on the vsphere virtualcenter database

Similar Questions

• Can't see resource calculate in the vRA, even if the vSphere Agent log shows a cluster

  I'm debating on the issue of whether the question should be minimal vRA installation requires anonymous authentication in IIS?  Or am I crazy?  I let you choose how to respond.

  This is a new installation of minimal vRA 6.2.1 new identity applice, vRA device and a single server Win2012R2 for all roles of IaaS. Gentle and the pre - req check tool was happy before you install it.

  However, when I went to add an endpoint yesterday for the vSphere Agent, I installed, I get the following error in the logs of vRA:

  Exception occurred retrieving the work of VRM: request the HTTP is unauthorized with client authentication scheme 'Anonymous '. The server received authentication header was 'NTLM, Negotiate. " Inner exception: the remote server returned an error: (401) unauthorized.

  A minimal installation uses anonymous authentication?  The pre - req just had check tool has that disable and use Windows authentication with the suppliers of the following order: NTLM, Negotiate.  Hmmm..., well although perhaps I'll activate anonymous and restart the agent of vSphere and see what happens.  I restart the agent and now I only get an error on the authentication and the following of the vSphereAgent.log seems to say that the endpoint is communication and a cluster of back of the vCenter:

  [03/31/2015 10:22:08] [Debug]: Thread-Id: 10 - Ping sent successfully: [<? xml version = "1.0" encoding = "utf-16"? > < pingReport = "vSphereAgent-XXXXXX" CurrentVersion "6.2.0.0" = Nom_agent agentLocation = "VRAIaaSServer01" WorkitemsProcessed = "0" > < Endpoint externalReferenceId = "F86349A2-B8D7-4E17-9599-CC4F5C9E94B3" / > < nodes > < node = "ClusterName" type name = 'Cluster' identity="XXXXXX.mydomain.com/vCenter 5.5 Test/host/NOMCLUSTER" datacenterExternalReferenceId = "data center-21" isCluster = "True" managementEndpointId = "72195415-bdb6-4f7a-a3ac-92b9c4eca960" / > < / nodes > < AgentTypes > < AgentType name = "Hypervisor" / > < AgentType name = "vSphereHypervisor" / > < / AgentTypes > < / pingReport >]

  [03/31/2015 10:22:08] [Debug]: Thread-Id: 10 - Ping completed report

  However, when I navigate to compute resources under endpoint, vRA shows no clumps.

  What happens one? I'm going crazy?   Well, maybe, but actually part of the problem is that calculation of resources are not displayed when you think, until you go to groups - fabric groups and then check the clusters that you would like to use vRA.  Now when you navigate to calculate the select cluster resources will appear.  {shakes head and face Palm}

  The lesson is, so don't forget the section group of fabric with the addition or subtraction of compute resources.  In addition, it is perhaps orphan computing resources in the database.  The following KB may help solve this problem.  VMware KB: deletion of an endpoint in vRealize Automation fails with the error: the endpoint is used by comput #...

  Hope this helps some that can run into questions adding vCenter endpoint computing resources.

  Hey Sean,

  OK on one of my IIS servers

  At the level of the server host level anonymous authentication is the SSO is enabled

  Move forward in websites - Site by default - Windows authentication is the only thing allowed

  For the repository - anonymous and authentication Windows are enabled

  for the vcac - forms authentication is the only permit

  For the WAPI - anonymous and Windows authentication are enabled

  Who help me?

• The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  I tried all listed in other postings, but our VSphere 4 server resides on a SQL server server.

  I tested the connection odbc with the SA password and it works, it rebooted several times now, tried to stop all services and bringing up one at a time, but whenever a dependency is not. I get this error in the system log, the VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  And

  VMware VirtualCenter Management Web Services service depends on the VMware VirtualCenter Server service which failed to start because of the following error:

  The service has returned a service-specific error code.

  Application log says this

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  I don't know how to fix it. It was working fine yesterday. Nothing has changed. Or has anyone experience this problem and have a solution?

  see if that helps

  http://KB.VMware.com/kb/1015101

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• Exception occurred in the Microsoft Access database engine: the field is too small to accept the amount of data you attempted to add.

  Hello

  I try to save a path in a table in an access database, but an error occurs:

  "Exception occurred in the Microsoft Access database engine: the field is too small to accept the amount of data you attempted to add." Try insert or paste less data. "in create a NI_Database_API.lvlib:Rec - Command.vi-> NI_Database_API.lvlib:Cmd Execute.vi-> NI_Database_API.lvlibData.vi B tools insert-> project total.vi.

