On the Page validator errors

Similar Questions

• How to catch the exact validation error message?

  Hi experts,
  
  I want to intercept the exact validation error message.
  If the validate operation fails then I get the following SOAP fault:
  
  < env:Fault xmlns:ns0 = "http://docs.oasis-open.org/wsbpel/2.0/process/executable" >
  ns0:invalidVariables < faultcode > < / faultcode >
  faultName < faultstring >: {{http://docs.oasis-open.org/wsbpel/2.0/process/executable} invalidVariables}
  messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage} < / faultstring >
  < faultactor / >
  < detail >
  < exception / >
  < / details >
  < / env:Fault >
  
  However, in the Manager of the company (audit trail) I see the following message to the failure to validate the operation:
  
  Invalid data: the value of the variable 'req_ProcessAdjustmentOp' part 'bodyUPI' does not match the schema definition for this part of invalid text '?' in the element: 'date '. Invalid xml document is shown below:
  
  I would like to send this message to the service consumer because it contains more information about the error. How I do that? I've tried the function ora: getFaultAsString() but I had the original sin.
  
  Thank you
  Viktor

  The root cause of the problem is that, in the bpel fault lifted, the details of the fault are empty (i.e.) {summary}, {details} and

   are not populated for  element.
  This same issue was logged and tracked via Bug 12551111 - VALIDATE ACTIVITY DOES NOT POPULATE FAULT VARIABLE FROM CATCH - published on My Oracle Support.
  
  As per developments update in 12551111 :
  Failure content won't be set for standard faults according to BPEL specs. It will be available in the audit trail.
  
  This means that :
  1. {summary} , {detail} and 
  

  will be omitted for standard faults fault variables.
  2. given that the details of 'fault' are not met, "validation" of the variable of fault against the schema (RuntimeFault.wsdl) should fail.

  There is a demand for improvement already filed: Bug 12700279 - FAULT VARIABLE DETAILS ARE NOT POPULATED for STANDARD HOLES.
  Unfortunately, at the moment there is no workaround known solution for this.

  Best regards
  Oana

• How to show the component validation errors inline instead of in a popup note?

  Hello

  IM using jdeveloper v. 11.1.2.3.0

  I want to show validation errors for an inline element, and not in a pop-up note without counting as the component.

  I found that it is possible through the use of the af:message component.

  The af:message works very well as long as the component must be committed, is not within a taskflow in a region.

  If this is the case, it seems that the af:message component is ignored, and validation errors is still a time showed in a popup note.

  For an example, see the code below. This works very well on an ordinary jspx page. If the same code is implemented within a fragment of jsff in a taskflow and taskflow is then implemented as a region in a regular jspx page - the validation error is displayed in a pop-up note instead of inline.

  < af:message = "input1" ID = "message1" / >

  < af:inputText id = value of '1' entry validator = "< some binding value > ' ="< some binding validator >"/ >

  I solved the problem. Apparently there's a bug in the ADF, so that the attribute 'for' points to a component id wrong (client side). It simply puts the container of name in twice.

  The solution is to prepend ":" in front of the id of the component in the attribute 'for' during the use of the af:message within a fragment of a page in a region. See the example below.

• The page validation: function returning a Boolean

  Hi guys,.
  
  I'm doing a page validation simple to check an element in my presentation table if it is a number or not:
  
  START
  FOR i IN 1.. apex_application.g_f12. COUNTY
  LOOP
  IF LENGTH (TRIM (TRANSLATE (apex_application.g_f12 (i), "0123456789","" "))) is NOT null
  THEN
  RETURN FALSE;
  END IF;
  END LOOP;
  END;
  
  but I get this error message if g_f12 = AAA:
  
  ORA-06502: PL/SQL: digital or value error: character of number conversion error
  ERR-1021 error cannot run the validation of the "body of the function that returns a Boolean.
  Ok
  
  If g_f12 = A12 or a mixed alphanumeric it will work!
  
