Save the configuration to ASA 5505

Hi all, I have this problem, I save the configuration to the ASA 5505 help RAM or using the copy, run start but whe I unplug the power cord and plug it back to the ASA gets its default factory configuration... so what I do is a copy start run to get the active configuration...

Why is it so? even if I saved the config to Flash... greetings!

You have bad start to register:

Please follow the following document:

http://www.Cisco.com/en/us/docs/security/ASA/asa71/configuration/guide/trouble.html#wp1062992

You must set the default value 0 x 1

___

HTH. Please rate this post if this has been helpful. If it solves your problem, please mark this message as "right answer".

Tags: Cisco Security

Similar Questions

Model of savings: it does not save the configurations of margin

I am trying to save a document as a template, to save my master page and styles. But when I save it it does not save the configurations of margin. The document a. 875 "margins left and right, but when I save the document as a template, it saves the margins left and right 1". I have adjustments to market. Do not know what to do...

That's ok. That's how we learn better - try something and see why it does not work.

How to accompany the IDS in ASA 5505 and 5520?

Dear All;

We have the following configuration of HW for the ASA 5505 and ASA 5520, we add the functionality of system of detection of Intrusion (IDS) to the two ASA. My question is: what are the modules required to support this function, and what is the deference between IPS and IDS, fact the same Module both the feature?

Part number:	Description	QTY.
ASA5505-BUN-K9	ASA 5505 appliance with SW 10 users, 8 ports, 3DES/AES	1
CON-SNT-AS5BUNK9	SMARTNET 8X5XNBD ASA5505-BUN-K9	1
SF-ASA5505 - 8.2 - K8	ASA 5505 Series Software v8.2	1
CAB-AC-C5	Power supply cord Type C5 U.S.	1
ASA5500-BA-K9	ASA 5500 license (3DES/AES) encryption	1
ASA5505-PWR-AC	ASA 5505 power adapter	1
ASA5505-SW-10	ASA 5505 10 user software license	1
SSC-WHITE	ASA 5505 hood SSC of the location empty	1
ASA-ANYCONN-CSD-K9	ASA 5500 AnyConnect Client + Cisco Security Office software	1

Part number:	Description	QTY.
ASA5520-BUN-K9	ASA 5520 appliance with SW HA, 4GE + 1FE, 3DES/AES	2
CON-SNT-AS2BUNK9	SMARTNET 8X5XNBD ASA5520 w/300 VPN Prs 4GE + 1FE3DES/AES	2
ASA5520-VPN-PL	ASA 5520 VPN over 750 IPsec User License (7.0 only)	2
ASA-VPN-CLNT-K9	Cisco VPN Client (Windows Solaris Linux Mac) software	2
SF - ASA - 8.2 - K8	ASA 5500 Series Software v8.2	2
CAB - ACU	Power supply cord (UK) C13 BS 1363 2.5 m	2
ASA-180W-PWR-AC	Power supply ASA 180W	2
ASA5500-BA-K9	ASA 5500 license (3DES/AES) encryption	2
ASA-ANYCONN-CSD-K9	ASA 5500 AnyConnect Client + Cisco Security Office software	2
SSM-WHITE	ASA/IPS SSM hood of the location	2

Thanks in advance.

Rashed Ward.

Okay, I was not quite correct in my first post.

These modules - modules only available for corresponding models of ASA.

They all can act as IPS (inline mode) or IDS ("Promiscuous" mode), depending on how you configure your policies.

When acting as IPS, ASA redirects all traffic through the module, then all the traffic is inspected and can be dropped inline if a signature is triggered.

When she acts as an ID, ASA a few exemplary traffic is the module for inspection, but the actual traffic is not affected by the module, as it's not inline in this case.

In addition, these modules can be both comdination. That is part of the traffic can be inspected "inline", when some other (more sensitive) traffic can be inspected in promiscuous mode.

To better understand, familiarize themselves with this link:

http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/modules_ips.html

which product is right for the ssl vpn: asa 5505 cisco 1841 or

Hello

I want to install an outside link management related so that we can ssh to our cisco devices and microsoft RDP toour servers. It's my configuration (based on what I know):

Internet > DSL modem > ASA 5505 > management CONSOLES SWITCH > SWITCH CISCO or Windwos Server

or

Internet > 1841 with DSL HWIC > management CONSOLES SWITCH > SWITCH CISCO or Windwos Server

My questions are:

Should I go for ASA or 1841 router?

What options is better? and ASA will do the job?

Are there any technical support prior to purchase of products in Australia? I need technical advice on the choice of the right products, not justs eiling me products.

Hello

Its strongly suggested to go with ASA 5505 in the first place, it is supposed to feature for the main functionality of ssl vpn server from 1841 which has this feature to be a vpn server.

ASDM also gives you the freedom to config box on your own based on your condition.

regds

Can save the configuration when running VI, but not file not when running EXE

Hello

I have attached a file zip containing a LabVIEW project as well as a built EXE.

The program will load up the numerical value of the file config in both cases, but it will only write the configuration file when it is executed as a VI, not as an executable file. If I don't use the computer of JKI State, I do not think I see this problem, so I think it's the order in which the program quits? I tried to disable the Panel before closing, but that did not always help.

