on the virtual hardware noob question, pls help

Similar Questions

• Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Go to Adobe Creative Cloud

  
  

  Hi Rita,.

  For 1 EUR costs please see Adobe Store | Order FAQ and your online payment

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• SAS Logic Controller / update of the virtual hardware

  so I did experiments with virtual hardware, logic SAS SCSI Controller in the virtual machine and enhance network drivers.

  First it is just me, or is this a VERY intensive upgrade, you must install the NEW vmtools, then stop, then upgrade the hardware (this is why I have experimented with the realization of the upgrade, and then Tools, which works very well).  However, using even a NEW CD of Windows install (2003) and the floppy disk controller, the SAS drive is not recognized.  I can add it during the 'press F6 for new controller... ". "blah blah blah... but he said some people found hard drives, as well as change the controller, despite having installed drivers with the tools of the NEW virtual machine still cause the OS to blue screen, inaccessible device.

  So now the question arises, someone understood what driver to use for this?  They should be, but they do not seem to work, FTM

  SAS controller is also required for the Windows Clustering 2008 because the old LSI adapter will not work (lack of support for SCSI-3).

• Converter error when you change the virtual hardware...

  Convert the task runs at 97% then fails with the following text in the log:

  Val = {(converter.task.TaskInfo)

  dynamicType = & lt; unset & gt;

  key = "task-4."

  task = ' converter.task.Task:task - 4',.

  name = "convert."

  descriptionId = "Convert.P2V."

  userName = "xxxxxx.xxxxx"

  source = "xxxxxxxxxxxxxxx";

  target = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx."

  State = "error"

  canceled = false,

  cancelable = true,

  data = & lt; unset & gt;

  error = {(vmodl.fault.SystemError)

  dynamicType = & lt; unset & gt;

  reason = "SSL Exception: BIO Error."

  MSG = "a general error has occurred: SSL Exception: error BIO.

  We do a test P2V on some Cisco Unified Messaging servers - hardware is HP/Compaq server with a Windows 2000 Server operating system.  The server operating system is changed from Cisco by what I said.

  Kind regards...

  Jamie

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

  Remember, if it isn't one thing, it's your mother...

  jamieorth,

  Can you provide the logs as an attachment to this topic?

  Windows 2000 generally fails to 97% for a variety of reasons and next to these fall into being a "reconfiguration" of the fault.  If the virtual machine is the surplus on the destination, we are able to complete this last 3%.

  Here's a few kbs for breaches of 97% example:

  http://KB.VMware.com/kb/1006295/

  http://KB.VMware.com/kb/1001620/

  http://KB.VMware.com/kb/1006858/

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• See Virtual Machine role cannot accommodate the virtual machine is on. Help please.

  Hi all. I'm trying a re-branded minimum permissions to a group for some virtual machines. The role of Virtal Machine user seems to be a perfect fit. The only problem I have is that the user can't see what host the virtual computer is on. If they are in the VMware Infrastructure Client and click on the Summary tab, it is empty. The reason why I want to see them is if they need to use a CD-ROM to install an application in that they need to know what a host to the CD. Can someone tell me which box to check if I go and change the role? Is there a better way to do it?

  Any help is greatly appreciated.

  Welcome to the Forums!

  If they have access to the virtual Center and the access flag to the virtual machine itself, why not just mount the .iso/CD on the computer virtual in question then disconnect when you are finished.  Having to put a CD in an ESX host, every time something must be installed not the ideal way

  If you have found or any other post 'useful' or 'proper' Please consider awarding points.

• Poor performance of the virtual computer. Questions RDY %

  I installed an environment to ESXi 4.1, and less than a week that I started getting complaints that some virtual machines were slow. Using ESXTOP moment RDY % is usually great, as in simple figures. Then there are times where it spikes up to 80% or hangs around 50% for about 30 seconds.  I know not all the virtual machines have VMTools updated may cause CPU scheduling questions?