  * (I tried this with the function returning the text and it works like a charm, but in this case I have to use the function returns boolean to allow me to translate the error message) *.
  
  am I doing something wrong please help
  
  Thank you

  Hello

  Well, now when I look at the error message, I think that the problem is quite obvious.

  Kind regards
  Jari

  -----
  My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Cannot change the page editable errors

  Hi all
  
  I created a Web site that uses DWT editable regions as well as editable ice regions.
  
  http://www.p3sf.com/
  
  The index.html page isn't an attached template and all the other pages are attached to the model internal.dwt
  
  I created regions editable in the DWT and also created the boxes of ice in the model. Now, when I go to a page and press ctrl + E, and then press the button change, I get errors.
  
  On the index.html page (which is not attached to a model), I get "you cannot edit or duplicate this page because it contains the invalid supplement. "Reason: there is an editable region that contains prohibited tags.
  
  I went and looked for these tags, but have no idea of what they are. And whereas I have created the page with Dreamweaver and added parts of ice, why would I errors.
  
  On other pages such as http://p3sf.com/events.html , I used to get a different error, but now I get the same error as above.
  
  Help, please! This ice is supposed to make things easier, but I did have to work for one of my many sites yet.
  
  Thank you
  Leslie

  Hello, Leslie.

  First of all, your index page does not validate because you have nesting problems (some of your labels are not properly closed before starting a new tag). However, aside from that, you can have scripts inside InContext Editing regions. The error that you receive when you use InContext Editing is caused by the script inside the form located in your editable region. Move the script in the editable area and InContext Editing does not return the error.

  The line of the related help page that apply to the present case is: there is an editable region that contains prohibited tags. The forbidden tags include SCRIPT, map, AREA, OBJECT, and EMBED.

  Please let me know if you need more help with this.

  Best regards
  Corey

• function returning the text validation error

  Hello
  
  I have a page where I can insert/update user, organization, responsible.
  Organization can be nullable.
  
  A single user can both be responsible for an organization.
  
  To check this responsible for validation, I made a function that returns the error of validation of text as follows:
  
  BEGIN
  FOR c IN (SELECT usr_spa
  OF kpi_users
  WHERE usr_org_id =: p22_usr_org_id
  )
  LOOP
  IF upper(:p22_usr_spa) = upper('YES') and upper (c.usr_spa) = upper('YES')
  THEN
  RETURN 'user is already responsible for this organization' |'. ' ;
  END IF;
  
  END LOOP;
  
  END;
  
  The validation works fine.
  
  But it won't when I want to insert a new user, without attributing it to an organization.
  I get the following message:
  
  ORA-01722: invalid number
  
  Cannot run the validation of the "body of the function return text' ERR-1024.
  
  Can someone please help me solve this problem?
  
  Thank you

  Hello

  The user selects a body in a select list? If the default value is considered "null %"? If so, you could modify the test to the IF: P22_USR_ORG_ID <>'% "| 'null %' THEN

  Andy

• the page validation

  (1) where to place validation is better, component or recode?
  (2) how to manage only allow the letter, number and special characters? can I use ascii value?
  
  Thank you!

  I was thinking something like this

  For &i = 1 To Len(&string)
     /* get character from string */
     &chr = Substring(&string, &i, 1);
     /* check if chararcter is in ascii range 32 - 127 */
     If Code(&chr) < 32 Or
           Code(&chr) > 127 Then
        /* Set field to Error style */
        &Field.Style = "PSERRORTEXT";
        /* break out of loop */
        Break;
     Else
        /* proceed with following character */
     End-If
  End-For;
  

• Could not generate code to activate one or several web fonts on the page "xyz" [error Code 400: font not available]

  No idea how to remedy this?

