On the screen blurry

Similar Questions

• How to make part of the screen blurry

  Hi all

  I'm fairly new to prem pro cs5/after effects cs5

  I want to apply Blur to the background of shooting s. For example a person I am interview is in discussions with the rest of the fuzzy on shooting. Ive been looking blur

  tools that is the effect I want. How to only a part of the blurry shot. (or any other effect besides)

  Thank you

  Chris Anderson

  Chris,

  I agree with prejudice. AE CS5 added the RotoBrush, and it should do what you want much easier. Here's some BACKGROUND.

  There are several ways to manage the final, for example using ADL (Adobe Dynamic Link) to get the 'knockout' in PrPro image and place it on the original film. Then just add a blur to the original, with no fuzzy AE version on top. A couuld also blur of the conclusive video background that the effect of the detachable part of the person.

  Good luck

  Hunt

• Re: Satellite A500 - screen blurry / distorted by tilting the lid towards the front

  G ' Day

  * A500 ~ 17' PSAR3A - 01 K 002 *.

  I bought this machine 6 back butterflies and just recently, I found that my screen blurry colors if I'm tilting/folding/closing my screen to the front (less than 80 degrees). The screen turns into film grain deformed pink with vertical lines on the right 1/3 of the screen. Please help me understand what the problem with my new machine or is this normal.
  Interestingly, I tried to capture this defect with the capture tool that recorded images are like normal display.

  I'll try to capture this default display with my cam, but I was wondering if any help is there for the same thing at the moment.
  concerning

  After 10 years of intensive use for laptop, I can say that this behavior is definitely not normal.
  Point does not understand why this happen, but how to solve this problem.
  Laptop warranty valid so don't waste your time and contact the nearest Toshiba authorized maintainer as soon as possible.

  They should check your laptop and remedy. I assume that the cable that connects the screen with the motherboard may be responsible for this.

• Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Is your very large monitor, like an old TV or flat, as perhaps a few inches thick?  If it is very deep (front to back), you have an old style monitor, and they need to be demagnetised every now and then. Look on the monitor for the menu button and navigate until you find an icon like a horseshoe with a bar slash through it (or like a magnet) and select it.  All wavy and colorful display for one minute and then went back to normal. Also, make sure that all the cables between the monitor and your computer are firmly connected at both ends, even if you have a thin screen.

  If you have a laptop, try to turn the screen and see if the blur changes.  If so, you might have a connector loose inside and may need to be considered at a repair shop. =(

  Best luck!

  (There is a small chance it is a result of burn; made me know if any of them help you, or that they do not apply.)

• Monitor is blurry, can not read the words on the screen.

  Original title: screen blurry.

  I am running windows xp, my screen is all fuzzy, canoe read words and I have a black fuzzines on the right side. Please can someone help

  Thanks for the reply, I tried the above tips, but my monitor is not if badly I can't read the words/letters on the screen. I borrowed a monitor for now. Thank you very much

• across from the bottem of my screen and about a quarter way to the top of my screen has a line appear and below this line, everything is blurry. It seems to have something to with the reality of the screen itself, what can I do about it?

  I already tried the restore but it is still there, what can I do?

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If it persists, it may be a hardware problem.

  Contact the manufacturer of the computer/monitor.

  See you soon.

  Mick Murphy - Microsoft partner

• When I go from one webpagr to another resolution of the screen going from 32 bit to 8-bit.

  Im running windows xp and firefox 32.0 is my browser.my default home page opens and looks very good. then when I go to another Web site, that page going from 32 bits to 8 bits. I opened Control Panel, clicked on display, click settings, click on the area of resolution to set it to 32 bit and then clicked ok, the screen changes to 32 bits, I close the tab setting, close the tab of display properties and close the control panel. then, when I go to another Web page it goes back to 8-bit and looks blurry, and the colors are not good. How can I fix it?

  The colors are color change from 32-bit to 8-bit color?

