S2409W image is not complete from the edges of the screen - black

Similar Questions

• How can I force an image to open completely on the screen in action?

  In PS CS5 when I open an image with height in the range of 1405-1411 or 1873-1882, the image opens half of the bottom of the screen.  Width opts seem to matter.

  I guess it's a bug, but until it is fixed, I'm trying to work around.

  For manual fitting the vertical adjustment button or zoom out screen causes the image to the screen lights up but neither of these options will save in an action to display.

  When an image is opened halfway off the screen, Place a command place precisely for these images.  So an action that includes a place does not work for these images.

  So either I want to find an arrangement (Nothing in preferences that I can find) to force the image open to the screen, or find a command that runs in an action that activates the picture to come on the screen, while not interefering with images that open normally.

  You can use Insert a Menu item (the Launcher to the Panel menu actions) to record something like view > fit to the screen, but what you describe should not be the case.

  You are using tabs or floating documents?

  Have you tried resetting preferences cs5?

  http://forums.Adobe.com/thread/375776?TSTART=0

  Maybe you could post a screenshot showing how the image opens.

• Windows 8 on AMD Radeon graphics card is not completely fill the screen

  Just installed Windows 8 Pro on a Dell Inspiron Zino HD with an AMD Radeon HD 4300 Series.

  Display is a LG on HDMI monitor.

  Installation went well apart from my screen Windows does not fill my entire screen.  I don't think it's something to do with the resolution of the screen, it's just the way that 'image' does not fill the screen correctly.

  Hello

  Did you install these legacy AMD official drivers?
  http://support.AMD.com/us/KbArticles/pages/catalystlegacywin8.aspx
  There is also a setting in the Catalyst Control Center associated with overscan (he has a slider).
  This one should expand your image to fill the edges of the screen.
  Carlos

• Windows is not completely fits the screen.

  I installed windows 7 64-bit. I can see that there is little space on the right side of my screen (about a finger). It is an empty space and windows desktop screen does not adjust the screen completely. Is it a default of windows or my machine is missing some time?

  Please help me understand the issue.

  See:

  Change your screen resolution - Microsoft Home Page | Devices and...

• What to do if symantec antivirus is not removed completely from the pc

  I have a symantec antivirus. what I try my best to remove pc., with all the usual ways. but I can't seem to do. what I do more than symantec antivirus remove it completely from the system.

  Hello

  Download and run the Norton removal tool.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=en&CT=us

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=kb20080710133834EN_EndUserProfile_en_us&product=home&PVID=f-home&version=1&LG=en&CT=us

  See you soon.

• My "restore from backup" does not end as the screen lock appears

  I got a new iphone with 64Meg and OIS 9.3.3 6 operating system. Before putting in my business phone; I backed up my data on itunes using my PC with Windows 10. As I'm trying to "restore backup" on an iphone same 6, I was unable to do, when to halfway through the download process, the screen lock appears and disconnect the iphone from itunes and the download stops. It seems to be appx 29 minutes for download; but I never got rained only 7 minutes to download completion before the screen is locked or the battery at 100% load indicator disconnect the iphone.

  I have disabled all notifications, deleted my AOL Mail, set the screen saver to "never", off of password, all without success. Help!

  Hello, Franklytex!

  Welcome to the communities of Apple Support and post your first message! Looks like you have a problem to restore your backup from iTunes. I know how important it is that your iPhone can be restored properly! Read this article which has steps for you If your iTunes backup could not be completed or you can not restore from a backup. More precisely:

  Try again after each step

  1. Make sure you have the latest version of iTunes.
  2. Connect your device to your computer with a cable USB, then Select your device in iTunes. If your device does not appear in iTunes, you must correct this problem until you can continue. Or, if you have forgotten your password or your device is off, know what to do.
  3. Turn off your computer and your iPhone, iPad or iPod touch. Then turn on again them.
  4. If you use a Mac, skip this step. If you use a Windows PC and iTunes will not respond or never ends your backup, you may need to to update, edit, disable or uninstall your security software.
  5. If you have multiple computers, try to make a backup on your other Mac or PC. Otherwise, use iCloud for save your device and restore it from your backup to iCloud.
  6. If you see an alert indicating an error has occurred, your backup is corrupt or incompatibleor there is not enough disk space, find your error message below to learn what to do next.
  7. Contact Apple technical support.

  See you soon!

• The windows of the bar of Windows are already a form of tabs, so I need them in Firefox. How can I turn off completely from the 23 of Firefox?

  RE: TABS ARE WINDOWS!
  The windows bar already functions as a tab bar. These tabs are called "windows". So, I find windows superfluous Firefox tab. How can I turn off completely from the 23 of Firefox? I don't need to what are essentially the bars of TWO Windows covering the entire width of the image of my screen! I already have a Windows bar at the bottom of my screen, and if I really wanted to, I could change ITS position towards the top of the screen, so that it would LOOK at the windows of Firefox tabs bar. Firefox TABS are, essentially, a SECOND bar Windows superfluous.