  It all started happening after I installed the last week of the update or so back and as a result I can't update/download my Web site. The conflict seems to be with Adobe Typekit. I reissued the kit that relates to the site Web and also disconnected (e) Adobe Creative cloud and come back to help reset things (I even uninstalled/reinstalled Muse) and the problem still persists. I was looking for even a way back to the previous version of Muse, but browse the forums that seems impossible to do. All this without success.

  Hi Daniel.

  Sorry you've run problems with this. The issue may be the result of changes made to your account. Can you please write to us at [email protected] with your account information so that we can examine the problem?

  Best regards

  Molly @ Typekit

• Prevent validation when the page navigation

  I use Jdev 11.1.1.7.0.

  I have a jspx page that has an empty form.

  But when I want to leave the page without entering anything, I get the form validation error messages.

  How can I prevent the validation error without worrying if the form has input values?

  Set the immediate property of the component of the navigation (link... button) to 'true '.

  Timo

• Validation error - outflow of the payload

  Hello

  I am creating an outgoing stream to send a X 12 4010, 810 document to a trading partner.

  Got the error: the payload Validation error.

  Payload is as below

  <? xml version = "1.0" encoding = ' UTF - 8'? "> < Transaction-810 xmlns =" http://www.edifecs.com/XData/200 "" xmlns: xsi = "" http://www.w3.org/2001/XMLSchema-instance ' = XDataVersion = "2.0" Standard "X 12" Version = "V4010' CreatedDate =" 2007-04 - 10 T 17: 16:24 "CreatedBy ="ECXEngine_837"GUID ="{12345678-1234-1234-1234-123456789012}"> < internal properties - > < name of data structures ="Interchange"> < search name ="InterchangeControlVersion"> 00401 < / research > < search name ="InterchangeReceiverID"> MarketInc < / Lookup > < Lookup name ="InterchangeReceiverQual"> ZZ < / Lookup > < search name ="InterchangeSenderID"> OracleServices < / Lookup > < name" "" search = "InterchangeSenderQual" > ZZ < / Lookup > < search name = "InterchangeUsageIndicator" > I < / Lookup > < name search = ' Standard ' > X 12 < / Lookup > < name of property = "ElementDelimiter" > 0x7e < / property > < property = "InterchangeAckRequested" > 0 name < / property > < property name = "InterchangeAuthorizationInfo" > i < / property > < property = "InterchangeAuthorizationInfoQual" > 00 name < / property > < property = "InterchangeChildCount" > 1 name < / property > < property = "InterchangeComponentElementSep" name > 0x5c < / property > < property name = "InterchangeControlNumber" > 000000001 < / property > < property name = "InterchangeControlStandard_RepeatingSeparator" > U < / property > < property name = "InterchangeControlVersion" > 00401 < / property > < = "InterchangeDate" > 140313 property name < / property > < name of property = "InterchangeReceiverID" > MarketInc < / property > < name of property = "InterchangeReceiverQual" > ZZ < / property > < property = "InterchangeSecurityInfo" name > security I < / property > < property = "InterchangeSecurityInfoQual" > 00 name < / property > < property name = "InterchangeSenderID" > OracleServices < / property > < property name = "InterchangeSenderQual" > ZZ < / property > < property name = "InterchangeTime" > 1727 < / property > < = "InterchangeTrailerControlNumber" > 000000001 property name < / property > < name of property = "InterchangeUsageIndicator" > I < / property > < name of property = "SegmentDelimiter" > 0x0d0x0a < / property > < name of property 'Standard' = > X 12 < / property > < name of property = "SubelementDelimiter" > 0x5c < / property > < / data structures > < / internal-properties > < Segment-ST > < element-143 > < / element-143 > < element-329 > 0001 < / element-329 > < / Segment-ST > < Segment-BIG > < element-373 > 20140313 < / Element-373 > < element-76 > I < / element-76 > < / Segment-BIG > < Segment-TDS > < element-610 > 2 < / element-610 > <. Segment-TDS > < Segment-SE > < element-96 > 4 < / item-96 > < element-329 > 0001 < / item-329 > < / Segment-SE > < / Transaction-810 >

  
  

  
  

  Can anyone suggest what the problem with this payload.
  