  Sometimes, the Windows display is affected by compatibility in your Firefox shortcut settings, the icon you use to start Firefox. If that right click and choose Properties, then click the Compatibility tab, here's where you indicate you want Windows look more primitive when you use Firefox. For best results, uncheck all OPTIONS on this tab (in other words, use all the features of Windows XP).

  Was she?

• Satellite M100 - screen turns white when you press the bottom of the frame of the screen

  Hello

  I have a strange problem with my Satellite M100.

  When to start the laptop, the screen is totally blank.
  When hand press to the middle part of the bottom of the frame of the screen (black plastic frame) the display looks fine, as long as I am pressing on it.
  When let pressing, the screen becomes funny,

  Also noticed, when top screen downstairs, appears blurry white screen.
  But the screen is OK as long as I pressed the plastic at the bottom of the screen frame.

  Any idea would be greatly appreciated, want to confirm which part is faulty, so I can avoid replacing the whole LCD.

  Thanks in advance.

  Hello

  For as far as I know the small part called FL inverter is hidden behind the frame s screen.
  Maybe it s something with this part. Who knows it would be necessary to test this
  On the other hand, one cannot rule out a display problem

  You see, it's hard to say, really a malfunction which part
  Therefore, it would be advisable to contact a technician for laptop

  See you soon

• Need advice replaces the screen HP Mini 2102

  Hey all,.

  I'm fixing a netbook HP Mini 2102 which was abandoned on the ground. The netbook works fine, except that now the screen is a little blurry and washed on the right side. Generally, when a computer screen is upward, trying to replace the converter display card, as was the case with a machine to HP Pavilion dv9000 I fixed recently.

  However, after dismatling the computer, I found no such ups on the screen, and after consultation with an HP support assistant very useful during a session of live chat who informed me that it is not a separate inverter Board available for purchase, I have come to believe that I need to replace the entire screen.

  If I'm not mistaken, the LCD part number is 589649-001 for this particular model that I am repairing. I created this post to confirm that the ups on this Mini Board can be replaced, and I need to replace the entire LCD screen - less camera, bezel and hinge, which all work fine - in order to solve the display problem.

  If you have any other suggestions as to what part I need, or if I have to take a completely different approach to the repair, please let me know before ordering the part of LCD screen.

  "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

  Hello

  You are right, you can save money simply select the good parts. I think not much.

  Good luck.

• How to change the display of the screen being stretched, blurred and the police is too big

  my screen went all tense and blurry, and the police is greater. I had connected it to a TV. I experminted with the resolution settings, but they have not made a difference, what do I do now?

  Hello

  2 things you can try:

  1.

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  2.

  try to get your site in manufacturere graphics or computer cards and find the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  THEN try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have.

• grey horizontal stripes on the screen

  All of a sudden, there is gray horizontal stripes on the monitor everywhere where there is text. It goes away, then comes back. The screen looks blurry when it really hurts.

  I know this isn't the screen because I already tried to use another monitor.
  Any ideas?

  Hello

  I suggest you follow the below methods that can help you solve

  Method 1: Try to update the display drivers. Do follow link below:

  Update display drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: I also suggest you to try to connect different monitor and check for the issue.

  Hope the helps of information. Answer please come back and let us know.

  Kind regards

  Ramata Thakur.

• S2409W image is not complete from the edges of the screen - black

  I just bought a dell s2409w and connected via an HDMI cable to the border leaves image has black ~ 1 "on all edges.  The default values of resolution 1920 x 1080 (native resolution for this monitor).  I can reduce the resolution and the image fills the screen, but there is a loss of clarity - fonts and blurry images "."  Some resolutions adversely affect the aspect ratio more, leaving the image stretched the research.

  If I connect via the VGA port, the maximum resolution is 1280 X 800, and the image fills the screen, but also the 'blur' that occurs when I reduce the resolution when on the HDMI.

  After spending about an hour on the phone with technical support, the suggestion was to get an HDMI to DVI converter dongle.  I did and the maximum resolution available when I connect this way is 1280 x 800, the same as when you use the VGA port.

