Spontaneous stop – 0xe06d7363

Similar Questions

• The likely causes of the spontaneous stop?

  I have the original SS Apple Watch 38mm, the day of the launch, running watch OS 2.2.1, which has worked perfectly.

  However, it stop during last night while I was wearing it during sleep. It has been almost completely reloaded.

  Forced a restart button Crown and side digital for 10 seconds, he had to turn it on.

  I'm about 330 days in a sequence to move, so don't want to lose him waiting for a replacement, so three questions if someone can help:

  1. Are spontaneous to predict judgments?
  2. The cause is more likely to be hardware or software?
  3. The Genius Bar yourself running Diagnostics to identify defects?

  Hello

  1 NO.

  2 either

  3. What is a user to user community, you must apply directly to Apple

  Restore an iPhone contributed to this user > app Apple Watch quit unexpectedly

  If this does not help, you can check the status of the warranty here > ttps://checkcoverage.apple.com/

  We'll find the serial number on your iPhone by touching settings > general > topic

• on my end 2012 see random spontaneous stops

  Starting in the last 2 months I have experienced unexpected stops on my iMac late 2012 with a disc fusion 10.11.5. It's like the Forum someone pulled the plug. To restart I need to reset the PMU. It can happen at any time even at rest.

  What I tried:

  Started in recovery mode and ran disk first aid with no problems found

  reset the NVRAM, remnants of problems

  Checked syslog - found no panic or anything obvious as to any cause, it says previous judgment cause 0

  Now running in secure boot mode and you see is not the problem. But I want to run in normal mode but will get just the closure at any time. I've seen this widely debated question on this forum and elsewhere but can find no obvious solution.

  Does anyone have suggestions on what to do next or how to diagnose or difficulty? This could be due to some software 3rd party components.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The procedure is easy to do right, but it is also easy to do wrong, so I had very detailed instructions. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin") in Safari. Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Lenovo G470 keeps stopping during playback of videos for internet spontaneously

  Hello

  I have a Lenovo older G470 of 1 week I've discovered recently guard spontaneously stopping during playback of the facebook/youtube videos. This occurs regardless if I'm on battery or connected to AC power.

  My G470 has an i5 - 2410M with 8 GB memory, ATI Radeon 6370 M and runs Windows 7 Home Premium 64-bit.

  Someone has similar problems? If so is there a fix?

  try the bios flash update and/or to update the drivers for graphics cards.

  http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_list.aspx?CategoryID=792128

• Computer suddenly stopped

  My computer suddenly shuts completely anywhere from half an hour to several hours apart. I get a box that says location information, but it closes so fast that I was never able to read. I noticed that I had to completely connect. Can anyone help

  Hello

  A spontaneous stop that does not have Windows stop properly is usually initiated by the hardware of the system to prevent damage to the components. Usually, as 99% of the time, it is due to an overheating condition. Modern hardware system monitors this condition and automatically shut down the system if the temperature exceeds pre-set limits. Turning off this feature or change temperature settings is not the right solution, even those these options may exist in the system BIOS.

  The right way to cope is to open the case and blow out any accumulation of dust or debris, in particular on the processor fan and heat sink. You want to check that all fans, including food, work correctly and replace any that are not. Make sure that the tower itself is placed in a position where there are a lot of circulation of air, do not place it in a cabinet with a door that is closed all the time, simply won't be enough air flow.

  In the case of a laptop, the best you can do is ensure that the intake and exhaust exits are cleared when the system is in use, and sometimes, it is recommended that you use a cooler rug to make life easier along. Using one on a soft surface like a pillow or cushion bed can make the problem worse by blocking air flow and prevent the circulation required to dissipate heat build up.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Satellite R630 - integrated webcam does not

  Hello

  I hope someone can help me.

  My built-in webcam on my Toshiba Satellite R630 spontaneously stopped working in the last two weeks.

  I tried:

  -Check if it is enabled in the BIOS and there is no option to select a webcam here.
  -Restore my laptop computer to a previous state when the camera worked. This no longer works.
  -Updated the driver for the webcam - it installs the driver but then it disappears and nothing happens.

