on the main drive for the computer, how did you partion and format the rest of the hard drive
My main drive in the computer is 250 GB, I have a primary partition as 104 GB. How to partition and format the remaining storage space? Thank you very much
In disk management, IMO, however, the drive is too small for multiple partitions, better single gain, the C: drive, of the maximum size available
Tags: Windows
Similar Questions
-
When you buy a used computer how can you getaround left password buy the former owner, so you can to the low load you information
Hello
I'm sorry, but the strategy of microsoft in these forums, is that without assistance will be given about the lost, unknown or forgotten passwords
read the policy at the link below
______________________________________________________________
and when you buy a second hand computer, because you never know what it contains or is used since, the best policy is to reinstall the operating system
How to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
HP link Setup requires an account on the remote computer, how do you do that?
HP link Setup requires an account on the remote computer, how do you do that? Someone please help! Thank you.
I understand that you need to know how to set up a user name and password on the remote PC to HP LinkUP.
This document explains how to use the program. Looking at the screenshots included, looks like it's just using the user account that is within Windows on the system. If the local account on the Windows (remote system) system user does not have a password, then HP Link UP may not work for security reasons. Some remote access programs (even on a LAN) have access problems with empty passwords on the remote system.
This document has a video on the program if you want to examine.
Let me know what happens.
-
My graphics card has a driver that is 9 years old, I know there are newer drivers for it. How did microsoft update tells me it's up-to-date.
Your option is to buy a Windows 10 compatible graphics card, only very rarely a graphic map of the era XP would be appropriate/compatible with Windows 10.
See you soon.
-
If you have two video layers, how did you composite the bottom of the top layer in the layer below mate in Premiere Pro?
You have an element that contains the matte and the other clip contains the filling?
Put the matte clip on a track directly above the clip to fill.
Go to the effects Panel > video effects > Keying > overlay cache track and apply the overlay cache track for your video of filling on the timeline.
Ensure that this clip is selected in the timeline panel and then go to the effect controls panel, whirlpool open orders the overlay to cover track by clicking on the triangle next the the name of the effect and Matte together: to the video track containing the Matte Clip.
MtD
-
How can I take one allows so-called data entry I ask is how much you have and back up this data in some way, and then the system will offer you different options
Not with ordinary Muse. These things requires a dynamic backend with a connection database and in your case quite likely some substantial customization and programming.
Mylenium
-
How did you record pictures from a memory card on computer?
How did you record pictures from a memory card on computer do not directly use HP Photosmart 7520 web services?
No, that would be the only way to access the memory card.
-
My acrobat 8 is recorded for a computer that has been hacked and is fried, but I can't reg to this computer and now I cannot use it for 30 days on this computer
Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations
-
How did you would return an ImageView along its vertical axis?
Hello
How did you would return an ImageView along its vertical axis? It would help me to reduce the number of image files, that I need in my project.
Thank you
JoseApply a transformation of rotation of 180 degrees on its lower left corner followed by a translate directly by the width of the image.
See http://jewelsea.wordpress.com/2011/11/16/rotation-transform-example/ for a code pointer (not exactly what you need but I hope it will help you understand how to achieve what you want).
-
As I said above, I'm new to the world of computing, and I'm currently enrolled in classes, well, my problem is that I got my frozen unconstitutional office. Could someone give me some advice on how to fix this error. Thank you very much for your company.
Hello
If the system is blocked, you may have to restart. If necessary, you can restart in Mode safe
by pressing repeatedly F8 as you boot/startup.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Have window xp error. A problem is preventing windows to check exactly the license for this computer. error code 0 x 80090006. Then it disconnects you return to the screen of the user menu.
Error code 0 x 80090006
This problem occurs because the drive letter has changed or that some files can be found in default locations.
See: http://support.microsoft.com/kb/914232
You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer
When you try to start a Microsoft Windows XP-based computer, you may receive an error message that contains different error codes. This article describes the causes of the different error codes. This article also provides workarounds for the following error codes:
- Error code 0x80004005
- Error code 0 x 80090006
- 0x8009001d error code
- Error code 0 x 80070002
- Error 0x8007007f code or code error 0x8007007e
- 0x800705aa error code 0x8007007e error code and error code 0x80004005
- 0x800705aa, error code 0 error code 80070002 x, error code 0x80004005, 0x800405aa error code and error code 0 x 80090019
- 0x800703e7 error code
Additionally, this article contains workarounds for some error codes that aren't in this list.
etc.
TaurArian [MVP] 2005-2011 - Update Services
-
I have a program that runs in the background of my computer, how can I find and stop him
How can I find and stop a program that runs in [t] he bottom of everything I do on my computer
Press CTRL-ALT-DEL
Launch the Task Manager
In the Windows Task Manager, click the processes tab.
