on my end 2012 see random spontaneous stops

Starting in the last 2 months I have experienced unexpected stops on my iMac late 2012 with a disc fusion 10.11.5. It's like the Forum someone pulled the plug. To restart I need to reset the PMU. It can happen at any time even at rest.

What I tried:

Started in recovery mode and ran disk first aid with no problems found

reset the NVRAM, remnants of problems

Checked syslog - found no panic or anything obvious as to any cause, it says previous judgment cause 0

Now running in secure boot mode and you see is not the problem. But I want to run in normal mode but will get just the closure at any time. I've seen this widely debated question on this forum and elsewhere but can find no obvious solution.

Does anyone have suggestions on what to do next or how to diagnose or difficulty? This could be due to some software 3rd party components.

1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

Do not be put off by the complexity of these instructions. The procedure is easy to do right, but it is also easy to do wrong, so I had very detailed instructions. You make the tasks more complicated with the computer all the time.

2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

There are ways to back up a computer that is not fully functional. Ask if you need advice.

3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

4. here is a general summary of what you need to do, if you decide to go forward:

☞ Copy text from a particular web page (not this one) to the Clipboard.

☞ Paste into the window to another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Stick the results, which will be copied automatically, in a response on this page.

These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

7 load the linked web page (the site "Pastebin") in Safari. Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

8. start the Terminal application integrated in one of the following ways:

☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

    Test started

        Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

    The test results are on the Clipboard.

    Please close this window.

The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

Tags: Mac

Similar Questions

end 2012 iMac 27-inch randomly turns off during simple tasks

HI I end 2012 27 inch I Mac

while I do tasks such as there is a time when I was waiting for a word on Microsoft word 2016 document while listening to a YouTube video, my Mac goes off randomly. If I move the mouse that nothing happens, or if I click on the keyboard, even when I click on the button at the back of the mac market. To remedy this, I have to cut the plug from the socket and wait a few minutes, then switch it on again, then without me touching the power button on the back of the Mac turns. I have a usb hub that has a constantly on the Mac is on the head, and when the problem arises that the led is not on so I'm sure that the Mac is turned off completely without power. The power offs get more frequent, and at first I thought it was because it was when I was using Windows in virtual box, but I deleted the virtual machine and the problem still happens.

I think it has something to do with the power supply becpause I have the iMac connected to an extension cord about 7 meters which is plugged into the wall outlet

the extension has only two taken end that which I use for the Mac and one for my printer (brother j132w) but I don't think that the printer has nothing to do with it, because the problem happens even just the I Mac is connected to the extension lead.

I live the. U.K., so I have the uk plug if it has a meaning

Help, please

Thank you

If please send a report to EtreCheck of your system and post it in your reply to this message. If you want to learn what is EtreCheck, just click on the link.

iMac 27 inch end 2012 unbootable

This morning when I was working on my iMac 27-inch end 2012, suddenly he stops and does not start.

After pressing the power button there is no sound and no display. NOTHING. BLACK SCREEN who knows what may be wrong...

Hi Heinz, bad luck. This Apple support can help.

If your Mac will not turn on - Apple Support

Since you have no power, much of it does not apply. Read the subtopic, "power problems."

iMac (21.5 inch) end 2012 hangs constantly

Hi guys,.

I hope someone can help me with this problem.

I have a big problem with my iMac (21.5 inch) end 2012. It crashes constantly, I can't even watch video YouTube 360 more or look at picture with low preview 500 KB.

My iMac freezes, crashes, won't start after 3 - 4 times or more. I did a hardware test, test etc. software but it says there is no problem with my iMac at all, everything works fine, he said. I have also reset and re - install my iMac 3 times, nothing is. I also sent my iMac to an Apple for 3 times (Amac, Netherlands) dealer, they also said that we cannot find something and your iMac works fine. My Mac blocks, so that may be the problem?

I have 850 GB of free space on 1.2 TB and if I look for if there is no problem with the serial number, I can't find anything. I have always updated my Mac to the latest version, but it seems it hangs longer after updates each time.

I have this problem every hour, but I'm not this technique that I can understand it.