  A few things that it might help to know:

  -In Device Manager, "imaging devices" are missing, so I can't find the driver for the webcam here.
  -J' used to get a pop-up whenever I turned on my laptop which was loading a webcam bluetooth but saying that he could not. This stopped happening; I think I turned it off in msconfig.
  -It is not a hardware problem
  -Yesterday, I had a weird time breakthrough - I downloaded an app on my phone to try to use it as a webcam through bluetooth. I had activated bluetooth on my phone and laptop. I plugged my phone into my laptop and the pop-up the camera bluetooth (see previous point) came, but this time worked without the error message. However, instead of my phone works like a webcam, the blue light came next to my integrated webcam and who has started working. I thought it was fixed then all closed and ejected my phone and webcam stopped working again. I tried to repeat this sequence, but with no joy.

  I'm really frustrated and ideas. Can anyone help?

  Hello

  If imagine device isn't listed in Device Manager, it means that the module is not found. Even if the driver is not installed, the module must be included in the BIOS as imagine device, unknown device, etc.
  But this isn't the case

  So I think there are two possibilities: the module's fault or the connection between the module and the motherboard (Controller) isn t put in place.

  As far as I know the internal webcam module is connected to the USB controller.
  If the connection drops (cable) the module will not be recognized in Device Manager

  From my point of few, it must be a nuisance material

• Messages will be no longer send or receive any

  Up to a few days, I could send and receive messages in the Messages, just like I can do it on my phone.

  That to happen spontaneously stopped. From a few days, I send/receive with my phone is no longer the messages appear in the Messages. Also, I can't send/receive messages at all.

  No settings, nothing changed disconnected. It just doesn't work anymore.

  Any ideas?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.iChat.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  If this does not work, repeat the above, but remove the com.apple.imagent.plist

  Thank you Leonie and Ralph Johns (UK) , that some information contained in the present.

• Help requested by Experts of HP only please.

  I would like some advice on a lemon I've been stuck with.

  17 SEP 2013, I bought a new dv7-7233nr desire. Right out of the box, I noticed a slight problem with the display. A task about 5 mm in diameter in the upper left quadrant was discolored or faded looking. I decided to just live with him at the time. A few weeks later the right hinge began to split in two and I could see the mechanical parts inside the hinge. As with my first question, I decided to just live with this question.

  Everything was working great and I fully enjoyed my notebook and was very happy with it. Then the Windows 8.1 update is out and has been dutifully installed by your truly. It is then that all my troubles began. I started having problems where at random times, the laptop would spontaneously stop, restart or freeze just several minutes at a time. The way things worked, I thought that there was some sort of conflict of software to the origin of the problem. After trying for weeks to fix the problem, I decided to wipe the hard drive and replace everything by the restore disks that I had purchased from HP.

  Well well just a few minutes into the routine of erasure of disk a kind of error message popped up saying that due to the alteration of the disc the program wipe could not go further. So I reboot the machine, only to get stuck to the dreaded "CAPS LOCK" flashing light that blinked continuously without any model. This time I had no choice but to involve technical support HP and I went online and after talking with a technician he was allowed to return to HP for repair.

  This started an oddessey on December 16, 2013, that doesn't seem to end. I shipped my unit for repairs on 20 December 2013 where it was received on 24 December 2013. After the Christmas break the repairs have been made and the unit was sent to me on January 2, 2014. Among the items repaired or replaced were the HARD drive and the system board. Nothing has been mentioned about the faulty display and broken hinge and a large part of my chagring that neither item had been repaired.

  To say that I was a little disappointed is an understatement. I contacted HP immediately and explained the situation to the technician who seemed sincerely simpathize with my situation while she began a faster repair process to correct two errors which had missed the previous repair center. She took me to a shift of 1 day instead of 2 days for only my qualified guarantee me shipping. I thought that this extra effort was very nice and I happily sent my laptop in for the second time on January 6, 2014. Now for the second time my laptop was repaired and sent back to me on January 13, 2014, two days ago only.

  Well, my story gets sadder. This time the repair center managed to solve the problem of the video display by replacing the window Panel and before any view. It was great, I thought! Then when I opened the lid of the laptop, I could clearly see the same problem with the hinge right split open as he had been all along. I looked through all the paper work that was sent with the appliance as well as electronic documents that had been sent to me and it was not a simple thing mentioning the right hinge repair. He had not yet been considered. At this point I'm just upset.

  I contacted HP for the third time on this problem and I was told that someone in authority would call me to discuss the possible options that might be available to me and to know what went wrong with the repair team and that they would work directly with me to make sure that everything has been done properly this time. Asked me my phone number and a time to convinent to call.

  Well it didn't happen either. No one from HP called me to discuss all the 'options' as replacement under my States lemon laws. Nor can I talk first hand to a person in a position of 'authority' as I was told to wait. Instead two days later, on 15 January 2014 I discovered that this thing is treated as if it were the first time he was going to be sent in for repair. I was not extended the courtosey to have the speed of navigation, upgraded in the air the next day or any other indication that this would be done at a fast pace.

