on the recovery.... Please help

Similar Questions

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.

  ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.

  We recommend that you reset your C510 HP first. You can perform the reset by following the steps below:

  1. press the "Power button" to activate the product.

  2. with the product, unplug the power cord from the back of the product.

  3. disconnect the power cord from the wall outlet.

  4. wait at least 15 seconds.

  5. plug the power cord into the wall jack.

  6. reconnect the power cord to the back of the product.

  7. If the product does not light by itself, press the Power button to turn it on.

  Once done, print a self-test report by following the next steps:

  1 load plain white paper in the input tray.

  2. from the home screen on the control panel of the product, click "Menu" on the upper left side. A list of menu options screens. 3. click on "Settings" and then click on 'tools '. The maintenance of the printer menu displays.

  4. in the maintenance of the printer menu, click "Printer Status Report". The product prints the report.

  If the report is printed correctly, try again to print your original document.

  If the problem persists, you may need to check the status of documents in the status bar. To do this, follow these steps:

  1. remove the stack of paper from the status bar.

  2. check that the obstacles within the status bar. A flashlight to view the mechanism inside the status bar to make sure that nothing is blocking the paper to engage with the rollers. Even small pieces of paper can cause paper feeding problems. (Important: If any obstruction is detected in the paper path, you need to refer to "Cleaning the rollers" segment at http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken)

  3. to review the status of the paper and then replace any paper torn, dusty, curled, wrinkled, or bent.

  4. ensure that all the papers in the stack are the same size and type. Never charge which coexist types of paper in the tray. The product can only process one type of paper at a time.

  5. press on the stack of paper on a flat surface to align the edges.

  6. make sure that the paper stack does not contain less than 10 and not more than 25 sheets paper.

  (Note: the limitation of the number of documents applies only during the phase of solving problems.) Once the problem is resolved, you can load the tray to its original capacity).

  Once you have checked the status of documents, reload the tray in the following way:

  1. lift output in open position and open the door of the feeder.

  2. slide the width guide to its outermost position paper.

  3. Insert the stack of paper into the paper tray with the short edge forward and the print down side.

  4. adjust the paper width guide so that it rests against the stack of paper.

  5. lower the output tray, and then close the tray door. Once this is done, print again an automatic test report by following the above steps. If this too does not resolve the issue, refer to some more solutions at HP support center link below: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  GuruAid.com

• Windows95 CD-ROM - game Need for DCC Speed-No. pieces found - can not install the game - please help. ___

  Windows 95 CD-CD-ROM-game Need for DCC Speed-No. pieces found - can not install the game - please help.

  ------------------

• put an item into the basket, made an empty recycle bin, need return the item, please help, I did nothing since the drain, so the machine is in the same condition as when I emptied

  put an item into the basket, made an empty recycle bin, need return the item, please help, I did nothing since the drain, so the machine is in the same condition as when I emptied

  If you have xp, you can do system restore

• Lightroom stopped working would cut during use, update would not download through app cc, direct download installs, his record saying is corrupted to lose the battle, please help

  Lightroom has ceased to function and be cut during use, update wouldn't download through app cc, direct download, moved his record saying is corrupted, im losing the battle please help

  reset your preferences -: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  If this fails, uninstall and reinstall

• The space bar has stopped working in text blocks. Iendupwithsentaceslikethis - I have reset the mac, but it is always the case please help!

  Iendupwithsentaceslikethis - I have reset the mac, but it is always the case please help!

  Latest version CC

  Richard

  Solved the problem - I just changed a Chinese document. I copied the milling guide in a new document.

• I bought a single image, and after downloading my image always has the watermark please help.

  I bought a single image, and after downloading my image always has the watermark please help.

  Please follow the following steps

  I bought a stock image and I can't seem to upload the image under a license without the watermark? Please help

• I'm using Dreamweaver CC and tries to install Dw CC (2014) at the first trial, but the problem come when it expired, both my installed dreamweaver has expired, and now I just enjoy the Bill every month without the product, please help me.

