On-screen volume display

Similar Questions

• T60 Portable appears on-screen Volume after has Hotkey of integration update

  I have a laptop ThinkPad T60 (2008-HC6) running Windows 8 Pro (32 bit). Today (24/01/2013), I installed the 'Hotkey for Windows 8 features Integration' update which was released January 18, 2013. After the reboot, the display indicator pops up when I change the volume on my laptop by pressing the volume up, volume down, or disable the keys does not appear. The keys work fine, but the indicator does not appear.

  I tried looking for an online solution. A common solution, installation of Lenovo Energy Management, does not solve my problem. No other software has been changed on my laptop between when the last power worked and when I installed the update of keyboard shortcuts.

  I found the problem was with the "On Screen Display" of the update part. This particular update is in two parts to it. First, it adds the "Lenovo Patch Utility" program. Second, it updates the "On Screen Display" program, assuming that an older version was already on the computer updated. Adding the "Lenovo utility Patch" caused no harm, but the update of the "On Screen Display" prevents the on-screen indicator of volume display.

  In the end, what I ended up doing took off the "On Screen Display" with the same utility as I used to be updated. Then I downloaded the latest next version of the utility and installed the version of the utility of the program "On Screen Display".

  My volume indicator screen is now back and works well.

• An on-screen volume indicator has disappeared from the Compaq Presario running Windows 7

  I have a Compaq Presario CG56 with Windows 7 64 bit.  All of a sudden the volume display on the screen (NOT the taskbar icon) does not appear when I adjust the volume.  I don't change anything on the computer.  Any ideas?

  Hi again,

  If you do not want to install / uninstall anything, then you can restore your system to the point where you remember that visuals work ok.

  Resources:

  How to do a system restore in Windows 7

  When it will not work then you will need to use the solution to my previous answer.

• Where can I download this Volume display?

  I use a dv4i-2100 but my display of the volume does not work! How can I have this Volume display?

  Hello

  The volume OSD in your photo is installed with HP MediaSmart SmartMenu - you must have at least another MediaSmart application installed before installing SmartMenu.

  Kind regards

  DP - K

• I need remote support to resolve a deadlock on my screen to display the desktop.

  I need remote support to resolve a deadlock on my screen to display the desktop. When I try to grant the permission I get message saying that I have no contacts.  apparently I need a support exxpert email address. How I not get that?

  Hello

  Thank you for writing to Microsoft Communities.

  I suggest you get in touch with support chat were we access the computer via remote control and solve the problem.

  http://Microsoft-Chat.com/

  Future prospects for more questions

• I have a HP Photosmart C8180 printer on the printer screen it displays C2FF8575.

  I have a HP Photosmart C8180 printer.  On the printer screen, it displays C2FF8575.  It won't turn off, unless I unplug islet that my Undo button keeps flashing. What does all this mean?

  The code of C2FF8575 refers to a fatal mistake in the firmware of the printer. The only thing you can do when this error is a hard reset. I will include the instructions below. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Cannot change the login screen to display all users.

  I'm unable to change the sign on screen to display all users.  It is said to remove the client service for netware (CSNW), when I go to remove only the open is available.  The service has not been started.

  Where did you go to remove the Client Services for Netware?

  Go to network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your network adapter (most likely, Local area connection), and then select Properties
  On the general tab, you should see a list under "this connection uses the following items."
  Select the Client Services for Netware, click to remove the check mark, and then click Uninstall.
  OK your way out.
  Restart (it is not automatically)
  After Windows starts, go to control panel > user accounts > Change the way users log on and outside
  Select the options you want and click on apply changes.

  The list of questions should normally (personal computers) include only 4 following:

  Client for Microsoft networks
  QoS Packet Scheduler (optional)
  Sharing files and printers for Microsoft Networks (only if you want to share files or printers)
  Internet (TCP/IP) Protocol

  If you do not see Client Services for Netware on the general tab of the connection to the Local network or if you still have the problem after uninstalling it this connection, examine the properties of other components in the network connections.  For some of them (e.g. Dial-up), the list of questions is on the network rather than on the general tab tab.

  If you can't find the Client Services for Netware for ALL network connections (and therefore cannot remove), reinstall it, and then follow the instructions above to uninstall.

  To reinstall:

  1. go in the network adapter Properties/General tab you use and then click on install
  2. make sure that 'Client' is highlighted, and then click Add.
  3. highlight "Client Service for Netware", click OK
  4. leave your PC restart.

• Frozen on screen volume

  My Sport Clip was working fine until today. I listened to him and he just stopped playing. I looked at the screen and it was the screen (the one that appears when you set the volume) volume. I couldn't get out of this screen. Shut down the power button to reset and then rebooted the player but it starts immediately to the volume screen. I have reset several times now and have the button for as long as a minute boots, always on-screen volume. Anything else I can try?

  Seems to have cleared up his car and works fine now with 1.17.