  Here are my reasons why I prefer to use Mozilla's Firefox, Microsoft Internet Explorer or Google Chrome. I love and admire Firefox intended to Mozilla on good security for Personas Firefox Add-on and for free use of Firefox in the Add on Ad-Block, which, as you know, has the merit of separate to reduce the size of the screen - the last is my reason for wanting to get rid of "windows" Firefox SUPERFLUOUS tabs bar. I'm terribly sick companies forcing bars (most representative of marketing campaigns, trying to sell me something) in my browser (and in my throat) whenever I download something. (In case you haven't guessed, I have deliberately talking about your bar of Firefox tabs as a '' windows' tabs Firefox bar', because the TABS are WINDOWS!)

  You can also have an addon to open new tabs in a new window.

  • https://addons.Mozilla.org/en-us/Firefox/addon/tab-to-window/?src=search

• Error - the specified i/o operation on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period.

  Original title: XP USB device timeout - is there a solution?

  Under all the circumstces I get: "Windows - Device Timeout" The specified IO on Device\Harddisk2\DR4 did not complete before the time-out expired period.  The drive is a Sony external 150 GB USB2.  The only way to remedy this is turned off and let windows re - recognize.  It stops usually after 18minutes regardless of activity. I did all the USB install no etc no difference.  Please advise as soon as POSSIBLE!  Please not flaky ideas or suggestions.  P.S > I looked the FIX for USB, but it is not specific to my question - if I ask this question instead.

  Hello

  ·        What is the brand and the model of your machine?

  ·        What steps you have tried to solve the problem other that Reinstall USB?

  ·        You did it all change hardware or software on your machine before this problem?

  You can contact the manufacturer of your computer to update the chipset drivers and check if the problem persists.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When runing the system restore, I get a message says, "System Restore did not complete Sudessfully" the reason why it gives States "an unspecified error occurred during system restore.

  When I was runing the Sytem Restore I get a message that says "System restore was not completed successfully" the reason he give said "an unknown error occurred during system restore.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Error during the download of Windows 8 on Windows 7: "download failed. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  Currently, I have Windows 7 and had to buy Windows 8 for the school. I tried downloading it several times, but when she writes the check, it is said, "Download unsuccessful. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  I don't know what to do.

  Original title: download Windows 8 Windows 7

  Hello Travis,

  Thanks for posting your question on the Forums of community of Microsoft.

  To better understand the issue please help us with these questions.

  from which site you try to download Windows 8?

  b. what browser do you use to download?

  c. you try to download a full version or update?

  d. you run the upgrade wizard before trying to download the Windows 8?

  This problem usually occurs due to the installation of Web the contents of the folder in the system. So, now, I you suggest to rename or delete the installation folder to the following location and then try to download Windows 8:

  C:\Users\\AppData\Local\Microsoft\Web install

  See also the link mentioned to follow the correct steps before and during the installation of Windows 8 below:
  How to upgrade to Windows 8

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of upgrade of the OS.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Image load not completely to develop

  Implement image does not completely load. He is back and the contours of the image in bright Neon colors. Does anyone have a solution?

  It looks like a hardware problem of GPU or RAM.

  What is your version of Lightroom and the OS?

  If your have Lightroom CC or Lr6 try to uncheck the graphics in preferences > performance

  

  Please provide a screenshot of what it looks like if the above does not work...

• I am under 12 items on a new iMAC El Capitan V.10.11. Problem is that the application completely fills the screen, so no desk top to drag to or from. It can be resized?

  I am under 12 items on a new iMac El Capitan v 10.11.

  Problem, it's the Application completely fills the screen so there is no desk top to drag to or from. The elements can be resized? I see nothing in preferences or installation instructions.

  Can not drag you upward from the lower right? Or click on the green button first, and then drag it.

• Images JPG, stored in DB, are not displayed on the screen/image.

  Hi friends,
  
  I have a form to save and retrieve images (JPG, GIF, TIF) to and from the DB, using WEBUTIL_FILE_TRANSFER. CLIENT_TO_DB and CLIENT_IMAGE. WRITE_IMAGE_FILE respectively.
  It works fine, but with few JPG images, it stores in DB, but not displayed on the screen/image.
  Second, if I try to retrieve and write the JPG to the operating system (using CLIENT_IMAGE. "" WRITE_IMAGE_FILE), he invited error "FRM-47101: cannot write the file image.
  
  Environment:
  Forms [32 bit] Version 10.1.2.0.2
  Operating system XP Pro 2002 SP3
  Oracle DB 11 g Enterprise Edition rel. 11.1.0.7.0 - 64 bit
  
  Any help will be much appreciated.

  Hello

  Some recent JPEG formats are not supported by the forms. I can't tell you exactly what, but I have already noticed that some images could be made only by the forms. The only solution is to save the images with another program to transform the internal format to a recognize an or use a Java Bean able to read all of these formats.

  François

• I get emails with pictures and when I send them to others. they open them but the images are not displayed. The photos are there when I send them. Thank you

  I get emails with pictures and when I send them to others. they open
  their place but the images are not displayed. The photos are there when I send a
  them. Thank you

  Make sure that your security software (antivirus) is not blocking attachments.

• MY iphone6 will not return from the icloud, HELP?

  I had to replace my phone.  The new phone will not render from the icloud.  I tried several times and I even took it in the Apple store without success.

  Weezy616 wrote:

  I had to replace my phone.  The new phone will not render from the icloud.  I tried several times and I even took it in the Apple store without success.

  Thanks a lot for sharing that you cannot restore icloud.

  Maybe include some details as to what happens when your restore IE. error message?

  Or that said Apple store has been without success...