Reading configuration file is made in the case of "Data - initialize" and the config file for writing in the case of 'Cleaning up' -.

It seems that the difference between the run-time and development environment behavior is the Close event of front panel. It's in Dev mode, you do not go to the front > close State, but you don't have at run time. Try to run your cleanup command before the command close to see if that fixes it. If you close the front panel, the values could be recovered, VI OpenG has not all the values to get more because they have left the memory.

If the Panel should be closed more quickly, but you need to hide the front panel without the closing, you can use the FP. Open invoke node with a contribution of the State of "hidden". This will hide the front panel while keeping open and then the Panel will always close end when your application terminates.

is there a way to save the configuration in save for web?

Hello
I am the latest version under cc 2015.1, camera raw, it's all updates, 10 64-bit windows pro
I used to use ave for the web to upload picture to host image
Well, when I select file-> save for web-> legacy
is there a way to set the zoom ratio to adapt it to the discovered ?
It is always 100%
I tried to save the settings, but I do not register a zoom rate
Thank you

Hi Giovannivolonte,

It is impossible for save zoom ratio in save for web, as far as I know.

You need to change this setting.

Dr. Browns 2.0.4 not save the configuration of etc folder destinations?

before you upgrade to CS5, I've been using Dr. Browns 2.0.3 and CS4, the menu would save destination and file settings, but with the current 2.0.4 is not. Is there any prefs associated with this script I should trash or do the new version not save these settings?
Thank you

The script records the user's preferences when he finished a race. So unless you stop the script it should save the destination folder. It could be that the file of perference is incorrect. You can find it in the Adobe Photoshop CS5 Settings folder under the name Dr. Brown 1-2-3 Process.xml.

Cannot find the next jump - ASA 5505 VPN routing l2l

We have a 5505 (soon to be replaced by two 5515-x) firewall with two VPN l2l.

"Were trying to allow a remote site traffic flow through the other remote site but the syslog shows."

10.5.25.4

172.16.10.10

Could not locate the next hop for ICMP outside:10.5.25.4/1 to inside:172.16.10.10/0 routing

Config is less than

ASA Version 8.4 (3)