• How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

  How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

  Vista running on a Toshiba Satellite L500

  Hello

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right-click on empty office rotation - graphics options.

• How to pop the last second screen to display

  Hi all

  I have a first screen that displays the table of web service, then there are two buttons to display the next screen that displays in turn web service table, but added screen between the two spinner, so when the user clicks on the "back" button it will display spinner screen and if I replace onClose() to display the last second I need to call the web service again but on gprs network is about taking the time so current screen freezs up to answer come from web service, tryied poping current screen but no luck, so it is possible to get the last second display battery or any other alternative.

  Thank you

  Nishant Raut

  Many thanks, Jitendra.

  This works. Here is my excerpt for anyone facing this problem.

  public boolean onClose() {}
  synchronized (UiApplication.getEventLock ()) {}
        
  Screen screen is UiApplication.getUiApplication () .getActiveScreen ();.
  UiApplication.getUiApplication () .popScreen (screen);
  Screen2 screen is UiApplication.getUiApplication () .getActiveScreen ();.
  UiApplication.getUiApplication () .popScreen (screen2);
  }
  Returns true;
  }

• Screen not displayed while doing a background activity

  Hello

  There are many resources in this forum on it and I tried most of them, but none of them does not work for me.

  I want to display full screen while doing a background activity. I have:

  1. created the screen with a class that extends the class screen
  2. created a thread with my function activity of bottom ending with poping up on the screen.
  3. pushScreen()
  4. thread. Run()

  The right way to start a thread is thread.start (), not thread.run)

  If you call thread.run (), you simply run the Runnable class run() method with your own feed of the event, and this is what causes the screen to display * after * your activity of 'background' (which really exists in the foreground) ends.

• Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop

  Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop immediately.

  Repetition and crashes again. Help it does not start!

  Solved! Tried everything in support documents and none of it worked. Frustration massive Adobe Chat staff who knows nothing and just told me to look at the documents of support again and again. They also gave me a phone number in Australia which has a recorde d message saying that the product is not supported! What is everything?

  Finally Adobe technical support Anand called me (from when I have opened the original case of support which gave me the serial number).

  Just had to rename the file SLCache in c:\program (x 86) and again the EULA and reactive. Now everything works fine. Way to hard.

• Satellite L670 - looking on the screen BRIGHTNESS and volume display

  Hello. I have a Satellite L670 and I m looking for the on-screen display of the volume and BRIGHTNESS.

  It is the first of my laptop which seems to offer not to display these key elements and it is very sinuous to find the standard 3 + 4 for the volume keys and F6 + F7 for brightness, especially in an environment dark.

  Before this Toishiba had a few DELL Latitude and Inspiron Laptops and my wife uses a Samsung and had all this laptop-screen computers or the possibility of opening the display of the volume on fn + arrow keys.

  Please excuse my English. Maybe someone can understand my problem anyway ;-)

  CU, Sascha

  Hello

  What you want to say no to the display screen?

  Different laptops have different combination of FN keys. On Toshiba laptops, you can change the display by pressing FN + F6/F7 and on other laptops, you have other F - keys for this. There is no standard for these FN keys.

  Usually, if you press the FN key only you should see at the top of the screen flash cards. You see them?

• My volume display keeps popping up in the middle of my screen every second nonstop.

  I tried to restore my laptop, but it didn't work. I can't do anything without the display being there all the time on the laptop. It seems that this http://i68.photobucket.com/albums/i38/khmerangeldreamer/blah-1.png I found that you can take out the battery and it will fix it. The problem is I have a samsung and you can't really do this without prying the computer laptop everything and disconnect a bunch of son and others. I rather not ruin it more.

  Volume on-screen display is controlled by the utilities developed by PC manufacturers [they are not part of Windows 7].

  It seems that this utility is damaged.  Go to the support site for the manufacturer of the PC and find the name of the utility, then download another copy & install it.

• get rid of the volume display dv7 screen

  Hi, I have a laptop dv7-4280us, and I would like to know if there is a way to remove the little notice that appears when you turn the volume upwards or downwards.

  (this thing: http://img853.imageshack.us/i/volume.png/)

  Although it is useful, as I play a lot of games, most of which run in mode full screen. When you try to activate the volume upwards or downwards, he returns to the office and generally won't let you get into the game (depending on the game, but to do this, a good amount of my games). So I was wondering if there is anyway to get rid of it, because it is nice, I don't really need or want. I couldn't find any settings from anywhere to turn it off, if anyone can help?

  Hello

  Windows Control Panel, open programs and features and uninstall HP MediaSmart Smart Menu.  Once done, restart the laptop.

  As an alternative that won't not lock the primary display and return you to the desktop, try the application at the link below.

  http://www.intowindows.com/3rvx-skinnable-beautiful-volume-indicator-for-Windows-7/

  Kind regards

  DP - K