Anonymous UUID: 0404F0D1-1356-5952-E0E7-7947832E7544

Thu Jan 10 11:45:37 2015

Panic report *.

panic (cpu 3 0xffffff7fa3dc2943 appellant): NVRM [0 / 1:0:0]: error reading 0x0010a488: CFG 0xffffffff, 0xffffffff, 0xffffffff, BAR0 0x103e00000 0xffffff91325b7000 0x0e7180a2, D0, P3/4

Backtrace (CPU 3), frame: return address

0xffffff912f5eb220: 0xffffff80230e5307

0xffffff912f5eb2a0: 0xffffff7fa3dc2943

0xffffff912f5eb360: 0xffffff7fa3e901d5

0xffffff912f5eb3a0: 0xffffff7fa40dfee4

0xffffff912f5eb3d0: 0xffffff7fa3f01042

0xffffff912f5eb430: 0xffffff7fa409b1c8

0xffffff912f5eb470: 0xffffff7fa409e126

0xffffff912f5eb4e0: 0xffffff7fa409e06a

0xffffff912f5eb550: 0xffffff7fa4093f19

0xffffff912f5eb5c0: 0xffffff7fa3e7c9c1

0xffffff912f5eb620: 0xffffff7fa3e7d1cc

0xffffff912f5eb630: 0xffffff7fa3dac8b8

0xffffff912f5eb670: 0xffffff7fa3dabb99

0xffffff912f5eb710: 0xffffff7fa40e3adf

0xffffff912f5eb740: 0xffffff7fa40e2d91

0xffffff912f5eb850: 0xffffff7fa3dc65ff

0xffffff912f5eba50: 0xffffff7fa3dc68aa

0xffffff912f5ebaf0: 0xffffff7fa3d6d092

0xffffff912f5ebb70: 0xffffff7fa3d6c8c1

0xffffff912f5ebbd0: 0xffffff7fa3d6e22a

0xffffff912f5ebc10: 0xffffff7fa3d20535

0xffffff912f5ebca0: 0xffffff7fa3d1814b

0xffffff912f5ebcd0: 0xffffff7fa3d6ef38

0xffffff912f5ebd20: 0xffffff8023697241

0xffffff912f5ebd70: 0xffffff80236e0a69

0xffffff912f5ebde0: 0xffffff80231a02a1

0xffffff912f5ebe30: 0xffffff80230e9aa3

0xffffff912f5ebe60: 0xffffff80230cd478

0xffffff912f5ebea0: 0xffffff80230dcfd5

0xffffff912f5ebf10: 0xffffff80231c13aa

0xffffff912f5ebfb0: 0xffffff80231f4b36

Extensions of core in backtrace:

(2.4.1) com.apple.iokit.IOGraphicsFamily [48AC8EA9-BD3C-3FDC-908D-09850215AA32] @0 xffffff7fa3d0e000-> 0xffffff7fa3d48fff

dependency: com.apple.iokit.IOPCIFamily (2.9) [8E5F549E-0055-3C0E-93F8-E872A048E31B] @ 7fa392d000 0xffffff

com.apple.nvidia.driver.NVDAResman (10.0.6) [E177026A-B6F5-30AB-BF87-8ADC4D102278] @0xffffff7fa3d6b000-> 0xffffff7fa3fedfff

dependency: com.apple.iokit.IOPCIFamily (2.9) [8E5F549E-0055-3C0E-93F8-E872A048E31B] @ 7fa392d000 0xffffff

dependency: ffff7fa3d55000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [814A7F4B-03EF-384A-B205-9840F0594421]

dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [48AC8EA9-BD3C-3FDC-908D-09850215AA32] @0 xffffff7fa3d0e000

dependency: com.apple.AppleGraphicsDeviceControl (3.11.33b1) [2BA0BB49-9DFD-3851-984F-8816AE3 A1964]@0xffffff7fa3d65000

com.apple.nvidia.driver.NVDAGK100Hal (10.0.6) [8CE64377-C546-33CF-B016-B343A4F7E2 0E]@0xffffff7fa3ff9000-> 0xffffff7fa41a8fff

dependency: com.apple.nvidia.driver.NVDAResman (10.0.6) [E177026A-B6F5-30AB-BF87-8ADC4D102278] @0xffffff7fa3d6b000

dependency: com.apple.iokit.IOPCIFamily (2.9) [8E5F549E-0055-3C0E-93F8-E872A048E31B] @ 7fa392d000 0xffffff

Corresponding to the current thread BSD process name: WindowServer

Mac OS version:

