E8350 is not detect computers Linux or NAS
I have a problem I want to block Internet my Linux and NAS computers on my network, but when I enter the access policy there only Windows computers. Why? Is there a problem with my config? Thank you very much for the help.
Try dynamic method using static PCs. can cause the ruoter to detect when you use static IP addresses. Detection is based on the use of Dynmatic IPs.
Tags: Linksys Routers
Similar Questions
-
ESXi 5.5 U1 does not detect to install local drives on HP DL380 G7 during
Hello
I am new to testing with vmware ESXi 5.5.
I did an instalation on the old server (DL380 G5), which was fine (I didn't add drivers to monitor health P400 control).
I'm now trying to intall ESXi 5.5. U1 on HP DL380 G7 with HP Smart Array P410i controller and attached is a HP StorageWorks NAS too.
I'm having a problem where my local drives are not detected during installation. NAS logical drives are detected.
The processor is E5620.
I first tried with the image not specified for HP, then also that I found good site HP, two ESX 5.5 U1. Same behavior.
I have still a start-up Win 2 K 3 R2 on the server and the array controller works fine, there are 3 SAS RAID1 + spare drives. A logical drive.
I updated FW P410i version 6.00 - 2. I ran 8.7 B PSP update which can be updated. Still no effect. I even tested it on its host (without updateing) 2nd future cluster, but it does the same thing.
I pressume I do something wrong maybe, because it detects old Array P400 controllers on other places, so should it also the new.
Can't really change the controller of Bay physically, as I do remotely.
Tips are welcome. If more information is needed, I'll be happy to add it.
Thank you
Karl
I don't know why... but the local drive was there, it was only listed as a remote control.
-
Satellite A300-1EI: Debian Linux does not detect DVD drive
Hello guys,.
I am trying to install Debian debian-40r5, but the first issue I encountered is that the DVD is not detected correctly and the system setup program is not loaded.
What happens is...1. start the program installation of Linux and its load.
2. I am invited for selections of region/language/KB. Then when debian tries to detect the drives, the dvd is not detected, and I am asked to load the driver manually. I tried to load the drivers in the installer, but without success.If anyone knows how to load the appropriate driver, please me advice.
Thanks in advance,
Ahmed OsamaThanks for the comments!
-
Homegroup not detected on computers
Hey there. I have a laptop and a desktop, both running Windows 7 Ultimate. The office is connected to a router and the laptop is connected wireless. However, even if they are on the same network, each computer can not detect a residential group, created by the other. I ran HomeGroup troubleshooter, but it did not help.
Could someone help me?
Take a look at the thread on this site and see if this helps you?
-
I received the error message to the Windows startup, that I need to replace my Hal.DLL file. I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...
Any help would be appreciated!
Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:
If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.
MS - MVP - Elephant Boy computers - don't panic!
-
WRT1900AC - external storage - not detected
I have an external storage drive is not detected. I can plug in a USB key on the router and have found things. When I plug my external hard drive into the router, I get the name of the drive but the router does not detect the size, and I can't access the drive. The only error I get is on the Media Server tab when I click on add a new folder:
/jnap/storage/ListSubdirectories -- Status: 200 OK Date: Thu, 11 Feb 2016 03:36:53 GMT Server: lighttpd/1.4.34 Connection: close Content-Length: 37 Content-Type: application/json; charset=utf-8
When I contacted Linksys support they said essentially that since my drive hard is not on their approved list, has nothing they will do to help understand why things don't work. I tried to plug my drive into a computer and everything works so I know the drive itself is good. It's just a matter of getting the router also detect the drive. The drive is formatted in NTFS.
The router says it's firmware is up to date 1.1.10.167514. I tried to reboot the router. The only thing I have not tried yet is a factory reset.
It solved!
The only way that I came to this solution was to use Linux. When I tried to plug the drive into a machine Windows the drive appears fine, but when I plugged the drive on a Linux machine and tried to mount it, I got a message saying that he could not climb because of some windows something or other. I think it happened, I had originally this drive in a windows-based Office Tower. I probably throught windows stopped but in reality it is only in hibernation. So the left Hibernate trace settings on the drive after I unplugged and tried to plug it into the router. The solution was to reconnect the drive on the windows machine, make a clean shutdown and then try to plug in the router. Once the router has seen the car and ability. I still had to tell the router to restart so that other computers can access the network share, but in the end, everything works fine.
