On the screen and the keys FN + keys do not work after format
I formatted my whole HARD drive and re-installed windows 7 pro. After doing the format and re - install the on screen does not appear when I adjust the volume or toggle the caps lock as it has already done before I have re-installed. I installed the driver hotkey display on the screen, display driver interface, run the utility to update Lenovo repeatedly, installed all windows updates. Y at - it somewhere where I need to activate OSD (on screen display)? I don't know that it's just something small, that I forget but if anyone has any help please let me know! Sorry if this has already been posted, I tried searching before you make a post but had no chance.
A couple of other things to check:
1. look in the Task Manager, is TPONSCR.exe and TPOSDSVC.exe running?
2. look in Control Panel Services, is the "On Screen Display" install and start service?
Tags: ThinkPad Notebooks
Similar Questions
-
I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.
You can have:
- Choose the Mode "full screen" or
- unchecked toolbars
The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).
If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:
- Right-click in the empty space at the end of the tab bar
- Press the ALT key or the F10, the poster Menu bar, click View > toolbars
- Firefox button > Options
- Hold down the ALT key and type the letters of the keyboard V T
- See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
- Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
- Also see-> http://kb.mozillazine.org/Toolbar_customization
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
How can I install CS5 on a replacement/new laptop? I paid full price in 2011 and the key (and it appears in my Adobe account under products), but it was a downloaded product and I can't find a download of this online version and my key does not work in CC.
Your key does not work in CC, this is a newer version and would require a new purchase.
Downlaod CS5 here.
-
Satellite L555 - 10K - FN keys do not work after the installation of Windows 10
I installed 10 64-bit Windows (original was Windows 7 64-Bit)
My FN keys do not work after the installation of Windows 10.
There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
Do you know any helpHello
I think that your model of laptop is not possible to Win10.
Check it please https://forum.toshiba.eu/showthread...mation-website -
Satellite P855 - function keys do not work after the upgrade to Windows 10
Function keys do not work after the upgrade to Windows 10
I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
Anyone know when and if it will be available?
Thank youI'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.
-
Hi, I'm new to CS6 and worked through the book of Adobe After Effects. Some of the shortcuts do not work for me, probably because I use a German keyboard. In Chapter 11, I have problems because I need to select a layer, go to a specific time and then set to the point, but the [key does not work. Does anyone know a German equivalent or another way to set the point to? Otherwise, if I look at the colored bar in the timeline representing the layer that I want to put a point, can I get the same effect by dragging the edge of the colored bar until I reached the time limit? Or that fails to preserve the relationship of all images existing keys, etc. that I have implemented for a layer in a way that the [key would be? Grateful for any advice.
Shift + o/a, o/a and so on. Also kann man mit Sttrg + shift + D die ebony einfach und den Teil parts, den man nicht parish, löschen. Ansonsten einfach evil die die Shortcuts.txt Datei deepening und oder das KeyEd Up Script dafur use squad.
Mylenium
-
I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working. I can't get past this login screen. I have seen a lot of messages that say to insert the disc of vista and re - install. I tried to do, and nothing happened when I put the disc.
Dell recovery options:
Above is Dell to reinstall Vista from the DVD on your computer.
And that way if you have a recovery partition on your hard drive.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator
See you soon.
Mick Murphy - Microsoft partner
-
Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.
Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
(If you use it, switch to the default theme).
- You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. It might help others who have the same problem.
Thank you.
-
I have laptop HP Envy M6 Tx 1216 and brightness keys do not work.
I have laptop HP Envy M6 Tx 1216 and brightness keys do not work.
Hello
Try to use Recovery Manager to reinstall your graphics driver of origin AMD - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.
After reinstalling, restart the laptop.
Kind regards
DP - K
-
Page up, page down, home and end keys do not work.
Page up, page down, home and end keys do not work.