15B 42

Kernel version:

Darwin Kernel Version 15.0.0: Sat Sep 19 15:53:46 PDT 2015; root:XNU-3247.10.11~1/RELEASE_X86_64

Kernel UUID: AB5FC1B4-12E7-311E-8E6F-9023985D8C1D

Slide kernel: 0x0000000022e00000

Text of core base: 0xffffff8023000000

Text __HIB base: 0xffffff8022f00000

Name of system model: iMac13, 1 (Mac-00BE6ED71E35EB86)

Availability of the system in nanoseconds: 8275087766

last load kext to 7897525862: com.apple.filesystems.autofs 3.0 (addr 0xffffff7fa582a000 size 45056)

kexts responsible:

com Apple.filesystems.autofs 3.0

com.apple.driver.ApplePlatformEnabler 2.5.1d0

com.apple.driver.AGPM 110.20.21

com.apple.driver.X86PlatformShim 1.0.0

com.apple.driver.AppleMikeyHIDDriver 124

com.apple.driver.AppleOSXWatchdog 1

com.apple.driver.AppleHDAHardwareConfigDriver 272.50.31

com.apple.driver.AppleHDA 272.50.31

com.apple.driver.AppleUpstreamUserClient 3.6.1

com.apple.driver.AppleMikeyDriver 272.50.31

com Apple.Driver.pmtelemetry 1

com.apple.iokit.IOUserEthernet 1.0.1

com.apple.GeForce 10.0.6

com.apple.driver.AppleMuxControl 3.11.33b1

com.apple.iokit.IOBluetoothSerialManager 4.4.2f1

com.apple.Dont_Steal_Mac_OS_X 7.0.0

com.apple.driver.AppleIntelHD4000Graphics 10.1.0

com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

com.apple.driver.AppleThunderboltIP 3.0.8

com.apple.driver.AppleBacklight 170.8.1

com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.2f1

com.apple.driver.AppleHV 1

com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

com.apple.nvidia.NVDAStartup 10.0.6

com.apple.driver.AudioAUUC 1.70

com.apple.driver.AppleSMCLMU 208

com.apple.driver.AppleLPC 3.1

com.apple.driver.AppleFIVRDriver 4.1.0

com.apple.driver.AppleMCCSControl 1.2.13

com.apple.driver.AppleIntelFramebufferCapri 10.1.0

com.apple.iokit.SCSITaskUserClient 3.7.7

com.apple.driver.AppleUSBODD 3.7.1

com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

com.apple.iokit.IOBluetoothUSBDFU 4.4.2f1

com.apple.driver.AppleUSBDisplays 378

com.apple.driver.CoreStorageFsck 517

com.apple.driver.AppleFileSystemDriver 3.0.1

com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

com.apple.BootCache 37

com.apple.iokit.IOAHCIBlockStorage 2.8.0

com.apple.driver.AppleFWOHCI 5.5.2

com.apple.driver.AirPort.Brcm4331 800.20.24

com.apple.driver.AirPort.Brcm4360 1010.14.1a4

com.apple.driver.AppleSDXC 1.7.0

com.apple.iokit.AppleBCM5701Ethernet 10.1.11

com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

3.1.5 com.apple.driver.AppleAHCIPort

com.apple.driver.AppleACPIButtons 4.0

com.apple.driver.AppleRTC 2.0

com.apple.driver.AppleHPET 1.8

com.apple.driver.AppleSMBIOS 2.1

com.apple.driver.AppleACPIEC 4.0

com.apple.driver.AppleAPIC 1.7

com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

com Apple.NKE.applicationfirewall 163

com Apple.Security.Quarantine 3

com.apple.security.TMSafetyNet 8

com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

com Apple.kext.Triggers 1.0

com.apple.driver.DspFuncLib 272.50.31

com.apple.kext.OSvKernDSPLib 525

com.apple.nvidia.driver.NVDAGK100Hal 10.0.6

com.apple.nvidia.driver.NVDAResman 10.0.6

com.apple.driver.AppleGraphicsControl 3.11.33b1

com.apple.iokit.IOSerialFamily 11

com.apple.driver.CoreCaptureResponder 1

com.apple.iokit.IOSurface 108.0.1

