On the validation server fly side

Similar Questions

• How keep radiogroup verified to the tabular report after the validation error?

  Hello!

  I have a tabular report with radiogroup fields, and when I try to send the page, if the validation does not pass by, my radiogroup fields unchecked.

  Does anyone know how to prevent this?

  If I can't fix this evil must pass the JavaScript validation.

  I use the version 4.2.1 of the apex

  EgaSega wrote:

  If I can't fix this evil must pass the JavaScript validation.

  ZAPEX wrote:

  There is no harm in using JavaScript validation to proceed with it.

  You can not 'show' validation JavaScript, and there is a lot of prejudice based on this alone.

  JavaScript validation can be used in addition to the validation server-side such that it can easily be turned off or bypassed in the browser. Any JavaScript validation in the browser in order to improve the user experience needs to be duplicated on the server to ensure that the controls provided have been performed.

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• When itunes download get the error, does not have a valid digital signature that verifies the publication server

  I can not download itunes. I have windows vista.  I get the error message: does not have a valid digital signature that verifies the publication server

  Hi klofcc,

  1. are you able to download and install other applications without any problem?

  2. What is the full error message?

  I suggest that you try the steps from the following links to the article and check if it helps:

  Problem installing iTunes or QuickTime for Windows

  I hope this helps.

• CFFORM - form validation does not AT ALL during the test on the production server

  So I did all my tests on my local test of Coldfusion server. All form input boxes are validated correctly, with a dialog box popping up when it has not been completed

  When I upload it on the production server, also running ColdFusion 8, it not there no event at all - no dialog boxes, cfform validation etc...

  I use the same client computer to test locally as I test it on the web, and yet I get two different results! Any ideas?

  THE FIRST THING to check in this case, it is that you can connect properly to the/cfide/scripts/folder via the web site on the production server.  This scripts folder is where ColdFusion retains all its javascript, CSS and other client files used in computing, the and other client UI features.  If your browser cannot access these files, these features will not work.

  Rapid tests is just to put the /cfide/scripts/wddx.js in your browser on the production server and see if you get the right javascript file.  If this isn't the case, you must make sure that there is a CFIDE virtual directory configured in your web site and that this directory is readable by users.

• Why is a user with the DBA privilege necessary side SQL Server to migrate?

  Greetings
  
  Project to migrate a SQL database to Oracle using SQL Developer.
  
  The docs say that a user with DBA privileges is required in the SQL Server database when you run the migration of the side Oracle.
  
  Why?
  
  Why a user with only READ access to SQL Server data would be necessary?
  
  Thank you very much!!
  
  -gary

  The DBA privilege at the source database is required because SQL Dev Migration is also collect information from SQL Server system tables, which a normal user is not always possible to query. It is mandatory that the migration is trying to build an Oracle schema which corresponds as much as possible the source database.
  But this requires having become DBA in the foreign database to avoid permission problems. If you SQL Server admin does not want the DBA privilege, you can also do a Migration offline - here the ADMINISTRATOR must run the generated scripts offline in-> Migration-> 3rd capture in the database offline party

• Database test on a different server with the same name of SID as database production - thoughts?

  Hello

  We use oracle 11.2.0.3 and have 2 environments a production environment and test each on different servers.

  Currently, our test database has database different SID to the production one.

  DBA is eager to have the database of test with the same name of SID.

  Thoughts/concerns in this area - will be on different servers.

  Thank you

  We also had a similar situation, it allows to save a few hours when cloning (we do not use RMAN), but a lot of damage, it can create.

  So much better with different names on different servers.

  concerning

  Pravin

• How to restrict Internet access by using the RADIUS server via switch Catalyst 3560

  Dear all,

  I need a configuration using any. I have a small network of 15 users a 3560, which is in turn connected to a router ISR 2811. Interface fastethernet 0/24 switch 3560 I intend to connect to a unix based server RADIUS. ISP is connected on the opposite side of the 2811 to the fa0/0 interface.

  I want to make is that if someone among the 15 users tries to access the internet, they must be validated in the RADIUS server by their pre-configured user credentials. (I'm going to store 15 user credentials here). If someone else tries to connect (except those 15) he or she should be denied internet access.

  The RADIUS server will be having a login page to type the name of user and password.

  Please guide based on what commands I should inject into the 3560 or what specifically, I need to have to run this task.

  Thanks in advance!

  Samrat.

  I only did this in a very long time, but you probably want to do is activate the web authentication.