I am just posting this in case someone else found this useful if they have they previously used on another computer in the car, do a clean shutdown before attempting to connect to the router.
-
Satellite L50-B-166: Webcam + microphone does not work under Linux
Hello
I'm under Linux Slackware 14.1 with kernel 4.11 on a Satellite L50-B-166.
Webcam and microphone are not detected by the system, and I can't find the firmware and the module for them.
Can someone help me?
Hello
I get the Webcam work properly in Fedora 22 core 4.0.6 (Incidentally, kernel 4.11 does not yet exist, so what kernel do you use )
I suggest therefore that you check the software for the Webcam settings is not simply disabled:F2 at the STATION
Go to advanced > system configuration
Make sure the Webcam is turned on.Tom BR
-
Satellite U500 - 1 DR series Notebook is not detected by the TOSHIBA site
Hey,.
My Toshiba Satellite U500 - 1DR Series notebook (Serial No. 1A058758R) is not detected by the automatic detection of TOSHIBA online system. When trying to get portable detected manually on the site, I stopped fingd the model (Satellite U500-1 DR) is listed in the list of available templates or models. I'm unable to download software/updates on the site.
Hello
If the work of autoetection doesn t you can find manually but not not using the name model but the model reference number. Your DR U500-1 has part number PSU9ME-xxxxx then please check under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp Toshiba download page and look for Satellite U500 with reference number or model number short PSU9ME.
Can find you it?
-
Tecra S3 - HDD was not detected during the intallation of win7
Hello
I have Tecra S3 PTS30E, serial No. is 17023153 H.
Now installed windows xp, I want to install Win7, but the HARD drive is not detected during installation. Windows xp works with this HARD drive.
Why this problem?
Please help me on this problem.
Hello
Tecra S3 supports RAID. Therefore, you need to install the RAID driver
When installing XP, you will need to press F6 to add the RAID driver.Here the driver I found on the page of the European driver Toshiba
[Driver RAID Tecra S3 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 195 & selSeries = 335 & selProduct = 596 & STAS hortMod = 431 & language = 13 & selOS = 10 & selType = 262 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 262 & page = 1 & ID = 43966 & OSI D = 10 & driverLanguage = 42]
-
Satellite M105-S322 - HDD does not detect
My laptop does not detect the hard drive. I press F2 to go into BIOS and it says hardrive No. I reinstalled the hard drive, but it still says the same thing. I have test the SATA hard drive on the desktop and it detects its.
What seems to be wrong? Help, please.
> I have test the SATA hard drive on the desktop and it detects its.
This looks like your HARD disk on the motherboard controller is faulty
But before that you exchange the motherboard but I would test another HARD drive maybe the HARD drive is faulty and will recognize only on certain computers or mothers.If a new drive HARD doesn t work too, your motherboard needs to be replaced.
-
Satellite Pro 6100: modem is not detected
Hello
Windows XP does not detect my modem.
Driver downloaded from the toshiba Web site, instaled it and still not found modem.
Any ideas?
Thank you
Hello
In my opinion, there is hardware failure. The best way is to contact the Service of your country partner. They allow to check the unit. For the moment, you can try using an external modem. I don't know that one of your friends can borrow you a.
Visit the Toshiba page under http://eu.computers.toshiba-europe.com. Click Download & support and you will find a link to the list of service partners.
Good bye
-
HP ENVY notebook: Headphones not detected on HP ENVY laptop
Headset/headphones not detected by the laptop when it is inserted into the audio jack.
tried several headphones which none were detected despite working on other devices.
USB headset is detected.
Have updated audio drivers using HP support Assistant and manually and not always no chance.
Had this problem because the laptop has arrived.
Any help much appreciated and I will try to provide all other necessary details.
Hey @ABONKERSCHICKEN,
Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!I understand that you are having problems with headphones not detected on HP Envy laptop. I'd be happy to help you with that.
To begin, I would like to follow this document: computers HP - solve the headphones and headset problems
Please hold me.
By pressing the Thumbs Up button below, you can always say thank you!
See you soon. -
Satellite A500-19W does not detect battery
Hello
I have a portable Satellite A500-19W which is 6 months old.