com.apple.driver.IOPlatformPluginLegacy 1.0.0

com.apple.driver.AppleBacklightExpert 1.1.0

com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.2f1

com.apple.iokit.IOBluetoothFamily 4.4.2f1

com.apple.driver.AppleHDAController 272.50.31

com.apple.iokit.IOHDAFamily 272.50.31

com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

com.apple.iokit.IONDRVSupport 2.4.1

com.apple.iokit.IOFireWireIP 2.2.6

com.apple.driver.AppleSMBusPCI 1.0.14d1

com.apple.driver.X86PlatformPlugin 1.0.0

com.apple.driver.IOPlatformPluginFamily 6.0.0d7

com.apple.driver.AppleThunderboltEDMSink 4.1.1

com.apple.driver.AppleSMC 3.1.9

com.apple.driver.AppleSMBusController 1.0.14d1

com.apple.iokit.IOAcceleratorFamily2 203.10

com.apple.AppleGraphicsDeviceControl 3.11.33b1

com.apple.iokit.IOGraphicsFamily 2.4.1

com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

com.apple.iokit.IOBDStorageFamily 1.8

com.apple.iokit.IODVDStorageFamily 1.8

com.apple.iokit.IOCDStorageFamily 1.8

com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

com.apple.iokit.IOUSBMassStorageClass 4.0.0

com.apple.iokit.IOUSBMassStorageDriver 1.0.0

com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

com.apple.iokit.IOUSBHIDDriver 900.4.1

com.apple.iokit.IOUSBHIDDriverPM 900.4.1

com.apple.driver.AppleUSBComposite 900.4.1

com.apple.driver.AppleUSBAudio 301.52

com.apple.iokit.IOAudioFamily 204,1

com.apple.vecLib.kext 1.2.0

com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

com.apple.driver.AppleThunderboltDPInAdapter 4.1.2

com.apple.driver.AppleThunderboltDPOutAdapter 4.1.2

com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.2

com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

com.apple.driver.CoreStorage 517

com.apple.driver.usb.AppleUSBHub 1.0.1

com.apple.driver.AppleXsanScheme 3

4.5.8 com.apple.iokit.IOFireWireFamily

com.apple.driver.AppleThunderboltNHI 4.0.4

com.apple.iokit.IOThunderboltFamily 5.0.6

1101.24 com.apple.iokit.IO80211Family

com Apple.Driver.corecapture 1.0.4

com.apple.driver.AppleUSBMergeNub 900.4.1

com.apple.iokit.IOEthernetAVBController 1.0.3b3

com.apple.driver.mDNSOffloadUserClient 1.0.1b8

com.apple.iokit.IONetworkingFamily 3.2

com.apple.driver.usb.AppleUSBEHCI 1.0.1

com.apple.iokit.IOAHCIFamily 2.8.0

com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

com.apple.driver.usb.AppleUSBXHCI 1.0.1

com.apple.iokit.IOUSBFamily 900.4.1

com.apple.iokit.IOUSBHostFamily 1.0.1

com.apple.driver.AppleUSBHostMergeProperties 1.0.1

com.apple.driver.AppleEFINVRAM 2.0

com.apple.driver.AppleEFIRuntime 2.0

com.apple.iokit.IOHIDFamily 2.0.0

com.apple.iokit.IOSMBusFamily 1.1

com Apple.Security.sandbox 300.0

com.apple.kext.AppleMatch 1.0.0d1

com.apple.driver.AppleKeyStore 2

com.apple.driver.AppleMobileFileIntegrity 1.0.5

com.apple.driver.AppleCredentialManager 1.0

com.apple.driver.DiskImages 415

com.apple.iokit.IOStorageFamily 2.1

com.apple.iokit.IOReportFamily 31

com.apple.driver.AppleFDEKeyStore 28.30

com.apple.driver.AppleACPIPlatform 4.0

com.apple.iokit.IOPCIFamily 2.9

com.apple.iokit.IOACPIFamily 1.4

com.apple.kec.Libm 1

com Apple.KEC.pthread 1

com Apple.KEC.corecrypto 1.0

I hope someone can help me, give me an opinion or know what may be the problem.

Thank you!

