on change of value event I'm shooting adf Faces error message but its getting recorded during the click on save
Hi Experts,
JDEV 11.1.1.7.0
On valueChangeEvent I throw adfFacesErrorMessage but its economy during the click on save.
Because I can't do validation in my OE. So I can use validator instead of valuechange evnt. ? While it will not allow something to save.
autoSubmit = "true" validator = "#{backingBeanScope.myBean.checkValidation}" >
On valueChangeEvent I throw adfFacesErrorMessage but its economy during the click on save.
Message is just to what is expected.
So can I use instead of evnt valuechange validator.
Yes, you must use the validator to implement validation
Dario
Tags: Java
Similar Questions
-
Original title: System Event Notification Service does not connect.
Computer will not start. Error message states that Windows cannot read the Service Notification of system events.
Hi DACL.
· What is the full error you receive when you try to start the machine?
· You did it all change hardware or software on your machine before this problem?
You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
Repairs to the system of Windows recovery environment
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Is it possible to display the dynamic value in the ToolTip?
I tried:
this.assist.toolTip.value = this.rawValue; for a text field on 'ownership' MouseEnter
but it does not display the current raw value. It displays a previous raw value of the field...
I wrote 'YYYY', but is not displaying on the first mouseEnter event
When I show event mouseEnter for the 2nd time it gives good value.
Now, I changed the "BBBB" value but the first mouseEnter event it displays the value previous i.e. "YYYY."
I found the solution. I wrote the script ("this.assist.toolTip.value = this.rawValue ;") on 'property MouseEnter' but the need to write the script to the "Output" of the field event. ")
Thank you.
-
TextInput changes to the text during the click on
Hi all.
I have a text entry that contains the text 'name '. What I want to do, is when it is clicked it gets rid of this text. I can do it this way
< s:TextInput x = "10" y = "291" width = "265" textDecoration = "none" text = "Name" id = "txt_name" click = "" txt_name.text = "" fontStyle = "italic" / > "
Simply change the text value to "" on the click attribute.
However, this causes problems because if you click it once that he get rid of 'Name' and you type in something, if you clicked on it again, it would be to get rid of what you typed in.
If I'm on this simple function
protected function commentnametext (): void
{
If (txt_name2.text is "Name")
{
txt_name2. Text == ";
}
on the other
{ }
}< s:TextInput x = "10" y = "321" width = "265" textDecoration = "none" text = "Name" id = "txt_name2" click = "commentnametext ()" fontStyle = "italic" / > "
However, when I click on the textarea component it dosent seem to run the function, changing text dosent. No idea why its not working?
Your function is false
protected function commentnametext (): void
{
If (txt_name2.text is "Name")
{
txt_name2.text == "; -You must write here txt_name2.text = "; instead of 2 == writing only 1 =
}
on the other
{ }
}If this post answers your question or assistance, please mark it as such.
-
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
See this link:
http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/f2ae0ce4-237f-41c4-a2b6-8c7cf3739925 -
Error message: problem loading parameters and check the event log or ask the administrator
My wallpaper, the desktop icons and most of my documents are gone.
I have Vista Home Premium and a couple of days and I connected my desktop background was changed. Several desktop icons are missing, and a message came up saying there was a problem loading my settings and check the event log, or ask the administrator (me) for more details. All my "Favorites" were missing in the sidebar and my documents and recorded images folders are empty. Microsoft customer service tells me there is an error in my code for the identification of product (from the Windows Activation in systems and Maintenance) so I can't help out.
Any thoughts? Thank you!
Hello, G25
It is likely that your user profile is damaged. I would advise to create a new user account and test if you get any errors. If everything works as expected under the new user account, you can start to recover your account profile by following the steps on the following link: difficulty of a user profile is corrupted
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to set a value of outputText 0 during the click on the button cancel using javascript
Hi Experts,
JDEV version 12.1.3.0
I have an outputText at the foot of the column. And I have a button cancel on the top of the page. Then click on the button cancel. How can I set the outputText zero value.
Thank you
AR
Hello
Please check the labour code. Make clientComponent = "true" in the output text.
function customOutputValue (event) {}
var buttonComponent = event.getSource ();
Find the client component for the af:outputText 'greeting '.
var oComponent = buttonComponent.findComponent ("ot1");
Set the value of the outputText component
oComponent.setValue("0")
}
>
Thank you
Amey -
Hello
I am a teacher and I bought the membership for € 19.99, last September. Now, there is a new offer of €12,29 per month. Can I go and how do I do this?
Ann
You must get this cancelled order & buy the new CC with the price of your choice.
http://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Concerning
Baudier
-
Original title: network Drops randomly: the TCP/IP NetBIOS Helper service was successfully sent a stop control
The given reason was: 0 x 40030011 [OS: network connectivity (planned)]
I want a definitive answer for this! For some reason any that never seems to have been resolved. I'm on a Samsung qx410 computer J01 laptop with windows 7. The wireless adapter is an Intel Centrino Advanced - N 6250 AGN. I've tried making it so the adapters could not be disabled for reasons and basically all of the steps for this energy saving. I did everything with the drivers and software. In the event log, it has this event where he falls TCP/IP NetBIOS support apparently without reason? I then immediately lose my connection and it never seems to happen with the rhyme or reason. Any suggestions? It doesn't seem to be a hardware problem either. Where is microsoft on this topic? It seems to be a Windows 7 problem...Hello
1 have had any changes made on the computer before the show?