  If you have followed my story all along, then maybe you can understand why at this point I am absolutely Livid with HP service and would really like the chance to talk to a real person such as the Manager or the Director of the service department there in Grapevine, Texas. I want really to use harsh language and do it to a very strong and vigorus volume just to make me feel a little better. But I'll settle for a civil conversation and get some sort of action as ensuring that this repair is the subject of a follow-up and hand carried over in the process of my someone in management and an attempt to ship the unit to me using the delivery the day even or at least the next day gaurunteed 08:00.

  My question to you Experts HP here is you think that this could make it happen? If I can't return this laptop to me before the end of this week, as January 18, 2014, so I couldn't return at all. I can just use it with the hinge collapse as long as no other damage occurs. Maybe a little later in the year then I could make time to get the hinge repaired correctly. Do you think I would run in any warranty problem, if I decide to wait? I really want to cut my nose off just to spite my face.

  If you could advise me on which I could call on this quandry, or just what you think would be better for me to do at this point, you really do me a huge favor, not to mention restoring my faith in HP s Comsumer products.

  In any case thank you for reading my sad rant and I hope you have a great day.

  Best regards
  FlyingHorse
  
  Product name: HP ENVY dv7-7233nr Notebook PC
  Product number: C2N68UA #ABA
  

  FlyingHorse, I saw your post and has forwarded to the right people for their review. You should hear from someone bit via private message on this Forum.

• My iMac just has frozen and then restarted itself?

  Hello

  I just got my iMac freezing screen and then spontaneously stop and get back to work. There was no window of kernel panic or anything. My pointer froze right on the screen, then a few seconds later my iMac restarted itself. I've never had this happen before. Anyone know why? I recently installed 32 GB of RAM - that this has something to do with it?

  Richard

  If it works OK, then it just may be a little problem of memory. Don't forget to fix your hard/SSD to be sure there is no data corruption caused by the abnormal termination.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

• Put unexpectedly in windows vista Ultimate edition

  Windows Vista ultimate spontaneously shuts my PC toshiba qosmio F45AV412. Y at - it a fix for this?

  Hello

  It cannot be Vista. A spontaneous stop without error message (blue screen or stop error) is usually initiated by the hardware of the system in response to a dangerous situation. It is almost always an overheating problem. Most modern systems have mechanisms of integrated protection of close if temperature limits are reached for any damage to the processor and the basic components. The solution is to ensure correct cooling in ensuring that the inlet and exhaust are clear, the fans are running properly, and that the system is allowed to completely cool if a shutdown occurs. Some find this laptop cooling pads help a lot. Do not trigger temporary in the BIOS system solution limits, unless you are willing to pay for the repairs and replacement parts.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Application of AIR conditioning trouble

  Hello

  While I am an experience relatively PlayBook/BB10 AIR for developers, it's been several months that I've compiled my apps and need to do. (since my apps have spontaneously stopped working correctly for users on BB 10.2)

  Here is the error I get when running my old orders of packaging:

  C:\Users\danielb\AppData\Local\Temp\bar-app8586277419058915065.XML: error 102: space name invalid http://ns.adobe.com/air/application/3.1

  Error: Validation of the AIR is not

  The top of my XML file looks like this:

  
  http://ns.Adobe.com/air/application/3.1">

  I think remember adding / changing this setting to namespace was required when I rebuilt the origin of these apps (which were written for PlayBook) for BB10.  I scanned through the current guidance on the web to create applications via the command line and they still refer to the value of parameter of xmlns application above. I noticed a new 'forceAirVersion' to the package manager command. I tried and it did not help.

  The version of the BB10 AIR SDK I downloaded is 3.2.1.

  I thought that I had solved when I realized that the version of AIR I had installed was 2.6, so I deleted this installation and installed AIR 3.1 software development kit. But that does not solve the error. The command I use for the package is:

  BlackBerry-airpackager-package Print.bar - installApp - launchApp Print - app.xml Print.swf button.png title.png instructions.png QNXSkins.ane back.png blackberry - tablet.xml blackberry-tablets - icon.png - device 192.168.1.105 - password playbook - forceAirVersion 3.1

  Figured it out.

  I have re-installed the BB 10 Adobe AIR SDK, and now it works.