  I've attached a JPEG of a part of the code and the code, but it won't work because the database is not attached,

  any help please?

  Ok

  I solve the resized problem.i column size

  Thank you

• Error '80004005', an Exception occurred in the Microsoft JET Database Engine

  Hello

  I use Microsoft Jet 4.0 OLE DB Provider for storage in the database file Microsoft 2000 (.mdb file) for the past two months with no problems, now I get the error '80004005', of Exception occurred in the Microsoft JET Database Engine: could not open the database. It may not be a database that your application recognizes, or the file may be corrupt. I study some forums but could not get a definitive answer as to why this might be happening.

  Please, help me to understand this error so that I can avoid losing data in the future.

  Thank you

  Guilhem

  It is impossible to say when the problem occurred, but as Dennis said that Jet is not a robust database. It falls particularly in situations where is is called to manage large sets of data or be accessible from multiple users at the same time.

  In terms of alternatives, they are many if you want to go this route.

  Mike...

• What is the average of database in internet.

  What is the average of database in internet.

  Hello

  WiFi - database
  http://en.Wikipedia.org/wiki/database

  Of course a database can exist on a Web site and can be accessed via the internet. Answers is essentially
  a database.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to integrate the CCM user database unit

  Is CCM and the unit with a ldap user database, possible to integrate? and how

  BTW, if you add a Subscriber in the unit, is to add a user to windows Active Directory.What is the password for this user AD?

  HI -.

  The permissions to allow the unit to create objects user AD, groups and distribution lists are made by running the wizard of permissions of the unit as well as configured when you install the unit (for example, you specify if you want to create user objects, or simply import subscribers, which is how we do it). The default password for the Windows account of the user of the AD is listed in the template of the default subscriber passwords, domain Windows Password Settings section. For security reasons, it must be changed to follow the policies of your organization password. You can change this by creating a new model, based on the default subscriber, with a new Windows Password Settings that gets applied to new subscribers as they are created or imported. The unit is not a LDAP database, it uses the Active Directory database. Database SQL of the unit is synchronized with the information in the AD. CallManager uses its own telephone directory and user information or can use AD. We chose NOT to incorporate the MAC with AD. It is a personal choice for us - we didn't want to CCM or unity, creation of user objects. Maybe it's a different look for a Messaging voice only implementation rather than Unified Messaging. I can't deal with your issue on the integration of Cisco databases and unity.

  Best wishes

  Ginger

• access the sql server database in my widget

  I just started to build widgets for blackberry in visual studio 2008 and I want to know if its possible to use data from the sql Server database server in my widget and how can I do?

  You can consume data in a WebWorks app server-side.  One way to do this is to build a Web Service that, when it is called from your application, queries the database and returns a list of results (for example in XML or JSON format).

  You already have the data in your available through Web Services SQL Server database?

  Another way is to produce a web page server that displays the data from your SQL Server database and load this web page from your application WebWorks.

• DIRT and what his role with the MS - SQL database

  I am setting up the procedure for the Bare Metal Restore for our Telco servers. And I wonder if the DIRT back up the MS - SQL databases.

  We have 4.0 (4) SR1 and use DIRT 1.0 Build 122

  Thank you

  Debbie

  Restoration of dirt requires that the unit (same saved version) is running before, it'll do a restore - as these UnityDB and ReportDb databases must be present - restoring pulling data out of the local DBs first before their replacement by the saved tables (without things like the name of the local server, which GC/DCs we are connected) configuration etc...). So no, it won't it create on the fly because the restore cannot function without a server in operation of the first unit. This isn't just a backup and restore, but also a type migration tool.

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• Problem with update of a column by using the procedure of database and refreshing or put in value programmatically

  Dear all,

  I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.

  I have a page that consists of two taskflows.

  First workflow has a fragment which is to have a table based on view object salespersons (not editable)

  Second task flow contains a form of ADF from the same view object Salespersons.

  As the user selecting a line in the table of the same record is displayed as no problem.

  Now, I have added two buttons Activate and Deactivate that is to change the status of the sales.

  I tried to use two ways an updated using the procedure of database and then put in value by programming and I have different questions with two of them:

  Now, here's the code of the Java bean for activation:

  Option A - the problem with this is the value of the column in the list (the first task rate displayed) is not synchronized

  and Activate and Deactivate buttons are not disabled and active properly.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  Links BindingContainer = getBindings();

  OperationBinding operationBinding;

  operationBinding = bindings.getOperationBinding ("changeSalespersonsStatus") (OperationBinding);

  operationBinding.getParamsMap () .put ("pId", vId.getValue ());

  operationBinding.getParamsMap () .put ("pStatus", "A");

  Object result = operationBinding.execute ();

  dcStatus.setValue ("A");

  } else {}

  return;

  }

  }

  Option B - the problem with this is that the value of input for status text appears in the Active form for all records in form regardless of its database.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  -no doubt this two lines are not needed here

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  dcStatus.setValue ("A");

  BindingContainer links = getBindings();

  OperationBinding operationBinding;

  the operationBinding = bindings.getOperationBinding("Commit") (OperationBinding);

  Object result = operationBinding.execute ();

  } else {}

  return;

  }

  }

  Here's the code from the Fragment of shape for used buttons.