  Well, I understood the question.

  The problem is with the validity of the payload (menetioned above .dat file). When I have it analyses using the Oracle Doc editor it is impossible to analyze.

  The underside of payload has worked

  "http://www.edifecs.com/XData/200" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" XDataVersion = "2.0" Standard = 'X 12' Version = "V4010' CreatedDate =" 2014-03 - 18 T 14: 31:36 "CreatedBy ="XEngine_3000"GUID ="{A8C2A4C3-CA21-43BC-A4F4-DA8C8E3D78A8}">00401MarketInc ZZOracleServices ZZIX 120x7e0i0010x5c000000001U00401140318MarketInc ZZsecurity I00OracleServices ZZ1418000000001I have0x0d0x0aX 120x5cOracleServicesMarketIncOracleServices004010T. 1120140318TOMarketIncOracleServices14181004010OracleServices810400018100001810000120140318I'm240001

• 404 error when I try to edit the page in the ice

  I use a browser, go to my page, press Cmd + E, appears the login and the password, fact, then bang! the page, 404 error generic right of the host.

  Thanks for the quick response. I went in .htaccess and removed the line about 404 errors and now my page loaded and I can modify it. BUT this change to the mess of htaccess file me up through other means?

• Problem of validation "Error Message.

  APEX 4.2 I have under 'Treatment of the Page '->' validation' my valdidation rule created with the name "10 validate the report.
  
  My APEX Validation attributes are:
  Type = "return of the boolean function.
  Validation expression 1 = "return rpt_utl_pkg.validate (" my_db_pkg.validate (: p1: p2,: p3: p4,: p5)'");"
  «* (Required value) Error Message "="Error in data".»
  
  Attribute 'when the key "=" SAVE', races of validation when I click on the button SAVE, and the validation logic is inside a plsql function where to start with this code business mistakes:
  

  apex_error.add_error (
          p_message          => 'Message 1',
          p_display_location => apex_error.c_inline_in_notification );
  
  apex_error.add_error (
          p_message          => 'Message 2',
          p_display_location => apex_error.c_inline_in_notification );
  ....

  My plsql function throw successfully these messages of 2 error and those are put in the page header.
  But the problem is that, too, formula "Error in the data" is didsplayed as a 3rd message.
  
  How can I do so that the 3rd message 'Error in data' would not appear?
  I want only the report to display messages:
  
  Message 1
  Message 2
  
  I can't leave the field "* (required value) Error Message" vacuum. And if I put a space character, then it prints but also the 3 rows without text, but still 3rd row from ball symbol is there.

  Charles Roos

  CharlesRoos wrote:
  APEX 4.2 I have being "Processing of Page"--> "Postings" my valdidation rule created with the name "10 validate the report.

  My APEX Validation attributes are:
  Type = "return of the boolean function.
  Validation expression 1 = "return rpt_utl_pkg.validate (" my_db_pkg.validate (: p1: p2,: p3: p4,: p5)'");"
  «* (Required value) Error Message "="Error in data".»

  Instead of return false when there is a validation that turned bad in your function always return true.
  Or in other words, validation that contains the apex_error.add_error functions should always return true.
  This is because as the posting it itself will do an apex_error.add_error when it breaks down that adds unwanted commit message.

  Nicolette

• CFLOOP ERROR "CONTEXT VALIDATION ERROR...".

  I get an error for a cfloop tag that makes no sense.  CONTEXT VALIDATION ERROR for TAG CFLOOP need a closing tag cfloop.

  the problem is that I've matched each open all tags tag is a closing tag. There is a nested table in the page that contains a few other loops that all tags are paired. I drop the table and the page works fine. So I'm confused as to what is causing the error.

