On both my laptop (Win7 32-bit and 64-bit), Gmail in Firefox (since v.31) was prevented opening by Adblock Plus - what is the cause?

Similar Questions

• The screen of my laptop turns off when windows start. What is the cause and how can I fix it?

  Original title: computer failure

  the screen of my laptop turns off when windows start. What is the cause and how can I fix it. Thank you

  You have the screen image out to another monitor (one that is not plugged in fact). How you pass to the internal laptop display varies, but most cell phone companies make a combination of keys, such as Fn + F6 or something.  Looking for a symbol that looks like a monitor.  It is usually color coded and requires activation of a Fn key.

• During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it?

  During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit

  These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.

  If they are not ads, can you think anyway that they are related to the sites you visit?

  In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• What are the causes videos stop and start again during the transmission?

  What are the causes videos stop and start again during the transmission?

  Hello

  You can update the latest drivers for the video card and check.

  Also perform the clean boot and check:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Let us know the results.

• What are the causes my print spooler continues to operate, and quickly stop again when I restart it? Lexmark P4350 - Windows 7 Edition home premium

  What are the causes to stop working during printing and stop again shortly after I start my print spooler. I also find that my printer takes a long time to start printing after I clicked "Print". I use an all-in-one printer Lexmark P4350 on Windows 7 Home Premium.

  David

  Hi David,

  Thank you for the update.

  Use all the dependency services?

  The solution for slow printing is the print spooler reset.

  When we press the Windows key + R, a window opens. This is called the immediate window.

  I suggest you to uninstall and reinstall the printer drivers and check. Lexmark is not Windows 7 compatible drivers for the printer. So, you can download the drivers for Windows Vista and install in compatibility mode.

  Follow the steps to install in compatibility mode:
  a. right click on the driver installation file and select Properties and then tap or click on the compatibility tab.
  b. check the box run this program in compatibility mode .
  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  Reference:
  Video: Compatibility of software and hardware in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/software-and-hardware-compatibility-in-Windows-7

  Let us know if the problem persists.

• I have updated to DC (about a month) and cannot save my PDF files more.  What is the cause of the dialog box "Save as" do not open?

  I have updated to DC (about a month) and cannot save my PDF files more.  What is the cause of the dialog box "Save as" do not open?

  Hi mwebsterdps-sc,.

  Try this: -.

  The default "Save as" dialog Acrobat DC is different from the dialogue box you had in earlier versions of Acrobat, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Edit menu access-> Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  I would like to know if it works.

  Kind regards
  Nicos

• My laptop is running slow and I want to reset Firefox it's original setting. But I can't find the page to do so. Please notify.

  Hello

  On the help page for Firefox reset to original settings, he suggests going to the top of the page and clicking on Firefox (orange icon). Unfortunately, I can't find this header that would lead me to the help page for resetting.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• What is the cause of resolution color Vista reset 32-bit?

  In Windows Vista, I set the color resolution (in Control Panel) in the middle of 16-bit (from the highest 32-bit).

  I have two photo editing programs that only work with 16-bit resolution. Programs probably date from prior to Windows Vista.

  However, next time I re - start the laptop (a Sony VAIO), the resolution is reset to the 32 bit setting soon after starting.

  I tried to disable the Aero de Windows theme. However, after a reboot, the 16-bit resolution was still resets to
  the 32-bit parameter.

  What is the reason for the resolution of the color to change it back and how one does not this product?

  Reinstall the video card driver and set the resolution of the screen.

• During the installation of the ultimate upgrade, get "one or several components of the system could not be configured", then it restarts and pours me to premium.___How can I say what is the cause of the problem and fix it?

  I have the same problem as Laweaver.
  I have a HP pavillion Model # m9040n running the 32-bit version with service pack 1.
  My Vista Ultimate Upgrade drive is 32 bit and also has Service Pack 1 on it.
  I ran my system through the Microsoft Update and it is common.
  I ran Vista Advisor and he tells me that everything is good to go.
  I also ran my system through the center of update of HP and he is current.
  I tried the Ultimate Upgrade three times and got the same message twice.
  Of course, it waits until it reaches "end of the upgrade" before it fails.
  I turned all the extra wide including the firewall when I tried the upgrades
  My computer came with the home edition Premium already installed on it and I have the disks of backup for him if I have to do a repair on it.
  I have the same question though - how to tell what the cause of the problem and fix?
  Thank you
  Rich

  Hi Eaglesoar1,

  This problem occurs because some features of Windows Vista cannot be migrated to the upgraded version of Windows Vista.