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3560/software/release/12-2_52_se/configuration/guide/3560scg/swwebauth.html

• Question about the listener and the process server in dedicated server mode

  Hello
  
  The Oracle documentation says that, when a client connection request is received on the server, the receiver creates a process server who will work with the database instance to perform the tasks requested by the user/client process. So far, everything was good.
  
  Now, when the user is on the Oracle himself server, the listener didn't need to run to establish a connection to the database. Therefore, it is possible to stop the Listener and not always connect using sqlplus and a valid username and password.
  
  In the case above, the question is: if the listener does not work, what/who created the process server that communicates with the instance of the database on behalf of the user? In other words, in the normal case, the listener could get the request and create the server process. When the listener does not work what part of the Oracle Gets the requests and creates the server process?
  
  Clarification on how this case is handled are very much appreciated, thank you,
  
  John.

  440BX - 11 GR 2 wrote:
  Hello

  The Oracle documentation says that, when a client connection request is received on the server, the receiver creates a process server who will work with the database instance to perform the tasks requested by the user/client process. So far, everything was good.

  Now, when the user is on the Oracle himself server, the listener didn't need to run to establish a connection to the database. Therefore, it is possible to stop the Listener and not always connect using sqlplus and a valid username and password.

  In the case above, the question is: if the listener does not work, what/who created the process server that communicates with the instance of the database on behalf of the user? In other words, in the normal case, the listener could get the request and create the server process. When the listener does not work what part of the Oracle Gets the requests and creates the server process?

  John,

  I guess that you have asked the same thing in a different form in another thread. In the case, when the process of the user and the server is to be on the same side, the communication done by using the Protocol bequeth and the user, since it is not not going to use a (@) sign, he would use a default service for connected sys$ users .

  HTH
  Aman...

• Install second connection to the web server at DB 10R2 running Apex 3.0.1.00.08

  All,
  
  I'm trying to add a second web server to move a part of the web traffic to another resource. I have a 3.0.1.00.08 instance that runs on the database connected to the web server and I just wanted to add a second connection to the front-end web server.
  
  The second is web server currently running SOA suite so it was logical financial to simply add another call on this web server.
  
  ServerA (existing web server) to connect successfully to the server b (existing database server).
  ServerC (new web server) to be connected on server b.
  
  Directory copied apex and images ServerC ServerA
  
  TNSNAMES. ORA on ServerC located under ORACLE_HOME\NETWORK\ADMIN
  ORCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ServerB.Address)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORCL)
  (SERVER = DEDICATED)
  )
  )
  
  Server c, I use SQLPLUS to connect to server b using APEX_PUBLIC_USER, correct password, ORCL
  
  Change ORACLE_HOME/Apache/modplsql/conf/dads.conf on ServerC
  
  Alias is ' ORACLE_HTTPSERVER_HOME\Apache\images / '.
  AddType text/xml xbl
  AddType text/x-component htc
  < /plex location >
  Order deny, allow
  Docs PlsqlDocumentPath
  AllowOverride None
  PlsqlErrorStyle DebugStyle
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  PlsqlDatabaseConnectString cn = orcl, cn = oraclecontext NetServiceNameFormat
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  PlsqlAuthenticationMode Basic
  SetHandler pls_handler
  PlsqlDocumentTablename wwv_flow_file_objects$
  PlsqlDatabaseUsername APEX_PUBLIC_USER
  Apex PlsqlDefaultPage
  PlsqlDatabasePassword correct_password
  Allow all the
  < / location >
  
  Restart HTTP_SERVER on ServerC.
  
  I get the error:
  Journal of the database failed
  
  TNS is unable to connect to the destination. Address provided is not a valid TNS or destination is not listening. This error can also occur due to underlying network transport problems.
  
  Ensure that the TNS name in the entry of the DAD for this URL connection string is valid and the listener of the database is running.
  
  ORA-12170: TNS: Connect timeout occurred error-Code: 12170 error TimeStamp: kills, 16 December 2008 20:35:58 GMT
  
  I thought it was weird since it's what worked on the other server and using sqlplus.
  
  I also tried to change the dads.conf file to use the following connection string:
  PlsqlDatabaseConnectString SERVERB:PORT:ORCL ServiceNameFormat
  
  No luck. Why the connection work with SQLPlus and not modplsql? What I am doing wrong? If not, how can I solve this?
  
  Any ideas?
  
  Thank you
  Keith

  Keith:

  Try to use the "SIDFormat" in dads parameter 'PlsqlDatabaseConnectString' instead of 'ServiceNameFormat '.