names of

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

interface Ethernet0/1

interface Ethernet0/2

interface Ethernet0/3

interface Ethernet0/4

interface Ethernet0/5

interface Ethernet0/6

<--- more="" ---="">

interface Ethernet0/7

switchport access vlan 10

interface Vlan1

nameif inside

security-level 100

allow-ssc-mgmt

IP 10.5.19.254 255.255.255.0

interface Vlan2

WIMAX Interface Description

nameif outside

security-level 0

IP address x.247.x.18 255.255.255.248

passive FTP mode

clock timezone GMT 1

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

network guestwifi object

10.1.110.0 subnet 255.255.255.0

<--- more="" ---="">

network of the NETWORK_OBJ_10.5.19.0_24 object

10.5.19.0 subnet 255.255.255.0

network of the NETWORK_OBJ_10.5.31.0_24 object

10.5.31.0 subnet 255.255.255.0

network of the NETWORK_OBJ_172.16.0.0_16 object

subnet 172.16.0.0 255.255.0.0

the object DS365-Cloud network

172.16.10.0 subnet 255.255.255.0

Description DS365-Cloud

network of the object to the inside-network-16

10.5.0.0 subnet 255.255.0.0

atanta network object

10.5.16.0 subnet 255.255.255.0

Atanta description

network guest_dyn_nat object

10.5.29.0 subnet 255.255.255.0

network of the NETWORK_OBJ_172.16.254.0_25 object

subnet 172.16.254.0 255.255.255.128

network of the NETWORK_OBJ_10.5.16.0_20 object

subnet 10.5.16.0 255.255.240.0

network of the NETWORK_OBJ_10.5.16.0_26 object

255.255.255.192 subnet 10.5.16.0

network of the LDAP_DC7 object

Home 10.5.21.1

<--- more="" ---="">

LDAP description

network c2si object

range 10.5.21.180 10.5.21.200

network of the NETWORK_OBJ_10.5.25.0_24 object

10.5.25.0 subnet 255.255.255.0

object-group network rfc1918

object-network 192.168.0.0 255.255.0.0

object-network 172.16.0.0 255.255.240.0

object-network 10.0.0.0 255.0.0.0

the DM_INLINE_NETWORK_1 object-group network

object-network 10.5.19.0 255.255.255.0

network-object 10.5.20.0 255.255.254.0

object-network 10.5.22.0 255.255.255.0

object-network 10.5.30.0 255.255.255.0

object-network 192.168.100.0 255.255.255.0

the Sure_Signal object-group network

network-object x.183.x.128 255.255.255.192

network-host x.183.133.177 object

network-host x.183.133.178 object

network-host x.183.133.179 object

network-host x.183.133.181 object

network-host x.183.133.182 object

the LDAP_source_networks object-group network

network-object 135.196.24.192 255.255.255.240

<--- more="" ---="">

object-network 195.130.x.0 255.255.255.0

network-object x.2.3.128 255.255.255.192

network-object 213.235.63.64 255.255.255.192

object-network 91.220.42.0 255.255.255.0

object-network 94.x.240.0 255.255.255.0

object-network 94.x.x.0 255.255.255.0

the c2si_Allow object-group network

host of the object-Network 10.5.16.1

host of the object-Network 10.5.21.1

network-object object c2si

the DM_INLINE_NETWORK_2 object-group network

network-object 10.5.20.0 255.255.254.0

object-network 10.5.21.0 255.255.255.0

object-network 10.5.22.0 255.255.255.0

object-network 10.5.29.0 255.255.255.0

network-object, object NETWORK_OBJ_10.5.19.0_24

the DM_INLINE_NETWORK_3 object-group network

object-network 10.5.19.0 255.255.255.0

network-object 10.5.20.0 255.255.254.0

object-network 10.5.21.0 255.255.255.0

object-network 10.5.22.0 255.255.255.0

atanta network-object

the DM_INLINE_NETWORK_4 object-group network

network-object 10.5.20.0 255.255.254.0

<--- more="" ---="">

object-network 10.5.21.0 255.255.255.0

object-network 10.5.22.0 255.255.255.0

object-network 10.5.23.0 255.255.255.0

object-network 10.5.30.0 255.255.255.0

network-object, object NETWORK_OBJ_10.5.19.0_24

atanta network-object

network-object DS365-Cloud

inside_access_in list extended access permit tcp any eq 50 Sure_Signal object-group

inside_access_in list extended access permit tcp any object-group Sure_Signal eq pptp

inside_access_in list extended access permits will all object-group Sure_Signal

inside_access_in list extended access permit udp any eq ntp Sure_Signal object-group

inside_access_in access list extended icmp permitted no echo of Sure_Signal object-group

inside_access_in list extended access permit udp any eq 50 Sure_Signal object-group

inside_access_in list extended access permit udp any eq Sure_Signal object-group 4500

inside_access_in list extended access permit udp any eq isakmp Sure_Signal object-group

inside_access_in of access allowed any ip an extended list

255.255.0.0 allow access list extended ip 10.5.0.0 clientvpn 10.5.30.0 255.255.255.0

access-list extended BerkeleyAdmin-clientvpn ip 10.5.0.0 allow 255.255.0.0 10.5.30.0 255.255.255.0

IP 10.5.21.0 allow to Access-list BerkeleyUser-clientvpn extended 255.255.255.0 10.5.30.0 255.255.255.0

outside_cryptomap extended access list permit ip object inside-network-16 10.5.25.0 255.255.255.0

access extensive list ip 10.5.29.0 guest_access_in allow 255.255.255.0 any

state_bypass allowed extended access list tcp 192.168.100.0 255.255.255.0 10.5.30.0 255.255.255.0 connect

state_bypass allowed extended access list tcp 10.5.30.0 255.255.255.0 192.168.100.0 255.255.255.0 connect

state_bypass allowed extended access list tcp 10.5.29.0 255.255.255.0 10.5.30.0 255.255.255.0 connect

<--- more="" ---="">

state_bypass allowed extended access list tcp 10.5.30.0 255.255.255.0 10.5.29.0 255.255.255.0 connect

outside_access_in list extended access permit icmp any one

access extensive list ip 10.5.16.0 outside_cryptomap_1 allow 255.255.240.0 10.5.16.0 255.255.255.192

access-list extended global_access permitted tcp object-group LDAP_source_networks host 10.5.21.1 eq ldap

access extensive list 10.5.0.0 ip outside_cryptomap_2 255.255.0.0 allow object DS365-Cloud

outside_cryptomap_3 list extended access allowed object-group ip DM_INLINE_NETWORK_4 10.5.25.0 255.255.255.0

pager lines 24

Enable logging

exploitation forest-size of the buffer of 100000

recording of debug console

debug logging in buffered memory

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

IP local pool clientvpn 10.5.30.1 - 10.5.30.100

mask 172.16.254.1 - 172.16.254.100 255.255.255.0 IP local pool VPN_IP_Pool

no failover

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow any inside

ICMP allow all outside

don't allow no asdm history

ARP timeout 14400

NAT (inside, outside) source static rfc1918 rfc1918 destination rfc1918 static rfc1918

NAT (inside, outside) static source NETWORK_OBJ_10.5.19.0_24 NETWORK_OBJ_10.5.19.0_24 NETWORK_OBJ_10.5.31.0_24 NETWORK_OBJ_10.5.31.0_24 non-proxy-arp-search of route static destination

<--- more="" ---="">

NAT (inside, outside) static source NETWORK_OBJ_10.5.19.0_24 NETWORK_OBJ_10.5.19.0_24 NETWORK_OBJ_10.5.19.0_24 NETWORK_OBJ_10.5.19.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source to the static inside-network-16 inside-network-16 destination DS365-DS365-cloud no-proxy-arp-route search

NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_172.16.254.0_25 NETWORK_OBJ_172.16.254.0_25 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_10.5.16.0_20 NETWORK_OBJ_10.5.16.0_20 NETWORK_OBJ_10.5.16.0_26 NETWORK_OBJ_10.5.16.0_26 non-proxy-arp-search of route static destination

NAT (inside, outside) source static c2si_Allow c2si_Allow NETWORK_OBJ_172.16.254.0_25 NETWORK_OBJ_172.16.254.0_25 non-proxy-arp-search of route static destination

NAT (inside, outside) source static atanta atanta static destination NETWORK_OBJ_10.5.25.0_24 NETWORK_OBJ_10.5.25.0_24 non-proxy-arp-search to itinerary

NAT (inside, outside) static source DS365-DS365-cloud static destination NETWORK_OBJ_10.5.25.0_24 NETWORK_OBJ_10.5.25.0_24 non-proxy-arp-search to itinerary

NAT (inside, outside) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_10.5.25.0_24 NETWORK_OBJ_10.5.25.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_10.5.25.0_24 NETWORK_OBJ_10.5.25.0_24 static destination DS365-DS365-cloud no-proxy-arp-route search

NAT (inside, outside) static source DM_INLINE_NETWORK_3 DM_INLINE_NETWORK_3 static destination DS365-DS365-cloud no-proxy-arp-route search

NAT (inside, outside) static source to the inside-network-16 inside-network-16 destination static NETWORK_OBJ_10.5.25.0_24 NETWORK_OBJ_10.5.25.0_24 non-proxy-arp-search to itinerary

NAT (inside, outside) static source DM_INLINE_NETWORK_4 DM_INLINE_NETWORK_4 NETWORK_OBJ_10.5.25.0_24 NETWORK_OBJ_10.5.25.0_24 non-proxy-arp-search of route static destination

network obj_any object

NAT dynamic interface (indoor, outdoor)

network of the LDAP_DC7 object

NAT 194.247.x.19 static (inside, outside) tcp ldap ldap service

inside_access_in access to the interface inside group

Access-group outside_access_in in interface outside

Access-Group global global_access

Router eigrp 143

No Auto-resume

Network 10.5.19.0 255.255.255.0

<--- more="" ---="">

Network 10.5.29.0 255.255.255.0

Network 10.5.30.0 255.255.255.0

redistribute static

Route outside 0.0.0.0 0.0.0.0 194.247.x.17 1 track 1

Route inside 10.5.16.0 255.255.255.0 10.5.19.252 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

RADIUS protocol for AAA-server group

AAA (inside) 10.5.21.1 host server group

key *.

AAA (inside) 10.5.16.1 host server group

key *.

identity of the user by default-domain LOCAL

the ssh LOCAL console AAA authentication

AAA authentication LOCAL telnet console

Enable http server

<--- more="" ---="">

http 192.168.1.0 255.255.255.0 inside

http 10.5.16.0 255.255.240.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

Sysopt connection tcpmss 1350

SLA 1 monitor

type echo protocol ipIcmpEcho 8.8.4.4 outside interface

SLA monitor Appendix 1 point of life to always start-time now

Crypto ipsec transform-set ikev1 strong-comp esp-aes-256 esp-sha-hmac

Crypto ipsec ikev1 transform-set strong aes-256-esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec ikev2 strong ipsec proposal

Protocol esp encryption aes-256

Esp integrity sha-1 protocol

<--- more="" ---="">

Crypto ipsec ikev2 AES256 ipsec-proposal

Protocol esp encryption aes-256

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 ipsec-proposal AES192

Protocol esp encryption aes-192

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 ipsec-proposal AES

Esp aes encryption protocol

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 proposal ipsec 3DES

Esp 3des encryption protocol

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 ipsec-proposal OF

encryption protocol esp

Esp integrity sha - 1, md5 Protocol

Crypto-map dynamic dyn1 1 set transform-set ikev1 strong

1 correspondence address outside_cryptomap_1 outside crypto map

crypto card outside pfs set 1

1 set 83.x.172.68 counterpart outside crypto map

Crypto card outside 1 set transform-set ESP-AES-256-SHA ikev1

1 set ikev2 AES256 ipsec-proposal outside crypto map

card crypto off game 2 address outside_cryptomap_3

map external crypto 2 peers set 23.100.x.177

card external crypto 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5

<--- more="" ---="">

map external crypto 2 set AES256 AES192 AES strong proposal ipsec ikev2

Crypto card outside 2 kilobytes of life of security association set 102400000

card crypto outside match 3 address outside_cryptomap_2

3 set pfs outside crypto map

map external crypto 3 peers set 91.x.3.39

crypto card outside ikev1 set 3 transform-set ESP-3DES-SHA

map external crypto 3 3DES ipsec-ikev2 set proposal

dynamic outdoor 100 dyn1 ipsec-isakmp crypto map

card crypto outside interface outside

Crypto ca trustpoint _SmartCallHome_ServerCA

Configure CRL

IKEv2 crypto policy 1

aes-256 encryption

integrity sha

Group 2

FRP sha

second life 86400

IKEv2 crypto policy 10

aes-192 encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 20

aes encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 30

3des encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 40

the Encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

Crypto ikev2 allow outside

Crypto ikev1 allow outside

IKEv1 crypto policy 1

preshared authentication

aes-256 encryption

sha hash

Group 2

lifetime 28800

IKEv1 crypto policy 2

preshared authentication

3des encryption

sha hash

Group 2

life 86400

track 1 rtr 1 accessibility

Telnet 10.5.16.0 255.255.240.0 inside

Telnet timeout 5

SSH 83.x.x.90 255.255.255.255 outside

SSH timeout 5

Console timeout 0

dhcpd outside auto_config

dhcprelay Server 10.5.21.1 on the inside

time-out of 60 dhcprelay

a basic threat threat detection

statistical threat detection port

<--- more="" ---="">

Statistical threat detection Protocol

Statistics-list of access threat detection

no statistical threat detection tcp-interception

NTP 10.5.19.253 Server prefer

WebVPN

allow outside

AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

AnyConnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 2

AnyConnect enable

tunnel-group-list activate

attributes of Group Policy DfltGrpPolicy

Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client

internal GroupPolicy_c2si group strategy

attributes of Group Policy GroupPolicy_c2si

WINS server no

value of 10.5.16.1 DNS server 10.5.21.1

client ssl-VPN-tunnel-Protocol

by default no

internal GroupPolicy_91.x.3.39 group strategy

attributes of Group Policy GroupPolicy_91.x.3.39

VPN-tunnel-Protocol ikev1, ikev2

internal GroupPolicy_83.x.172.68 group strategy

attributes of Group Policy GroupPolicy_83.x.172.68

VPN-tunnel-Protocol ikev1, ikev2

<--- more="" ---="">

internal GroupPolicy_23.100.x.177 group strategy

attributes of Group Policy GroupPolicy_23.100.x.177

VPN-tunnel-Protocol ikev1, ikev2

internal GroupPolicy_user group strategy

attributes of Group Policy GroupPolicy_user

WINS server no

value of 10.5.21.1 DNS server 10.5.16.1

client ssl-VPN-tunnel-Protocol

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value BerkeleyAdmin-clientvpn

myberkeley.local value by default-field

internal GroupPolicy_23.101.x.122 group strategy

attributes of Group Policy GroupPolicy_23.101.x.122

VPN-tunnel-Protocol ikev1, ikev2

internal GroupPolicy1 group strategy

attributes of Group Policy GroupPolicy1

VPN-tunnel-Protocol ikev1, ikev2

internal BerkeleyUser group strategy

attributes of Group Policy BerkeleyUser

value of 10.5.21.1 DNS server 10.5.16.1

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value BerkeleyUser-clientvpn

myberkeley.local value by default-field

internal DS365 group policy

<--- more="" ---="">

DS365 group policy attributes

VPN-idle-timeout no

VPN-filter no

IPv6-vpn-filter no

VPN-tunnel-Protocol ikev1, ikev2

internal BerkeleyAdmin group strategy

attributes of Group Policy BerkeleyAdmin

value of 10.5.21.1 DNS server 10.5.16.1

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value BerkeleyAdmin-clientvpn

myberkeley.local value by default-field

acsadmin encrypted V6hUzNl366K37eiV privilege 15 password username

atlanta uxelpvEvM3I7tw.Z encrypted privilege 15 password username

username of berkeley Kj.RBvUp5dtyLw5T encrypted password

type tunnel-group BerkeleyUser remote access

attributes global-tunnel-group BerkeleyUser

address clientvpn pool

authentication-server-group

Group Policy - by default-BerkeleyUser

IPSec-attributes tunnel-group BerkeleyUser

IKEv1 pre-shared-key *.

type tunnel-group BerkeleyAdmin remote access

attributes global-tunnel-group BerkeleyAdmin

address clientvpn pool

<--- more="" ---="">

authentication-server-group

Group Policy - by default-BerkeleyAdmin

IPSec-attributes tunnel-group BerkeleyAdmin

IKEv1 pre-shared-key *.

type tunnel-group user remote access

tunnel-group user General attributes

address pool VPN_IP_Pool

authentication-server-group

Group Policy - by default-GroupPolicy_user

tunnel-group user webvpn-attributes

enable-alias of user group

type tunnel-group c2si remote access

tunnel-group c2si-global attributes

address pool VPN_IP_Pool

authentication-server-group

Group Policy - by default-GroupPolicy_c2si

tunnel-group c2si webvpn-attributes

Group-alias c2si enable

tunnel-group 83.x.172.68 type ipsec-l2l

tunnel-group 83.x.172.68 General-attributes

Group - default policy - GroupPolicy_83.x.172.68

83.x.172.68 group of tunnel ipsec-attributes

IKEv1 pre-shared-key *.

remote control-IKEv2 pre-shared-key authentication *.

<--- more="" ---="">

pre-shared-key authentication local IKEv2 *.

tunnel-group 23.101.x.122 type ipsec-l2l

tunnel-group 23.101.x.122 General-attributes

Group - default policy - GroupPolicy_23.101.x.122

23.101.x.122 group of tunnel ipsec-attributes

IKEv1 pre-shared-key *.

remote control-IKEv2 pre-shared-key authentication *.

pre-shared-key authentication local IKEv2 *.

tunnel-group 91.x.3.39 type ipsec-l2l

tunnel-group 91.x.3.39 general-attributes

Group - default policy - GroupPolicy_91.x.3.39

91.x.3.39 group of tunnel ipsec-attributes

IKEv1 pre-shared-key *.

remote control-IKEv2 pre-shared-key authentication *.

pre-shared-key authentication local IKEv2 *.

tunnel-group 23.100.x.177 type ipsec-l2l

tunnel-group 23.100.x.177 General-attributes

Group - default policy - GroupPolicy_23.100.63.177

23.100.x.177 group of tunnel ipsec-attributes

IKEv1 pre-shared-key *.

remote control-IKEv2 pre-shared-key authentication *.

pre-shared-key authentication local IKEv2 *.

class-map state_bypass

corresponds to the state_bypass access list

Policy-map state_bypass_policy

class state_bypass

set the advanced options of the tcp-State-bypass connection

service-policy state_bypass_policy to the inside interface

context of prompt hostname

anonymous reporting remote call

Cryptochecksum:bbc6f2ec2db9b09a1b6eb90270ddfeea

: end

PTB-ch-asa5505 #.

Ah OK I see now.

Your cryptomap for the cloud of DS365 is:

access extensive list 10.5.0.0 ip outside_cryptomap_2 255.255.0.0 allow object DS365-Cloud

so, which covers interesting traffic.

However, your NAT statement is:

NAT (inside, outside) static source NETWORK_OBJ_10.5.25.0_24 NETWORK_OBJ_10.5.25.0_24 static destination DS365-DS365-cloud no-proxy-arp-route search

Network 10.5.25.0 is remote, then it will actually appear to be an "outside" network so I think you need this statement to begin "nat (outside, outside).

Save the configuration to plain text data

Hi all

I have a program with a lot of controls (aprox. 35) and their value, that I need to save.

I looked at the example of writing configuration file but it seems to be a lot of work to save 35 controls (more can be added later)...

Also, I watched the following page:

http://decibel.NI.com/content/message/4098#4098

The reason why I can't use this VI is that I would like to get the values of controls in plain text, so I can use the values in other programs or manually.

Tried to tinker a bit with an index of array and ungroup by name in order to get the names and the values separately and then convert

for a channel and record, but I can't get the value converted to a string Variant...

I know there are a lot of posts on the topic of the config, but I couldn't find one describing an easy way to save all the controls without doing it individually.

Hope you guys understand my problem and are able to help, just attach the VI of the link why my attempt to solve this problem...

Thank you

Concerning

Tommy

There is a vi OpenG , who can save and load all the values of F Ctrl in the Variant Config pallet.

Felix

Unable to save the configuration of PC5424 after power off the power

Hello

I am to set up the switch of PC5424, I set the admin/password and IP through the wizard of initiation. Access this switch using the IP through IE and I configured two VLANS in the pages web of DELL OpenManage Switch Administator and then I applied the changes.

I activated the switch and run it after several minutes. But I found that the VLANS configured dissappeared! How can I save my changes permanently?

Thank you

Problem with the VPN site to site for the two cisco asa 5505

Starting with cisco asa. I wanted to do a vpn site-to site of cisco. I need help. I can't ping from site A to site B and vice versa.

Cisco Config asa1

interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 172.xxx.xx.4 255.255.240.0
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.60.2 255.255.255.0
!
passive FTP mode
network of the Lan_Outside object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
Access extensive list ip 192.168.60.0 Outside_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_2 of object-group a
network of the Lan_Outside object
NAT (inside, outside) interface dynamic dns
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 172.110.xx.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.60.0 255.255.255.0 inside
http 96.xx.xx.222 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 96.88.75.222
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
inside access management

dhcpd address 192.168.60.50 - 192.168.60.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_96.xx.xx.222 group strategy
attributes of Group Policy GroupPolicy_96.xx.xx.222
VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 96.xx.xx.222 type ipsec-l2l
tunnel-group 96.xx.xx.222 General-attributes
Group - default policy - GroupPolicy_96.xx.xx.222
96.XX.XX.222 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Cisco ASA 2 config

interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 96.xx.xx.222 255.255.255.248
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.1.254 255.255.255.0
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the Lan_Outside object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_4
ip protocol object
icmp protocol object
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_2 of object-group 192.168.1.0 255.255.255.0 192.168.60.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_4 of object-group a
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.60.0_24 NETWORK_OBJ_192.168.60.0_24 non-proxy-arp-search of route static destination
!
network of the Lan_Outside object
dynamic NAT (all, outside) interface
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 96.xx.xx.217 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 172.xxx.xx.4 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 172.110.74.4
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0

dhcpd address 192.168.1.50 - 192.168.1.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_172.xxx.xx.4 group strategy
attributes of Group Policy GroupPolicy_172.xxx.xx.4
L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 172.xxx.xx.4 type ipsec-l2l
tunnel-group 172.xxx.xx.4 General-attributes
Group - default policy - GroupPolicy_172.xxx.xx.4
172.xxx.XX.4 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
inspect the http

For IKEv2 configuration: (example config, you can change to encryption, group,...)

-You must add the declaration of exemption nat (see previous answer).

-set your encryption domain ACLs:

access-list-TRAFFIC IPSEC allowed extended LOCAL REMOTE - LAN LAN ip

-Set the Phase 1:

Crypto ikev2 allow outside
IKEv2 crypto policy 10
3des encryption
the sha md5 integrity
Group 5
FRP sha
second life 86400

-Set the Phase 2:

Crypto ipsec ikev2 ipsec IKEV2-PROPOSAL
Esp aes encryption protocol
Esp integrity sha-1 protocol

-set the Group of tunnel

tunnel-group REMOTE-PUBLIC-IP type ipsec-l2l
REMOTE-PUBLIC-IP tunnel-group ipsec-attributes
IKEv2 authentication remote pre-shared-key cisco123

IKEv2 authentication local pre-shared-key cisco123

-Define the encryption card

address for correspondence CRYPTOMAP 10 - TRAFFIC IPSEC crypto map
card crypto CRYPTOMAP 10 peer set REMOTE-PUBLIC-IP
card crypto CRYPTOMAP 10 set ipsec ikev2-IKEV2-PROPOSAL
CRYPTOMAP interface card crypto outside
crypto isakmp identity address

On your config, you have all these commands but on your VPN config, you mix ikev1 and ikev2. You have also defined political different ikev2. Just do a bit of cleaning and reached agreement on a 1 strategy for the two site (encryption, hash,...)

Thank you

How to save the configuration of the printer
Hello

currently our QA EBS nearly 20 configured printers and it is due for refresh. My concern is how can I save this before making the cloning so that I don't have to add it again after cloning. What is the standard approach for this. Please let me know

Thank you
Kart
currently our QA EBS nearly 20 configured printers and it is due for refresh. My concern is how can I save this before making the cloning so that I don't have to add it again after cloning. What is the standard approach for this. Please let me know

Use FNDLOAD to download the definitions of these printers, then load them after the clone.

It is Possible to download the printer using Fndload [ID 432616.1] definitions
Advice on FNDLOAD [ID 735338.1]

https://forums.Oracle.com/forums/search.jspa?threadID=&q=FNDLOAD+and+printer&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

Thank you
Hussein

Cannot establish the Tunnel on ASA 5505 Vlan please help!

I can not get a tunnel to establish from (see config). I don't think I'm getting the phase 1. Am I missing something simple? Help, please

volatile xlate deny tcp any4 any4

volatile xlate deny tcp any4 any6

volatile xlate deny tcp any6 any4

volatile xlate deny tcp any6 any6

volatile xlate deny udp any4 any4 eq field

volatile xlate deny udp any4 any6 eq field

volatile xlate deny udp any6 any4 eq field

volatile xlate deny udp any6 any6 eq field

names of

!

interface Ethernet0/0

Inet description

!

interface Ethernet0/1

Shutdown

!

interface Ethernet0/2

Shutdown

!

interface Ethernet0/3

Shutdown

!

interface Ethernet0/4

Shutdown

!

interface Ethernet0/5

switchport access vlan 8

!

interface Ethernet0/6

Shutdown

!

interface Ethernet0/7

switchport access vlan 155

!

interface Vlan1

Inet description

nameif outside

security-level 0

IP address xxx

!

interface Vlan8

no interface before Vlan155

nameif [email protected]

security-level 100

IP 10.8.18.6 255.255.255.248

!

interface Vlan155

Private description

nameif inside

security-level 50

192.168.200.254 IP address 255.255.255.0

!

passive FTP mode

clock timezone IS - 5

clock to summer time EDT recurring

the object to the Interior-net network

192.168.200.0 subnet 255.255.255.0

network of the LocalLAN object

subnet 10.8.18.0 255.255.255.248

the RemoteVPNObjects object-group network

object-network 10.0.0.0 255.0.0.0

network-host xxxxxxxxx object

access extensive list ip 10.8.18.0 acl_iwdn allow 255.255.255.248 10.0.0.0 255.0.0.0

access extensive list ip 10.8.18.0 acl_iwdn allow 255.255.255.248 host xxxxxxxx

acl_outside list extended access permit icmp any any echo response

acl_outside list extended access permit icmp any one time exceed

access extensive list ip 10.8.18.0 acl_inside allow 255.255.255.248 10.0.0.0 255.0.0.0

access extensive list ip 10.8.18.0 acl_inside allow 255.255.255.248 host xxxxxxxx

pager lines 24

Enable logging

asdm of logging of information

Outside 1500 MTU

Within 1500 MTU

[email protected] MTU 1500

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT dynamic interface of Interior-net source (indoor, outdoor)

NAT ([email protected], any) static static source to destination LocalLAN LocalLAN RemoteVPNObjects RemoteVPNObjects

NAT ([email protected], outside) no matter what source dynamic interface

!
the object to the Interior-net network

NAT dynamic interface (indoor, outdoor)