  The image on the lower resolutions is not what I consider "HD".  It is so bad that the quotes I used look almost like a single block instead of two separate entities. The image seems clear on the 1920 x 1080 resolution, but, even once, it leaves a border around the edge.

  It's on a portable with a videocard ATI Mobility Radeon HD3410 three week old.  I run Windows Vista.  Any ideas?

  Neil

  I know it's late but I had this difficulty in the sticky "FAQS Monitor', 'Black Border on Display.

• The sides of the screen are cut

  * Sorry if I have errors of language *.

  I bought a new PC with Windows 7 64 BIT (video card - AMD Radeon HD 7800)
  If I put the 1920 X 1080 resolution, the screen looks blurry and the quality is very poor and there are black lines on the edges.
  If I put in 1680 X 1050 resolution, which he's resolution I need, the quality is good, but I do not see the sides because they are cut.
  I can't see the icons on the sides and the taskbar.
  I'm tired of installation and update drivers, and also the scale of change in CCC option is disabled and greyes in this resolution.
  I have a TV screen, so I have no hace the option of automatic adjustment.
  Please help me!

  It seems that the aspect ratio is off,

  Right-click on your desktop and go to the graphics options,

  

• Flattening, save money, levels: a very different output than what I see on the screen

  Photoshop wizards! I'm stumped on this problem and it's driving me bananas! It's a simple photoshop file, thus creating a background star field using noise and great basic tools. However, when I try somehow to save or flatten the image, the results look different way from what I see on the screen! This problem just started today and I don't know why, and nothing I've tried has fixed it. I am literally unable to create anything because whenever I try to save, I get a very different picture.

  
  In this screenshot, I use the save for web window to show what is happening, but it's the same, if I Flatten all layers, merged copy or try to save it as that - of course the results are not what my original document shows. It's like levels and layers are completely ignored. The same thing also happens when I try to apply levels to any similar image, it seems to go in the preview, and then totally different after the application.
  

  There is no transparency, layer styles or something tricky going. The document has the color management and RGB 8-bit/channel, test colors is disabled. I restarted my computer restarted the document from scratch twice, reset my preferences, off hardware acceleration, updated for the last CC 2015.5 and have been Googling for the last hour... no luck.
  I forget something really stupid, or I don't know what. I remember running on this problem before with my old laptop, but I do not remember what was the solution if I ever found a. If anyone wants to check out the document, it will be temporarily here:

  https://DL.dropboxusercontent.com/u/9988355/StarField2.PSD.zip
  Stats: Mac OS X MacBook Pro 10.11.4, (2015)
  Appreciate any help!

  Glimpses of adjustment are calculated on the basis of the ratio of the screen zoom. This is done for performance reasons.

  In other words: If you view at 50%, the preview adjustment is calculated from this version sous-échantillonnées. Now look at this reduction of scale means causing the pixel details - it becomes blurry and fuzzy. So now you get a series of intermediate values that do not exist in the original, and you see adjusted values that do not exist. I can give you a false idea. But when you post adjustment (Flattening), the complete original data are used.

  Always keep in mind that the beach tonal adjustments have no effect on each of the pixels that are pure black or pure white. They only work on the medium gray.

  This consideration applies to all images with high acutance (sharp pixel-level transitions). It is not normally a problem for a normal picture with smooth transitions.

• Where can I find the tutorials without the bottom of the screen cut off?

  One of the first tutorials shows the guy take a giraffe from a photo and put it on the beach. (He moves too fast) It clicked once and moves by... I can't tell what the bottom of the screen is cut off! and it's slightly blurry, not very good tutorials. (Lightroom tutorials were great, day and night)... I tried this same thing, first it resized my picture for a little thing and when I clicked with the Quick Selection tool it erratic chose only the parts of the person I'm moving. What I am doing wrong? Three hours and I am so frustrated that I forgot most of what I have learned. I had a little things in two on the same window by moving a single photo at a time and the second was my second layer but could not get to see the two on the list that I can use a layer. So basically, it was a disaster. I'm giving today.

  Trainsimple.com and Lynda.com online video tutorials are worth looking at.