  CITY

• How can I change the SMTP server to any server I want to?

  This is a common situation, and I have seen many others ask a similar question. It is a simple question, but Thunderbird does not seem to allow it. In my case, I have a choice of two mail server outgoing. I can use my hosting company Godaddy or my Internet provider, the local cable operator Charter Web. By default, Tbird uses the same mailserver incoming and outgoing, if possible, so my e-mail account has been configured to use the outgoing Godaddy server.

  I would prefer, however, to use the local server SMTP of Charter. But I can't find any way to change to that of Tbird. I could do it in Outlook Express, because both servers are listed for each e-mail account and can be changed.

  In Tbird, there is a drop down menu to choose an outgoing server, with no way to simply type in a new server. Or am I missing something? I think not, because others report the same problem. I have vague memories that awhile back, Tbird would you allow to specify all server to an e-mail account settings and then test their validity before finishing - a manual of against an automated way to set up an account.

  The main thing is I want to review the outgoing server of what I want, but it doesn't seem to be a way to do it.

  When your problem has been fixed can you mark the thread as "solved" Please?
  Thank you.

• Error message 'invalid base64 in continuous response data' when you try to access the mail server

  Under Thunderbird 16.0.2 Mac running OS 10.5.8 that worked perfectly for 6 years. Today I suddenly can't connect to the mail server Westnet (Western Australia). Automated or manual sending my password Gets the response "the password sending has failed. "Mail server mail.westnet.com.au replied: data not valid base64 in continuous response.

  I always have access to the web and can access my email via the web portal of Westnet or using the Mail from Mac client. Using Thunderbird but I can not connect.

  This sounds like the server think your already logged in. Try to turn off the machine for 10-15 minutes and have a cup of tea. This should be long enough to force a timeout if there is something hung up at the end of westnet and try again.

• Keep the IP if the DHCP server is offline now

  We have a customer who wants to be able to manage the IP addresses of all devices with DHCP, but the devices are supposed to keep their IP forever after the DHCP server has been taken offline. Is this a behavior that we can support on a controller of NOR?

  If this is not a configurable behavior an alternative could be to have controlelr auto configure to the last known IP if no such is acquired... but the VI apply network settings doesn't seem to work if done on the controller itself. Is this correct?

  With NEITHER in Norway (thanks), I found a solution which allows us to implement the required behavior.

  The main problem for us once we need to override the default behavior for DHCP was the fact that the RT apply target Network Settings.vi does not work if it is set to target the same controller as it is running. So how to exchange between DHCP and fixed? Well, it turns out that the network settings are also stored in the file of ni - rt.ini. So here's what we do: when the controller starts, we check if it is running in DHCP mode. If this isn't the case, we change this in the file nor - rt.ini and the reset - to see if the DHCP server is operational. If the controller is running in DHCP, we check if the IP address is valid (i.e. outside the local range of link). If it isn't read us the last known IP address and write those set in the file nor - rt.ini and restart.

  An example of the sections of the INI file:

  For DHCP, the section of the nor - rt.ini will look like this:

  [TCP_Stack_Config]

  USE_DHCP = DNS_Address

  Gateway USE_DHCP =

  USE_DHCP = Ip_address

  USE_DHCP = Masque_sous

  For a static IP address:

  [TCP_Stack_Config]

  DNS_Address = 0.0.0.0

  Gateway = 10.0.18.1

  Ip_address = 10.0.18.13

  Masque_sous = 255.255.255.128

  It would be nicer than the network RT target apply Settings.vi would work for auto-reconfiguration, but it saved the day for us at least in this case.

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• If Server 2003 sbs spoil, 2003 standard server can take over and become the primary server?

  If Server 2003 sbs spoil, 2003 standard server can take over and become the primary server?

  Windows Server 2003 SBS is our 'old Machine '.
  Windows Server 2003 R2 Standard will be our "new extra Machine.
  = 2 different machines

  1. can I install additional Windows Server 2003 R2 Standard to an existing Windows Server 2003 SBS as backup domain?

  2. given my Windows Server 2003 SBS is an old machine, keep crash or auto restart or if existing Windows Server 2003 SBS unable to start, spoil, a new Server Windows 2003 Standard R2 can take on the domain controller, and becomes the principal server?

  3. after my old fixed my Windows Server 2003 SBS, can join Windows Server 2003 Standard R2 domain?

  4. you have any side effect or the limitation of SBS and Server Standard on working together in 1 area?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows Server general forum:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Concerning