There is a fix that has worked for others in https://bugzilla.mozilla.org/show_bug.cgi?id=640587
This problem addressed in Firefox 9 which was distressing for most owners of Asus. -
FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BE)
FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BEING) - not able to use the Beats speakers. The software updates that I have to install?
Hi Jim,.
Open windows control panel, click the drop-down list box "view by" at the top right of the window and select "large icons" - you see an entry for Beats Audio in the list and if you do, it's actually launched if clicked?
Kind regards
DP - K
-
Mouse and multimedia keys does not work without the fn key
Lenovo G500
model without 20236
Windows 7 sp1
the mouse and the multimedia keys does not work without the fn key. Help, please
[Original title: Lenovo g 500]
Hello
Check with Lenovo support, their drivers and documentation online and ask for their
Forums about known problems.Support from Lenovo and downloads
http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.doLenovo forums
http://forums.Lenovo.com/ I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
On the keyboard volume and Mute keys do not work
I have an Asus K43SD (windows 8). I had downloaded all the drivers, but there is only 1 problem. The laptop works very well except the mute, turning up and turn down the keys on the keyboard. They do not work and I have to use the volume icon to put upwards or downwards. I would really appreciate anyone who has the solution. I've looked everywhere and I'm ready to throw the laptop with the cat! LOL thanks a lot
Moved from feedback
Original title: problem
Contact ASUS support.
-
Satellite L670 Fn keys do not work after the upgrade to Windows 10
Hello
I ve upgraded my Win7 L670 to Win10. After upgrade do not work key Fn. is it possible to recover the functionality of these buttons in Windows 10.
Wolfgang
Hello
Each cell function requires special tools and utilities.
In the case of FN keys, Toshiba software controls this feature.But as far as I know that the Satellite L670 won't get any utility Windows 10 so probably this key will not work running Win 10.
Here the details on the 10 Windows upgrade:
https://Forum.Toshiba.EU/showthread.php?83832 -
Satellite M30-S350. Fn keys do not work after reinstalling the operating system
I reinstalled the system on my laptop and now the Fn keys do not work. How do adjust me them? And yet... How to disconnect the touchpad?
Hello
It seems that what he is an American unit and was designed specially for the American market.
But have you used the Toshiba Recovery CD?
If this isn't the case, then you must install all the drivers Toshiba and utilities in the correct order.
Chipset utility
common modules
graphic driver
etc.The FN keys supports different function. To use these options, you will need several drivers. For example, use the FN + F5 (the display switching), to the Toshiba Hotkey Utility to display the devices & Toshiba display device change Utility and toggle the Touchpad to install Toshiba Touchpad enable/disable utility
As you can see it good drivers are needed. Please visit the Toshiba us and download the right driver for this laptop
Maybe you are looking for
-
Sometimes, all of the newly added bookmarks disappear when you restart firefox. 1 tried to rebuild the places database by removing the Places.sqlite. 2 Places.sqlite is not write protected. 3 tried reseting all browser.places preferences in about: co
-
Safari version 9.0.3, El Capitan 10.11.3 Earlier today, I moved a folder (named Music Making) in my favorites, but then when I opened it in its new location all the bookmarks that were in the folder disappeared. To recover bookmarks, I replaced the S
-
icons Windows stuck at one place in desktop
Hi friends, I am on pc windows 7, when I'm trying to drag an icon to another location in the office, it does not move on the contrary it stucks at the same place, help me why this problem occur? and what to do to solve it? Please can someone help me.
-
GPS coordinates of pictures is not displayed
Right click on the thumbnails of the pictures and selecting Properties > details does not display GPS coordinates of the photos. Not only the data, but the data field itself. And that's for each photo, even those taken on my own phone with the sett
-
Save the configuration to ASA 5505
Hi all, I have this problem, I save the configuration to the ASA 5505 help RAM or using the copy, run start but whe I unplug the power cord and plug it back to the ASA gets its default factory configuration... so what I do is a copy start run to get