  I'm using Dreamweaver CC and tries to install Dw CC (2014) at the first trial, but the problem come when it expired, both my installed dreamweaver has expired, and now I just enjoy the Bill every month without the product, please help me.

  You have more than one Adobe ID and password - for creative cloud and the other for your trial period?

  Nancy O.

• the XML reader - need assistance to change the script, please help

  Hi all, I don't know if this is the right place for this question but I want to change a xml flash drive so that it creates the playlist with the name I want and not the default. Some can tell me please how to change this so that when the player has found songs in the "my_mp3s" folder it creates a named xml playlist

  'mymusic.xml ' instead of the default "audioplaylist.xml".  I tried to edit the script of the player's actions and overwrite changes but it still does not work, here is the code please help. I found this script online.

  Thank you

  Stop();

  / * ALL BUTTONS BELOW ARE MARKED FOR EDITABLE AND DON'T CHANGE, BUT IF YOU KNOW WHAT YOU ARE DOING
  THEN YOU CAN ACTUALLY CHANGE WHAT YOU WANT BUT FOR THIS APP WORKS CORRECTLY ONLY CHANGE IF NECESSARY
  ENTRIES... ONCE YOU HAVE MADE YOUR CHANGES, COPY AND PASTE THIS ENTIRE SCRIPT PAGE IN
  THE FIRST IMAGE OF THE SCENARIO THAT HE RIGHT THE SCRIPT THATS ALREADY THERE.
  The button labels for the XML READER text * /.
  SIDE MENU BUTTONS\\\
  Btn1.buttText.ButtonText.text = "DOWNLOAD FILES"; DO NOT CHANGE
  btn2.buttText.ButtonText.text = "SYSTEM VOLUME"; DO NOT CHANGE
  btn3.buttText.ButtonText.text = 'EDIT PLAYLIST XML'; DO NOT CHANGE
  btn4.buttText.ButtonText.text = "BURN CD"; DO NOT CHANGE
  btn5.buttText.ButtonText.text = "CREATE a FOLDER"; DO NOT CHANGE
  btn6.buttText.ButtonText.text = 'DELETE FILE'; DO NOT CHANGE
  btn7.buttText.ButtonText.text = "CDROM OPEN"; DO NOT CHANGE
  btn8.buttText.ButtonText.text = 'OPEN DVD'; DO NOT CHANGE
  btn9.buttText.ButtonText.text = "FTP CLIENT"; DO NOT CHANGE
  btn14.buttText.ButtonText.text = "VIEW PLAYLIST"; DO NOT CHANGE
  btn23.buttText.ButtonText.text = "INFO"; DO NOT CHANGE
  btn25.buttText.ButtonText.text = 'HELP '; DO NOT EDIT
  btn26.buttText.ButtonText.text = 'HELP MDM'; DO NOT CHANGE
  LOW BTNS
  btn19.buttText.ButtonText.text = "OPEN TRAY"; DO NOT CHANGE
  btn20.buttText.ButtonText.text = 'CLOSE CD TRAY'; DO NOT CHANGE
  btn21.buttText.ButtonText.text = "OPEN DVD TRAY"; DO NOT CHANGE
  btn22.buttText.ButtonText.text = "CLOSE DVD TRAY"; DO NOT CHANGE

  Here ARE the FUNCTIONS THAT CAN BE CHANGED, BUT THAT THOSE BRAND 'YOU CAN CHANGE this PATH' are sure to change
  MY DOWNLOAD FILES
  Btn1.onRelease = function() {}
  MDM. Dialogs.BrowseFile.filterList = "MP3 files | * .mp3 ';
  MDM System.exec ("E:\\My Music\\").    Path to the download of the file //YOU CAN CHANGE THIS path
  }
  SYSTEM VOLUME / / / DO NOT CHANGE
  btn2.onRelease = function() {}
  MDM. System.exec("sndvol32.exe");    System volume .exe
  }
  EDITING XML PLAYLIST / / / DO NOT CHANGE
  btn3.onRelease = function() {}
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\audiolist2.xml");    XML list
  }
  BURN CD / / YOU CAN CHANGE THIS PATH
  btn4.onRelease = function() {add your way here to your burning nero for example software
  MDM. System.exec (MDM. System.Paths.programFiles+"Nero\\nero.exe");
  }
  CREATE FOLDER / / / DO NOT CHANGE
  btn5.onRelease = function() {}
  MDM FileSystem.makeFolderUnicode ("C:\\Program Files\\Mgamerz\\Burn").    Creates a working folder for burning mp3s
  }
  DELETE FOLDER / / / DO NOT CHANGE
  btn6.onRelease = function() {///Deletes working folder if you want to remove it
  MDM. FileSystem.deleteFolder ("C:\\Program Files\\Mgamerz\\Burn", "ask", "Are you sure");
  }
  OPEN CDROM / / YOU CAN CHANGE THIS PATH
  btn7.onRelease = function() {///Opens change of cdrom drive letter to match your pc
  MDM System.exec("I:\\."); "
  }
  OPEN DVDROM / / YOU CAN CHANGE THIS PATH
  btn8.onRelease = function() {///Opens changing the letter to match your pc dvdrom drives
  MDM System.exec("I:\\."); "
  }
  FTP CLIENT / / YOU CAN CHANGE THIS PATH
  btn9.onRelease = function() {///File path to your ftp software (I use here the cover page)}

  
  MDM. System.exec (MDM. System.Paths.programFiles + "Microsoft FrontPage Bar\\Office\\Microsoft Office\\Office10\\Shortcut"); "
  }
  Buttons in the header at the top

  DRIVE C: / / / DO NOT EDIT
  btn10.onRelease = function() {///Opens to the top of drive c: for navigation
  MDM. System.exec (MDM. System.Paths.programFiles+"\\");
  }
  * btn11.onRelease = function() {///Opens to the top of the unit for navigation
  MDM System.exec("D:\\."); "    YOU CAN CHANGE THIS PATH
  }*/
  MY DOCUMENTS / / / NOT EDIT
  btn12.onRelease = function() {///Opens my documents for navigation}
  MDM. Dialogs.BrowseFile.filterList = "MP3 files | * .mp3 ';
  MDM. Dialogs.BrowseFile.show ("my Documents\\");
  }
  MP3 FILE / / / DO NOT CHANGE THE
  btn13.onRelease = function() {//main directory for mp3 files
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\my_mp3s\\");
  }
  VIEW PLAYLIST / / / DO NOT CHANGE
  btn14.onRelease = function() {///View playlist as a text file
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\my_mp3s\\mp3.t xt");
  }
  UPDATE XML FILE / / / DO NOT CHANGE
  btn15.onRelease = function() {///Creates xml playlist once new mp3s have been added
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\audiolist2.xml");
  }
  MINIMIZE BUTTON
  * btn16.onRelease = function() {//Minimizes application
  MDM. Application.Minimize (///DO) NOT EDIT
  }*/
  CLOSE BUTTON
  * btn17.onRelease = function() {///Closes application
  MDM. Application.Exit ('ask', ' are you sure you want to go out to? ") DO NOT EDIT
  }*/
  SCREEN CAPTURE DEVICE / / / DO NOT CHANGE
  btn18.onRelease = function() {///Screen capture sofdtware
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\apps\\Capture screen Studio\\css.exe");
  }
  OPEN CDROM TRAY / / YOU CAN CHANGE THIS PATH
  btn19.onRelease = function() {}
  MDM System.openCDTray ("I").
  }
  CDROM TRAY CLOSE / / YOU CAN CHANGE THIS PATH
  btn20.onRelease = function() {//Closes cdrom tray
  MDM System.closeCDTray ("I").
  }
  OPEN DVDROM PLATEAU / / YOU CAN CHANGE THIS PATH
  btn21.onRelease = function() {//Opens dvdrom
  MDM System.openCDTray ("H").
  }
  CLOSE TRAY DVDROM / / YOU CAN CHANGE THIS PATH
  btn22.onRelease = function() {//Closes dvdrom plateau
  MDM System.closeCDTray ("H").
  }

  * btn23.onRelease = function() {//DO NOT EDIT
  nextFrame();
  }*/
  HELP / / DO NOT EDIT
  btn25.onRelease = function() {//Closes dvdrom plateau
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\help.exe");
  }
  HELP OF MDM / / DO NOT EDIT
  btn26.onRelease = function() {//Closes dvdrom plateau
  MDM. System.exec (MDM. System.Paths.programFiles + "MDM helps 2.5 file\\MDM 2.5 UserManual.chm"); "
  }

  use:

  / * ALL BUTTONS BELOW ARE MARKED FOR EDITABLE AND DON'T CHANGE, BUT IF YOU KNOW WHAT YOU ARE DOING
  THEN YOU CAN ACTUALLY CHANGE WHAT YOU WANT BUT FOR THIS APP WORKS CORRECTLY ONLY CHANGE IF NECESSARY
  ENTRIES... ONCE YOU HAVE MADE YOUR CHANGES, COPY AND PASTE THIS ENTIRE SCRIPT PAGE IN
  THE FIRST IMAGE OF THE SCENARIO THAT HE RIGHT THE SCRIPT THATS ALREADY THERE.
  The button labels for the XML READER text * /.
  SIDE MENU BUTTONS\\\
  Btn1.buttText.ButtonText.text = "DOWNLOAD FILES"; DO NOT CHANGE
  btn2.buttText.ButtonText.text = "SYSTEM VOLUME"; DO NOT CHANGE
  btn3.buttText.ButtonText.text = 'EDIT PLAYLIST XML'; DO NOT CHANGE
  btn4.buttText.ButtonText.text = "BURN CD"; DO NOT CHANGE
  btn5.buttText.ButtonText.text = "CREATE a FOLDER"; DO NOT CHANGE
  btn6.buttText.ButtonText.text = 'DELETE FILE'; DO NOT CHANGE
  btn7.buttText.ButtonText.text = "CDROM OPEN"; DO NOT CHANGE
  btn8.buttText.ButtonText.text = 'OPEN DVD'; DO NOT CHANGE
  btn9.buttText.ButtonText.text = "FTP CLIENT"; DO NOT CHANGE
  btn14.buttText.ButtonText.text = "VIEW PLAYLIST"; DO NOT CHANGE
  btn23.buttText.ButtonText.text = "INFO"; DO NOT CHANGE

  
  btn25.buttText.ButtonText.text = 'HELP '; DO NOT EDIT
  btn26.buttText.ButtonText.text = 'HELP MDM'; DO NOT CHANGE
  LOW BTNS
  btn19.buttText.ButtonText.text = "OPEN TRAY"; DO NOT CHANGE
  btn20.buttText.ButtonText.text = 'CLOSE CD TRAY'; DO NOT CHANGE
  btn21.buttText.ButtonText.text = "OPEN DVD TRAY"; DO NOT CHANGE
  btn22.buttText.ButtonText.text = "CLOSE DVD TRAY"; DO NOT CHANGE

  Here ARE the FUNCTIONS THAT CAN BE CHANGED, BUT THAT THOSE BRAND 'YOU CAN CHANGE this PATH' are sure to change
  MY DOWNLOAD FILES
  Btn1.onRelease = function() {}
  MDM. Dialogs.BrowseFile.filterList = "MP3 files | * .mp3 ';
  MDM System.exec ("E:\\My Music\\").    Path to the download of the file //YOU CAN CHANGE THIS path
  }
  SYSTEM VOLUME / / / DO NOT CHANGE
  btn2.onRelease = function() {}
  MDM. System.exec("sndvol32.exe");    System volume .exe
  }
  EDITING XML PLAYLIST / / / DO NOT CHANGE
  btn3.onRelease = function() {}
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\audiolist2.xml");    XML list
  }
  BURN CD / / YOU CAN CHANGE THIS PATH
  btn4.onRelease = function() {add your way here to your burning nero for example software
  MDM. System.exec (MDM. System.Paths.programFiles+"Nero\\nero.exe");
  }
  CREATE FOLDER / / / DO NOT CHANGE
  btn5.onRelease = function() {}
  MDM FileSystem.makeFolderUnicode ("C:\\Program Files\\Mgamerz\\Burn").    Creates a working folder for burning mp3s
  }
  DELETE FOLDER / / / DO NOT CHANGE
  btn6.onRelease = function() {///Deletes working folder if you want to remove it
  MDM. FileSystem.deleteFolder ("C:\\Program Files\\Mgamerz\\Burn", "ask", "Are you sure");
  }
  OPEN CDROM / / YOU CAN CHANGE THIS PATH
  btn7.onRelease = function() {///Opens change of cdrom drive letter to match your pc
  MDM System.exec("I:\\."); "
  }
  OPEN DVDROM / / YOU CAN CHANGE THIS PATH
  btn8.onRelease = function() {///Opens changing the letter to match your pc dvdrom drives
  MDM System.exec("I:\\."); "
  }
  FTP CLIENT / / YOU CAN CHANGE THIS PATH
  btn9.onRelease = function() {///File path to your ftp software (I use here the cover page)}
  MDM. System.exec (MDM. System.Paths.programFiles + "Microsoft FrontPage Bar\\Office\\Microsoft Office\\Office10\\Shortcut"); "
  }
  Buttons in the header at the top

  DRIVE C: / / / DO NOT EDIT
  btn10.onRelease = function() {///Opens to the top of drive c: for navigation
  MDM. System.exec (MDM. System.Paths.programFiles+"\\");
  }
  * btn11.onRelease = function() {///Opens to the top of the unit for navigation
  MDM System.exec("D:\\."); "    YOU CAN CHANGE THIS PATH
  }*/
  MY DOCUMENTS / / / NOT EDIT
  btn12.onRelease = function() {///Opens my documents for navigation}
  MDM. Dialogs.BrowseFile.filterList = "MP3 files | * .mp3 ';
  MDM. Dialogs.BrowseFile.show ("my Documents\\");
  }
  MP3 FILE / / / DO NOT CHANGE THE
  btn13.onRelease = function() {//main directory for mp3 files
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\my_mp3s\\");
  }
  VIEW PLAYLIST / / / DO NOT CHANGE
  btn14.onRelease = function() {///View playlist as a text file
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\my_mp3s\\mp3.t xt");
  }
  UPDATE XML FILE / / / DO NOT CHANGE
  btn15.onRelease = function() {///Creates xml playlist once new mp3s have been added
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\mymusic.xml");
  }
  MINIMIZE BUTTON
  * btn16.onRelease = function() {//Minimizes application
  MDM. Application.Minimize (///DO) NOT EDIT
  }*/
  CLOSE BUTTON
  * btn17.onRelease = function() {///Closes application
  MDM. Application.Exit ('ask', ' are you sure you want to go out to? ") DO NOT EDIT
  }*/
  SCREEN CAPTURE DEVICE / / / DO NOT CHANGE
  btn18.onRelease = function() {///Screen capture sofdtware
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\apps\\Capture screen Studio\\css.exe");
  }
  OPEN CDROM TRAY / / YOU CAN CHANGE THIS PATH
  btn19.onRelease = function() {}
  MDM System.openCDTray ("I").
  }
  CDROM TRAY CLOSE / / YOU CAN CHANGE THIS PATH
  btn20.onRelease = function() {//Closes cdrom tray
  MDM System.closeCDTray ("I").
  }
  OPEN DVDROM PLATEAU / / YOU CAN CHANGE THIS PATH
  btn21.onRelease = function() {//Opens dvdrom
  MDM System.openCDTray ("H").
  }
  CLOSE TRAY DVDROM / / YOU CAN CHANGE THIS PATH
  btn22.onRelease = function() {//Closes dvdrom plateau
  MDM System.closeCDTray ("H").
  }

  * btn23.onRelease = function() {//DO NOT EDIT
  nextFrame();
  }*/
  HELP / / DO NOT EDIT
  btn25.onRelease = function() {//Closes dvdrom plateau
  MDM. System.exec (MDM. System.Paths.programFiles+"Mgamerz\\help.exe");
  }
  HELP OF MDM / / DO NOT EDIT
  btn26.onRelease = function() {//Closes dvdrom plateau
  MDM. System.exec (MDM. System.Paths.programFiles + "MDM helps 2.5 file\\MDM 2.5 UserManual.chm"); "
  }

• My hard drive will not be displayed in the Finder, please help!

  I tried several options to try to solve my problem, but it is not good. I have an external hard drive Seagate 2 to. I used it for about 6 months, but one day it just does not appear in the Finder more. I checked in disk utility and it shows up there, but it is labeled as "Uninitialized 2 TB Windows NT specifien". It seems strange, that it now says Windows when I used it fine on my Mac in the past. It won't let me hit mount either. Please help me.

  Thank you.

  Did you have the Seagate utilities or any installed third-party NTFS software? The drive has never been formatted to support OS X?

  Connect the external drive and OS X Terminal, after the release of

  diskutil list

• I used 128 usd with my couse accident I didn't know my dads credit card has been connected, I tried glitch a game bud I used my dads credit card money was connected couse I bought something on a game and I need the money please help me

  I used 129 usd with couse anaccident I didn't know that my dads credit card has been connected

  It has been connected couse I used on another game, then its

  already connected so I need money I have not used anything else for I have buyed and I want my dads back money / my money

  Please help me

  Nobody here can help you. We are just other users as you are. You can contact the support iTunes Store here, but they are not obliged to refund you, as all sales are final in Apple digital stores. Explain what you were doing and ask for their help.

  https://getsupport.Apple.com/

• I forgot my password to icloud how can I change the password please help

  Hello team

  Please help me

  I use apple 4S and I forgot the passward of my cloud i

  How can I reset it.

  I read your conversation on this subject but in my phone does not show sing option so how can I remove the password

  and id

  If you forgot your Apple ID - Apple Support password.

  FYI: you don't talk with Apple here. It is a forum where users help other users

  with technical issues. Presence of Apple is minimal and asked to see the terms and conditions of

  Use are met.

  If you are the original purchaser of the iPhone and can prove it with a reception (from Apple

  or Apple iPhone authorized distributor) showing the serial number of the iPhone, which take

  proof of purchase and the iPhone to an Apple physical store, where they can help you.

• How repair my iphone 6s hung in camera I can't able to access on the other and I can't able to swtich offf if sleep button the tank please help me

  I took a few pictures without unlocking my iphone 6 s after that he stuck behind closed doors himself and tactile assitive works but can't go to the home page in my laptop, I tried to change my sleep the mobile tank button that works also not I'm not what to do. Please help me solve this problem.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support

• Micro does not work after recovery please help

  After a virus in my computer, I did the recovery on my pc my dynamic microphone no longer works but the virus b4 it worked I tried everything to fix it and this is not possible and I just tested the microphone on my friends pc works very well I don't know where is the problem if someone can help im using windows xp...

  Did you try to increase the volume of the microphone you?

  Usually, HP recovery work out any software problem, have you chosen factory installation option?

  If the installation of the factory can solve your problem with the microphone, you may have a hardware problem.

• Problem with the installation of the assembly please help

  I get this messege and he says that the problem is "Microsoft.VC90.CRT, version ="9.0.21022.8", publicKeyToken ="1fc8b3b9a1e18e3b"processorArchitecture ="x 86", type ="win32

  Please help me with this problem because I can not install programs or updates

  Hi killerinthesand,

  What version of Windows are you using?
  Please check this thread on the forum for Games for Windows.  It is a similar problem with the same error as yours.  Try the steps you propose to see one of them will help to solve your problem.  This is most likely a problem to produce a Games for Windows client.  Have you installed this recently too?

  http://forums.gamesforwindows.com/t/566.aspx

  Let us know the results, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.