  "< af:button text = 'Activate' id ="bActivate' icon="/icons/activate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonActivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= ' n '} ">"

  < af:showPopupBehavior popupId = "pActivate" / >

  < / af:button >

  "< af:button text = 'Disable' id = 'bDeactivate' icon="/icons/deactivate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonDeactivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= 'A'} ">"

  < af:showPopupBehavior popupId = "pDeactivate" / >

  < / af:button >

  Here's matching Popups for each of the buttons Activate and Deactivate.

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pActivate" >

  < af:dialog id = "dActivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmActivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to enable the seller?" id = "ol1" / >

  < / af:dialog >

  < / af:popup >

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pDeactivate" >

  < af:dialog id = "dDeactivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmDeactivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to disable the seller?" id = "ol2" / >

  < / af:dialog >

  < / af:popup >

  Thanks in advance.

  Best regards

  Arif Khadas

  If you bind components to a range of flow page bean. You must complete that it saves the State of the component longer than the life of the component.

  To change the value of the GET value of the component of the link layer and change it.

  In this way the changes are captured by the framework and you should see them.

  Timo

• AGAIN starts after only one physical disk has several partitions makes no sense to the production oracle database?

  Dear Experts,

  Don't + REDO1 diskgroup have only one physical disk has several partitions makes no sense to the production oracle database?

  For example

  • + Diskgroup Redo1 have 2 50 GB disks (fact these 2 discs are the same physical disk partitions OR these should be separate disk as recommended approach)?
  • + Diskgroup Redo1 have 2 drives of capacity 50 GB (for RAID 1 + 0)
  • + Diskgroup Redo2 have 2 50 GB disks
  • + Diskgroup Redo2 have 2 drives of capacity 50 GB (for RAID 1 + 0 )

  Thank you and best regards,

  IVW

  Hello

  Partitioning your disks for ASM configuration as 'A' might make sense. If you lose one disk, you have the discs to another.

  'B' totally make sense if you have lost the disc that you have lost all group ASM and you need to change this with something like 'C '.

  But obviously you need redundancy ASM configured appropriately.

  

  Kind regards

  Juan M

• Is it normal to have more than 2 starts in the production oracle database?

  Dear Experts,

  East - the best prractice to have only 2 starts for the production oracle database

  for example

  + data

  + FRA

  Thanks in advance,

  IVW

  IVW wrote:

  Thanks Aman

  Segregation starts may travel on these factors

  • 1. the speed of the disks (redologs online had to be faster disk)
  • 2. the redo of multiplexing files
  • 3. the multiplex control files
  • 4. after archivelogs on another disk
  • 5. other than the DATA + and + FRA

  Yes, but 2-4 points can be met with groups of two discs as well - + data the primary file hosting and + FRA accommodation multiplexes copies.

  Aman...

• The configuration registry database is damaged

  When I try and install .NET framework 3.5 it fails installation and said this

  the configuration registry database is damaged

  Hello

  Thank you for giving us the opportunity to help you.

  I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. The place where you want to download .NET Framework 3.5?
  2. You are able to install Windows updates?

  According to the description of the problem you are facing problem in installation of .NET Framework 3.5 on your computer. This error: "the Configuration registry database is corrupted" is caused by the operating system files are damaged or because of the structure of the broken system registry.

  I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.

  Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 8.

  1. Press Windows key and X at the same time.

  2. Choose line (Admin) command on the shortcut menu.

  3. At the command prompt, type sfc/scannow and press ENTER.

  4. Exit the command prompt.

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  I suggest you to try the suggestion provided in the article mentioned below and see if it helps you to solve the problem.

  Setup of .NET framework 3.5 error: 0x800F0906, 0x800F081F, 0x800F0907

  If the problem persists, try to install .NET Framework 3.5 on Windows 8, Windows 8.1 and Windows 10 from the link below.

  Installation of .NET Framework 3.5 on Windows 8, Windows 8.1 and Windows 10

  Hope it would help. If the problem persists post returns with the required information, the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards