visual Studio 2005 Pro - portion of C++.
  3 - tested above, code has always failed.

  4 - update all service packs Windows and tested above code.  Failed.

  5 - update all service packs, the Studio 2005 and tested above code. Failed.

  6 uninstalling all the bloatware and tested above code. Failed.

  7 - updating the BIOS and firmware and tested above code. Failed.

  8. install Visual Studio 2010 and tested above code. Failed.

  Then... I decided to take my spare disk image and install it on a similar, but a little older HP computer that we have, which has the following specifications:

  HP Compaq 8000 Elite SFF
  Intel Core Duo E8400 #3 GHz
  4 GB memory

  I went through the process of installation very well, even though she used the typewriter 8200 recovery partition.  On this machine, I simply installed the operating system and Visual Studio 2005 Pro - portion of C++.  No service packs not whatsoever (even if the Studio 2005 requires an update for 'vista') and the code worked as expected!

  So, that leaves me about almost everything but the material!  Also note that I tried to disable several processors and all optimization of the BIOS on the 8200, without success.
  
  I don't see anything else I can try... Please help!

  Wow!

  After the posting of this message to a friend... He found a document showing very similar symptoms on some of their CPUs from intel... I then found the exact document who applied to our specific processor (intel i5-2500) here:

  http://www.Intel.com/content/dam/www/public/us/en/documents/specification-updates/2nd-Gen-core-desktop-specification-update.PDF
  
  See Erratum BJ1

  This article describes pretty much exactly what I run into!  (Seriously), I never thought this would be a problem at THIS level!

• CVI division by zero defects

  Hello

  I use NI LabWindows CVI 2012.

  I have a piece very simple code:

  Double a = 4/0;

  This piece of code, I would like to return NaN, or at least do something that isn't to stop the execution on the compilation.  "Is there a way to turn NaN handling functionality or add an exception for the compiler that said: if division by zero is found, returns zero" or something?

  Here, any help would be greatly appreciated

  Hello

  It's probably doing an entire division and then by converting the result in duplicate.  Division by zero with an integer will crash your application.  I would try this:

  Double a = 4.0/0,0;

  If adding le.0 in the end tells the compiler that it is a floating point type, where division by zero is not as bad.  Moreover,.

  Double;

  a = NotANumber ();

  Can also do what you want.  If you want to check for NaN you can do something like this:

  If (IsNotANumber (a))

  a = 0.0;

• "Compile error. Unknown error. "or"Multiplexing gone bad"

  Hello people,

  When I try to export my video to 4 minutes (just a simple video in 1080 p: some only clips with a soundtrack, a few titles and, despite a sometimes stabilizer no effect), a "compilation error. Unknown error "or a"multiplexing has failed-error"occurs. For me, it seems that the program chooses just one of two errors, so there will be no export my file... I can't find a reason for these errors.

  I don't know how to get rid of the error division multiplexing (only export the video or audio), but as soon as I get rid of this error, the compilation error occurs, and I don't know how to get rid of that one... I advised Adobe page on the compile error, but none of the advice they gave worked for me...

  I decided to restart the editing of the video. This time that I exported every time after I was 30-second edition. It worked twice (so that total I 1 minute exported), but the third time the error reappears. I removed the third 30 seconds I edited (so I had left only 1 minute again), and I've tried if the first 30 sec still wanted to export. But this time, guess what, errors have come to the top and it wouldn't export... PE will not export the exact same files as it has exported before more!

  I think, something is wrong in the program itself, but tproblem could my computer als. Sometimes while editing a "Premiere Elements has stopped working - popup" appears and then I have no choice but to close the program (what is a sign of a bad work computer?). And tproblem that it could even be forced by me, something wrong...

  
  

  Anyone know anything about these errors and how to heal?

  
  

  Looking forward to your reply!

  
  

  By the way: English is not my mother tongue, so don't go and hate on my English please!
  

  02010 m

  Your English is very good. But we need more details. We understand the problem you have described.

  1. what version of Premiere Elements and on what operating system works - it?

  2. What are the properties including the extension of what you put on your project timeline?

  What have you (manually) or project (automatically) defined as a project preset to match the properties of your media source on the Timeline?

  3. What is your intended export - version 13/13.1 if, Publish + share/computer/and then what? And what you define as the pre-selection for export? You use the default settings of the selected preset, or customize the selected have been preset on his tab multiplexer tab button and advanced video, Audio tab? What are your settings tab multiplexer?

  4. have you developed the timeline to help - + cursor above the timeline and looked for irregularities in all tracks (used or others that you feel is not used).

  a. gaps in the timeline summary

  b. debris (remains) scattered around the content of the tracks

  placement of c. of video and/or audio transitions, titles

  I guess there is no marker menu timeline or movie Menus involved in all this. I guess correctly?

  Before we get to the point where we suggest program uninstall / free ccleaner Cross (parts regular and register), reinstall it with antivirus and firewall disabled, let us

  a. make sure that the structure of the timeline has no flaws inside

  b. determine if delete the parameter of the item first (Adobe Premiere elements Prefs) editor has an impact on one of the problems you described

  If Windows 7, 8 or 8.1 64-bit

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  Version number

  and in the version number the Adobe Premiere elements Prefs file folder that you delete... If that does not work, delete the record of the number of full version in which Adobe Premiere elements Prefs file exists. Be sure to work with folder Option show hidden files, folders and drives on.

  Please review and consider, and then we can try to put all the information together to find a solution consistent with the problems.

  Thank you.

  RTA

• Division with aggregate function

  Hi all
  I want to calculate the count (emp_id) count (dept_id) division.
  
  under query does not work. could someone please suggest
  
  Select (a / b) * 100 of ((select count (emp_id) in emp) a, b (select count (dept_id) of the Department))

  Resp. bad, no aliasing column

  select
   a/b*100
  from
   (select count(emp_id) a from emp)
  ,(select count(dept_id) b from dept)
  
  or even
  
  select
   count(*)/
   max((select count(*) from dept))
   *100
  from
  emp 
  

  You must not fear Division by as long as you're yure, there are all the lines in the Dept.

  otherwise use nullif

  select
   count(*)/
   nullif(max((select count(*) from dept where 1=2)),0)
   *100
  from
  emp
  

  Published by: chris227 on 12.12.2012 05:00

  Published by: chris227 on 12.12.2012 05:01

  Published by: chris227 on 12.12.2012 05:04
  confused

• ignore the divisions on the export or import

  I pull in the data of one cube to another. the source cube has many divisions. I made an effort to streamline the divisions (with the cube of the target) and in some cases, I don't need the parent. I want to remove (and have) these divisions sup my cube, but when I import I get messgae division is missing. the Division is a sparse dimension. How to solve? all divisions are set up as ever to share.
  
  
  for example
  
  Source
  
  Company 1
  SubCompany has
  SubCompany B
  SubCompany C
  Company2
  Company3
  SubCompany D
  SubCompany E
  
  Goal
  Company 1
  Company3
  SubCompany D
  SubCompany E

  Well, you could do a quick and dirty approach and:
  (1) make a copy of the database
  (2) remove the members you want the copy of outline (see #1 - do this in the real version and that the data is gone, gone, gone)
  (3) export level 0 newly emondee database
  (4) import and soak the relaxing drink of your choice (not what is coffee?)

  Otherwise, you may:
  (1) write a script to report (tab delimited output file) which excludes members
  (2) write a script to calc DATAEXPORT in a flat file or a table that exclude members
  (3) write a calc DATAEXPORT script to a table which includes members (although I don't know why, but hey, I list options), and then use SQL on how to exclude missing members
  (4) as RobertR3 suggested, create a partition replicates over the source to the target, excluding members that you do not want

  It is a stop? Is the set of data, large or small? Could get away you with the quick and dirty approach or do you to formalize for re-use?

  I guess I must part of the foregoing applies only to the BSO databases - you do not specify in your post, what are the technologies that you use.

  Oh yes, how did you get the data now? You could (groan) write a rule to load data that exclude unwanted members.<--I would="" caution="" against="" this="" if="" you="" are="" going="" to="" do="" this="" on="" a="" recurring="" basis.="" etl="" in="" a="" load="" rule="" is="" done,="" but="" it's="" a="" bad="">

  Kind regards

  Cameron Lackpour

  Published by: CL August 2, 2011 09:52

• Blue screen and bad RAM memory?

  My MBP 2011 early all just stopped working yesterday, it worked very well without any problem of performance for the last 5 years, and then suddenly a blue screen (of death) and it has problems starting.

  He will ring the Bell to start, display the bar loading and Apple, and then there will be a glitch on the big screen (horizontally) 1 inch above the Apple, after that, the fans speed up and all that I see a gray screen, not user interface.

  I zapped the PRAM/MSC and tried the unique memory sticks, I have no spare RAM on hand, but who will order soon.

  Tips to solve this problem?

  AHT says this - 65/4MEM/4000000000: 0x84f6f918

  Google says it is bad memory

  Here is the BSoD:

  

  I think you have a problem of memory, although if your MacBook Pro 15 or 17 inch, you should consider video issue as well now.

  http://www.Apple.com/support/MacBookPro-videoissues/

• External display on HDMI overheating my Mac and drains the battery badly

  Hey guys.

  I am using a MBP retina 2012 15 inches with an external monitor, a generic LCD 1080 p via HDMI without problems. And recently updated for Sierra.

  The question starts immediately when I plug it into the screen. The Macbook seems to overheat and run fans above 4000 rpm, which is very audible and boring. CPU and GPU temperatures go above 70 degrees C (normally they make 50 +). The battery holds for only 1.5 hours, generally works well for 4-5 hours.
  I tried killing all apps, followed a bad process in activity monitor, changing default resolution - nothing helps so far. The CPU is barely used by 10%, the memory pressure is fine.
  It's just that time when I plug the screen - Mac starts bad feeling. Never, the problem occurred on El Capitan. Maybe it's a GPU problem, but certainly caused by the OS.
  All the world had the same problem?

  Try resetting the NVRAM (hold down the command-option-P-R on startup).

  Also, try to restart in Mode without failure, then normally again.

  Finally, try logging into your account, sign in to a user account (or the guest account) and connect the external display. Same problem? If it works fine for a new account then it's something in your own account which is the cause - perhaps an element of connection or some other system changes induced by the operating system previous and who does not play nice with Sierra.

• Hello, I have an old macbook in bad condition, I have been editing on final cut pro (6.0.6) I need to know if I transfer my final cut information in the time line, he transferred to another computer?

  Hello, I have an old macbook in bad condition, I have been editing on final cut pro (6.0.6)

  If I buy a newer computer (macbook)... with a NEW version of final cut... If I transfer all my info from my hard drive to the new computer, and if this newer computer has a new version of final cut pro, it will always show my "timeline" I have... to remember all my files?

  If not... If I buy the same old version of final cut (6.0.6) and any transfer to another computer, my files will appear exactly as they did when I just changed my project?

  Thank you for your help, if you need more information to answer this question correctly, please ask.

  JO

  I asked that your post be moved to:

  Final Cut Pro X

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• Ejection force is bad?

  Force is a bad thinb disc? As it can cause problems and other things?

  Yes, this can damage information on a disk. Never eject a USB without using the Finder.

• Email from bad security. Cannot reset security questions. catch 22! Help.

  Email from bad security. Cannot reset security questions. catch 22! Help.

  Try to use the service of Julian inconu of Apple. If you cannot reset their through it, you'll have to ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (144529)

• Bad video card - last ditch effort

  Hello

  I'm 99% sure this is my video card that is causing this problem.