  To resolve this issue, follow these steps:

  1. click on Start, type programs and features in the search box, and then click programs and features in the list programs.
  2. under tasks, click on turn Windows features on or OFF.
  If you are prompted for an administrator password, type the password. If you are prompted to confirm, click continue.
  3. Click to clear the check boxes for the following features:
  o Microsoft .NET Framework 3.0\XPS Viewer
  O remote differential compression
  O DFS replication service window
  4 upgrade Windows Vista to a more advanced version and then click to select the check boxes that you clicked to clear in step 3.

  For more information see the Microsoft kb article below.
  Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.
  http://support.Microsoft.com/kb/946078

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Have the upgrade to 5.0 and now when I load some sites I get javascript application say warning of failure - what is the problem

  Since upgrading to Firefox 5.0, some websites of returns an error message. JavaScript application is the title and the failure of the assertion message. I found some sites that where information is being downloaded that page hangs until the Refresh button is clicked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• What are the causes of some pages not to load on an individual PC when the site is OK and the other PC can access?

  Hello

  8.1 to win

  I recently made some changes to my internal network and all of a sudden attempts to access Bing give an error. My network is:

  

  When I connect either wired or wireless to wireless router I get to Bing.  When I connect to the router cable regular I get this error message:

  

  As I connect within seconds after each attempt, I don't think that the site has a problem.  For some reason, my new network connections have introduced some problem with the connection to Bing.  I use a new cisco wireless router.  When I put my old Linksys router in place, the problem does not occur.

  The problem only occurs with Bing.  I can connect to this forum very well, as well as MSDN and all other Microsoft forums.

  Yet once again, the problem is to the wired connection on the regular router.

  Additional info after writing this post: The problem is slightly different, so the title of the position was changed and this-more information can be found.

  Even more information after writing this post:  I installed Google Chrome to see if this is a problem in Internet Explorer.  No, the Chrome has a problem as well.

  I note that my ISP has given me a new IP address in a completely different set of addresses.  I only mention that in case it triggers a memory on connection issues.

  Hello

  I think I found the problem that was affecting my system.  It is not the solution for everyone, but if people are looking, it is at least a possibility.

  In my router, there is a place to manually enter the server DNS IPs.  I added specifically to my router the IP addresses of my ISP's DNS servers in the preferred and secondary IP addresses.  It will take positive time this solved my problems, but it seems to hold.

  Previously, I relied on the router to forward DNS queries to the next router in front of her which is effectively connected to the ISP (as shown in my picture).  But this does not seem to have been reliable, it seems so specifically direct the router to directly access servers DNS of the ISP have mitigated the damsels of DNS.

  Best regards

  Alan

• XP Home: What are the causes of 10% CPU usage and how to reduce this happening?

  Hello

  Quite often my PC experience this problem right after the start or in the middle of surfing. The system stops responding and I have to often press CTRL ALT DELETE and restart my PC. My RAM is 1.5 GB is sufficient for private users with multitasking very minimum at any time.

  I would appreciare if someone could advise me on what are the possible causes and how to minimize if happen.

  Thank you

  Low

  Hello

  Quite often my PC experience this problem right after the start or in the middle of surfing. The system stops responding and I have to often press CTRL ALT DELETE and restart my PC. My RAM is 1.5 GB is sufficient for private users with multitasking very minimum at any time.

  I would appreciare if someone could advise me on what are the possible causes and how to minimize if happen.

  Thank you

  Low

  UH... Do you mean by chance 100%? If this isn't the case, then there is no problem.
  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• Video download dark and darker. What is the cause?

  The problem occurs for DVDs and videos I find on the internet. I tried to increase the brightness by pressing 'fn and f8 '. Nothing helps so far.

  My operating system is Windows Vista.

  ASEFA

  "Thank you all.  I am very grateful for having taken the time to help solve my problem.  I want you to know I solved my problem since I posted my question.  I discovered that the position of the screen was the cause of my problem.  I always pushed the screen all the way.  By accident, do not be design, I've pulled back the screen while watching another video. All of a sudden the screen was bright as can be.  For the first time, I'm enjoying watching the video on my computer. "Thank you all, Asefa.

   

• What are the causes of "secondary drive 0 and 1 not found.

  my pc says "secondary drive 0 and 1 not found. What could be the cause.

  Hello

  Method 1:

  You can check the primary and secondary transmission in disk management and check if they are healthy.

  (a) open computer management by clicking the Start button, click Control Panel, clicking system and security, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, under storage, click disk management.

  (c) in respect of each hard drive, check the status.

  Method 2:

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  Step 1:

  You can check in the BIOS Basic Input Output System () if the drive is detected correctly.

  Note:  Perform the step after you restart the computer.

  Step 2:

  If the drive is detected correctly during the restart in the BIOS, update the chipset and BIOS drivers. Visit the manufacturer's Web site to do the same.