Access-group acl_inside in the [email protected] interface

Route outside 0.0.0.0 0.0.0.0 public

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

the ssh LOCAL console AAA authentication

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

Crypto ipsec transform-set esp-3des esp-sha-hmac P2PVPNSet ikev1

Crypto ipsec pmtu aging infinite - the security association

card crypto DynamicMap 10 corresponds to the address acl_iwdn

DynamicMap 10 set crypto map peer xxxxxxxxxx

card crypto DynamicMap 10 set transform-set P2PVPNSet ikev1

DynamicMap interface card crypto outside

trustpool crypto ca policy

crypto isakmp identity address

Crypto ikev1 allow outside

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Console timeout 0

management-access inside

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

NTP server 132.163.4.103 prefer external source

NTP server 192.43.244.18 prefer external source

Tunnel-Group XXX type ipsec-l2l

tunnel-group ipsec-attributes xxxxxxxxx

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

Review the ip options

inspect the netbios

inspect the rsh

inspect the rtsp

inspect the skinny

inspect esmtp

inspect sqlnet

inspect sunrpc

inspect the tftp

inspect the sip

inspect xdmcp

inspect the icmp

!

Delete this;

no nat dynamic interface of Interior-net source (indoor, outdoor)

Add this;

network of the object OBJ-NAT-ALL
subnet 0.0.0.0 0.0.0.0
NAT dynamic interface (indoor, outdoor)

Try again, after the results of

Show cry isa

Pete

Configuration of Cisco ASA 5505

Hello

I have configured cisco ASA 5505, but I can't access the internet using my laptop connected to the ASA. I did not use the console, but the GUI for configuration. I changed inside of the ASA and he is 192.168.2.1. Inside, I cannot ping the outside material and outside I cannot ping the laptop connected to the ASA.

Here is my configuration:

Output from the command: 'show running-config '.

: Saved

:

ASA Version 8.2 (5)

!

hostname xxxxxxxxxxxxxxxxx

domain xxxxxxxxxxxxxxxxxxx

enable the encrypted password xxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxx encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.2.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP 192.168.1.48 255.255.255.0

!

passive FTP mode

DNS server-group DefaultDNS

domain processia.com

outside_access_in of access allowed any ip an extended list

icmp_out_in list extended access permit icmp any one

inside_access_in of access allowed any ip an extended list

pager lines 24

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

outside_access_ipv6_in IPv6 ip access list allow a whole

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 1 0.0.0.0 0.0.0.0

inside_access_in access to the interface inside group

Access-group icmp_out_in in interface outside

Access-group outside_access_ipv6_in in interface outside

Route outside 0.0.0.0 0.0.0.0 192.168.1.48 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

Enable http server

http 192.168.1.0 255.255.255.0 inside

http 192.168.2.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd outside auto_config

!

dhcpd address 192.168.2.2 - 192.168.2.129 inside

dhcpd dns 80.10.246.2 80.10.246.129 interface inside

interface ping_timeout 5000 dhcpd inside

dhcpd xxxxxxxxxxxxxxxxx area inside interface

dhcpd allow inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

!

!

!

Policy-map global_policy

!

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:7e6f35db321b722ca60009b0c0dc706e

: end

Thank you for your help

Hi Sylla,

The static route that you configured for Internet access needs to be corrected:
```
route outside 0.0.0.0 0.0.0.0 192.168.1.48 1
```
The next hop address must be the IP address of your ISP gateway and not the ASA outside IP of the interface. Currently, both are set to 192.168.1.48.

-Mike

Cannot save the Management Pack Configuration in VROPS

Hello
We started to experience a strange problem with our new VROPS 6.1 deployment when you try to configure certain management packs.
We have 3 VrOPs devices deployed, Master, Master Replica and collector remote monitoring 3 standard vSphere (2 vRealize and a NSX) deployed using VMware cluster more practices and are working well. We had some problems with our vSAN where we lost a large amount of data because of a corrupted data store which meant losing our vCenter cluster Resource and Management 2 devices. Our vROPS / /vRA of the PSC devices / instances were fine as they were running on other storage. We had to re-bulid our vCenter but now have everything back running as expected.
However... We started to add the vRA and SCOM management packs in vROPS which works well and sets up very well... but then something strange happening after about 5 minutes of data collection... the Configuration of each of the vRA and adapters SCOM disappears... And data collection stops. For more visit, it seems that someone has gone and remove the configuration of the adapter, but this isn't the case, because no one else has access to this environment.
In any case, now when we try to re - configure an instance / configuration of an adapter we can not save the configuration of the card after we successfully test the connection we get this strange message that I have attached a screenshot in this post.
The message reads the following:
1. Unable to create the resource to HAVE it. Resource with the same key already exists.
We have tried to remove the packs management, PAK re - install and replace the existing, but it does not work we always get the same error when trying to save.
We are not now able to save the configuration of the vRA or SCOM adapters... and I'm a bit puzzled. Any help would be greatly appreciated.

Hello

I had similar problem. Which user are you logged as? There is a problem with the user rights and management packs. Only the local administrator users must be used, try to connect to this account and see if your configuration is not there already (such as msg of error States).

Save the configuration to ASA 5505

Similar Questions

Maybe you are looking for