2. do you have a wired or wireless network connection?
3. do you get an error message? If Yes, what is the full and exact error message?If you use try Method 1 of the Wi - Fi connection.
Method 1:
Disable authentication IEEE 802. 1 X.
This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.To disable authentication IEEE 802. 1 X, follow these steps:
(a) click Start, type ncpa.cpl, and then press enter.
(b) with the right button of your wireless network connection and then click Properties.
(c) click the wireless networks tab.
(d) under preferred networks, click your wireless network, and then click Properties.
(e) click on the tab authentication, click keyar authentication to enable IEEE 802. 1 X for this network check box, and then click OK twice.Method 2:
Try the procedure described in the link to create a new network profile.
Create or modify network profiles
http://Windows.Microsoft.com/en-us/Windows7/create-or-modify-network-profilesMethod 3:
If the problem persists, you can try the procedure described in the link and check.Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 4:
If the problem persists, you can try to reset the Internet Protocol.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Method 5:
If still the issue remains, control whether or not the service is set to automatic.(a) click Start and type services.msc in the search box.
(b) search of the computer browser.
(c) series the service to automatic.Steps to set the auto services
a. Locate the service (computer browser)
b. right-click on the service
c. If the service is stopped , then Start the service
d. Select Properties
e. and in the Startup type , select Automatic.Hope this information is useful.
-
Facing problem in the CLICK event of the PANEL
Hello
Am facing a problem with the event click on the PANEL.
During the click event try to change the background color of this one.
Inside this group got many components such as DATAGRID, LIST etc, when I click on these components and alsoo bottom panel is changed.
I want the background of the Panel must be changed when I click PANEL only... not on its internal components...
How to do this... code used to change BG is give below...
tempPanel.addEventListener (MouseEvent.CLICK, changeBG);
public void changeBG(event:MouseEvent):void
{
this.styleName = "selectedPanel"; some CSS style
}Hey get...
event.currentTarget.drawFocus (true);
This will help to draw the border for the selected component...
-
I can't access my Advanced settings. I got it looking for the web site 192.168.1.1 for about an hour. Said he found but was awaiting a response. Then I tried access change password router and Wireless Protection and I get an error message: Exception has been thrown by the target of a call. Then, I'm sitting in the meantime that it to access the information. Nothing happens. Any ideas on what I should do?
Try the following steps:
(1) delete the cache of your browser.
(2) turn off the firewall on the computer.
(3) unplug the router for 10 seconds and then try again.
-
I have nothing else problems with my new system had in the past 2 months and have done two factory restores. I get the "your video driver has failed but recovered" several times a day, it progresses freezing and, sometimes, the old bue screen. I worked with the manufacturer and they took all original event logs before we did the restoration of 1. After a Microsoft Update, it was even worse that I did a second on 10/18. You went out with an update again and things seem to be OK until yesterday when it started happening again and again. So I went in the event logs to see what they said and I found the error message a week before the system arrived even at my doorstep. It seems whenever I did a factory restore it just keeps reloading the same problem! Since they send you the REAL DISKS any more there is no way own things off and really repair the enrire thing - if it's still possible for an average user. Other information: Journal name Microsoft Windows Kernel-EventTracing/Admin Source connected to kernel-EventTracing 2010-08-06 19:53:04 Evnet 3 category of task ID: Session-level: error keywords: Session OpCode: stop
There are several other error messages that appear on a regular basis, not to mention the display driver one - that is the most obvious to me. I saved the newspaper while they cannot get lost. You can see that this same error message when I did the last factory restore on 10/18 is still original and mistakes so I could look at just to be reinstalled again. My question is what is it, can it be repaired or do you need to strip ALL of this machine? And while you will never say so, shouldn't they have taken this BEFORE they sent this computer to a client?
Check with your PC vendor to determine if updated video drivers are available.Download and install if necessary. The video drivers are often buggy whenoriginally published, so what you see is not unusual. I hope it's aminor issue if you had not seen the papers you would have noticed."PC Nana" wrote in message news: c8aef944-7d5d-4888-8be5-839e71166366...> I had any other problems with my new system over the last 2 months> and have done two factory restores. I get the "your video driver has."> failed, but recovered" several times a day, it progresses to the gel and> sometimes the old screen bue. I worked with the manufacturer and> they took all the original event logs before we did the 1st> Restore. After a Microsoft Update, it got even worse then I did a second> 10/18. You went out with an update again and things seem to be OK> until yesterday when it started to happen again and again. So I went in> the event set myself to see what they said and I got the error message> a week before the system arrived even at my doorstep. It seems> whenever I did a factory restore is just keeps the same reload> problem! Since they send you the REAL DISKS any more there is no way> own offshore things and really repair the enrire thing - if that's even> possible from an average user. Other information: name of the journal> Microsoft-Windows-Kernel-EventTracing/Admin Source Kernel - EventTracing> Connected on 06/08/2010 19:53:04 Evnet 3 category of task ID: Session level:> Error keywords: Session OpCode: stop>> There are several other error messages that appear on a regular basis> Also the display one - driver is it more obvious to me. I have> saving the newspaper while they cannot get lost. You can see that> when I did the last factory restore on 10/18 this same error message is> here and still the original errors so I could just look in> reinstalled again. My question is what is it, can it be repaired or do> you must strip EVERYTHING of this machine? And while you'll never> say so much, shouldn't they have taken this BEFORE they sent this computer> to a customer?> -
How can I change a search error message generated automatically by JDeveloper?