Bruijn Olav

I suspect that your graphics card is a failure, a competent service provider should be able to diagnose the problem. Have you tried to boot mode safe? Everything will be slower and some things don't work at all, but Safe Mode disables advanced graphics, if the panic stops in the safe is another indicator that the GPU is maybe defective. Try safe mode if your Mac does not commissioning - Apple Support

Outlook Express wants to compact my messages whenever it ends. How do I stop this?

Outlook Express wants to compact my messages whenever it ends. How do I stop this?

I advise all to first understand what is happening and then decide how best to treat for your environment:

If you are talking about a message that says:

To free up disk space, Outlook Express can compact messages. This can take up to a few minutes.

Automatic compaction of Outlook Express files was introduced in Service Pack 2.

If you are using Windows XP, there is a registry value called:

Compact Check Count

It is located in the registry for a key that looks like this:

\Software\Microsoft\Outlook Express\5.0 HKCU\Identities\ {51909A0B-63EE-4EB3-A9A2-7CFA23C1ADCF}

Whenever you leave OE (not when you open it), the value of the counter increases by an increment (increment is not a verb so you can't increment something and a counter cannot be incremented). When the value of the counter gets to 101, the next time you close OE asked you to compress messages.

There are two things that will increase the value of the counter.

Exit from Outlook Express will increase the value of the counter.

If you have Windows Desktop Search installed, it will increase the counter every time it works which is usually at least at each reboot.

If you use Outlook Express, and Windows Desktop Search, the counter will be increased more frequently — whenever you close Outlook Express and whenever Windows Desktop Search launches when you restart.

Even if you are not using Outlook Express and only using Windows Desktop Search, which will further increase the count, so when the counter gets to 100, Windows Desktop Search will prompt you to compress messages during the next reboot.

This is because Windows Desktop Search is configured by default to search for the Outlook Express database if you are using OE or not.

No matter how the counter is increased, if you use at least one of these two, eventually you will see this message appear sooner or later. But you can stop it when you understand.

You can compress data when prompted (which resets the counter to 0).

You can change the registry and reset the counter to hand to buy some time until you see the message again.

If you do not use Outlook Express and only using Windows Desktop Search you can tell Windows Desktop Search to never watch the Outlook Express database (or uninstall the Windows Desktop Search if you do not use).

To remove the Option of Windows Desktop Search index to the database of Outlook Express follow these steps:

Click Start, settings, Control Panel, Indexing Options, change, clear the box Outlook Express, OK, OK, to save the settings and reboot the system so that the changes will be effective.

After the Outlook Express recommended for use (which would include the normal database maintenance) will prevent you from seeing the message in the first place. If you see the message that you might want to reconsider how you use Outlook Express and the risks of data store corruption of occasional or misuse (risk behaviours).

Most people using Outlook Express or Windows Desktop Search agree just remove the indexing Option in Windows Desktop Search and keep the meter that is built into Outlook Express so that they will remind to compact the database from time to time. If you had to sort of do not maintain your Outlook Express files, it would be risky for your messages.

Here is an article with some other information:

http://www.oehelp.com/OETips.aspx#2

Can I connect a DVI - DL my end 2012 Mac Mini input?

Hi all...

I have a question... I have a Late 2012 Mac Mini and I just bought a new BenQ XL2411Z 24 "play. It supports the 1ms and up to 144 Hz. I know that my Mac Mini (end 2012) has an Intel 4000 1.5 GB graphics installed in it. Can I use via the HDMI Port or Mini Display Port to connect it to Port DVI - DL on BenQ monitor?

Is it possible to do and enjoy the benefits of the 144 Hz instead of plain 60 Hz HDMI? Also, is it possible to update a Video of Mac Mini card? (Half-joke but always curious to know if it's possible?).

Thanks in advance!

Also, is it possible to update a Video of Mac Mini card?

No, because it does not have a separate video card. The graphics chip is soldered to the logic board.

60 Hz is maximum refresh rate.

How can I install additional memory in iMac end 2012?

Is there something special I should know about installing more memory in my end 2012 27 "iMac? I installed before memory in older iMacs.

Thank you

Help here > install memory in an iMac

Nothing special. It is not difficult to do since you have prior experience.

Can I update the graphics card in my iMac end 2012?

I am able to update the graphics card in my iMac end 2012? I know that this is not a gaming computer, but I want to be able to play low end games. Is this possible?