  Never, I followed this environment in the past, so I don't know if they had a CPU contention before this upgrade or not, I'm going strictly by the comments of users.

  TurboIT wrote:

  I installed an environment to ESXi 4.1, and less than a week that I started getting complaints that some virtual machines were slow. Using ESXTOP moment RDY % is usually great, as in simple figures. Then there are times where it spikes up to 80% or hangs around 50% for about 30 seconds.  I know not all the virtual machines have VMTools updated may cause CPU scheduling questions?

  Never, I followed this environment in the past, so I don't know if they had a CPU contention before this upgrade or not, I'm going strictly by the comments of users.

  No, the VMware tools backdated wouldn't interfere.  In fact, you don't have even the VMware Tools installed to a virtual machine running normally.  Will pass you right next to the advanced features and performance gains unrelated to the CPU.  The CPU is the processor there is no driver for this specific to VMware.  Values of loans are quite specific - the virtual machine has something to see CPU wise and his waiting for access to the CPU.

  The physical number of nuclei in the home and what is it (Intel 5500 or 7300 etc.)?  How many virtual machines?  How many virtual processors assigned to hospitality?   How many VMS are multi-CPU?  What is most vCPU per VM on the host?

• Update of the virtual hardware using the SDK?

  We are converting 2.5 VC to vSphere 4.0, and I'm curious to know if it is possible to automate the process of updating the hardware virtual of our VMS version 4 to version 7, so that we can start using them in an environment vSphere with all the bells and whistles. To be clear, I'm trying to know if there is a way to use the Perl API to duplicate the results I would get by right-clicking on a virtual machine in the VC and selecting "Update of virtual hardware".

  Yep, you'll need to get a reference to an offline VM and then call the UpgradeVM_Task method and specify the version, and in this case it will be 7

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Failed to initialize the blackBerry Smartphones... pls help

  first thing this morning, my fone was very good and I sent a message and after that the initialization has failed came, I took out the battery and sim, put them back in and restarted, rang the (several times), vodafone and they said to call the store with her, then shop and they called vodafone, nobody knows what it means... vodaone rang me this Eve and connected to my computer and device software and "the computer updated and said that when he moved, it will be fine... and they ring me in the morning and if it works not to put in the shop again... don't think I can take much more than this... all I want to know is what that '" "' INITIALIZATION FAILED" "' mean?"  Can anyone help pls?

  I figured this out - shop could not understand wat was wrong and neither couldn't vodafone - I had to replace my SIM... it's simple

• I can't do anything after the installation of El Capitan PLS HELP

  I have an IMac, 21' 2013, 4 + 4 GB ram with 1 TB of storage

  After the installation of el capitan, I literally can't help

  computer now start in 20 minutes or more

  Once started, it takes another 20 minutes to load the app in launchpad

  When I try to open the prefereces system a report saying that an error has occurred and I can't open the preferences

  each mouse click, click of each keyboard, each single entry take me to the spinning wheel of death...

  an application can take an infinite time to open or to stop smoking or to do something

  browser works, a unique planning take minutes to open, close, load, updated (my adsl is fine), plugin continue to stop

  even to stop takes 15 min...

  I tried to reinstall, new facility (several times), os x recovery (several times), with or without backup time machine... I can't understand...

  Please download and run Etrecheck http://www.etresoft.com/etrecheck and send the report to an answer here.

• Assistant of the output instrument always 0.0 without input series, where's the trigger? -Noob question

  Guys keep with me, I'm another PLCs and VB/C programmer, there are still the old paradigms of locking my head.

  See attached vi. After that I disconnected the entry in the series, the wizard exits still instrument 0,0 to its terminal at regular intervals about 1 hz. Now how does the wizard output always inst 0.0 without a trigger entry series? There must be a timer somewhere... but I searched everywhere there is no timer, including by opening the front panel of the wizard of the instrument. I watch the whole bulk of the loop and block VISA etc, there is no synchronization setting.

