On DV7 Vista system restore

Similar Questions

• Vista system restore problem

  There is a version of system restore in Vista that doesn't seem to have the ability to allow me to choose a restore date. There is no radio button. How to restore to an earlier date without this feature?

  Hello

  It comes to the use of Vista system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Vista system restore question after malware attack

  Hello.  My wife's computer has been attacked by malware.  It all hid on the desktop and the start menu as well as all his personal files, has launched a large number of pop-up windows - up with fake error messages and then prompted to pay an unknown technical support source.  I used the Vista system restore to restore the system to a few days before the attack.  According to the instructions of Windows help, the system restore should not affect his personal files.  I was hoping that his files would be present again after the restore, but they are still missing.  The malware seems to have disappeared now.  Any suggestions on where its files can be located or what measures you need a professional to get back them?

  Hello

  You may also still have some malware installed.

  Read the information on the link provided (Section 19 and 21) on the way to "unmask" data and Start Menu as a few skins of Malware.

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Vista-recovery

  While you're there, it would be a good idea to follow in their footsteps of malware removal to ensure that your system is clean.

  This is a very good general Malware cleaning page there.

  See you soon.

• 64-bit Vista system restore won't work

  64 bit Vista system restore family premium stops and restarts as it works, but after it restarts, it always says it cannot restore. He does not say why it says just try a different restore point or leave. This problem has existed for a long time. I'm stumped, but then again, I'm not a real computer expert!
  Can someone help me?
  Thank you
  Bobby

  > This problem has existed for a long time.

  It may be too late now since you won't restore b 'old' enough to do the system restore.

  However, it is best to do Safe Mode system restore. You can give it a try.

  How to go in safe mode...
  Restart > immediately and repeatedly tapping the F8 key until you see a black white screen abd > use the up/down down arrow to select Safe Mode, Mode safe mode with networking, or Safe Mode with command prompt (if applicable)

  You should also try to do a check of the system files. It's to look for corrupt files. He will try to fix it if it is found.

  He may be able to solve the problem of lack of system restore.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• Stuck on black screen Vista system restore

  Hi my family Vista premium would not start normally so I tried to select a safe mode restore point. The chosen restoration was cut for more than 12 hours on a screen black now I didn't no what to do next please help?

  Hi LiLDrEaD,

  ·         You receive an error message?

  Follow the suggestions below for a possible solution:

   

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Perform system restore in Windows recovery environment.

  For more information, see the following article:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information helps.

• Affecting the 8 months ago on Vista system restore

  I want to do a Vista system restore but I don't get an option to choose a different restore another 10 days ago. I need to restore 8 months ago.  All articles, I've seen online, the screen gives the recommended Restore Points or choose a different Restore Point but I do not understand this 2nd option on my screen.  Can someone tell me how to restore more return just 10 days?

  If the Option is not available for more than 10 days, the previous restore points may have already been deleted.

  New RP created > old one removed.

  How to use the system restore:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• 32-bit Vista, System Restore and windows update are suspended.

  This problem started happening almost two months ago. When I turn off computer and windows update tells me that it is updated, I leave. Ive come back hours later to see that my computer never updated and turns off. Ive tried click on windows update to update while I was connected and it still crashes just forever. Today, I think I discovered perhaps the underlying problem. Finally, I got fed up and decided to do a system restore, after hours of research and try all kinds of solutions on these forums (none worked). So now he is suspended from the system restore. Suspicious to me that when the windows update crashes is on the screen where it says create restore point.

  What can I do?

  I do not want to download all that regcure, II _ I chercher search on google, seems tgtbt and I don't want to take the risk of harming my system.

  can anyone help please?

  Thank you very much.

  Hello

  You should go to the system manufacturer's website and get the latest network drivers wifi and card.

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each driver.

  Maybe the other pilots. software and updates to the BIOS, you can get there.

  Control Panel - Device Manager - double-click on a device and check the version.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  then also make - close all regular programs

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or you can copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  Rob - bicycle - Mark Twain said it is good.

• Receive the error code 0x800700b7 during the Vista system restore

  Get the error code 0x800700b7 during the restoration of the system.
  "System restore failed due to an unspecified error. Cannot create a file when that file already exists. (0x800700b7).

  I have a Dell laptop, Studio, running on Vista.  I just installed some Windows updates (ALWAYS a hassle!) and restarted the system.  Failed to start,

  I tried:
  (7 times) Startup Repair
  System Restore (at least 7 times - try them different restore points to restore the system, going back to mid-May
  Trying to reboot without doing anything

  The error message persists.   I can't boot the system in safe mode, so I'm not able to disable the antivirus software or go to start or anything else.  Windows does not start. Y at - it a fix for this error message?
  Help!