Locate the process / click on it (to highlight) / then click on end process
If my comments have helped please vote as helpful.
Thank you.
-
How did you just watch and see which files/folders are already on the portable hard drive?
Trying to access the site just to get a glance at what already on the disk. Haven't used in years. Think that it could possibly be this hard, never be you making fun of me!
Hello Koolbreeze7,
I'm not sure of the method that you use to access your external drive, but regardless of the type of drive, it's (portable hard drive, USB key, etc.) they are all accessible fashion.
It works on all versions of Windows.
Connect the USB hard drive. A driver installed the first time you use it.
Click Start, then computer and double-click it to open it.
You should see similar to this image of hard drive icons.
When you plug the laptop drive, another icon of the disc is added to your list. This is the icon you open to access the content.
If a new drive icon does not appear when it is connected, your computer does not recognize the drive and so you will have to go through the steps of troubleshooting of the error.
Here is a video showing the same thing on a XP machine.
Videofrom YouTube.
Note: Where, he says, 'My computer' can be as simply "computer" depending on which version of Windows you are using.
-
This sentence is the last thing on my list of contacts and appears only when I use the contacts list to send an email.
I don't know how to remove and how it get there in the first place. I can delete it at the time, however, it
y at - it next time. I can't click on it and there is no address attached.
Can you help me? IT IS SAID HORNEY GIRL HERE
BEA Harrison
Hello
you say not what e-mail program, you use
you use Hotmail?
I'm sorry, but we cannot help with hotmail problems in these forums in response to vista
Please repost your question in hotmail in the hotmail link below forums
http://windowslivehelp.com/product.aspx?ProductID=1
ForumsConsult with Microsoft Certified Solutions -
n Win 8.1/firefox it were the tabs above and below windows.
Win 10/firefox, there is now NO windows below for switching windows.
How to you switch windows (tab groups) now?
Windows Firefox 39.03 10On the first program that I started after the launch 10 new windows, I can't do what I have been doing it for years and I can not understand.
I hate the changes of major operating system.
plugins installed
- Adobe PDF plugin for Firefox and Netscape 15.8.20082
- Garmin Communicator plugin 4.1.0.0
- GEPlugin
- Google update
- HPDetect
- Deploy Script NPRuntime plugin Library for Java (TM)
- Next-generation Java plug-in 11.40.2 for Mozilla browsers
- Plugin to detect Nero Kwik Media.
- Nitro PDF plugin for Firefox and Chrome
- Shockwave Flash 18.0 r0
- VLC Web Plugin 2.1.3 media player
- Detector of presence of WildTangent Games App V2
- NPWLPG
Is the problem that the Windows task bar is hidden by the Firefox window, or that changes to the taskbar make it impossible to change the windows?
If the taskbar are hidden by Firefox, it is possible that Firefox is in full screen mode. The F11 key toggles between full screen and normal views.
Another potential problem is that Firefox sometimes seems to collect data of erroneous screen size of the operating system and that the window of Firefox too large. You can rename the relevant settings file to see if that helps.
Open the settings folder (AKA Firefox profile) current Firefox help
- button "3-bar" menu > "?" button > troubleshooting information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.
Leave this window open, switch back to Firefox and output, either:
- "3-bar" menu button > button "power".
- (menu bar) File > Exit
Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.
Launch Firefox back up again. Windows normally appear again?
To restore the missing bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:
- Right click on a place empty on the tab bar (or the button '+')
- Press the Alt key to activate the classic menu bar > view > toolbars
- in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)
To activate the menu bar, toolbar bookmarks or other bars, click it in the list.
Maybe you are looking for
-
I recently bought a new computer from desktop HPE-300z, personalized with a card his Creative Sound Blaster X - Fi Xtreme Audio (Windows 7 Home Premium OS). I tried to reach my old Boston Acoustics speakers 'Digital Media Center' system but not soun
-
Satellite C70-A-13D: cannot create recovery media - error 02016e-3 c-0000000
Hello I am creating a recovery flash drive on my new laptop satellite c70-a-13d windows 8 operating system and get the following message differences between the files following z\recovery\install20.swm target path e:\\zzimages\zzimages\install20.swm
-
Problem remote control RM-LVR2V Live-view
RM-LVR2V can't conect with my camera AZ1, after that I updated with version 2.0 remote control Can I solve this problem. Sorry for my English
-
Outlook express hangs after the connection with the mail server
OE6 hangs after the connection with the mail server?
-
How to automatically delete files after the attachment to an insurance program
Original title: I have files which I attach to an insurance program from a file of work in PROGRESSHow can I automatically delete when he moved.