  The abrieviated code is below:

  <!-loop through people unique id-->
  < cfoutput >
  < cfloop query = "getIP_peopleItems" > L1 - o <-I GET AN ERROR SAYING the CFLOOP TAG IS NOT CLOSED
  "Context for the cfloop tag validation error.

  <!-another code goes here and works->

  
  < tr bgcolor = "##DBDBDB" >
  < th colspan = "8" > other < /th >
  
  < /tr >
  < b >
  < td colspan = "8" >
  
  <!-IF I REMOVE THE NESTED below TABLE in ITS ENTIRETY I do NOT GET the ERROR.
  IF I COMMENT THE SECTIONS OF THE TABLE, I GET THE 'CONTEXT VALIDATION ERROR FOR CFLOOP TAG'->
  
  < table align = "center" width = "100%" border = "1" cellpadding = "5" cellspacing = "0" summary = 'list of other personal property' > T2 - O
  < tr bgcolor = "# c0c0c0" >
  < scope = "col" th > # < /th > < scope = "col" th > element < /th > < th = 'col' scope > serial number < /th > < th = 'col' scope > IGO Bar Code < /th > < th = 'col' scope > Action < /th >
  < /tr >
  <! - insert another staff propert points - >
  < cfloop query = "getIP_response" > L2 - O
  
  < cfif EQ 2416 question_id and the answer isn't "> I1 - O
  < cfset #response = rep # >
  < cfloop list = index "' #rep # ' = 'i' delimiters =" #chr (13) #"> L3 - O"
  < b >
  < td > < table >
  "< cfloop list =" #i # "index = delimiters 'j ' = ' | ' > L4 - O
  < td > #j # < table >
  < / Cfloop > L4 - C
  < /tr >
  < / cfloop > L3 - C
  < cfelseif question_id EQ 2416 and the answer is ">
  < div align = "center" > < span class = "NoData" > no data found </span > < / div >
  < / cfif > I1 - C
  
  < / cfloop > L2 - C
  < /table > T2 - C
  < table > < /tr >
  < tr bgcolor = "##DBDBDB" >
  < th colspan = "8" > Notes < /th >
  
  < /tr >
  < b >
  < td colspan = "8" > < br > < br > < table >
  
  < /tr >
  < /table >
  < br > < br >

  < hr >
  < / cfloop > L1 - C <-this FARM THE LOOP TAG at THE TOP OF THE PAGE.
  < / cfoutput >

  Anyone have any ideas what is causing the error.  I use this same provision in several different reports without any problem.

  #

  What is wrong with this picture, in the middle of a CFM template?

  --

  Adam

• Houston-27122: during the preparation of the statement SQL error while seeds VO Extension

  Hello

  We are reclassification of 11.5.10 at R12.2.4.

  In 11i, we had an extension of the VO on 'oracle.apps.icx.por.wf.server.ReqLinesNotificationsVO' that works properly. Given that the standard of the VO ReqLinesNotificationsVO got some changes in R12.2.4, I have re implemented the VO extension in R12.2.4.

  I ran the query changed in the database that produces the output without any problem. But at the point where I have deploy the jpx file, I could see the page out error.

  Please help where I am doing wrong. I have attached the newspaper of errors, query VO seeded, query modified VO, VO XML and other relevant records

  Note: I've added two new columns entity & account spending.

  Also, in depth, I see the error below

  # # 0 in detail

  java.sql.SQLSyntaxErrorException: ORA-01722: invalid number

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)

  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)

  at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)

  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)

  at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe (T4CPreparedStatement

  Thank you
  CSK

  All,

  I solved the issue of the use of the fix below,

  @

  Difficulty:

  Change the Style of binding of VO 'Oracle named"to"positional Oracle. " For more details, please refer below link

  http://johnytips.blogspot.com.au/2015/06/OAF-issues-associated-with-vo.html

  Thank you

  CSK

• website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

  website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

  This has happened

  Each time Firefox opened

  is after upgrade to 3.5?

  http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

  You create a new profile and install only the extension Web Developer, as recommended Chris?