  I managed to fix it on my own over the weekend. In Safe Mode, disabled Norton and also downloaded a tool that Norton offers to help solve the problems of this kind.  The tool worked and my laptop works fine now. The update of Java was the problem - I don't allow anything not my automatic update system, but Java auto-updated anti-virus Norton was on.

• When I try to run the Vista system restore, I get the message that the restoration of the system is 'off', and there is no screen to turn it back on.

  The message said that "the system protection is turned off. "Turn it on again you can use system restore. The screen that is supposed to appear when I 'click' to enable system restore, does not appear and I get no options of system restore turn it on again. I don't know how he got off in the first place.

  Hi Rod,

  Let's start with a clean boot.

  Note that it is very important to "Hide all Microsoft Services" so that we do not destroy our restore points:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Best regards

  Matthew_Ha

• WIndows Vista system restore or/relocation question

  Currently, I'm working on my uncles computer. Its operating system is a 32-bit version of Windows Vista Home Premium. He would like a system restore to this topic, but there is no restore point when I tried. Is there a way to do it or just do a reinstall without the disc because it was preinstalled when he bought and delivered with no disc.

  Thank you

  Hello

  Here's how to use the system restore:

  http://www.windowsvistauserguide.com/system_restore.htm

  ________________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought it (which you should have like you do not have a disc)

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• interrupted vistas system restore and now it does not start at the top. The only way I can access advanced boot options is by pressing F8

  Then I tried to start Windows normally or in Mode safe and it does not work.

  None of these advanced startup options work effectively.

  When I turn on the laptop, the VAIO large appears and then Microsoft corporation and then a quick start of blue, then it tries to restart again again and again until I hit F8.

  I hope this can be repaired.  Thanks in advance for anyones help.

  Hello

  as none of the advanced startup options does work, try this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows Vista system restore problems

  Hello

  I picked up a nasty virus on my laptop and have all sorts of questions to get rid of him.

  I tried to perform a restore of the system in safe mode, but there is a major problem: there is no 'System Protection' tab on the box 'system properties '!

  How can I perform a system restore to remove a virus if it is not an option to perform the system restore?

  ARRRGGHH is side me crazy! Any advice would be greatly appreciated.

  See you soon

  Hello

  I picked up a nasty virus on my laptop and have all sorts of questions to get rid of him.

  I tried to perform a restore of the system in safe mode, but there is a major problem: there is no 'System Protection' tab on the box 'system properties '!

  How can I perform a system restore to remove a virus if it is not an option to perform the system restore?

  ARRRGGHH is side me crazy! Any advice would be greatly appreciated.

  See you soon

  Hey Geoff75

  malware normally stops you doing a restore of the system to protect themselves from you trying to remove

  Download updated and then analyze with the version free malwarebytes anti-malware in safe mode with networking

  http://www.Malwarebytes.org/MBAM.php

  Windows Vista

  Using the F8 method:

  1. reboot your computer.

  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.

  3. Select theMode safe mode with networking option using the arrow keys.

  4. pressenter on your keyboard to start mode without failure of Vista.

  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Vista goes into safe mode.

  6 do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• Portege M400 system hangs after Vista system restore

  My system crashed by doing a system restore. Now on startup it gives errors. When I boot from the CD, I go for the choice of the partition to install on and there is no partition, and it has this error:

  No hard drive found. Click on load a driver to provide for installing mass storage driver.

  I went to Toshiba and Microsoft for help. Or can direct me to the right solution. I can't find my recovery disk. I have just the windows installation disc. Is there an easy fix for this?

  * original title - cannot fine partition on Portege M400 during installation of Windows Vista Business 32 bit.*

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  For any problem, reinstall Vista, contact the manufacturer of your laptop.

  Here is the General info on reinstallation of Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Internet lost connection after Vista system restore

  Hello

  I've lost the ability to connect to the internet after system restore.  I tried a few different dates, but have the same problem.  I have tried many of the rememdies on the forums, but now luck. I havn't seen all that is exactly what I'm going thru, so I thought that I have that would give a shot.

  The connection is through a wireless router.  No problem before the system restore (other than a virus major that I have my daughter!).  I have another computer I'm on now has been and still works fine.  I tried the following...

  Rounter unplugged for 5 minutes
  reset the network adapter
  reinstalled drivers
  several things through "command window" (do not remember so)
  I tried several dates on the system restore

  I'm so frustrated.

  I would be grateful to anyone who helps!

  Thank you
  Dave

  Hello

  1 you get an error message when trying to connect to the Internet?
  2. what web browser do you use? Is - Internet Explorer or a different browser?
  3. do you have any security software installed on the computer?

  Troubleshooting Internet connection problems can be a challenge because there are so many possible causes. First of all, try this step and check the result.

  Open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.

  For more information on troubleshooting Internet connection problems, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Post back with the results, so that we can help you further.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.