  My guess is that when you install the SDK of AIR BB10, it checks the directory containing the AIR SDK (that you provide) and defines a kind of configuration based on the version of the AIR SDK. Thus, the good AIR SDK installation * after * you have installed the SDK of AIR BB10 does not solve the problem - even require you to reinstall the BB10 AIR SDK.

  Not sure if this theory is correct, but if it is, it's something that should correct the BlackBerry, or at least to provide the user with an error message that indicates that the SDK of AIR BB10 needs to be reinstaled.

  To reiterate, I think BB should bring the following improvements:

  1 detect, to the use of the blackberry-airpackager, when the version of the installed AIR SDK is too old and if so, provide a good error message indicating this with a link to explain how to solve the problem.

  2. If a user has re - install the AIR SDK to solve the above problem, either:

  a. allow the BB 10 AIR SDK detect this and switch its configuration to the new version of the AIR SDK.

  b. leave the BB 10 AIR SDK detect and inform the user therefore re - install the SDK of AIR BB10.

  Daniel

• Digital Editions says that the books are loaded on the Kobo and Kobo library is empty.

  Hello, I have a problem loading the content on my Kobo (Aura H2O). Previously, I was able to add books to the library without any problems following the directions online, but it has spontaneously stopped working.

  Location:

  I've loaded onto Adobe Digital Editions on my computer and books (Kobo) authorized device.

  I add the copy of the book to the device.

  When I click on "Kobo eReader" breast Digital Editions, it is said that the books are loaded.

  I eject the eReader.

  There are no books in the library.

  I have already tried:

  Relocation of Digital Editions.

  Re-authorizing the unit

  Button factory reset on the device.

  I called the Kobo helpline, and they referred me to Adobe.

  Any ideas?

  Thanks for your help.

  -Lisa

  Try to reset your player of standard parameters and starts again again?

• TECRA 8100 stops spontaneously

  I have a 8100 Tecra with Windows XP SP2. The laptop stops spontaneously. Without warning, the screen goes black and flashes green battery LED. The battery is in poor condition (max. power for 5 minutes, then it beeps low battery). Therefore, I have the laptop still plugged into the mains.

  Does anyone have a suggestion how I can solve this problem?

  Greetings, Ben

  Hi Ben

  For the solution, you need to know why this happen. After reading the description of your problem, it is not easy to say why this is happening and we can only speculate what may be the problem.

  The question of a beginning: is this laptop cleaned in the past? I guess this may be full of dust and cooling system and cooling rack may be blocked by dust.
  Without appropriate computer hardware laptop cooling temperature critical and the result is suddenly turned off.

• Pavilion dv8000 series (dv8339us) stopping spontaneously

  Dv8339us my wife began to stop spontaneously.  There is no indication of any problem on reboot.  Windows starts as if it had been properly closed and there are no errors in the event set.  There are currently 5 - 20 times a day for the past few days.  We keep the vents and heatsinks with canned air.  I installed Rightmark and CPU between 96 C temperature noted when she plays his Ultima Online, otherwisze, is in the treble 70 C.  Is this normal?

  What causes these shut downs?  What are my next steps in troubleshooting?

  I am a graduate of computer science and I have no problems tearing apart the system.  I replaced a broken hinge.

  Thank you

  Martin

  http://h20181.www2.HP.com/plmcontent/NACSC/SML/results.htm?SID=7900379&MEID=69E2929C-DBC5-4051-B053-B8325FC3340B

  It's the library of Service HP dv8000 (Intel based) to laptop series.

  Select Fan/Heatsink to the left, it should provide the text and video (sound) to run a procedure step by step for you access to of the heat sink, if you really want to do it yourself.

  As this operation requires you to remove the motherboard from its housing, it is a MAJOR operation. If this laptop is still under warranty, I think you should send this return to HP and ask their service department to control the problem of overheating for you.

  Problem of overheating or thermal closed are the following (not in order any)

  1. entry or the exit of the Fan/Heat Sink assembly are blocked by dirt or lint.

  2. the thermal grease or paste is not functional at its optimum heat transfer rate and must be replaced.

  3. defective heatsink.

  4. graphic does not support some 3D gaming features and CPU spend way too much time to the emulation of the function of the software.

• XP Professional restarts spontaneously everytime then stop

  XP not stop, but that it recharges spontaneously immediately after his arrest.

  Hello

  • What were the changes made before the issue occur?
  • How long have you been faced with this problem?
  You can check this link:
  Windows XP restarts unexpectedly or restarts when you shut down the computer
  http://support.Microsoft.com/kb/320299