I am using JDeveloper 11 g Release 1 (11.1.1.7.0). The image above is the error message when you enter a single attribute of "Between" search operator forms and click search.
I need to change this error message easier to use something like "must enter the quarters start and end. I have not been able to find a place to change this message all over JDeveloper... It would be very useful if you know how to change it. Thank you!
To customize error messages see ADF
http://Amit-ADF-work.blogspot.ca/2013/03/change-ADF-default-error-messages.html
http://docs.Oracle.com/CD/E24382_01/Web.1112/e16182/bcadvgen.htm#BABEFGCI
Binary: Customizing the Error Messages from the Business components
http://www.adftutorials.com/ADF-custom-error-handler-to-display-custom-message-to-user.html
http://www.baigzeeshan.com/2010/10/customizing-database-error-messages-in.html
-
When I try to change the PS CS6 workspace, I get the error message of passage: "Could not apply the workspace because of a program error." This happens when I try to change the default setting (Essentials) to any other predefined workspace. Does anyone have a solution for this problem?
If this fails, Menu Finder > go > go to folder
~/Library/preferences/Adobe Photoshop CS6Settings/workspaces (modified)
Move the change case of workspaces on the desktop, and then restart the Psalm
-
The Click event component button
Hello
I have a custom component which is a login form. This form of connection will be muilitple useful so I don't want to set the event click on the login button in the custom component, but I want to set the click event of the button in the component of the parent of the < application > for example I want to do in MXML that I don't want to not like in the default file < application >
Here is my custom component code is < ns1:LoginPanel id = "loginpanel1" / > at the bottom of the code below
Default Application file <?xml version="1.0" encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:ns1="*" borderStyle="inset" borderColor="#B7BABC" cornerRadius="15" horizontalAlign="center" verticalAlign="top" xmlns:grc="grc.*" xmlns:events="flash.events.*"> <mx:states> <mx:State name="MainApp"> <mx:RemoveChild target="{loginpanel1}"/> <mx:AddChild position="lastChild"> <mx:Label text="User Has Now Logged Inn" fontSize="30"/> </mx:AddChild> <mx:AddChild position="lastChild"> <mx:Label id="username"/> </mx:AddChild> <mx:AddChild position="lastChild"> <mx:Button label="Button" /> </mx:AddChild> <mx:RemoveChild target="{image1}"/> </mx:State> </mx:states> <mx:Style source="yflexskin.css" /> <mx:Image source="@Embed('images/engage_logo.png')" id="image1"/> <grc:Initialize id="remoteService"/> <ns1:LoginPanel id="loginpanel1" /> <<-- Here is the Custom Component I have a button called "loginButton" in the component how do I set the click event for the button from here using MXML </mx:Application>Thanks in advance for any help, it drives me crazy as a new to Flex, but come from a PHP back gorund. I must say I am very impressed with flex for RIA
Concerning
Chris
Hello
Manage your click event in the custom but component only to send an event to display the button click on it.
private function clickHandler (): void {}
dispatchEvent (new Event ('myClickEvent')):
}
]]>
[Event (name = "myClickEvent" type = "flash.events.Event")]
Using the
tag, you expose your custom event in mxml when you use your tag customComp in your main application. So in your main application you can manage here
In this way, you can write several event handlers for the different ways you want to when you instansiate your custom model.
Hope that helps
Andrew
Maybe you are looking for
-
Recently, I bought apple sports watch. I have it synced with my iphone 6splus. But I can not hear sounds when I get TEXT messages or call on either my iPhone or Apple Watch. Please let me know how to solve. Thank you.
-
Tecra 9000 - left speaker does not work
Hello the left speaker of my Toshiba Tecra 9000 no longer works.Strangely, the right one still works perfectly. As far as I can tell this is not a problem concerning the links between the speaker and the motherboard.I disassembled the laptop to check
-
Synchronization of Microsoft and Facebook accounts
OK so I have a new laptop in which I connect automatically in it with my Microsoft Account. When I saw that Skype was already an application downloaded on my laptop, I went to connect (my origional Skype account I put in place through facebook) and i
-
Watch cannot answer incoming calls.
-
I can't watch my films, black screen.
Since yesterday, after security update 2015-005 I can no longer see my purchased movies, black screen, no sound. iTunes 12.3.1.23 and OS X 10.10.5 yesterday everything was fine. What the * happens!