  So my question is, if there is no entry of series by using the instrument, which is the parameter object that triggers the instrument Wizard still out 0,0 at regular intervals? Where the object/setting?

  

  Thanks in advance

  Great big thank you! I can sleep tonight! Muahahahahahha!

• How can I change the size of my screen so the arrows left/right and tr side slide bar is visible. my monitor is 17 '' and the program opens too big, Pls HELP!

  My screen is bigger than my monitor 17 ". The right side is off the screen, so I can't scroll. I can barley click the left arrow to return to the previous page. Help! I've been waiting. !!!

  Hello

  see if the monitor has a reset button auto on it

  and read this;

  try changing the screen resolution 1 before update drivers

  It can only be the screen resolution settings

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have.

• access quick and stupid question, pls help

  where can I find and run the Configuration Wizard of Cisco Unity Message Store

  \commserver\ConfigurationSetup\setup.exe

• my box "lock the track" audio is missing Pls Help

  Hi guys, I was editing along, doing nothing out of the ordinary, when suddenly, the little box that allows you to LOCK the track disappeared. Here is a screenshot.

  

  See on the A1, the lock's part. How can I get it back? I can't move forward without resolving it. Thank you!!!

  NF

  You're not quite at the top of the Audio track.

  Move to the right side of the editing window audio track and move the vertical slider to the top.

  or...

  Drag the separator between Audio and video section a calendar to the top.

• Migration of VMS of vsphere 5.0 and 5.5. The virtual computer hardware should be upgraded?

  We have a few virtual machines to a roommate with a newer version of vsphere. Are there benefits to upgrading in addition what is listed in the link below? We have really no need for the maximum ram or cpu upgrades. I thought that now version 8 virtual machines should be fine, unless there is a major performance improvement or other reason to upgrade to 10.

  Hardware features available with the Virtual Machine compatibility settings

  You are on point with your comments. There is no need to upgrade to version 10, you if you don't need. This is why VMware is now calling VM Compatibility virtual rather than physical level. This is to remove the pressure of always trying to follow with the virtual hardware.

  By experience, I find the upgrade virtual hardware, one of the scariest parts of any upgrade project. Ive met a lot question after her that is why it is always recommended to create a snapshot prior to an update of the virtual hardware. Its the only way to restore.

• How to cancel the upgrade virtual hardware task?

  Hi guys,.

  Right now, we have a problem.

  Last week, we try to migrate a computer virtual from one server to another.

  We forget to type hard when you copy the files.

  vmkfstools-i /vmfs/volumes/4e7cbe71-9b013d2d-b735-001e67059c6c/EVSamsClub/EVSamsClubServer/FedoraTest.vmdk/vmfs/volumes/4e7cbe71-9b013d2d-b735-001e67059c6c/EVSamsClub d thin

  The correct is

  vmkfstools-i /vmfs/volumes/4e7cbe71-9b013d2d-b735-001e67059c6c/EVSamsClub/EVSamsClubServer/FedoraTest.vmdk/vmfs/volumes/4e7cbe71-9b013d2d-b735-001e67059c6c/EVSamsClub. VMDK thin d

  Then, we get an error message.

  http://screencast.com/t/kf5vSY4A2R3

  And then we hit the virtual hardware to update. Now a week past and the VM still under upgrade virtual hardware.

  It cannot be cancel and we can not delete the virtual machine.

  See here:

  http://screencast.com/t/76nDz2CpLWXe

  Right now, we want to just cancel the upgrade process and delete the virtual machine.

  Any suggestion?

  Who is King

  Zigange

  Hard shut down the virtual using the vSphere client. If it does not migrate all other virtual machines off the coast of the host, then turn off the host. When you restart the host, you should be able to remove the virtual machine as the processes that are running against her will have stopped.

  Kind regards

  Paul