  Started a few days ago the screen filled with red pixels randomly, it could get worse over the next few minutes, and then the computer was completely insensitive - had stopped the clock and the mouse does not work yet.  I was able to ssh from my laptop, but cannot open applications and reboot via ssh wouldn't work, had to hard - reboot.  After having let it sit for awhile, it seemed better, I was hoping it was a stroke of luck.  Just right tonight (a few days since the accident of 1), he began acting again... bad.  I tried to run the Apple Hardware Test, he could not even done that - she's blocked (at the forefront in the screenshot), the mouse still worked, but even after half an hour, neither the time nor progress bar update.

  I have a NVIDIA Quadro graphics card, I'm not sure that is because apparently they only give information on the card itself.  I know that it was very expensive.  Tomorrow I'll try cleaning all the contacts on the map and the location of the motherboard.  Beyond that, all I can think to do is to buy a new video card.  Is it possible to fix a video card, or is it simply not feasible?  I can also try to put it in another location, to see if that solves (which would indicate that the problem is on the motherboard, rather than the map, but I doubt that will solve it).

  I removed the video card all together, the system is not is more locked up (so far), I am able to use via my MacBook screen sharing, and everything seems good function... which pretty much confirms for me, it's the video card (or slot) that's the problem.

  Does anyone have suggestions until I leave shell $500 on a new video card?  This expenditure could not have come at a worse time...

  I don't think I need anything too serious for a video card, I use Final Cut Pro.  I installed also just Apple Motion (literally, one day before all this crap started to happen, it seems strange that it could be related, but the time is quite a coincidence), and I join with two dual-link DVI ports.  I'd be curious to know if anyone has recommendations what video card to buy.

  Thanks in advance for any advice or thoughts.

  

  http://Lifehacker.com/5823227/save-dying-video-cards-with-a-quick-bake-in-the-OV en

• "Failed to read your feed. Result code bad http: 504 "

  Recently, I restarted my show. ' oh indeed ' and I'm unable to know certain things. I downloaded a brief show on talkshoe.com as if I had years back and when you go to the application of Podcast or Itunes. You can download the program as long as your capital. But it will not be displayed in the search.

  When I go on my podcasts connect page, it says "cannot play your stream. Result code bad http: 504 "

  I don't know what is the issue. my RSS URL is http://recordings.talkshoe.com/rss93020.xml

  Any ideas? Thank you.

  As you say, the episode seems when you subscribe in iTunes, the iTunes Store is not show it again. I can access the food OK in FireFox and Terminal; It validates in FeedValidator but CastFeedValidator cannot read the stream even after 3 minutes. It is possible that the store can catch up later (it is may be slow because food has not been updated for four years) but there is no way to know about it.

  All this points to your server not responding to certain types of application. When I tried in Podcasts connect he simply says that he was unable to read from the stream. You have a 504 error - this is a 'GateWay timeout '. This page says:

  "A (not necessarily a Web server) server acts as a gateway or proxy to meet the demand of the client (e.g. your Web browser) to access the requested URL." This server has not received a response in due course to an upstream server, what it accessible to treat your HTTP request.

  This means that the upstream server is down (not), rather than based on the upstream server and the gateway/proxy do not agree on the data exchange protocol.

  Correction of errors of 504 - General

  This problem is entirely due to the slow IP communication between the back-end computers, possibly with the Web server. Only people who have set up the network on the site that hosts the Web server can solve this problem. »

  Your next step is to take it up with the people who run your server.

• control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

  control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

  This will be only stifle creativity and prevent new addons are made.

  Said heavyoak

  control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

  This will be only stifle creativity and prevent new addons are made.

  How is that what does strike you?
  https://blog.Mozilla.org/addons/2015/08/21/the-future-of-developing-Firefox-Add-ons/

  «We are implementing a new extension API, called WebExtensions...» »

  The infrastructure of the current extensions will be gone and with it will have the advantage of current extensibility that Firefox had more Chrome and Opera. Kinda like the rating "fascism" for "communism".

  So at the end of next year we can be moaning about something much bigger than the current "signature" minor schism or "bump in the road."