# You don't have a 'card' in this model. Starting with 2012 models graphics hardware was inseparable and soldered to the logic board. Looks like this:

{image from iFixit.com}

Small bumps under the person holds the heat sink are all your gfx hardware.

Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

You can buy a worn integers for that.

Only if your machine is Virgin and you want only one specific

can I change my graphics card? (iMac 27 end 2012)

Can I change my graphics card? (iMac 27 end 2012)

N ° it is a welded in the chip. The only way to upgrade

be replace logic card that contains a better GPU.

With the cost and effort required, you may as well buy a recent

iMac.

I have a mac mini (END 2012) super slow...

I have a mac mini (end 2012) super slow and freezing continuously.

What can I do about it?

Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your mini. After his execution after the logfile here. It will never contain any personal information

HDD replacement end 2012

My 512 GB of HARD drive is full. How to replace the HDD on a MacMini end 2012?

https://www.iFixit.com/Guide/Mac+mini+late+2012+hard+drive+replacement/11716

http://eShop.MacSales.com/installvideos/mac_mini2012_hd/

Flash of the MacBook Pro 13 '' end 2012 expansion options

I have a Macbook Pro 13 "end 2012 with 120 GB SSD and I'm looking to increase its storage capacity by using the extension flash connector." I want to buy the highest capacity and fastest flash memory, that I can find, but I am confused and scared to buy flash memory which is not compatible with my Mac. Someone would be kind enough to point out the best options? The more I read, more confused I get. Laughing out loud. Thank you.

The expansion slot Flash is mainly for SD camera card connectivity. Thunderbolt is a slot with many options for external storage.

Spontaneous stop – 0xe06d7363

Spontaneously, my laptop stops and displays error 0xe06d7363 code very briefly before doing so. The moment seems to be quite random. I've been unable event of any activity or a specific task. I am using Window 7 Professional. Thank you.

Hello

1. doesn't it closes unexpectedly when you open a specific application or a web page?

2. have you made any changes to the computer before the problem?

3. what exactly you're talking about when you say "impossible event to any activity or specific task?

4. What is the brand and model of the laptop?

5. is the laptop installed with all the latest device drivers and updates?

6.

Method 1:

I suggest to start the computer in safe mode and perform a clean boot to isolate the application that could be causing the problem. You can also run a scan antivirus in safe mode.

Step 1:

Start your computer in safe mode

http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

Step 2:

This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135

Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer with the standardal start.

Step 3:

I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

http://www.Microsoft.com/security/scanner/en-us/default.aspx

Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

Method 2:

You try to run the fixit from the given link and:

Difficulty of Windows system performance slow computer problems

http://support.Microsoft.com/mats/slow_windows_performance/

Multiple poster on MacBook Pro (retina) end 2012

Hey friends,

I'm trying to put up in my office and I would like some insight or feedback if the following configuration will work for me.

I have a MacBook Pro 15 "with the retina display (end of 2012) and want to connect:

2 x 29 "Samsung Ultra Wide monitors LS29E790CNS/EN (http://www.samsung.com/uk/consumer/it/monitor/curved-monitor/LS29E790CNS/EN) 2-port Thunderbolt on my laptop over a 3rd Samsung TV UE40JU7000 (http://www.samsung.com/uk/consumer/tv-audio-video/televisions/uhd-tvs/UE40JU7000 TXXU) via the HDMI port on my laptop."

All these will be connected through the horizontal Hengedock dock (https://eu.hengedocks.com/pages/horizontal-macbook-pro-retina)

This configuration will work as I'm a believer or would I have problems? Anyone tried this configuration that could give me your comments?

Thanks in advance for any help you could give me.

Hello Jofcom.

Thank you for using communities Support from Apple. I see that you want to use your MacBook Pro (15-inch, mid-2012 retina) with several external displays. I would like to help.

I would like to share your MacBook Pro specifications techniques page.

MacBook Pro (15 inch, mid-2012 of the retina) - technical specifications

Graphics and video Support section indicates that your MacBook Pro supports up to two external displays:

-Intel HD Graphics-4000.
-NVIDIA GeForce GT 650 M with 1 GB of GDDR5 memory and automatic switching.
-Double display and copy video: support simultaneous native resolution on the built-in display and up to 2560 x 1600 pixels on up to two external displays, with millions of colors.

Have a great day.

on my end 2012 see random spontaneous stops

Similar Questions

Maybe you are looking for