I bought this laptop while I was in Egypt and now I've moved (Dubai) UNITED Arab Emirates.
Lately my laptop started suddenly does not detect battery.
To remedy this that I have to remove the battery and clean the terminals then re - put the battery and turn it on and it's OK.
This happened twice this week and caused my data loss because the charger is disconnected (if the charger is connected, the laptop computer continue to work, but the battery indicator does not light up)
Now, my questions are the following
1 - is this problem under warranty?
2 - should I pay for anything when getting this laptop in service in Dubai noting that I bought in Egypt?
3. is there a cure for this problem without going through the service center?Thank you
1 / Yes. These questions should be covered by the warranty. Material is junk.
2 / the nearest service contact and ask, but I'm sure you don't have to pay for the repair. The two countries are countries in EMEA, and avoid any kind of problems.
3 / it is not much, you can do about it so please contact and explain the situation. They should check your laptop and find a reason why this happens.
Don t waste your time and contact the closest service. If you have need for addresses and phone numbers you can find on http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.
-
Ink cartridge missing or not detected
I feel as usual. I went to another sheet of printing, and it came on my printer. "Ink cartridge missing or not detected". Earlier today, I put in a new black ink cartridge. I took out and the color one, again no change. I connected the printer to the front and back, waited, plugged back without success.
I don't know what is the cause and I'm not very irritable with computers. I thought to change color ink, but he is looking fine on the papers that I printed. Help, please. The printer is older, but I take care of it and have never had a problem until now. It is a HP Photosmart C4240 all-in-one.
Thank you!
Nevermind I found the answer. I copy the information because it worked!
I found this video very useful.
The steps are also listed below
1. press the button and the button cancel at the same time.
2. you will be asked to enter a special code press the blue button, green button and the grey button (in that order, one after the other).
3. press the grey button until the Menu "information".
4. press the green button.
5. press on the gray button until you reach checksum to lock new data entry.
6. press the green button and wait a certain number to appear. It will be a random number and is not important beyond his generation.
7. press the button cancel three times to exit.
8. try the print message should be gone.
I hope this helps. I know that it's my YAY!
-
Hi all
I received recently 2 new HP desktop computers.
HP Elitedesk 800 G2 SFF
HP Elitedesk 800 G2 TWR
The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.
MDT 2010 to create a deployment on a USB hard disk drive.
This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.
Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.
The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.
Only the internal HD, external USB Flash Disk, DVD and network devices are detected.
Here's what I already checked or tried:
- Latest Version of the BIOS installed (2.05)
- UEFI Boot has been disabled. (not supported by our record of deployment)
- USB ports are enabled (front and rear).
- All types of USB devices are allowed in the BIOS
- The start command has been changed to start with USB devices.
- Legacy support is active and Secure Boot disabled
- Delete the keys to secure boot
- Reset secure by default startup keys
- This morning, I created a new disk deployment on a USB Flash drive and it works!
So, it seems that only Flash USB drives are detected.
I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.
Does anyone know a fix or a workaround for this problem?
Thanks in advance!
For those interested in the answer, here's the final results.
It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.
It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.
In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).
Thanks to the technical pre-sales team of HP who helped me with this!
Maybe you are looking for
-
How can I get pandora app on my Apple TV. It is not the new Apple tv
How can I get the application pandora on my apple tv? It's an old Apple TV and I can't find how to add an application.
-
Satellite P200 - random noise hiss/static problem
I have a Toshiba Satellite P200-1ee and it keeps hiss/static random noise if I'm not typing or computer? I'm just a novice, but it drives me crazy - I have not connected any external speakers or headphones someone could help me please? Thank you slat
-
Satellite M70: I can't connect to the WLan access point
I have several wireless laptops, all work fine - except my M70.I use Intel Proset, and he sees the access point, but says "unable to connect" when I try.The signal is high (2 meters distance). I tried with WEP, WPA and without security. I am absolute
-
I accidentally dragged the folder (?) of 'documents' off the coast of the left sidebar in the finder, a cloud popped up on the screen and then the missing documents. He had a few things in there and I can't recover, could help you?
-
Hello! Using the line profile, I got a curve representative the trend of pixel on an image, now I want to apply for this curve a polynomial for a more linear trend eliminating bothers them; but before that I have to select(interpolate?) some points o